Lack of network adapter-Please help HP REFUSED TO

Similar Questions

• EXTREME slowing windows 7 professional 64-bit response time, possibly problem driver network adapter? Help, please!

  I have Windows 7 Professional 64 bit installed on a computer, I built

  Data sheet:
  Processor Intel i5 750 (stock clocked & stock cooler)
  Card mother Gigabyte GA-P55A-UD3P
  G. Skill Rip jaw DDR3 1333 RAM (standard timings)
  Western Digital 640 GB SATA HD
  Card EVGA 8800 GS SC Video
  Creative Sound Blaster Audigy SE sound card
  Powersupply Coairsair 650W
  Samsung SATA DVD writer

  My problem is, after I started and had my computer running for a significant amount of time (30 minutes to an hour), I loose full internet connectivity and the response time for any action I'm trying of the preform is from 30 seconds to 5 minutes.

  This problem occurs almost every time my computer is started for a significant amount of time, and it's extremely annoying.

  First Firefox, Google chrome, or internet Explorer stops receivers internet connectivity (because it is not sailing to any web page) but still related reports.

  (during this time and on my computer don't report any anomaly, IE CPU utilization / ram uses / temperature are amounts all acceptable)

  I usually try to close my browser (s) web, but its reports "not responding" and I cannot close or even end the process or the process tree, so it runs as a process. From there a program or a click I do I try to run either doesn't work or takes 30 seconds to 5 minutes to register if they register at all.

  Programs I all ready have running continue to run, IE Vuze, WindowsMP, Zune software, openoffice. But once that I close them I can't reopen.

  Any program I try to open starts a process in the Task Manager but it not to start a program or actually run, and I can't used to finish the tasks that do not work properly.

  If I try to shut down windows, it takes a minute or so to begin to disconnect, then he sits on the "logging" off the screen until I use the power switch to kill the system.

  I suspect that it may be a problem from my network card driver (Controller Realtek PCIe GBE Family, latest version downloaded directly from the Gigabyte website for my motherboard) because the question almost always starts when my internet stops working. However, this may be 2 combined numbers.

  I had this problem and I thought it was because of an installation of bad windows 7 so I erased the hard drive and did a complete new installation, but the problem is back!

  I changed my routers settings to give me a fixed IP address to dismiss questions here. All the other computers in my House have access the internet without interruption during my problems. And no other computer in my house has similar problems.

  I reinstalled the network once drivers without success.

  I would like to address the downturn extreme Windows 7 after half an hour or so if possible because I have other NICs lying there if the problem comes from the network card.

  I'm pretty computer savvy and I've exhausted all my ideas, so any notice are useful! Thank you

  OK, so I think that the slow issue is resolved now. I blame intel speedstep, while part of my problem is fixed.

  Internet connection problems still remain.

  I ran my computer in safe mode with network for about 2 hours. When I booted in safe mode, everything was fine, internet connetion worked on download and upload at full power. I let it sit for an hour or two in safe mode and I came back and there is no internet again, as usual. All my browsers (internet explorer, my main browser firefox and chrome) refuse to function / load anything and their work will not end in the Task Manager. The device says it all works and it (network adapter) said I have a connection, but I am squatting me on my browsers or any other uses of the Internet. This test will run on a network interface card that I installed, with drivers. I did him wrong with shooting my motherboard cable network and its software driver port. This new card gives the same result, so I think now I know that this issue has nothing to do with my physical port or its drivers.

  The only things I can think that it either now are either:
  my router
  However, all the other computers in my house (3 of them, 1 win XP), 1 Win 7 64 bit pro, 1 Ubuntu and my Xbox 360 not having this problem and works perfectly

  or

  Something inside windows 7 that control the browsers or manages connections,
  I think it's most likely due to the fact that my browsers have problems in the Task Manager / they do not work properly

  All reviews are useful,

  Thank you!

• VMware Server VM - network adapter disconnected - help needed please

  Hello world!

  I already install VMware Server running two virtual machines in test environments. Virtual computers running Windows XP Professional (Service Pack 2). VMware server itself is sitting on Windows Server 2003, which I have remote access.

  The plan is to let the virtual machines running continuously and access them directly on a Remote Desktop Protocol. It was working fine until we had an incident with Windows Server 2003.

  The incident was that we decided to upgrade to Service Pack 2 on the server. When we restarted the server, we found that the IP Configs were changed. NIC 1 didn't have any parameters calibrated but NIC 2 made. We removed NIC 1 and then reconfigured to run 2 NIC NIC 1.

  The server now works fine and we can remotely access, but the virtual machines have lost their configurations. When I run it says that the network adapter is disconnected. I kept them and adding new hardware, selected network adapter and connect at startup. But whenever I run a virtual machine, it says that the network adapter is disconnected.

  Anyone know how to fix this? any help would be greatly appreciated.

  Thank you

  Phill

  The guest system control panel-> Add/Remove Programs (uninstall tools and install new web access panel)

  Check the ipconfig/all command on your comments (start-> Run-> cmd)

  Post edited by: janlib

• Websense p2V (network considerations) - Please help!

  Hi guys

  We will virtualize our websense server, I did some research, but so far I'm not 100% sure how could I go about this.

  I made a drawing (not very good) to have a look for you guys. It is the PHYSICAL configuration.

  -- ---

  -

  ---

  I want to you to guide me to the virtual installation.

  As you know in the virtual world, we will have two network adapters on server websense (as shown in the photo) - attributed to a Vswitch which in turn will have an allocated physical NIC

  -

  ---

  (What NIC would be drawing),

  Also in the virtual world (we have two switches HPprocurve) on which we have our networks LAN, Iscsi and Vmotion defined.

  I'll have to put my network directly interfaces for the cisco routers (directly connect the ESX)

  or wil have to unplug these interfaces from websense servers and connect the HP ProCurve (used for the virtual world)

  ??? My concern is, the configuration of the monitor (source and destination port) on the cisco switch. (to which our websense is directly connected)

  -

  ---

  so, if I virtualize, I'll have two layers added between (1. Vswitch) & 2. HP procurve switches.

  I hope this makes sense, if not ask me and I will try to explain

  BUT please help me, because I'm stuck. I don't know there are people who have done this before.

  Please, your expertise is needed.

  Concerning

  Rucky

  Hello

  Examine your vSwitch + VM in effect replace your Websense server in order to have links with cisco switches. You would the Cisco through the HP ProCurve trunk for your vSwitch Portgroup on this virtual machine.

  Don't forget that your VM should not be able to see your Console of Service networks, management tools, storage VMOtion or IP.

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• My ipad cann't detect any wifi network. Please help me

  My Ipad cann't detect any wi - fi network. I rest a network setting, press power and home button and reboot several times. But can't detect any wifi network. Please suggest what I can do.

  Take a look at this Apple Support article:

  https://support.Apple.com/en-us/HT204051

  Reset your network settings.

  Settings - general - reset - reset the network settings

  Reset your device. This will not erase your data stored on the phone.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• Lack of network adapter ISATAP, no internet connection

  Using an Advent laptop on version 6.0 service pack 2 for Windows Vista Home premium. 32-bit operating system

  I don't have the ability to connect to the internet (no wireless or cable)

  At startup, the following messages are present see the:

  1: Windows needs to install driver software for your unknown device (but as there is no internet connection I can't do that)

  2: btnda.exe WSAStartup() failed or if you have the wrong version of the installed WinSock

  When there are 2 triangles of yellow exclamation point in Device Manager,

  1: - network adapters - isatap, {5EDEBEBF-0129-4577-AE4F-3DA330B44453}

  In the properties "this device does not work properly because Windows cannot load the drivers required for this device. (code 32) »

  2:-devices-device other, unknown

  In properties of this device is not configured correctly (Code 1)

  Something that may be equally important is the laptop has rarely been used or have access to the internet for about a year, so recently executed a lot of updates.  She started well a few times and now unable to connect to the internet more.

  I tried to do the system restore, but him available restore point only earlier today so was not helping.

  I thank very you much for your help, if I missed any important detail it please just ask for them and I'll try to add them as soon as POSSIBLE.

  Hello

  Read this, you can:

  "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

  http://support.Microsoft.com/kb/932520/en-us

  Windows cannot load driver (Code 31), etc.

  RESOLUTION

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  ____________________________________________

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update and that you can not do) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  ___________________________________________

  If uninstalling the update does not solve it:

  Use the computer that you use to get here for access to the site on your computer or hardware manufacturer > downloads Section > key in your model number and operating system > find NIC drivers > download and save > use copy to a flash drive and transfer and install them.u here to access the site on your computer or hardware manufacturer > downloads Section > key in your model number and operating system > find drivers NETWORK card > download and save them > copy to the flash drive and transfer and install them.

  See you soon.

• (Win7 64 bit PC HP2000) Network problems, please help!

  Here's the problem:

  On the taskbar, it has a X on connect it to the thing, as if I turned off my WiFi.
  When I click on that, on the top it says "connections are available.
  and on the list of networks, on one I'm signed in, it says "* name *-connected network.
  In the network and sharing Center, it says that I am not connected to any network
  I'm sure that this a driver problem, but I can't find where to put up-to-date.
  In Device Manager, it's the 3 drivers I have under network adapters
  Microsoft Virtual WiFi Miniport adapt
  RALink RT5390 802.11b/g/n wireless Adapeter
  Realtek PCIe FE Family Controller
  I also can not connect my Xbox Bluetooth headset, it just does not appear on add a device when I it BT Mode and press the button connect for 2 seconds. If you could tell me all this, it would be nice :)
  Help, please!

  You get the drivers from HP support, specific to your model

• E HP6830 all-in-one: with disabilities... network configurations please help

  I'm having the same problem.  Just Bough this printer 2 weeks ago staples.  Everything I select, wifi, network, fax even scanning e-mail I receive a message indicating "built in the configuration of the network have been disable contact administrator or the person who created the printer.»

  Help, please.

  Hi @Babyd1967,

  Welcome to the Forums of HP Support! I understand that you can not access anything whether it's on the screen of the printer without administrator rights. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I can send you the reset of the printer in a private message. This should take care of this problem.
  In the forum next to your handle name simply click on the envelope to see.

  Please let me know the results and if there is anything else I can help you. Thank you.

• unknown device "icamera" appears in the list of devices in network in my own home network-URGENT please help me

  under network devices I see "icamera.  I have never connected an icamera to my computer or any computer.  When I right click on it there are only a few details under properties. I look to the top of mac and the unique identification number and its meout freaking cause he says Sercomm Corp. making home surveillance network cameras.  I'm wondeering if a hidden camera could be in my house somewhere.  trying to pair with him ask an ID unique which I did not, but only to play with it, I know it is a 4 digit code.  I can't connect to it and its scaring me...  I can't delete or remove from the list.  Ive had the same provider and specific to the home network for 2 years.  My husband is a genius with computers (for me), it can build computers.  IM thinking there is something hes doing and wont tell me...  HELP PLEASE

  I had the same problem... but what I found is... I have ADT Pulse that came with a camera... and wireless sound while remaining connected to a router that is on my network.  He never use to see one, but all of a sudden, he is now listed in my network neighborhood.  Maybe an update of came thru that now allows it.  But that's what it is... so if you have some sort of security at home with a camera... It's probably that your Detection.

• Lack of layers palette - please help

  Can someone help me please figure out how to get my layers back panel - I tried to reset the workspace, quit the program, I even deleted and redownloaded Illustrator CC but the palette has disappeared.  There is a check mark next to "Layers" but no layers palette.

  Thanks for any help!

  AVA,

  Try the list (5) is not relevant here).

  The following is a general list of things you can try when the question is not in a specific file (you tried/made some of them already). 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible);

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) uninstall, run the vacuum cleaner tool (if you have CS3/CS4/CS5/CS6/CC), and then reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Technically challenged - need network drivers - please help

  Pavilion a6110.sc - basic vista.

  I did a hard "cloth" drive and wiped my computer. I installed XP, but miss me the drivers of network cards to connect to broadband - I can not connect online in order to get the necessary drivers. I have been using another computer to try to download the drivers to install in my Pavilion, but I can not:

  1. find the right drivers

  2. transfer download drivers via USB, or other methods

  How can I get the drivers for my Pavilion xp without being online?

  HP Pavilion a6110.sc desktop PC > product information
  Features motherboard M2N68-(Narra2)

  http://support.HP.com/us-en/document/c01080282

  NVIDIA GeForce 6150SE nForce 430 chipset
  OnBoard LAN PCI Realtek RTL8201N 10/100 Mbps LAN PHY

  =========
  http://www.Realtek.com/FAQs/faqsView.aspx?langid=3&PFID=1&level=3

  Q9: Why can't find RTL8201x driver from the Web site?
  A9:
  RTL8201, RTL8201BL, RTL8201CL, RTL8201CP, RTL8201N and RTL8211B (L) are all PHYceiver. It is a hardware device without driver. Driver software are compared to the network (MAC) controller that is built into the chipset in this case for the most part. Contact your motherboard manufacturer or the manufacturer of the chipset to get good support driver.

  =========
  % NVENETFD. DeviceDesc % is NVENET61_VISTA. NDI, PCI\VEN_10DE & DEV_03EF & SUBSYS_2A62103C; Narra2

  =========
  NVIDIA Ethernet driver

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=VC-76935-1&swEnvOID=1093&swLang=13&TaskID=135&mode=4&IDX=0

  Type: Driver - network
  Version: 73.1.0 Rev C (12 November 2009)
  System: Microsoft Windows XP Professional
  File name: sp45423.exe (35 MB)

  [Devices]
  VEN_10DE & DEV_03EF = LAN NVIDIA

  [Standard]
  nvnetbus %. DeviceDesc % = nvnetBus_Device, PCI\VEN_10DE & DEV_0269
  nvnetbus %. DeviceDesc % = nvnetBus_Device, PCI\VEN_10DE & DEV_0268
  nvnetbus %. DeviceDesc % = nvnetBus_Device, PCI\VEN_10DE & DEV_03EF
  nvnetbus %. DeviceDesc % = nvnetBus_Device, PCI\VEN_10DE & DEV_03EE
  nvnetbus %. DeviceDesc % = nvnetBus_Device, PCI\VEN_10DE & DEV_07DC
  nvnetbus %. DeviceDesc % = nvnetBus_Device, PCI\VEN_10DE & DEV_0760
  nvnetbus %. DeviceDesc % = nvnetBus_Device, PCI\VEN_10DE & DEV_0AB0

• Sharing of network problems please HELP!

  Hello

  I'm trying to put a server, I have problems setting up network shares. I am 2 users, Carlos (admin) and the family. Carlos has access to the C, D, E, G and H. But the family has access to the public folders.

  I was able to share with the family, with success, public folders, but for some reason, C, D, E, G and H also highlighted when I connect with the family user account, and when I click on one of them says "access denied", but when I connect with Carlos, C, D, E, etc. work great. I'm doing something wrong? I want to just public folders appears when I connect with the family, not the HARD drive account.

  Thank you

  Hi Carlos,

  Thanks for posting your query in Microsoft Community Forum.

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information is useful.

  Thank you

• Im trying to download i tunes and I get the error: could not access network location - please help

  Log name: System
  Source: Service Control Manager
  Date: 06/03/2012 10:48:07
  Event ID: 7036
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: ARJDLV5Q74
  Description:
  The virtual disk service entered the stopped state.
  The event XML:
  
   
     
      7036
      0
      4
      0
      0
      0 x 8080000000000000
     
      39271
     
     
      System
      ARJDLV5Q74
     
   
   
      Virtual disk
      order
      7600640073002F0031000000
   
  
  Log name: System
  Source: Service Control Manager
  Date: 06/03/2012 10:48:07
  Event ID: 7036
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: ARJDLV5Q74
  Description:
  The virtual disk service entered the stopped state.
  The event XML:
  
   
     
      7036
      0
      4
      0
      0
      0 x 8080000000000000
     
      39271
     
     
      System
      ARJDLV5Q74
     
   
   
      Virtual disk
      order
      7600640073002F0031000000
   
  

  Hello

  When you get this error message - during the download or installation?

  Method 1: Download the latest version of Java and see if that helps.

  Download and then install: http://java.com/en/download/index.jsp

  Method 2: Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall 

  Method 3: How to solve problems when you install or uninstall programs on a windows http://support.microsoft.com/kb/2438651

• network adapter missing e9150t

  My system works fine this morning - but then the network stop job.  This system is connected through a router to the ethernet adapter in the PC.  I have a second PC connected wireless through the router and it works fine.

  On the PC with the problem, Diagnostics in WIndows 7 said that it lacked the network adapter. When I looked in the device driver - the network adapter is missing. I called Norton to see if a virus has caused the problem, but they said they didn't know any problems. I tried restoring the system and supported the system a few days ago, when the system has worked very well - same problem.  I searched on the HP support site - but don't see no driver to download to restore the network card which must have become invalid or corrupted somehow.  Anyone any ideas how to fix this problem?

  Hello:

  I don't know if this will work, but here are the network drivers you need for your PC. You should see the controller ethernet with an exclamation indicating it is present, but there is a driver problem.

  Select the 32 or 64-bit download as applicable to your system.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18713&lang=eng&OSVersion=Windows%207 * & DownloadType = drivers

  If you do not see the device at all... Although opens a whole new can of worms. It could be that the network adapter to the top and dies on you.

  In this case, you will have to go to plan B and buy an external USB RJ45 network adapter or internal network PCIe x 1 adapter.

  Paul

• HP Mini 110-3700: network adapter for HP Mini 110-3700 is missing

  I've updated my netbook to windows 7 and now I have no network card please help me guysss to solve this problem.

  Network adapters: PCI\VEN_10EC & DEV_8136 & SUBSYS_1584103C & REV_05

  Network controller: PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01

  Video controller: PCI VEN_8086 & DEV_A012 & SUBSYS_1584103C & REV_02

  This is the only 3 drivers have yellow mark... Please help me...

  Hello!

  Install:

  Realtek PCIe FE Family Controller

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52723.exe

  Broadcom (WiFi)

  http://ftp.HP.com/pub/SoftPaq/sp51501-52000/sp51605.exe

  Intel(r) Graphics Media Accelerator 3150

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52565.exe