LAG does not not after more Guide of switch Configuration for EqualLogic San steps in the document.
We use the information provided in the following document: i.dell.com/.../dell-networking-n4000-series-switch-configuration-guide-for-equallogic-sans.pdf
We have two switches of N4032F which are stacked and followed almost word for Word from this document. We do not use DCB. We are trying to set up a SHIFT and follow-up step 2.11 in the document, but it seems that the SHIFT does not work.
Switch 1:
serial interface fortygigabitethernet 1/1/1-2
No spanning tree portfast
active in mode channel-group 1
Switch 2:
interface series fortygigabitethernet 2/1/1-2
No spanning tree portfast
active in mode channel-group 2
However, when it was discovered after changing these settings it shows them as being inactive.
Can someone please help?
Thank you
Jeff
Thanks for the additional information. When the switches are stacked, they act as a logical switch. Then when you plug with an OFFSET you are basically creating a loop and hook up a switch on himself. Desempilement switches and just use the OFFSET for the interconnection of the switch and you should see the GAL go active.
Tags: Dell Switches
Similar Questions
-
Original title: problem e mail
I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.
Suggestions;
1. make sure that your e-mail program is your default program.
2. make sure that your Internet Explorer, or your main browser has all its faults.
You can do both of the above by following these steps...
Start button > right column, click default programs > click Set Your Default programs...
1. click on your e-mail program > it doesn't say "this program has all its defaults"?
If not, click on choose by default for this program > check all boxes below the list > click on save when finished.2 do the same as above for your Internet Explorer, or your main browser.
-
my web cam isn.t work. When I turn on it says make sure it is turned on. How do I do that? Once when I clickrd on the icon, it came on but exploded when I moved to the screen. Now, I can't get it working again.
Thanks for the help
Hello
1. What is the brand and model of the computer?
2. you receive an error message or error code?
Try the following and see if it helps.
Method 1:
Run the hardware troubleshooting tool.Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter
Method 2:Step 1:Check if the webcam driver is listed in Device ManagerStep 2:
Try to disable the webcam and then turn it on and check if it helps.a. open the Device Manager.
b. click on imaging devices.
c. right-click on the Webcam device.
d. Select Disable.Note: Try the steps up to the c and select on to activate the webcam.Method 3:
I suggest you install the latest updates for Webcam and check if it helps.
Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
Note: If you still have the problem then I suggest to uninstall and reinstall the webcam software and check if it helps.
Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program -
I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?
original title: why isn't my laptop recognize the eathernet link?Go to your computer manufacturer's support web site
and search for the Windows XP drivers for your specific computer or motherboard model number.If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
Then, after installing XP install all device drivers, start by installing the card mother/chipset driver first,
then the SATA, Audio, USB, LAN, etc, drivers.List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
Graphics/video drivers:
Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-usJ W Stuart: http://www.pagestart.com
-
AutoComplete doesn't work does not after installing IE *.
AutoComplete URL function works does not after installing IE8. Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
ticked off) but it is said to "..". turn of Internet Explorer". Whatever that means, and how I seized not semi-automatic work again under IE8? I can go back
for IE7, if it's the only way. I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go... Thank yousjakulski,
Thank you for visiting the Microsoft Answers community forum.In Internet Explorer 8, the Auto complete option is in a new tab. Go to tools, Internet Options and then click the content tab. You will see a section that says "Auto-Complete". Click on the 'Settings' button and it gives you several choices of auto complete options.
This should solve your problem. Let us know if you need more information.
Thank you, Gloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello
Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.
Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).
I did a few Google and found that we need to add something in the Essbase.cfg file as below.
Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).
Possible problems
Analytical services cannot lock enough blocks to perform the calculation.
Possible solutions
Increase the number of blocks of analytical Services can allocate to a calculation:
- Set the maximum number of blocks of analytical Services can allocate at least 500.
- If you are not a
$ARBORPATH/bin/essbase.cfg
on the file server computer, create one using a text editor. - In the
essbase.cfg
folder on the server computer, set CALCLOCKBLOCKHIGH to 500. - Stopping and restarting Analysis server.
- If you are not a
- Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
- Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
In fact in our queue (essbase.cfg) Config Server we have given below added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my question is if edit us the file Essbase.cfg and add the above settings restart services will work? and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.
Kind regards
Naveen
Yes it must *.
Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.
- Set the maximum number of blocks of analytical Services can allocate at least 500.
-
Firefox does not open more than one window at a time, and then opens only new tabs. When asked to open the link in a new window - nothing happens, no error message or the page appears. Otherwise, it works great, but no new firefox window cannot be opened menu or the mouse. I tried to reinstall firefox several times, which did not help.
This has happened
Each time Firefox opened
Is 3-4 months ago
There are some extensions that are causing a problem like that. See this:
http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme... -
HP 3015 printer does not print more than 1 copy both
Original title: all-in-one Hp 3015
3015 HP all-in-one does not print more than 1 copy at a time.
Hi James,
Looks like a problem of printer settings.
Here is something you can try.
1. Select Start, and then devices and printers.
2. right click on the HP LaserJet 3015 printer icon, then select Properties.
3. Select the device settings tab.
4. find Mopier Mode and storage of work settings.
5. change the settings from active to disabled.
6. click on apply then OK and then try to print.
It has worked for many users. It might help you as well. Answer please if you have any questions.
-
LR6 starts does not after decommissioning of CC2015
Hello
After trying Lightroom CC 2015 (. 2?) on mac OS X Yosemite (1 month trial), I decided to buy LR6, rather than taking the subscription to CC. So I bought the DVD LR6 and installed.
After installation, when I try to run LR, I have a picture of trees in the mountain and the program is blocked at this point.
I tried to uninstall everything beforehand CC, removed all instances of Adobe in my file system (in / applications and / library) and reinstalled LR6: does not make better.
I also moved my catalog used during the trial (in ~/Pictures/lightroom), in this case, the program ask me to create a catalog. Then appears in the main window, but I still have the window of launch (with trees in the mountain), and LR is blocked.
I need help. Maybe I need to reisntall OS x from scratch?
Hi brunop,
Please click on the link below to download and upgrade to version 6.3 of Lightroom
Lightroom CC 2015.3 / 6.3 now available
Let me know if it helps.
~ UL
-
Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How do I uninstall the programs of the broken laptop and not running before installing on a new? Sincere friendships Fabian
Hello
If you have access to the machine, turn off Adobe CC applications by the signature of the application.
Please see connect and disconnect to activate Cloud Creative applications
Kind regards
Sheena
-
Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool. Any help would be appreciated?
Same fixed. At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.
-
I downloaded version 5.7 of Lightroom in order to support the captive capture on my Nikon D750 and its still does not. More when I was not invited to give my serial number for update is no where on my Adobe profile, although I bought and pays every month for my creative cloud for photography. Help, please
Your subscription to cloud shows correctly on your account page?
If you have more than one email, you will be sure that you use the right Adobe ID?
https://www.adobe.com/account.html for subscriptions on your page from Adobe
If Yes
Some general information for a subscription of cloud
Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, Adobe support... you need Adobe personnel to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
-
Apple 3rd generation does not after having installed new router put I in the codes manually
Hi recently had outages etc and a new installed router in wifi but now my apple tv 3 does not work but only home screen sharing/settings see I am signed the Mac for home sharing. When I go into network settings I see the configuration is automatic, but the router shows that n/a, does that mean that I have to put codes?
TIA
Wendy
You have connected the Apple TV for the new router? You will need to make sure that the Apple TV is connected to the wifi network, which broadcasts the new router...
Get help with Wi - Fi on your Apple TV networks - Apple Support
-
Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.
Have already tried to contact Adobe and they told me to reinstall the program. I did this and the same issue. It's crazy. I can not turn off something that I did not more...
Thank you.
No - I had, of course, tried all these things. Finally, I had someone (after several days) on the personal chat group that could fix and it did it in a few minutes. Too bad that nobody else seemed to be able to do. Adobe is very soft.
I can't thank enough the other person - it was amazing.
-
Why can I no longer send links to Web sites? By clicking on file > Send link does not work or right clicking on the mouse. Both worked before Firefox 6. I can also send emails to sites that don't specify their address, but to say "send an e-mail, click here. Everything works well in Chrome and Safari, but not in Firefox.
Could you check if your setting for mailto links has been deleted or become associated with an e-mail client that does not exist? Here's how:
Firefox > Preferences > Applications
In the search box at the top of the list, type or paste mailto and make a pause so that the list is filtered.
If change the dropdown to the right column does not improve things (sometimes go to another provider, which, to return and put back OKing won't work), you may need to reset your application preferences. This article has more information on how to delete a file, Firefox will return to the default settings: https://support.mozilla.org/en-US/kb/cant-download-or-save-files#w_reset-download-actions-for-all-file-types
Maybe you are looking for
-
Voltage offset problems with the NO-9401 for PWM signal output
I try to create a 20 kHz PWM signal to drive a motor control circuit uses the NI 9401 module in the chassis OR cRIO-9073. Generating the PWM signal works. For some reason, changes in shift of power as the market factor is increased. It is less effect
-
recently bought this ae3000 adapter... using win 7 64 bit, windows says ae3000 drivers are not installed properly, it can not connect with my belkin n750db router. It doesn't detect single band, dual band does not exist. However, he cannot cannect on
-
HTML content sharing - the context of Invocation and Facebook
Hi all I would like to share content to Facebook HTML using Webworks and the framework of the call. No problem with a text/plain content, but I need something more... do you know guys if it's feasible or not? I saw no examples on this subject or on t
-
If I have no domain how to set up the remote on iOS desktop client?
When I tried to put it to the top of the remote desktop client never worked. I learned later that I had no domain name, if this is the case that type in the user name box in the configuration of remote desktop as he invites me to type in domain/user.
-
No splash screen for Android app
Hello, Newbie here. I just built my first PhoneGap app build IOS/Android and with success running the build process and installed applications on an iPhone 6 (IOS) and Samsung Galaxy S7 (Android). The apps look and work great, except... It doesn't