LaserJet P1102w - lack of printing problems and sleep-wake duplex in ML

Similar Questions

• How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do?

  How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do now?

  Looks like a hardware problem (with your home button).  You should probably make an appointment with the genius of Apple on an Apple store near you.  This link can help:

  https://www.Apple.com/support/contact/ >

• LaserJet P1102w: Router reboot printer wireless problem cures - why?

  Ive had this printer (P1102w LaserJet) for a year now. Sometimes its been very well, other times as recently happened constantly offline. Its driving me crazy.

  I just read online that can help to restart the router and the last two times, my printer went offline, restart the router has healed (power cycling of the printer, by running a utility that stops & starts the spooler - did any of these things).

  So my question is - why reboot the router to fix this? Both times I was surfing online with this same router, and I have not noticed any problem with this router. And secondly, is there a setting that I can change into my router so that it will not goof the printer wireless?

  
  HP LaserJet p1102w

  OK, I'm about ideas.  I suggest check the firmware, there is a version 20150114 which was released end of March 2015 available here.

  It can also help to go through all the steps described in the paper here.

  If none of these solves the problem I will ask one of the HP support officers rush in this thread, they may have some additional suggestions.

• LaserJet P1102w: Double-sided printing will not turn off

  Even if double-sided printing is NOT selected in the printer properties, printing all ask for double-sided printing.  So if I go to print a single page printjob, the computer asks to have the blank page that was 'printed' just to get back in the tray.

  How can I get this fixed?

  Hi @Skunkeeper,

  Welcome to the HP Support forum.

  I understand that you use a HP LaserJet Pro P1102w printer with a Windows 10 computer and when you try to print a single page, the printer ejects a blank page and ten invites you to put in the tray, so the second side can be printed, even if double-sided printing is not selected. I would like to help with that.

  This really looks like a software problem. I would like to start by running this HP print and Scan Doctor. It is a tool that allows you to diagnose and solve the problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP LaserJet P1102w: Help with printer install

  HP LaserJet P1102w chip installed on the new windows 7 PC as a USB device when I am logged in it.   How do I make a printer so I can set as the default printer?  On the control panel / devices and printers, she appears as a device, not a printer.

  Solved the problem.  Re-directed HP smart install and the drivers have been loaded.

• LaserJet P1102w: two side printing on Laserjet P1102w

  Hello

  I can't print on both sides for Laserjet P1102w with my Mac, I followed all instruction on HP user manual on page 23, on the '7' clause, I have to click on continue, but it is not a "continuous" option at the request of the printer or the product. And after printing half a million pages, the application works. Please help me.
  Thank you

  Hello

  Once the 1st page printed and reloaded in the status bar, open and close the top page cartridge access door to resume printing and print the 2nd side.

  Shlomi

• LaserJet 400 M401n local printer problem

  I work for a company with remote office environment.

  We have just recently swtched to a new model of small laser printer for the use of the local printer, and I have problems with the first we set up. The LaserJet M401n first was the installation of one of our field technicians program. They connected the device via USB for users HP Elitebook 2540p on docking station and installed the printer using the software from the cd provided and it worked fine.

  End user required to move the printer away from the office, so the USB and power supply were disconnected from the printer and it has been moved and reconnected. After that, the computer showed that the printer is offline. Option of printing of the disabled user, but every time jobs have been sent to the queue, offline they errored quickly.

  I worked with the user remotely and deleted the printer in printers and faxes and print driver from the options in the server properties in this window. I had the user re - connect the printer, but it was not to recognize that something has been connected.

  I went into Device Manager, but I don't see any options to print USB media or DOT4 print media (which is usually the virtual USB port.) There were several devices named "USB Composite Device" and a device called a "USB Mass Storage Device". There are no data storage devices or memory cards connected to the laptop. After removing everyone from the Device Manager, I had the user he disconnect/reconnect the USB from the printer. At this point, the printer has been recognized as connected and adding hardware wizad came. At the same time, a HP Installer utility began. I checked in my computer and there is a removable storage device that provided this installer. It seems that this printer can be a memory chip that contains the software and drivers required.

  I used the HP Installer and installed all the software and drivers, and the printer started working again.

  A week or two later, the user has contacted me and the Office has had some changes made, then the printer must have been dissconnected and resumed contact with a long USB cable. The same problem resurfaced. The printer is connected and even shows like ready. Jobs fail when submitted, and reconnect the cables or rebooting doesn't fix it.

  At this point, I wiped out all the HP report printer software and drivers, removed something that looke HP printer partner since the Device Manager, unplugged the printer and restarted the computer. I connected the printer after the restart and inserted the CD that came with the printer. I used Device Manager to install the printer driver and the print media files on the CD USB (I had to close the HP Installation Wizard about 10 times more it kept popping up). At this stage that the printer has been installed and operational, but when logged in with admin account, the printer should always be prompted for the HP installation software that seems to be running from a USB device stored inside the printer. Which is not "very important, but when I looked at the same way of dissconnected and reconnect the USB cable from the docking station, the printer has stopped printing again.

  The laptop is a HP 2540p with a docking station. He seems to have the same problems when we use one of the USB ports on the docking station or the laptop itself.

  In our company, we run a range of McAfee as VSE, MEE, MEE/PBA, DLP products.

  I will try to upgrade the firmware of the printer and the laptop BIOS. I also asked for one of this model of printers be ordered for our test lab see if we can reproduce the problem on other machines

  Ideas or recommendations would be appreciated.

  bigbankitguy,

  You mentioned that the printer is connected via USB, is that still OK? I want to try the following:

  1. disable Smart Install via the control panel. (Small icon tool and equipment) Configuration menu > Services > scroll Smart Install > DESACT

  Restart your computer and see if that solves your problem. If you continue to have problems, try the following:

  2. go into your task manager > Services tab > click on the button in the lower right of Services > locate HP DS Service > set to automatic; If stopped and then start the service.

  Restart the computer.

• HP Laserjet 1022N continues to printing problem

  My laserjet 1022N of printer on the network is behaving very badly. I print a page, and printing contiues and continues. Installed operating system is WINDOWS 7 Service Pack 1. I have installed the latest drivers but it still the same problem. What is the solution for this problem.

  Forward to close this issue.

  Thank you best regards &,.

  Shiju

  Under devices and printers , right-click with your mouse on your 1022N printer and select printer properties.

  Select the Ports and remove the check mark from the enable bidirectional support.

• LaserJet P1102w: unable to print on both sides manually

  I'm trying to print a PDF in Acrobat reader to P1102w printer file on both sides manually. but it's only the same prints pages and errors when's the time to print the odd pages. The dialog box that tells you to continue to print after that reload the printed paper will appear. What should do?

  Hello

  When she finished the first side reload pages print, and open and close the top page cartridge access door and the print job must continue...

  Please let me know if this can help,

  Shlomi

• I have windows vista and I'm trying to uninstall the hewett Packard software of the printer I bought a printer problem and it does not work because the HP keeps popping up

  Who can relate to Windows

  I bought a Hewett Packard printer and it did not work properly so I bact to the store and exchange it for a printer problem.

  but before he took back the HP printer I do not uninstall the HP with the HP CD software. After installing the software problem I now the HP conflicking with the software of brothers. then when I want to print something the printer HP appears. My question is I tried to uninstall the program from HP and it does not work. I call the Hewett Parkard Tech. and no help there either. So please give me a direction step by step on how to uninstall the software Hewett Parkrad.

  Leon

  See if it helps:

  Three ways to uninstall and reinstall the software of printer/Scanner Hewlett - Packard
  http://www.out-of-warranty.com/three-ways-to-uninstall-and-reinstall-HP/

• Re: Officejet 6500 has more - printer goes to sleep, wakes.

  Hello

  Location: HP Officejet6500A more - new iMac 27 "with Mac OS X 10.7 (Lion) - new driver installed OK HP - printer is connected via USB and I turned off the power on the printer wireless.

  After that full power on the work of the printer scans well, work, fax work - but what printer goes to sleep "indicated by the power LED flashes slow" I can't wake him again when sending a new print job - I need to do a full power off/on power by removing the power cable.

  When the printer is "asleep" utility printer HP cannot connect until I do a power full printer deactivation / activation.

  While the printer is in standby, pressing the flashing slow power switch / light has no effect to wake up the printer, only a full power/turn off works.

  I could not find info on the led slow blinking power manual?

  Any thoughts?

  Thank you

  Tony

  Hello

  Thanks for the post.  With this one, I recommend following the steps listed in the link below.  Make sure you are plugged directly into a wall outlet, not a power strip or conditioner.  Good luck!

  http://support.HP.com/us-en/document/c01321436

• HP LaserJet M4345 MFP: Network printer problem: cannot print, but can ping

  Good evening

  I have a big problem. We have a network HP LaserJet M4345 MFP printer. It is connected to a switch and the switch is connected to a Modem of Telmex.  It has a static IP address. 5 computers to connect to this printer, but I'm going to use one as a sample.

  The problem is that I can't print anything.

  • I can install the printer in all computers
  • I ping the printer
  • I can access the printer configuration using a browser
  • I can even scan a document

  But I can still print the test page. We have a static IP and it does not repeat the IP address, the host name is unique and date everything is fine. I tried to ping to test for the default gateway and it a ping with a correct response time.  So:

  • The configuration of the printer can be accesed via browser
  • The computer can ping the printer
  • I can scan a document to the PC
  • The printer installs very quickly in all machines
  • The printer can ping the default gateway
  • The IP address and the host name are unique

  What could be the problem? I tried to print in all the machines without success.

  Thank you for your attention.

  It is possible that the network adapter has a problem but since it's your only work around would be to buy a direct jet EIO card and put in the EIO slot in the back near where the network cable is plugged.  They are fairly cheap on ebay and you want to buy a 610N, 615N or 620N one of these models will work.  You must assign an ip address that is different from the one assigned to the integrated card.  I think that there is a way to disable the built in network card, but I have to carry out additional research on that.  If you have an old hp printer that you do not use with a network card eio, even if older 600N it will work in this printer.

• LaserJet P2055d: LaserJet P2055d two-sided printing problems

  I have a new computer with Windows 10.  I have connected my LaserJet P2055d and recognized Windows and the driver PLC6.  I don't have the ability to print double-sided, like I did when I was with this printer with a computer running Windows 7.  Any advice would be appreciated on how to acquire the ability to do double-sided printing.

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• HP LaserJet Pro M225dw MFP: Print problems duplex on HP LaserJet MFP M225dw Pro

  Hello, I have a problem with duplex printing. He started only today and no hardware or software has been changed, but now it prints the second side of any printed document asymmetrical. The chisel is always to the same degree. Heres an examlpe of the duplex-printed and scanned document. http://imgur.com/a/uGz23 Hope that you can help me and will excuse me for my English, since this is not my mother tongue.

  Nevermind, the problem was in the cover on the rear side of the printer, paper jams. It has not been closed tight enough, and that caused effect mentioned.

• HP envy 4500 print problems and windows 8.1

  I had some problems printing with my desire to hp 4500. I recently bought this for use with my laptop, which runs windows 8.1. I tried to print wireless with mixed success. I can't print anything product of microsoft office, firefox, etc. I can't print a PDF file or the other - with a catch. If I print the document first with adobe printer, save the document, and then print with the printer of the desire, it will work (for a few pages at least). This happens even if the original document is a pdf file. When I try to print from word, for example, I get a message saying that "your file could not be printed due to an error on HP ENVY 4500 series (network) on. There are several possible reasons...  The scanner works fine with the software provided. Through software troubleshooting, I can print a test page for the hp software, but not the windows printing software (makes me think that this may be a sort of permissions problem that I can't understand). I went through the program of doctor hp, and he says that there is an update of the software. I try to update the software, and I get a message - the printer could not be installed on the network. I'm a bit confused. So - to answer the stupid questions typical-Yes, the printer and the laptop to have the power, Yes, wireless is enabled, Yes, my router works and my printer is connected to it (I can print eoffers/coupons directly from the printer), my diagnostic report is as follows wireless on-pass, wireless working-pass, signal quality-excellent. Connected-pass. unplug the total-7 count, count from last time-1, count last 24 hours - 1. neck of network name (ssid), other corresponding networks ssid-no, the printer settings comply with the router settings without thread-pass, no-pass, Channel-6 filtering, access badge. When I try to print any other documents wthout the adobe solution, I have that is getting the error message that I said previously, or the computer will go through the motions of printing but I never end up having all documents added to the queue. Any suggestions?

  Hello. Thanks again for your help. I found how to solve my problem. I know now that it had nothing to do with the printer or its software. Something was wrong with my registry or files of certain parameters that I couldn't identify myself, that I tried to plug the two this printer in my lapotop via a usb port and installation (with the same problem). The same problem happened when I connected usb printer older that I know works (hp 3050 has-for printing at least) and still had the problem. I just did a windows update and had to reinstall everything. Now, I can print and scan wireless without problem. I would like to have a more simple solution. Maybe the idea of my friend to install a registry cleaner from the beginning was a bad idea. You live and learn, I guess.