Lack of ZTE A2109 Wifi sleep policy

Similar Questions

• ZTE A2109 WiFi authentication with Devolo dLAN 500 WiFi problem

  Someone has the same problems, I can't get a solution for this! My ZTE has therefore no connection to the Internet!

  Thank you and yes there is some confusion between the password and key wifi!

• WiFi sleeps in LockScreen

  I thought that the wifi is always enabled when activated? Is there a setting that I need to activate to prevent disabling when my phone goes to sleep and the screen is automatically locked wifi? I can't find any installation for her

  I need some app when my phone is locked and I use the wifi and my messages are urgent

  Thank you

  Plug it.

• Lack of network (LAN/Wifi) on G6 series notebook drivers

  Hello world

  I have a g6-2248 Pavilion laptop and I'm not able to install the right network drivers.  The laptop was initially provided with Windows 8, but I installed Windows 7 Pro 64-bit and it is at this time that drivers stopped working.

  When I go into Device Manager, and then search for the drivers he finds nothing.

  I would appreciate any feedback and help!

  Let me know if you need more information.

  Hello:

  This should be the latest W7 driver for Ralink RT3290 wireless adapter in your PC.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-111782-1&mode=4&IDX=1

  Paul

• Update on ZTE A2109

  
  

  @erkryns - Yes, ES File Explorer should be able to see the external sd card.  The record for what it is/storage/sdcard1.  In older versions of, you could get for her favorites.  In the latest versions (with the new look interface), you can expand 'Local' on the left and press sdcard1 for quick access.

  @SE-Soha, he said right in his message that he is running 4.1.1.

• HP Pavilion G6 2320 tx: lack of network (LAN/Wifi) on the HP Pavilion G6 laptop drivers

  Hi all

  I have a Pavilion laptop 2320tx g6 (Indian model) and I'm not able to find the right network drivers.  The laptop was initially provided with Windows 8, but I installed Windows 7 Home premium 64-bit and it is at this time that drivers stopped working.

  When I go into Device Manager, and then search for the drivers he finds nothing.

  This is the link to my laptop model page.

  http://support.HP.com/in-en/product/HP-Pavilion-G6-2300-notebook-PC-series/5330578/model/5354728/doc...

  My device ID MATERIAL are-

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C

  PCI\VEN_1814 & DEV_3290 & CC_028000

  PCI\VEN_1814 & DEV_3290 & CC_0280

  I would appreciate any feedback and help!

  I found a few links on the messages earlier, but they are broken and does not.

  Let me know if you need further clarification. Please help as soon as possible. :-(

  Try:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58586.exe

• LaserJet P1102w - lack of printing problems and sleep-wake duplex in ML

  I have my printer installed via AirPrint, the latest firmware and all that.

  However, the attempt of Apple to a driver treats this as a very basic printer, and I can no longer print double-sided. There also problems waking up to print if it has not been used for some time. I have to turn on the printer, cancel jobs, place them again and hope it works. Sometimes it takes two or three attempts.

  When will they be available for Cougar your real drivers? I want that my printer to work as if it was in SL and Lion.

  Chris

  No, this isn't

  When I run the setup I get to step 'Select device' and the printer does not appear. I connected it via USB for it and still nothing. I removed the printing device configured to AirPrint and the same thing. I installed it using the generic 'PCL' profile via the port USB, and the installation program still shows nothing.

  However... I returned to the page produced and found another download

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-80684-8&cc=us&DLC=en&LC=en&OS=219&product=4110396&sw_lang=

  It is for 10.4 to 10.7, but I gave it a shot. Updated the firmware on my printer (again). Now I can add the printer as "HP LaserJet Professional P1100w, 5.0", and the duplex option is enabled and works!

  If this page needs updating to include bones x 10.8. I don't know why it says version 8.0 when the control panel no longer reports as 5.0. Whatever, I print double-sided once again.  I'm a happy camper

  Chris

  PS I am that mark it as resolved because it was in a roundabout way, but not with the link you provided.

• Screen lock switch off wifi until this that unlocked?

  Recently, I noticed that my Bionic seems to disconnect WiFi when the screen freezes. When I unlock the screen (and I have the motive to peas unlock), there is no icon wifi for a few seconds.

  I have unlimited data, but still keep my DB on wifi all the time at home and the office. I guess that DB going in 3G or 4G mode when it is locked, which could be problematic if I had a plan of measured data. Anyone else notice this behavior?

  I noticed this also, in my view, there may be a setting for this property.

  Settings > & wireless > Wi - Fi settings

  Press the menu button, click on "Advanced".

  > Wi - Fi sleep policy

  > When the screen turns off

  > Never while it is plugged

  > Never

  Although I set it to never, and he constantly turns off Wi - Fi anyway. This could be another parameter, although I doubt it has much to do with power on/off Wi - Fi.

  Settings > Data Manager & battery > battery Mode

  Customize it to your liking, you can set your quiet hours, i.e. the hours that you are more likely not to use any data. This tells your phone to enable the data off after x minutes of being asleep. You can also set your hours peak, where you will probably use data, but for some cases that you will be gone for a while and it will turn off usually given after a longer period of time than off-peak hours. But I think it doesn't affect the Mobile data (3G / 4G) and will not affect the Wifi.

  I hope that I have provided at least an idea!

• Airport Express does not extend WiFi range

  OK, I posted a long time will cost about an airport older Gen Express not extending my wifi range when implemented to extend (wireless) and connected to a network of Apple (Airport Extreme). No solution, so I gave up.

  Still frustrated by the lack of a strong wifi signal to my back door / Garden (it is a small house!), I bought a new Express and set it up again to extend my current network, placed it on my window sill back room (where I get a pretty good wifi signal on my iPhone and iPad), but about 6 feet of him, the other side of the glass in my garden I get a flicker of 1-2 bars the signal strength that is de-energized intermittently.

  I get no significant (or even vaguely reasonable) increase in force wifi when I approach from the Express, but increase next to the extreme.

  Or should I put either the express until properly (I'm sure I'm) or I am fundamentally misunderstand the term "extend a wireless network. Alternatively, I bought 3 years 2 defective Express apart.

  Can anyone help?

  See you soon.

  You have a handy Mac laptop? If so, we can run tests to understand the current quality of the signal at each location where you want to have a Wi - Fi access. If all goes well, we can find better place to place your Express extension for your goals of networking.

• WiFi closes

  The awakening from the sleep, the wifi closes. WiFi also stops in the middle of the download. solution seems to turn wifi and turn it back on.

  This should fix it:

  http://osxdaily.com/2014/04/24/fix-Mac-disconnect-WiFi-sleep/

• Stay connected mode 'sleep'

  is there an option to stay connected to the wifi mode 'sleep'?

  Not in OS X. You can search for a third-party utility to help you, but I don't remember any. A WiFi sleeps in order to preserve the battery life because the WiFi consumes a lot of battery if left running when not used.

• problems of gps and wifi iPhone 6 9.2

  My iphone 6 does not connect to the wifi unless it is less than 5 feet from the router and the GPS can't find my spot.  This has happened since Apple updated the software around the release of the 6s.

  None of the versions subsequent correction of the problem, nor has any troubleshooting discussed in online forums, proposed by technicians apple or carried out by technicians from apple to the store.

  My phone is a few months after its warranty (how convenient for apple) and they would not replace it without paying me $ 280 to do.

  I am a few months since my full upgrade with Verizon, but the lack of GPS and wifi not connecting not caused much frustration and data usage, which was costing money because it does not connect to wifi when the fact of other devices in my apartment.

  This is one of the worst customer experiences I've had with apple.  I'm on the edge of Verizon plan, which allows me to update when I want if I don't care keep my phone or get money to trade it.  I'm two months from own the phone outright, but I will probably go to a Samsung better buy a promotion gift card $ 150 to go to Samsung and trade in my iPhone.  I'm an advocate of Apple for a long time, but clearly widespread lack of solution to this problem is not a good look for a company that built themselves on the convenience and simplicity.

  After two months of headaches, I feel like it's worth to wait until March and I should not have to this fact.

  You have a question or you did he yell?

• Turning off on its own sleep time IdeaPad N586 wireless card

  This past weekend here when I left my sit computer without using it, he falls asleep on his own as it is supposed to, but when I put my computer from sleep and reconnect, I know that my wireless card is cut and takes like 30 seconds - 1 minute before to activate it again, I did check the fn + f5 and it showed as wireless card being the even if the wireless network connection showed It is not connected, how do I fix this and recently, I make sure that the wireless connection off automatically to save energy

  Follow this thread here: http://www.sevenforums.com/network-sharing/318973-wifi-sleep.html

• After the upgrade to windows 8 wifi is not working.my laptop is pavilion dv6-7039tx

  I tried both drivers windows 7 & 8 but there not work.after restart wifi does not work or when he went to sleep, and after the release of the wifi sleep does not switch on.i installed hp wireless button service also, you see one plane mode we / off.so no use with that.so please update the proper drivers from broadcom combo adapter(wifi+bluetooth).

  Hello guys...!

  My problem was solved.i installed windows 8 pro with release date in December (after 29 Feb).

  in this last victory published 8 pro they made some bug fixes.

  My quality of the camera has also been increased.

  so, try installing the latest os from win8 release date.

  Furthermore, I have not installed the hp drivers, microsoft drivers work well for wlan, bluetooth, camera.

  Try this and enjoy guys...

• Iconia 10 b3 - A20 waking after the deep sleep without rebooting

  I answered a few questions so now I'm going to ask to my .

  I had a problem with my B3 - A20 Iconia Tablet since I got it: it won't wake up if he has been asleep for more than a few minutes, unless I have hold down the power button and it reboot.

  Here's what I've tried so far:

  -A factory reset

  -Installation of all Liveupdates of Acer.

  -Run the Nova launcher instead of Acer home (this was done to get rid of that screen with the left hand, but I thought I would mention it)

  -EZ toggling reactivation

  -Toggling Acer Liveupdate

  -Configuration wifi sleep mode to "always." (This suggestion was made for the same problem in android 3.1, I understood what the heck)

  If someone has had this problem, and is there a solution? I'm pretty tech savvy (I build PCs as a hobby!), and I'm happy to install firmware etc if necessary.

  Eh, I still did and solved my problem: /. I'll save it here so that others have the solution.

  After some intensive research (i.e. googling stuff), I discovered that refusing to wake can be caused by an application hangs the system to wake up. After reviewing the various applications, I found that it was google cloud print and the Acer Smartcoverapp causing difficulties. Because I do not want to use Cloud print (applications published by the printer manufacturers are fast and efficient), and I do not have a smart cover, I have disabled both and now he wakes up instantly to sleep.

  Here's how to disable an application:

  -Go to settings, then choose "apps".

  -Slide the screen on the side until you reach the tab 'All' scroll down to find the app you want to disable.

  -Press on the name of the application

  -This will bring up a screen with two large buttons to the top: "force stop" and "disable". Depending on the application, there may be a third which reads "uninstall upgrades". If the 'disable' button is grayed out, it is a system application and cannot be deleted.

  -Click 'disable '. Depending on the application, you may be asked if you want to uninstall updates. Click Yes.

  -Fact!

  How to activate an application:

  Just in case you disabled something and then have need in the future, you can reactivate again:

  -Go to settings, then choose "apps".

  -Slide the screen on the side until you reach the ' disabled tab scroll down to find the app you want to activate.

  -Press on the name of the application.

  -This will bring up a screen with a button that says 'enable '. Click on it.

  -Fact! But don't forget to update the application to the latest version! If you do not have faffed all your settings, this happens automatically. Otherwise, go to the reading of Google, click on the three lines at the top of the home screen and choose 'my applications' - you can update the things from there.

  Hope this article is useful.