Lack of concordance between his computer and sigma-tel
My microphone is not recognized in my sound pop up. When I plug in I can select it in such sigma so I know that's not the card or device, but when I intocontrol pannel of sounds, then saving it is not there to choose. He has worked in the past, this is a new development. I have a Dell Inspiron, Windows XP. Any help would be appreciated!
Hi helphelppls,
Follow the steps in the article.
How to troubleshoot sound problems in Windows XP
http://support.Microsoft.com/kb/307918/en-GB
How to update a sound card driver in Windows Vista and Windows XP
http://support.Microsoft.com/kb/166774
Tags: Windows
Similar Questions
-
Hey I recently had problems with my connection Wireless between my computer and the router.
Normally off during the night is not connected to my router or on the internet the next day.I have been in close contact to my isp provider and have received a new router and reset my wireless Internet services provider site but I'm still having problems. I have also updated my drivers for my wireless on my laptop Hp G62 and have found that it will not cut when I do not shut down or sleep during the night.
When you try to solve the problem, it will come back with "problem with the adapter or wireless access point and then asked to disconnect the power to the router. After doing this it will be fine all day.
I do also to turn a blackberry 9000 "BOLD" and see first thing in the morning if the wireless is connected or not.ask for help, here is my last option I have been through everything and had an expert look at my computer where he found nothing wrong with my computer or wireless set up settings.
any help or advice would be great
Hello
1. do you have problems connecting with Windows 7 or Vista?
2. you remember of any change to your computer before the problem?Make sure that there is no interference between your router and your computer. For example. Mobile phones, like the mobile signals could conflict with your router signals and therefore no connection to your computer.
You can uninstall and reinstall the Device Manager wireless network card.
To uninstall the wireless device manager,
a. Click Start, type device manager in the search box of start and press ENTER.
b. Locate the network adapters and expand the same.
c. Select the wireless connection, right click and choose uninstall.
d. restart the computer, if prompted.
Pilots should settle automatically after the computer restarts.Now you can install the latest wireless drivers and check if this solves the problem.
-
I bought a new computer and want to remove Adobe Photoshop CC between this computer and load it into a new one with Lightroom. How can I go about it?
Hi David,
Please see the link below to uninstall any creative cloud.
Uninstall or remove Adobe Creative Cloud applications Once you uninstall you can install it on the new computer by following the instructions on the link below.
Download and install Adobe Creative Cloud apps
Hope this will solve your problems.
Kind regards
Hervé Khare
-
How to run code and to communicate between the computer and myRIO?
Hello
I am trying to create a colortracker using the myRIO. The system is pan tilt servo with a webcam. The project works well and is able to follow and move with the desired color. However, in order to continue the project, I want to ensure the system with another device for the perception of depth and want to use the host computer for webcam and image processing and the myrio to get signals for the servos. The idea is to connect two webcams directly to the computer usb ports and keep the myRIO connected to everything does time i.e. no wifi. Can anyone guide me as to how I would go about sending signals constantly between the computer host and myRIO?
I advise to use Variables shared Network-Published or network stream.
You can read about them both in the cRIO guide Developer: http://www.ni.com/pdf/products/us/fullcriodevguide.pdf
There are also examples for both in the Finder for example LabVIEW.
-
Connection between the computer and the external hard drive stopped during the backup
The connection between my PC and my external hard drive has been accidentally cut while I perform a backup. Since then I reconnected my external hard drive to my computer and come back again.
Windows continue my back up where it left off, or he adds a new point backup on my external hard drive?
Hi Brandon,.
Thanks for posting your query in Microsoft Community.
I would like to inform you that, if the backup is interrupted and it is asking to start the backup. Then, you will need to perform a new backup.
Reference: back up and restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7
It will be useful.
Let us know the status, we are happy to help you further.
-
No communication between the computer and the printer Photosmart D100 HD series
Pentiun4 computer and HP Photosmart D110 seriesmy problem computer is HP but not accept the printer sends the signal to the printer. Thank you
Hello
1. what operating system is running on your computer?
2. it worked earlier? If so, remember you have changed your computer?
3. What is the exact error you receive?
Follow the steps in this link and check if that helps: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
-
No connection between the computer and the digital camera.
Tried to download from camera to the computer. After I connect my digital camera to the computer using the usb cable, said digital camera looking for a connection. I never get a guess that the cause I can't go any further. What I am doing wrong. I looked in my computer and the camera seems to be there. First, he tries with this camera. I have a HP and HP M305 camera.
You send messages in Forum Vista and you're missing to this effect on the experience of the current users of XP.
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threadsI gave you the original link will show also a lot more updates and drivers for XP also.
Software & Driver Downloads
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=410648To start Devmgmt.msc type device manager in the Start Menu / RUN box. Make sure that the camera is fixed when you look in the Device Manager.
Troubleshoot: Windows won't recognize USB hard drive / fix unassigned drive letter
http://www.TechSpot.com/VB/topic122125.html -
Virus scan problem when programs it then told me I'm not the primary user of the computer and I have to be the computer administrator?
Virus scan problem when programs it then told me I'm not the primary user of the computer and I have to be the computer administrator?
You are the administrator or not? You have the admin password at your disposal? Yes or no, please.
If your answer is 'yes' to any of the above, then go Sfae mode. See if you can run the anti-virus in SafeMode.
How to get in Mode safe?
Restart your computer > immediately and repeatedly tapping the F8 key until you see a black and white screen > top/down arrow and select Safe Mode > login to your account > do the virus scan now.
If you need to use the links, and then select Safe Mode with network just instea Safe Mode.
-
I don't want to charge my laptop I already use Firefox. I need to know how to download on a USB key that I can load and then in the other laptop.
You can download a complete installer from this page (scroll down to his preferred language):
https://www.Mozilla.org/Firefox/all/
I suggest to download hard disk and then copying to the USB flash drive in Windows Explorer (you can click on the folder icon on the right side of the download for the file list to open a window for her). That way Firefox will try to access the flash player in the future as your last used download location.
-
I lost the timing when I tried to make some other changes and now can't get it back. The computer wants the key to recovery of the Tablet, and I do not know how to find it on this device. I tried to uninstall and reinstall firefox Tablet and unsyncing of the computer, then restarting everything. I even created a new account with an alternate email address. Every time, even when I ask the computer to generate a new code and everything looks good, the computer will say that the key is wrong, and I should get from the other device. The 'how' was given instructions that would work since version firefox PC, but I can't find a way into the Android format. Can anyone help? How can I completely reset?... Or find the key on the Tablet?
You can use this extension to get the key of the synchronization of an Android device:
- See the sync key: http://limpet.net/key/
-
No communication between my computer and the CD/DVD drive
Whenever I try to read CD or DVD through my laptop CD, the CD or DVD will not be detected by the computer. The disk drive (Hitachi HTS543232L9A300) is in good condition. What could be the problem and how to fix this problem?
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116Try to run repair before.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problemsI hope I could help
-
I have a PC Compaq Presario CQ5600y and I did the recovery disk set and already used once on this computer. I just ordered http://www.newegg.com/Product/ComboBundleDetails.aspx?ItemList=Combo.2884739 can I use thos 3 drives on the new computer to install windows7?
Any help is appreciated. Thank you!
John
Recovery disks can only retrieve an operating system installed. If there is no OS on this system, you will need to purchase a copy of an online retailer that Microsoft no longer sells it. You may want to consider earning 10 instead of win 7 because it will be supported more than 7
-
If anyone can help with the above problem, I would be very grateful. I was able to install the proper drivers etc for the printer from the internet, but have no idea how configure the feature wireless for Windows 8. He keeps talking about not entered the key name and the correct network security, but where should we register them and how? I tried using the installation CD, but it kept asking me to connect the computer to the printer via the USB cab so that he could get the necessary information. I did it, but he never had a more so I couldn't continue. I guess I should have seen a screen somewhere, where I entered the network name and security key, but no such thing happened. If anyone knows what to do, I would be very grarteful. Thank you!
Download the User Guide and the reference Guide.
http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=5224271&
Read both and follow the instructions exactly to connect your printer.
-
Lack of interface between Apple Photo and items
Hello:
I imported my photos of Apple's Photo to the elements. All the photos are in the elements, but they have question marks at the top
left corner and I get a photo is disconnected message if I try to change.
I talked to Adobe Elements cat and they don't know anything about. (I take it from the search forum that there is no real interface between the two
applications.)
Apple has suggested that I have to copy my photos to a USB file and then import items from there.
Is there a downside to this? Which will look like the file structure in the elements? Should I delete the images currently in the elements before importing?
Thanks for any help you can provide.
Andrea Bardfeld
I have
If I click on the link to the right answer, where it seems that the answer should be, my system is not responding.
-
Problems sending data between the computer and the emulator.
I can't send anything to the Calculator Emulator. Does not appear in the Send button calculator. In the emulator, it seems that send key as soon as I connect with the calculator and can send data to it. There is command of testicles that EU can do to make sure that a machine works, for example, the USB driver?
In fact, including updates, firmware:
application version: 20140702v6031
operating system version: V 0.032.6030
version of the program: 201472 (6031)
most: the calculator, I received yesterday, day 1. and I doesn't seem to work well. There is a channel for guaranteed support, you can contact?
Recognizing
Davi
Friends:
Thank you very much. The problem has been resolved. As soon as I saw the kit, 3 updates were made and the machine works normally.
Thank you
Davi
Maybe you are looking for
-
So, to start, I love everything about the IDEA of my phone. I love the Android operating system and the unique flip keyboard but I had nothing but problems with my phone and it was not yet a year old. Problems with my buttons stopping their duties, m
-
Using the calendar function to select and read data from MS access tables?
Hello I woke up in the learning of database in no time. I'm using Labview 9 to create a table based on DDMMYY hhmmss format. I can write data to the table in access. The picture will be 24 hours before a new table will be created. However, I find tha
-
DV9000 freezes - not to recognize the new second Drive
The laptop in question is a HP Pavilion DV9225us (DV9000) running Windows Vista Ultimate 64 bit (SP 2) with 2 GB of RAM and a chip from AMD Turion 64 x 2 TL-60 2.00 GHz. I took the Samsung existing 120 GB drive in the second and replaced drive bay by
-
I have users who use the offline files feature so that they can work on files of network when the network. After using my credential and working on a user's computer yesterday, copies of my files from home drive now appears in the user drive home.
-
The snap depending on the place still works, it's just the graphics problem. Also, if I don't drag the window, it seems.