Lack of base system device

Similar Questions

• Laptop HP ProBook s 4540: lack of Base system device drivers

  Hello

  Currently, I have a laptop HP ProBook 4540 s notebook PC (Energy Star) and found that my Base system device driversare missing. I have tried very hard to find, but in vain. Honestly, I don't even know not what they are or what they do, but I'm sure that I need them. Please help me if possible.

  PS This is my first question and sorry if the format is confused or lack of useful information. If there is a better way to format this issue please inform me and I wil try to do better next time.

   

  Hello

  Try:

  JMicron card reader Driver

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63637.exe

  If it fails, set the hardware ID.

  

• HP 6930p running Windows 7 Ultimate 64-bit: lack of Base system device driver

  I have a HP 6930p laptop running Windows 7 Ultimate RTM 64 bit version. I have a "Base system device (unknown devices)" in the device with a yellow exclamation point Manager. What is this device and is there a driver for it?

  The details of the device are:

  HW ID: PCI VEN_1180 & DEV_0843 & SUBSYS_30DC103C & REV_14

  Thank you.

  This is the map Reader_try Ricoh your driver for Vista 64 bit HERE

• Dv4-1430us: lack of Base system device drivers

  I just clean installed W7 Home Premeuim after a failed attempt of W10, it seems that I'm missing three "base system device drivers. I went to the HP page where the drivers are usually, but I don't see all the downloads.

  If the download page of is the mystery pilots BSD here? Windows Update can't find them.

  DV4 1430US

  Hello:

  You need this driver for the card reader (Base system Dev):

  This package contains the driver for the JMB38X Host Controller Card Reader to
  models of portable supported and operating systems. JMB38X card
  Reader supports the following types of media: SD, MS, MMC and xD.

  FTP://FTP.HP.com/pub/SoftPaq/sp45001-45500/sp45180 .exe

• HP ProBook s 4730: lack of Base system device drivers

  Hello world!

  A few days ago I received an error message that my device Base and an unidentified device system no longer have the drivers installed for them (Code 28). This can happen after my last update of Windows, but I'm not too sure. When I try to update the drivers of the device for each Device Manager, Windows cannot find a driver for the device.
  
  These are devices that are affected (not sure if you need the hardware ID, but I included them):

  Base system device
  PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880
  
  Unidentified device
  USB\VID_138A & PID_003C & REV_0086
  USB\VID_138A & PID_003C
  
  Don't know if it is also related, but my Standard VGA Graphics Adapter is also having similar problem and cannot start (Code 10):

  PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C & REV_00
  PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C
  PCI\VEN_1002 & DEV_6760 & CC_030000
  PCI\VEN_1002 & DEV_6760 & CC_0300
  
  I use Windows 7 Home Premium (64-bit).
  
  I saw that I can download the drivers from the HP site, but I'm not really sure which ones do I need to download. Some people recommend that you download the chipset, the audio media and network card drivers for my laptop to try to solve the problem.

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5060894 & swLangOid = 8 & swEnvOid = 4058

  I can compare the drivers with the names of device in Device Manager, if that's the best way to go about it. I wanted to just a few tips on the best thing to do.
  
  I have some knowledge of the software, but I don't mess with hardware very much, answers in layman's terms would be greatly appreciated!
  
  Thanks for your time. If you need some info on my ProBook, let me know.

  Hello:

  You need these drivers...

  Base system device:

  The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp60501-61000/sp60769.exe

  Unidentified device:

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  FTP://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59624.exe

  Standard VGA Graphics adapt:

  This package provides the AMD video drivers, driver audio Control Panel and HD for laptops taken in charge who are running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55947.exe

• Lack of base system device driver

  I have an old HP dv6403cl laptop running Windows 7 32 bit.

  Product number is: GA381UA

  Hardware ID are as follows:

  PCI VEN_1180 & DEV_0592 & SUBSYS_30BB103C & REV_0A
  PCI VEN_1180 & DEV_0592 & SUBSYS_30BB103C
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  and

  PCI VEN_1180 & DEV_0843 & SUBSYS_30BB103C & REV_01
  PCI VEN_1180 & DEV_0843 & SUBSYS_30BB103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  If someone give me links to the appropriate driver software, I would be very happy. Thank you

  Missing/unknown 'Base system device' is the Ricoh 5-in-1 card reader. You can try to use the Windows Vista Driver Ricoh 5-in-1 Card Reader of your computer driver page. Alternatively, you can try to use this Ricoh Media Card Reader Driver for Windows XP, Vista and 7. Finally, Windows update may be able to automatically locate a driver for the 'Base system device '.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• ProBook 4431 s: lack of Base system device

  The problem starts after I formatted my Os and switched to windows 8.1.My windows apps store continues to crash and when I troubleshoot it shows device Base system driver missing. Then when I have only checked my Device Manager it shows no driver for basic unit. Please can you hepl me with the driver!

  Hello:

  You need this driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_110565_1#tab1

• Working Mobile HP ZBook 17: lack of Base system device driver

  Upgrade to Windows 10 has disabled the Thunderbolt port that I use for a LaCie external hard drive. I can use a USB3 port, but it is slower.

  Previous questions on the forum, I understand that the following details are required to identify the missing driver - show details of properties for the hardware ID:

  PCI\VEN_8086 & DEV_156A & SUBSYS_11112222 & REV_00
  PCI\VEN_8086 & DEV_156A & SUBSYS_11112222
  PCI\VEN_8086 & DEV_156A & CC_088000
  PCI\VEN_8086 & DEV_156A & CC_0880

  Help please

  Hello:

  According to the hardware ID you have validated, you need this utility...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5428483&swItemId=ob_141251_1&swEnvOid=4192

• Missing Base system device driver

  I bought my Elitebook 8560p a few weeks back off a friend. Wiped the whole laptop and installed a new operating system (Windows 7 Ultimate 32 bit). I thought I installed all the drivers but im told Device Manager still lack a "Base system device" driver Help please?

  Hello

  It is very good

  The driver you need is for the Card Reader JMicron Media which can be downloaded and installed from the following link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5056949 & prodNameId = 5056950 & swEnvOID = 4055 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-93389-1

  Kind regards

  DP - K

• ProLiant DL360 G8: Missing Base system device driver

  Hello

  I have a HP Proliant DL360 G8 with Windows Server 2008 R2 Enterprise SP1 server, but when I go to Device Manager I get lack of base system device driver. Please I need know what driver to install.

  Properties of the device:

  Hardware LDS:

  PCI\VEN_8086 & DEV_0E26 & SUBSYS_18A8103C & REV_04

  PCI\VEN_8086 & DEV_0E26 & SUBSYS_18A8103C

  PCI\VEN_8086 & DEV_0E26 & CC_088000

  PCI\VEN_8086 & DEV_0E26 & CC_0880

  Location information:

  PCI bus 0, device 4, function 4

  Compatible IDs:

  PCI\VEN_8086 & DEV_0E24 & REV_04

  PCI VEN_8086 & DEV_0E24

  PCI VEN_8086 & CC_088000

  PCI VEN_8086 & CC_0880

  PCI\VEN_8086

  PCI\CC_088000

  PCI\CC_0880

  Best regards

  Hi Rubendiazmarino,

  Try these drivers for your server:

  • HP ProLiant iLO 3/4 Management Controller Driver Package for Windows Server 2008/2012 X 64 (U.S., International)
  • HP ProLiant iLO 3/4 Channel Interface Driver for Windows X 64 (U.S., International)
  • Handset identifier Chipset for Windows Server 2008 R2 (American International)

  After installation reboot, your server for these driver to work.

  Yours faithfully,

  Ryan

• HP ALL in ONE Pc 18-1201ix: lack of my pc Base system device driver

  HP All In one 18-1201ix I use window 8.1 missing my pc not complete player Base system device driver please download link give and I'm window change 8.1 to 7 ultimate so please I give me a Base system device driver download win7 or win 8.1 Please

  Hello:

  Have you installed the applicable for W7 32 bit graphics driver?  Otherwise, it's here...

  http://support.AMD.com/en-us/download/desktop?OS=Windows%207%20-%2032

• ProBook 6550 b: driver missing Base system device

  After you have reinstalled Windows 10 on a Probook 6550 b I can't find the correct driver for both devices.

  -Driver missing Base System Device 1:
  Device PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C & REV_01\4 & 1089976f & 0 & 02E2 requires installation.

  -Lack of pilot system of Base 2 device:
  Device PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C & REV_01\4 & 1089976f & 0 & 01E2 requires installation.

  Is it possible to put me in the right direction?
  
  Thank you very much.

  Lennard

  Hello

  Try to install the Windows 7 version of the Ricoh Media Card Reader Driver.

  Kind regards

  DP - K

• 4440S proBook: drivers missing "Base system device" of 4440S

  Hello, I recently made a new installation of Windows 7 Home Premium 64 bit on a Probook 4440 S.

  I went into Device Manager to install the missing drivers. I'm missing two drivers and I was unsuccessful driver update by using the option "Search automatically for updated driver software" on the tab in properties.

  I searched online by using the values of LDS of material on the Details tab, but links in other posts were most valuable. Can someone help me?

  Lack of drivers by using the property of LDS of material on the Details tab

  #1 base system device

  PCI\VEN_197B & DEV_2393 & SUBSYS_17F3103C & REV_30

  #2 base system device

  PCI\VEN_197B & DEV_2392 & SUBSYS_17F3103C & REV_30

  All drivers are displayed on your page, including the JMicron card reader support:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5229487&swLangOid=8&swEnvOid=4058

• Helps to identify the Base system device, please.

  Hi all, I need help identify 2 base system devices lacking drivers.

  Model: T61 7663-CY2

  After a rebuild, I can't find the missing drivers.

  Link to image

  Thanks for any help.

  Hello and welcome,

  It seems that the Ricoh card reader.

  Z.

• HP EliteBook 8540w: "Base system device is not installed driver.

  Hello

  I recently installed Windows 7 Enterprise on my HP Elitebook 8540w, and since then the unit has been a couple of kinks.

  The material under properties pc looks like the picture. It does not install a driver for my printer/scanner, and the headphone jack has not worked since installing Windows 7 Enterprise.

  Thanks in advance.

  

  Hello:

  Please first install the chipset driver and restart:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4096175&prodNameId=4097219&swEnvOID=4060&swLang=13&mode=2&taskId=135&swItem=ob-83120-1

  The base system device is lack of card reader driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4096175&prodNameId=4097219&swEnvOID=4060&swLang=13&mode=2&taskId=135&swItem=ob-79317-1

  See if this driver USB 3.0 solves the problem of USB.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4096175&prodNameId=4097219&swEnvOID=4060&swLang=13&mode=2&taskId=135&swItem=ob-81459-1

  If the unknown device persists after installing the above drivers please do as David has requested and post the hardware ID's for her if we can send you the link for the drivers.

  Paul