LabVIEW GOOP for Excel

Similar Questions

• LabVIEW VIs for HP 35670 has

  The link to the labview for HP 35670 A screw is no longer valid and the same search returns nothing.  Does anyone have the Labview VIs for this instrument?

  The last message is in 2004 (see below)

  The instrument for the HP 35670 A driver is only
  supported under LabVIEW 6 and 7. You need to upgrade to the latest
  version of LabVIEW to use the HP 35670 A driver or the
  drivers newer than we release in the future.

  The instrument
  Driver for HP 35670 A can be found on our website at
  http://zone.NI.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/61f1c707c2f10906862568ab005fb9ff?OPE...

  Why don't you go to the Instrument Driver Network? I don't know what kind of research did you, but the driver is still available and can be found by using the search option here.

• Can LabVIEW Embedded for ARM works with any Board or just with a few predefined?

  Hello

  Can LabVIEW Embedded for ARM works with any evaluation committee or just with a few predefined (MCB2300, MCB2400 and EK-LM3S8962)? I ask this question because even if I chose "another processor" in the definition of the new project only 3 options are the corresponding arm of Phillips and LuminaryMicro.

  Thanks in advance,

  Howdy,

  LabVIEW for ARM supports the feature of targets for tier 1 (the mentioned Evaluation Committee) following this schema:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7066

  But you can transfer to other weapons if you follow this porting guide:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/6994

  The uProcesser SDK is intended for the port of other targets of DEPENDENCE (32-bit, of course) and technically it covers ARM as well. Alternatively, there are the LabVIEW C Code Generator: http://sine.ni.com/nips/cds/view/p/lang/en/nid/209015

• LabVIEW Interface for installation of the Arduino

  I want to install the LabVIEW Interface for Arduino Toolkit, so I can control an Arduino Uno R3.  Say the instructions to download and install the VIPM and then you can download and install the Toolkit through the VIPM.  The only problem is that workplace of our company doesn't have access to the internet for security reasons, so the VIPM will not be able to download the Toolkit.  How can I download manually the Toolbox for a laptop without LabVIEW, save it on a usb key, then install manually on the workstation with LabVIEW?  Any help would be greatly appreciated.

  I asked the very question sometime back and here is the answer I received. I decided to use another computer on the network for the work of the Arduino, so I never tried what was suggested.

  Let us know how it turns out.

• LabVIEW parallel for loop and OpenMP

  Hello:

  It's just a curious post, I just learned about OpenMP and I found that OpenMP helps you to parallelize loops in c about the same way that you can use the loop For parallel in LabVIEW.

  The loop For Parallel LabVIEW is being implemented under the hood using OpenMP? Or is it just a coincidence?

  No, it is not implemented LabVIEW parallel for loop under the hood using OpenMP. You might be interested to read this article on modern developments in the LabVIEW compiler architecture. Specifically, in this case, it's the DFIR technology discussed here that facilitates parallel for loop transformations.

• HPC for Excel - get the exception when running the diagnostics

  I was wondering if anyone would be able to provide assistance with the issue I am dealing with the help of HPC (2012 R2) for Excel (2016).

  I started a new Setup and all made in the paper, as shown here on the Microsoft Web site: start with HPC server (this site is not allow me to paste the link here). I have a test cluster consisting of 1 head node, 1 compute node. The domain controller is on a separate server. All have Windows Server 2012 R2 64-bit installed and installed using the deployment of Excel 2016 32-bit Office tool. I have installed HPC Pack 2012 R2 Update 3 on the head node and compute node. The problem is when I run the Test of the Excel of Diagnostics of HPC Cluster Manager Configuration, the test fails for the two nodes (i.e. the head and calculation). For the head node, I get an exception with a long error message that ends with some problem with "ExcelClient.Dispose". On the compute node, the error is that she could not invoke service 'Excel '.

  I think I have done everything exactly according to the instructions and followed other steps that have helped me in a successful test deployment. Any help to understand what I am doing wrong will be greatly appreciated!

  Hello

  I suggest you post your query on the TechNet forums to get help. Consult the following link:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserver8gen

  It will be useful.

• Ev3 addon for LabVIEW 2014 for education

  Hi guys

  I bought a 2014 LabVIEW for educational license.

  Now I would like to program a LEGO EV3 brick.

  But when I want to start a new program, I am only able to connect to a LEGO NXT brick.

  I tried to download the new addons of LEGO, but it does not work.

  You can give me an advice what to do?

  Thank you in advance.

  Hi Bunraz,

  have downloads you tried? This one for EV3?

  Community: NOR LabVIEW for LEGO® MINDSTORMS® / LabVIEW add-on for LEGO MINDSTORMS - download - National Instruments
  https://decibel.NI.com/content/docs/doc-15615

  and then on the following link?

  Module LabVIEW, 2014 for LEGO MINDSTORMS - National Instruments
  http://www.NI.com/download/LabVIEW-NXT-module-2014/4761/en/

  Can you give me a detailed description on what does not work? Or a small step by step what you do?

  You can attach a screenshot of the parts that don't work?

  Most of the examples that you find in LabVIEW is valid for NXT and ev3, so for example go to

  LabVIEW > examples > Modules and Toolkits > Robotics NXT > display > Simple Display.vi

  and it is executed, when your EV3 is connected to your computer by USB. It simply must start.

  Cheers, Niko

• Automatic update failed for Excel 2003 (KB959995)

  After the initial update indicates a significant update was not tried again. She's not too, and I got code error 80070643. Who directed me to go to Services and check the engine for Service Bureau, set it for auto - delayed start and start it. However, I found that it was running OK, but did change the automatic setting - delay and left it running. Then, I rebooted the PC in the case where the other updates is in conflict with this one.

  I then tried to reinstall the update from Windows Update, and again once it failed with the same error code. I checked again the services and the OSA works well. Help!

  Under Vista Home Premium and Office 2003 w/SP3 on an AMD Athlon 64 3500 2.21 GHz and 4 GB of ram

  Hi Bergie532,

  See:
  http://support.Microsoft.com/kb/959995
  "MS09-009: Description of the update of security for Excel 2003: 14 April 2009.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ My Blog: http://blogs.dotnethell.it/vincent/

• Long-term file types (i.e., 'Microsoft Visio Drawing') vs short ("XLS" for Excel files) displayed in a detailed view of the folder

  In my point of view of folder, file types include long-term (i.e., "Microsoft Visio Drawing" and some are abbreviated ("for Excel files XLS).) Before this machine, all my types of files have been long-form... How can I get the form long back for all of my files?

  Have you tried to create a macro - see this

  http://www.MrExcel.com/Forum/showthread.php?t=525026

  If you save stencil files and model that are designed to work together, to ensure that their design page, styles, and colors settings are compatible. For more details, see http://msdn.microsoft.com/en-us/library/aa200991(v=office.10).aspxChapter 10, Managing Styles, sizes, and Colors.

• Need access to the Q: drive that contains the Microsoft Starter 2010 for EXCEL, Word files, etc.

  Cannot access the Q: drive which has the 2010files MS Starter for EXCEL, Word, etc. Attempted to change the property. Access denied. Signed as an administrator and the only user of the computer.

  Anyone?

  You can not, as says Gordon is a virtual drive, the end user does not have access to it.

  And no sound does not contain the files Office Starter

  Try here http://office.microsoft.com/en-us/starter-help/update-repair-or-uninstall-office-click-to-run-products-HA010382089.aspx

• Is it possible to export a SR for excel or csv?

  Is it possible to export a SR for excel or csv?

  Hi User537081,
  Welcome to the community!

  NOTE 1496117.1     I miss the tab reports - how create/make/access reports in My Oracle Support explains some options considered, including excel export.
  Please take a look at this document.

  Thank you
  Jörg

• Looking for best software Acrobat Writer/Conversion for Excel 2003.   I have Standard but you want to update.  Anyone have any ideas?

  Looking for best software Acrobat Writer/Conversion for Excel 2003.   I have Standard but you want to update.  Anyone have any ideas?

  Hi Dennis,

  Acrobat CC is not compatible with MS Office 2003 and currently, we only sell Acrobat DC. However, if you opt for a subscription of Acrobat DC you can install and use Acrobat XI that is compatible with Office 2003, but only to a certain update.

  Please check details of compatibility here: web browsers and applications of PDFMaker

  Thank you

  Abhishek

• Add-in for excel models

  Hi all
  I'm new to BI Publisher. Can someone tell me what I need to create templates in Excel? Maybe some plugins? I worked with the XML Editor, where the necessary thing for the creation of model using Word was Oracle XML Publisher Desktop.
  
  Version BI: 11.1.5
  
  Thanks in advance,
  Alexander.

  Oracle XML Publisher Desktop 11.1.5
  also work for Excel

• OBIEE 11 G equivalent to MS Publisher Desktop for Excel

  Hello
  I have a question. In Oracle Business Intelligence 11g has been developed a similar to MS Word add-in (generator model), but for Excel add-in? In other words, can I create templates and import since BIEE data also in Excel?
  
  Thank you

  Hello

  I don't think that there is anything similare to MS office template generator.
  The only way you can import items from catalog OBIEE is by using the add-in to office BI shown here:
  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/bi/BIEE/r1013/bi_addin/bi_office.htm#t2s1

  Concerning
  Adil

  Please give points and close the thread when your question is answered

• Out of the queue of SQL * Plus for Excel

  I'm out of the queue of SQL * Plus for Excel. The code I use is down. I want that all white space to carve when I open the updated file waiting in Excel. How can I ensure this?
  
  I was reading on the SET TRIM command, but it says that it does not affect the output queued. (http://ss64.com/ora/syntax-sqlplus-set.html)
  
  Is there a way to NOT display whitespace at the beginning and the end of a column in SQL * more? In other words, if I shoot a single column of a record, and a data element is only 3 characters in length, I want to be also 3 characters instead of extending over 40 characters across the width of the column.
  
  
  The column for your troubleshooting information
  IDNUMBER is NUMBER (12)
  FIRST is VARCHAR2 (40)
  The LAST is VARCHAR2 (60)
  
  
  Code
  SET LINESIZE 100
  SET PAGESIZE 0
  SET MARKUP HTML PREFORMAT ON
  set colsep,
  coil c:\prospects.csv
  Select '' perspective ID"', '" First"',""finally" "from dual;
  Select to_char (p.idnumber), p.first, prospect_view p.last p where idnumber = 164515;
  spool off

  DataHandle wrote:
  I'm out of the queue of SQL * Plus for Excel. The code I use is down. I want that all white space to carve when I open the updated file waiting in Excel. How can I ensure this?

  I was reading on the SET TRIM command, but it says that it does not affect the output queued. (http://ss64.com/ora/syntax-sqlplus-set.html)

  TRIM affects the expressions in your SELECT clause. It has nothing to do with the padding of SQL * Plus adds to align the columns upwards.

  Is there a way to NOT display whitespace at the beginning and the end of a column in SQL * more? In other words, if I shoot a single column of a record, and a data element is only 3 characters in length, I want to be also 3 characters instead of extending over 40 characters across the width of the column.

  Here's a way to make the main request:

  SELECT        TO_CHAR (idnumber)
  || ',' ||  first
  || ',' ||  last
  FROM           prospect_view
  WHERE        idnumber     = 164515
  ;
  

  This will include spaces only if they occur in first or last. Depending on your data and your requriements, you may need to use the FILLING (first) instead of the first, and/or TRIM (finally) instead of the last.

  Using this technique, it does not matter what is COLSEP: the query produces a single column.

  Use the SQL * more order

  SET  TRIMSPOOL ON
  

  to keep SQL * more add space after this single column.