LabVIEW VI controls don't bind to my dashboard OR data

Similar Questions

• I get the message: "this file has no program associated with it for performing this action. create an association in the control panel of binding together.

  Every time I try and open things on my computer, like internet explorer, windows player media, Aim, or my music etc. etc. files I get this message "this file has no program associated with it for performing this action. create an association in the control panel of binding together.

  I don't know what that means. He started to do so after we have some malicious and unwanted software on our computer. I thought it was because of the problems, but it didn't disappear after the computer has been fixed. Can I run programs as an administrator. But how do I get it back, just double click and the program opens as usual?

  Hi Justalilkink,

  See also the post made by SpiritX on January 24, 2010 17:32 in the link http://social.answers.microsoft.com/Forums/en/vistafiles/thread/086ab3bb-d764-4fb1-a6f3-205bff708e63

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to use labview for controlling the HP Network Analyzer

  Hello

  I have a HP network analyzer 8720D connect with my laptop by a USB-Gbspecifications FOR cable. I want to use LABVIEW for control to parser do measurement and data collection. What should I start? Where can I get the labview program to control the parser?

  Thank you.

  Help > find instrument Drivers. Then go to the Instrument Driver Network and read all the links on the use of pilots.

• Programmatically paste an image from the Clipboard into the LabVIEW picture control

  Does anyone know how to paste the image residing in the Windows Clipboard in a LabVIEW picture control programmatically?

  There is a method of the Application class that gets the image to the Clipboard. He was deprived in previous versions, but it has been made public in 2012, so I guess that this also works very well in older versions. At least in never gave me problems with my limited experience with it:

  

• How to use Labview to control the motorized turntable?

  Hello

  I am new to Labview and do a project that requires the use of labview to control the motorized turntable (XYZ axes). I need to use the Labview programming and have no idea at all. Need help, thank you very much!

  Lei,

  Everything said by others is correct and to do because they describe, at a given time. But I always approached these projects of motion control first by looking at the 'motion controller' (I hope you have a) and 'drivers' (what you need) between the computer/LabVIEW and engines decide what communications will be required for these devices and get an idea of the syntax of command and the language to use with them.  In some cases, the controller and the motor driver are integrated in a single unit. Heck, in some cases, they are even integrated with each engine.

  The motors can be the stepper motors or perhaps servomotors.

  In the case of drivers stepper (devices that provide power electronics to run the engines), many of them are run using only two control signals for digital called 'step' (a pulse train) and 'direction' (high-low level) and if it is possible to generate directly with the PC, it's an order of magnitude easier (if you have not already a library of available motion control to manage the generation of these signals and) the execution of the stepper motors) of having a "Motion Controller" between the PC and the "motor".  Engine drivers step by step usually can be configured that current engine and the size of the stage and sometimes for the other plus-moteur/driver-parameter setting. The configuration of these can be made with jumpers, switches or, for some drivers, with orders ASCII on some sort of port of communication, but in general these are values you download the installer once at the beginning and then never touch again if you do not need generally to have a full time available on their change communication path.

  In the case of the actuator drivers (once again the devices that provide power electronics to run the engines), many use a +/-10V control input analog signal, and, again, while it is possible to generate the signal directly with the PC hardware, a separate axes controller is usually much simpler and more robust.  In the case of a servo system, there is also a signal back to an encoder or resolver attached to the engine to be used by any device will exercise the motion controller in the system.  There are once again associated with the driver configuration parameters (and controller in this case, since it is part of the servo feedback loop) which must be configured at the start but once set up properly, they rarely need to be changed again.

  A movement controller which is separated from the PC often manage several drivers, and can often coordinate a movement between them. It will load the rise up/down of the engine speed as that changes. It will be followed by position of each motor. The servo system, but it will take the feedback signal and use it to adjust the speed/position/torque of the engine. The motion controller also deal with race and home or index of signals is usually on most lines of movement and provide information of the State of the switch to the PC.   To run the motor controller is then just a matter of chaining a set commands of (usually ASCII) to indicate how fast to run and how far to go (and direction) and by sending a command "do it." Then, ask you to keep track of the status of the process and the States of the switches.

  In many cases the builders of controllers of movement are a primitive way to communicate with the controllers of a PC with no additional software other than what they offer. With this you can at least have an idea of how different the controller commands and responses they produce. That you can start to build sequences of commands to perform the actions you want.

  You can then add LabVIEW to the mix and to understand how you can get it to send sequences of similar orders on the paths of communication that are available and respond intelligently to the information it receives in return for motion control.

• I am new to the ethernet communication using labview. I don't have any material. I have two laptop, I need to send and receive data through these 2 portable by using labview. Kindly help me on this.

  I am new to the ethernet communication using labview. I don't have any material. I have two laptop, I need to send and receive data through these 2 portable by using labview. Kindly help me on this.

  Dennis has already said: for a direct PC - PC connection, you need a cross over cable. If you connect through a router or a switch, you use a standard cable.

• Dashboard of data for LabVIEW with ad-hoc wifi?

  Hello

  We have a laptop and we run a LabView control and acquisition of data on this subject program. We would like to have access to some of the values of the "indicators through an android tablet, so during an operation manual tap on our facilities, we could see remotely what happens with some measured values in our application LabView.

  The ethernet port is not available on this laptop, it is used for a sensor. It has wifi and bluetooth adapter. What would be the easiest solution to access the LabView app on this laptop from the Android device by using the "dashboard of data for LabView" android app? For security reasons, this laptop can't access internet, but of course, we could all just put a near wireless router (and not connect to the internet), and the laptop computer and the android Tablet access the same wifi network. I guess it should work, Yes?

  Or is it possible to make a connection to wifi ad-hoc between the laptop and the Tablet and use the DataDashboard? Anyone has any experience with such a solution?

  Last question: or what a Bluetooth connection? Might work?

  Thanks a lot for the tips!

  Kind regards

  Hi man,

  I recommend you connect your tablet as you described.
  _________

  |                   | ---> Network---> sensor cable

  | DAQ App |

  | Windows | ---> WiFi---> gateway---> Tablet

  |                   |

  ---------------

  I don't think that it is possible to use the Bluetooth with the application of the dashboard of data for Android. I can't find any information on Bluetooth, only for the WiFi.

  Best regards, Stephan

• How to eject my iphone, or player card on my macbook air?  I don't want to disconnect and lose data...

  How to eject my iphone, or player card on my macbook air?  I don't want to disconnect and lose data...

  You won't lose data when you remove an iPhone, unless you're in the middle of the backup or synchronization of the device.

  If you see no activity in iTunes/Photos/etc... Then, it is safe to unplug.

  With a card reader (SD card?) you do drag the desktop icon to the trash. It turns into an arrow when you drag an icon ejector.

  Similarly, you can click Finder on the dock, then locate the reader on the left column and click on the "arrow" to the right of the device to eject it.

• Instalei o Adobe Illustrator trial no meu PC, mas quando EU o Ahmed nao don't demora nem dez segundos ele date alone

  Instalei o Adobe Illustrator trial no meu PC, mas quando EU o Ahmed nao don't demora nem dez segundos ele date alone

  Crash Applications CC immediately after launch

• LabVIEW for control unlimited, a camera and a light meter (Minolta T - 10A)

  Hello world

  I'm totally new in the use of data acquisition software, but I found out, I use LabView for continuous measures (intervals of 15 min for 1 month or maybe more), the thing is that I need to get pictures simoultanously (Canon camera EOS) and illumination (in lux) device: Minolta T-10 a vision series T-10MA. My question is what software LabVIEW do I need to buy (or my institution actually) in order to get this. I look at the options of LabVIEW software and cannot understand what is needed. Subsequently, I guess that I need controllers for each of the devices (minolta and canon). Can you please tell me if this is possible and how to do it. I would really appreciate it.

  Steph.

  The following items are required: LabVIEW full, all drivers of devices (including DAQmx and pilots of the Vision) and the Acquisition of Vision software package.

  The Minolta luxometer has a connector for a PC and some communication software (which I did not inspect) which, I suppose, would allow you to take readings.  There is a comment about current if the USB cable is connected - I don't check if there is a power connector on the luxometer (since you will need to leave it plugged in for a month, the same problem with the camera).  As far as the camera is concerned, I don't know if it is controlled from a PC - my experience has been with (the size of 640 x 480 pixels) video cameras, which are probably controlled by LabVIEW.

  As for simultaneous readings, it is something that LabVIEW did pretty well.  I advise you to consult a professional if it's anything other than a school project, maybe even hire someone to work a few week of.

  Bob Schor

• GPIB-USB-HS will recognize any instrument in LabVIEW but somewhat done in MAX - help

  Hello

  I'm having a problem getting my GPIB-USB-HS device to recognize instruments in LabVIEW.  The unit has been running year last on many instruments.  I tried the GPIB-USB-HS other materials too just to make sure it wasn't a defective unit.

  NOTE: I installed the latest drivers for NI-VISA 5.1.1 and 300 of NOR-488. 2 for Windows XP

  See the images below:

  It's the idsplay to the MAX:
  I'm not sure why there is a yellow "!" next to GPIB0::INTFC, I think it's an indication of my question.  However, note that the instruments connected to my GPIB-USB-HS are counted in MAX.  As you'll see LabVIEW 8.5 does not recognize them.

  

  I get this error Max warning when I try to open TOOLS > NI-VISA > VISA INTERACTIVE CONTROL:

  

  It comes to the image of my LabVIEW 8.5 window when I try to select a VISA of an instrument (including MAX recognizes):

  

  Any help would be much appreciated

  Thank you

  -Brian

  Thank you all for your help,

  Problem solved after hours of uninstallation and reinstallation of all devices/software from National Instruments.

  Once all programs have been uninstalled (with a disk cleanup on my unnecessary hard-maybe records)

  LabVIEW 8.5.1 has been reinstalled

  NOR-DAQ has been reinstalled

  NI-Visa 5.1.1 has been reinstalled

  NOR-488. 2 worm 2.7.3 has been re-installed (correctly)

  Now, LabVIEW recognizes all ports/devices and connects to the instruments properly once more.

  My question must have been installing LabVIEW 8.5.1 after already installing LabVIEW 2009.

  Somewhere during the installation of 8.5.1 - main post problem occurred.

  Thanks again

• Exit via LabVIEW tension control

  Hello

  I'm trying to control an AC output voltage of 0 ~ 250V using LabVIEW, but I could not find any device that makes this kind of operation and can communicate with LabVIEW. All available NEITHER Renault only operate in low-voltage (-10/10V) for the generation of signals. Nobody knows everything power or the method could make this function?

  Thank you!

  Kenny

  Really, you have not used your Google-fu if you do not find a programmable power of ca. Keysight and California Instruments are just two of several suppliers.

• LabVIEW digital control does not raise an event changed value when the button entry is hit

  I used to be able to type a value in a numeric control of LabVIEW, then press 'Enter' to trigger an event "changed value".  Then at some point, this no longer works.  I have to click elsewhere to trigger the event of value has changed.  The up and down arrow keys work always, but just typing a number then press enter does not work.  Is this a configuration settings got accidentally changed?  Help, please!

  
  

• This module requires a Lynxmotion AL5A robotic using LabVIEW arm control

  Hello world

  I'm a little confused about what NI LabVIEW toolkits to be used in order for me to program the arm Lynxmotion robotic. Somebody has arms lynxmotion robot programming experience using labview? What should be awared by selecting the correct tool boxes. Do I need to have the tools of design and simulation of control? What about embedded design modules? Please help me.

  Thank you

  Hi DK,.

  The Module digital output NI9474 high-speed Sourcing should be more than enough.

  In fact, we have a demo of work available by using the AL5D and NI CompactRIO. The concept should always be the same property.

  Best regards

  The Ilana Joshua

  Technical sales engineer

  NEITHER ASEAN

• LabVIEW picture control - many updates - memory problem

  Hello

  I have little experience with LabVIEW and am currently using a picture control in one of my applications.

  The idea is that some areas (rectangles) inside the image control that is updated all the time with different colors. (according to a parameters measured)

  I have a large loop that takes a shift register that contains the image control.

  I noticed that the operations of different 'draw the Rectangle' I am the scene are piling up so the memory continues to increase...

  I did a small sample program that demonstrates this behavior.

  I want to update the image all the time in simple control. How can I ensure that memory does not get stored? Are there functions with which I can replace a portion of the image control with a new pixel values rather than simply add these new values each time for the image control?

  Thank you in advance for your help!

  Hi k_tunsten,

  Just remove the register shift. The result is the same, but the performance is much better and will not increase the memory.

  OK this isn't really the same thing, but the indicator buffer puts the old image, so that it looks the same.

  It will be useful.

  Mike