LAG for sge2000p
Hello
I have 2 connected sge2000p and create on an aggregation of links. Should I create a lag on the second switch too?
Thank you
Thanks mach2
Tags: Linksys Switches
Similar Questions
-
LRT224 - how to have a free installation of LAG for the games
How can I get a free installation of Lag for the games in LRT224?
I already tried to give "High priority" ports used by games like Dota 2, heroes of the storm, etc., as shown below, but the latency is still high.
In our previous configuration with DLink LB604, we used the sticky connection and there is no Lag. We sticky Wan1 related game Ports and 2 Wan for Http and Https Ports.
Is there a way for Linksys have a free configuration of Lag? We use this router now Internet café with 40 customers.
Please help me how to reduce the latency/Ping times. Thanks in advance
If the router of games makes the QOS, then you must disable QOS in the LRA.
Sorry, Linksys has not approved the agreement of beta tester yet. I'll have an update.
-
2808 LAG for use with VMware ESXi and Linux collage
I posted the month last about setting up my work with groups LAG http://en.community.dell.com/support-forums/network-switches/f/866/t/19537080.aspx servers (I'll effectively implementing implement this Saturday)
I decided to buy a 2808 for my ESXi server get more aggregated connections to my staff iSCSI Linux server but now I'm worried I might have made a mistake to buy the 2808.
After looking in the manual before I realized I could have been mistakenly assuming that the 2808 had STP and LACP, as I can't find LACP anywhere in the PDF file. I guess that the configuration of my Linux machine for 802.3ad is out (a hope to make mode 4), so now for the configuration of my house, I wonder (* 1 *) that I have to configure my VMware NIC team like and what mode of binding should I use on my Linux host? As for the section at the top (my working configuration) (* 2 *) I don't know what to do about the road other than the leave as 'route based on originating virtual port ID "? (This is how our other data centers are configured, but I'm waiting for my admin network as agglomerates ESXi hosts are configured with the channels of port on our cisco switches)
For the House, I want to try to increase the bandwidth by using three NICs in each server, I was hoping that it works:
VMware: Route of IP hash function?
w/Linux: balance-alb?-VMware:
Before you begin:- The default load balancing strategy is route based on the port virtual origin ID. If the physical switch uses the aggregation of links, route based on the IP hash load balancing should be used. For more information, see host requirements for the aggregation of links for ESX and ESXi (1001938) and the guide of VMware Virtual Networking Concepts .
- LACP support was introduced in vSphere 5.1 on distributed vSwitches and requires additional configuration. For more information, see activation or deactivation of LACP on a group of ports Uplink using the vSphere Client Web (2034277).
- Ensure that the Protocol of aggregation VLAN and link (if any) are correctly configured on the physical switch ports.
-Linux:
* Descriptions of bonding modes *.
+ Mode 0 balance-rr: Round-robin policy: transmit packets in the sequential order of the first available through the last high school. This mode provides load balancing and fault tolerance.+ 1 active-backup mode: Active-backup policy: only one slave in the link is active. A different slave becomes active if and only if, the active slave fails. MAC address of the binding is visible from the outside on a single port (NIC) to avoid confusion between the switch. This mode provides fault tolerance. The first option affects the behavior of this mode.
+ 2 balance-xor mode: XOR policy: transmit based [(adresse MAC XOR avec destination MAC traiterait de source) modulo County slave]. This selects the slave even for each destination MAC address. This mode provides load balancing and fault tolerance.
+ 3 broadcast mode: broadcasting policy: transmits everything on all slave interfaces. This mode provides fault tolerance.
+ Mode 4 802.3ad: IEEE 802.3ad dynamic aggregation of links. Creates aggregation groups who share the same speed and duplex settings. Use all the slaves in the active aggregator according to the 802.3ad specification.
-Prerequisite:
-1.Ethtool support in the base drivers to retrieve the speed and duplex of each slave.
-Switch 2.A which takes care of IEEE 802.3ad dynamic aggregation of links. Most of the switches will require some type of configuration to activate 802.3ad mode.+ Mode 5 balance-tlb: Adaptive load balancing transmission: Channel link that doesn't require any special switch support. Outgoing traffic is distributed according to the intensity of the current (relative speed) on each slave. Inbound traffic is received by the current slave. If the receiving slave fails, another slave takes over the MAC address of the failed receiving slave.
-Prerequisite:
-1.Ethtool support in the base drivers to retrieve the speed of each slave.+ 6 balance-alb mode: Adaptive load balancing: includes balance-tlb plus receive balancing (rlb) for IPV4 traffic and doesn't require any special switch support. Receive load balancing is achieved by ARP negotiation. Link driver intercepts the ARP replies sent by the local system on their way and replaces the hardware address of source with the unique hardware address of one of the slaves in the bond as different counterparts use different physical addresses for the server.
The topic dell nearest you, I have found a useful was: http://en.community.dell.com/techcenter/networking/f/4454/t/19415629.aspx
my previous post was more concerned with VLAN tagging and spanning tree issues, but now I see I should have feared groups LAG it as well.
Any help would be appreciated, thanks in advance all :)
-
PS. http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/dell-powerconnect-2800-series-spec_sheet.pdf said that the 2800 series supports LACP, so if I'm worried about anything on my iSCSI side slap me please in the face, but I guess even in this case, I'm still not sure how to configure the ESXi host because it does not support LACP without vSphere and my original configuration is a free version , so I have no web vSphere management needed to make the LACP allow the change.
Not sure if it is of no use: example configuration of EtherChannel / switches control protocol LACP (Link Aggregation) with ESXi/ESX and Cisco/HP (1004048), but that's where I was to base the choice on IP hash from.
It must have the support of layer 3 to achieve IP hash, IP addressing is a 3-layer technology, so a 6200 series or higher or the soon to be released N3000 series.
-
Hello
I would like to connect my WLCs (5508) to HP Procurve switches.
Is I meet any problem if I chose to configure ports WLC for LAG?
The 7.0 config guide talks LAG as being a partial implementation of 802.1ad.
The guide speaks also on the connection to a catalytic role.
I see that HP also refers to the aggregation of links like LAG.
They will work together? Or do I have to separate AP Manager interfaces to separate the ports?
Thank you
Justin
Justin,
I've been on many cases where the WLC has been connected to a HP switch configured for DELAY. This works, you need just to make sure that the VIRTUAL networks are set up correctly on the trunk of HP. that is, make sure that properly define the bits containing the identified tag/no / no..
-
Db recovery mode standby idle DG and lag for days.
We have a 2 RAC primary node and a node 2 RAC qa ensures environment under redhat linux.
There are two nights some interviews caused primary down, and db switched to standby mode. and now I've discovered by dgmgrl the following error:
DGMGRL > see Configuring
Configuration - oraqa_dg
Protection mode: MaxPerformance
Databases:
orasqa - primary database
Error: ORA-16810: multiple errors or warnings found for the database
oraqa - (*) Physical standby database
WARNING: ORA-16829: accelerated failover configuration is trolling
Fast-Start Failover: ENABLED
The configuration status:
ERROR
DGMGRL > failover to oraqa
Perform the failover NOW, please wait...
Error: ORA-16600: not connected to the database target of standby for failover
Failed.
Unable to failover
DGMGRL > passage to the oraqa
Continue to pass, please wait...
Error: ORA-16810: multiple errors or warnings found for the database
Failed.
Impossible to failover, primary database is still "orasqa."
I started to recover standby database managed using disconnect log current;
and see an a MRP of the running process node, but the other node does not.
recovery mode is inactive and without recovery from media alert logs.
TIME TO NEWSPAPERS
---------------- ------------------------
Last application: 21 - FEB - 13:01:16:34
Finally received: 21 - FEB - 13:01:16:34
UNIT NAME VALUE
-------------------------------- ---------------------------------------------------------------- ---------------------------------------------
apply day (2) over time to second interval (3)
apply the day lag (2) second interval (0)
about 32 seconds startup time
day (2) lag transport at second interval (0)
Calculated time: 22/02/2013 15:23:10
How can I get media recovery began?
Another question, I discovered through crsctl res stat, the db pending status intermedia.
ORA.oraqa.db
1 LINE intermediate oracle02 Mounted (closed)
2 (closed) mounted INTERMEDIARY online oracle03
Please advice what I can do from this point.
Thanks in advance.982335 wrote:
updates:I finally got all the reconstruction work the day before (previous primary) primary (previous standby).
Now everything works.
However, I want to the previous primary crossing as primary.
What do I have to configure anything to keep him there as primary?
Thanks in advance.
Uh, waiting for reconstruction is not the right solution. I expect not to rebuild the day before. I prefer to troubleshoot and resolve the problem. If in case there is no information of what I asked in my previous posts, then in the worst support we can take tips from Oracle Support.
So that you, me, everyone can learn what it exactly was behind all this. Next time, I suggest to "Troubleshoot & problem" rather than rebuild. :)
>
There seems to be network problems and I can not say exactly.
I will propose to show all files of newspaper broker after issuance of 'view' to restore order?
also relate alert the log file for any type of information. -
It started about a month or two it y a. almost all Web sites that I visit Firefox lag or stalls pure and simple script error messages, giving me the advice (not responding) to the top of the page or do not respond.
I tried all suggestions that I found in help, including "Firefox uses too many resources", "Firefox crashes or does not ', and 'Unresponsive script - how to fix. I deleted the history, cookies and cache, reset Firefox, reinstalled, all what I can. I disabled all my extensions and modules one by one to see that if they touched, I took care of everything, including Firefox is updated. Nothing has changed behavior.
Here, any help would be appreciated.
How about a whole new profile?
SEE: use the Profile Manager to create and delete profiles Firefox
-
Hello
I just bought the new MacBook Pro with Retina Display Mid 2015
2, 8 GHz Intel Core i7
16 GB OF RAM
AMD Radeon R9 M370X
AE v. 13.5.1
I installed CC applications as usual and everything was fine until today. Ive been using before AE with this new computer and everything worked smoothly.
Nothing has changed in terms of parameters or updates. He just started lagging. I can't use it because its boring. Whenever I click on something it is lagging! This also happens when there is no open compositions, just the app and the im through the settings.
IM new to this forum so I hope someone can help!
If you need a form more just say.
Thank you very much!
I've seen a number of people with questions on these forums with images keys do not release when you release the mouse and other weird things - almost always when a Wacom tablet has been installed. The problem persists even if the Tablet is disconnected.
I wonder if your problem is.
-
Why typing lag is in the Wordpress Editor?
Typing in the editor WYSIWYG in Wordpress is laggy since Firefox 5: enter, backspace lag for example nearly a full second while other keys as letters are delayed on a sporadic basis.
In safe mode, the lag is almost non-existent.
Application of safe mode settings (addons disabled, reset configuration, etc.) mode normal does not help.The HTML part of the editor of the post is very good and I also had no problem with the editors of forum or this form as I type right now.
Troubleshooting extensions and themes
Check and tell if its working.
-
Updated to 4.1.B.0.587 for Xperia Arc (Philippines)
The NEW update
The previous update
One thing is much changed: INCREDIBLY FAST ICS EXPERIENCE! (Even with the Bloatwares!)
After weeks of work with the new firmware.587, it's that some of what I've noticed lately.
1. When you use an application that is designated to be in the landscape, Launcher Home sometimes buggy, it displays a black screen with notifications on top. Once also seems when I got home, my pitcher has got to be in the landscape, which is weird.
Which is irritating, it's that you've closed all your apps, and always, host is configured to be on a black screen, untouchable, during a rotation in the landscape. PHONE MUST RESTART to get all things right again.
2 LED Notifications SOMETIMES works, but is NOT all THE TIME. I noticed when looking for whenever he goes to light when there is a new SMS or harmful, it will light.
3. battery management seems very good with the new firmware, as I noticed.
Post edited by: rency0722
What's new dans.587 firmware here:
- LED of Notifications are working for new messages, new messages, missed calls and 3rd party applications.
- Incredibly fast Home Launcher, without the lag.
- Integration of Facebook for the Xperia is changed with 'Sony-integration of Facebook', nothing has changed except the name.
- No lags for recording HD video, even with the Image Stabilizer on (unfortunately, still monophonic audio)
- Movies Blu - Ray (720 p HD video, audio 5.1 ch) are now playable without offset (tried using MX Player)
- Dialer opens now in 1-2 seconds only, as well as the Smart Dialer feature now works without lag and sound errors.
- Contacts are now available more quickly when choosing recipients for SMS.
-
My specs:
Windows 7 Ultimate x 64 (formerly Windows 8 Pro)
4 GB OF RAM
HARD DRIVE 500 GB
1 GB nVIDIA GeForce GT M 620 (as well as the Intel HD Graphics 4000)
Intel Core i3 3 rd Gen 1.80 GhzI installed Red Alert 3 and tried to play. The game was set to medium settings with Pixel Shaders, the average value and shadows, the vertical sync, etc. set to OFF. The game play is smooth, but after a while, the game rowing for about 10 seconds and becomes smooth. I know that I have exceeded the minimum requirements for the game, and I have the latest video drivers installed. It happened before I reformatted my laptop (I used to have 8 pre-installed Windows).
The same thing has happened for Command and Conquer Generals Zero Hour, with a lag for 10 seconds and then game becomes smoother after a while.
However, I noticed that after reducing to the minimum the game for some time and come back once more, that the game runs EXTREMELY smooth but lag after a few seconds. The game is playable but there is constant lag that irritates me, I tried to keep VERY low settings, but still no luck.
I can run Left4Dead, Left4Dead2, and Half Life 2 without any problems.
Can someone help me?
Thank you! :)
Try to update the nVidia drivers. If no update is available, uninstall the drivers, reboot the PC, reinstall the drivers, reboot the PC and then check.
-
Internet random Lag Spikes - M14xR1
Since yesterday evening, 26/10/12 I have experienced random lag spikes on all games (Hawken Beta (installed yesterstay) Mechwarrior beta, MW3 and BF3).
* Display rate doesn't drop when the shift happens
* Last lag for 1-3 seconds
* Shift occurs on cable connections and wireless
* Shift occurs when person not me is on the network, and while others are on it as well
* Only occurs during the game I can say
* Not sure if other computers on the network are late because none of them are computer games
* I did tests using SpeedTest and ping/DL/UL speeds are normal
* Tried to disable the antivirus (Kaspersky). No change
* Ran virus scans and malware using malwarebytes and Kaspersky. The two negative resultsAny suggestion or test that I can run to see if it's a portable hardware problem or a problem of router/modem question/ISP?
Cable ISP
Cisco modem (telephone)
Netgear gigabit routerM14x-R1
Intel I5 - 2430M
8 GB RAM
GeForce 555 m 3 GB
Killer Wireless-N 1103It has been almost 2 weeks now, and the problem hasn't returned since I saw a bucket truck at the end of the street, working on the node. Pretty fun I never even get a call from the supervisor telling me that he had sent someone to the node. Suppose finally he realized that I was right.
-
Unbearable adjustment brush Lag
Hello.
Faced with a few adjustment absolutely terrible brush lag for centuries now. Everything works perfectly, my graphics card is perfectly fine, and I make sure that no other programs are running in the background. She is too sporadic – I could have little or no harm in a photo and monumental questions in the next. I tried absolutely everything possible to reduce the lag without result. Any suggestions?
Yes, of course, fixing it is out of your control, Adobe can only solve this problem by reprogramming of this function, and it won't happen in version 6.
-
I have two hosts (vhost1 = ESX 4.0, vhost2 = 5.5 ESX) both are configured for the Group and both connected to a switch of 1544 Adtran L3 (named sw01). vhost1 has been in production for several years with the config below and has been solid as a rock. I'm trying to reproduce the installation of grouping/collage on vhost2 and it does not work when are associated but will work when you are using a single NIC (with or without aggregation).
To be more specific about what does not work, two virtual servers have "Network server" (vlan 8) defined as a group of ports. Both physical and virtual servers on the same vlan cannot ping or resolve queries arp for virtual machines on vhost2. Everything that is sent from a different subnet can connect to the virtual machines on each virtual server.
So the question is this: why not ESX 5.5 works as ESX 4.0 when the configs are also near identical, as I can make them and they are connected to the same switch?
Thanks for any input you can provide!
S
This is the configuration for vhost1
switch 1 (sw01)
SW01 #sho run int port 3
Building configuration...
!
!
interface port-channel 3
Description LAG for vhost1
no downtime
switchport mode trunk
switchport trunk allowed vlan 1.8
!
end
SW01 #sho run int 0/23 concert
Building configuration...
!
!
0/23 gigabit-switchport interface
Vhost1 vmnic2 vswitch1 description
no downtime
channel-group mode 3 on
!
end
SW01 #sho run int concert 0/24
Building configuration...
!
!
0/24 gigabit-switchport interface
Vhost1 vmnic1 vswitch1 description
no downtime
channel-group mode 3 on
!
end
vhost1
[root@vhost1 ~] # esxcfg - NICS - l
Name PCI Driver link speed Duplex MAC address MTU Description
vmnic0 03:04.00 tg3 up to 1000Mbps Full 78:e7:d1:5f:01:f4 1500 Broadcom Corporation NC326i PCIe Dual Port Gigabit Server Adapter
vmnic1 03:04.01 tg3 up to 1000Mbps Full 78:e7:d1:5f:01:f5 1500 Broadcom Corporation NC326i PCIe Dual Port Gigabit Server Adapter
[root@vhost1 ~] # esxcfg - vmknic - l
Interface Port Group/DVPort IP IP family address Netmask Broadcast MAC address MTU TSO MSS active Type
vmk1 VMkernel - Server NetIPv4 10.1.8.31 255.255.255.0 10.1.8.255 00:50:56:78:9e:7e 1500 65535 true STATIC
VMkernel - SAN Net IPv4 10.1.252.20 vmk0 255.255.255.0 10.1.252.255 00:50:56:7 c: d8:7e 9000 65535 true STATIC
[root@vhost1 ~] # esxcfg - vswif - l
Port Group/DVPort IP IP family name address Netmask Broadcast Enabled TYPE
Service vswif1 - NetIPv4 management 10.1.1.12 console 255.255.255.0 10.1.1.255 true STATIC
[root@vhost1 ~] # esxcfg - vswitch - lSwitch name Num used Ports configured Ports MTU rising ports
32 4 32 1500 vSwitch0
Name PortGroup VLAN ID used rising Ports
0 3 VM network
Switch name Num used Ports configured Ports MTU rising ports
vSwitch1 64 12 64 1500 vmnic1, vmnic0
Name PortGroup VLAN ID used rising Ports
Server network 8 7 vmnic1, vmnic0
Console - management service vmnic1 Net0 1, vmnic0
VMkernel - server 1 vmnic1 Net8, vmnic0
On the Load Balancing vSwitch it Hash IP value.
This is the configuration for vhost2
switch 1
SW01 #sho run int 4 port
Building configuration...
!
!
interface port-channel 4
LAG description for vhost2
no downtime
switchport mode trunk
switchport trunk allowed vlan 1.8
!
end
SW01 #sho run int concert 0/17
Building configuration...
!
!
0/17 gigabit-switchport interface
Description vhost2
no downtime
channel-group mode 4 on
!
end
SW01 #sho run int concert 0/18
Building configuration...
!
!
interface gigabit-switchport 0/18
Description vhost2
no downtime
channel-group mode 4 on
!
end
vhost2
~ # esxcfg - NICS - l
Name PCI Driver link speed Duplex MAC address MTU Description
vmnic0 e1000e up to 1000Mbps Full 00:25:90:e7:0e:9 0000:08:00.00 1500 c Intel Corporation 82574 L Gigabit Network Connection
vmnic1 0000:09:00.00 e1000e up to 1000Mbps Full 00:25:90:e7:0e:9 d 1500 Intel Corporation 82574 L Gigabit Network Connection
~ # esxcfg - vmknic - l
Interface Port Group/DVPort IP IP family address Netmask Broadcast MAC address MTU TSO MSS active Type
Management 10.1.1.15 IPv4 network vmk0 255.255.255.0 10.1.1.255 c 1500 65535 real STATIC 00:25:90:e7:0e:9
~ # esxcfg - road - l
VMkernel itineraries:
Interface of network gateway subnet mask
10.1.1.0 255.255.255.0 subnet local vmk0
by default 0.0.0.0 10.1.1.1 vmk0
~ # esxcfg - road - n
Expiration type neighbor Interface MAC address
10.1.1.1 00:a0:c8:8 has: ff: 3 b vmk0 19m13s unknown
~ # esxcfg - vswitch - l
Switch name Num used Ports configured Ports MTU rising ports
vSwitch0 4352 7 128 1500 vmnic0, vmnic1
Name PortGroup VLAN ID used rising Ports
Server network 8 1 vmnic0, vmnic1
Management network 0 1 vmnic0, vmnic1
On the Load Balancing vSwitch it Hash IP value.
Hello
Do you share the vmnic for ESXi management and network of the VM?
Try to follow the steps in this KB: VMware KB: NICs using EtherChannel grouping allows intermittent network connectivity in ESXi
Trying to team adapters using EtherChannel, network connectivity is disrupted on an ESXi host. This problem occurs because grouping NIC properties will not propagate to the network management portgroup in ESXi.
When you configure the ESXi host for grouping of NETWORK cards in attributing to the road based on ip hashload balancing, this configuration is not propagated to the portgroup management network.
Workaround
Note: to reduce the possibility network loss please change the route based on the hash of IP using this method of balancing load vSwitch
- Close all ports in the physical switch team leaving a single port as active.
- Change the Route based on ip hash vSwitch and load balancing management Portgroup.
- Set up the physical switch port channel.
- Activate the physical switch ports.
Notes: Using this method will avoid a loss of connection when you switch to a port channel. Also make sure that under the properties for vmk portgroup # used for network management you tick the box "Enabled".
-
And now... the dreaded LAG (yet)...
OK, so now it struck me also. Photoshop CC2014 now has about a lag of one second on all operations of adjustment layer, including ignition and extinction of the layer. Direct pixel adjustments also have this lag of one second. Everything else, including brushes, seems to operate normally.
It comes to my home computer, a system i5 - 750, which is about five years old, but updated for the SSD and otherwise works fine. My other system to work, a new i7-3820, has no problem. Win 7 Pro 64 on both.
Points of interest:
- He is there not video card / OpenGL related. Deactivation of the GPU in total does no change, and neither does Basic > Normal > advanced.
- PS The CC (2013) works always normally, no lag.
- I have only two plugins (StarFilter Christmas and Alien Skin Bokeh). Uninstalled both, no change.
- Uninstalled the driver for Wacom completely. No change.
- The file size seems to matter. Very pronounced on D800 files, less affirmative D300 (but still there), negligible on the web of size.
- The i5-750 is quadruple-heart, and the Task Manager indicates less than 60% CPU load, distributed on an equal basis for the lag. No problem.
- Lightroom, which is also very sensitive to performance issues and lagging for nothing, still works perfectly. There's no lag.
- No new fonts added to the last year.
- Let the 2014.2.2 update to sit until about a month. Since then, for various reasons, Photoshop has not been used much on this system so far. So who could be.
Another thing I have to look? Again, I have an attack and an unaffected system. They are configured very similarly, but a slightly different material.
Well, well, well... the good old three fingers Hi toured. And here I am, getting ready to roll back to 2014.2.1.
Corrupt preferences, not less. I think that it is the first time I need the launch of alt + shift + ctrl, and it'll be the first thing I will try next time, I have weird behavior in PS.
Now, everything is happiness. I think I will celebrate with some points for the correct answer
-
Satellite L50t-1605 - shattering everything in game using nVidia 950 M
Hi friends,
I bought by Satellite L50t-1605, which has 5500 i7, gtx 950 m dedicated 4 GB...
but from the first day, it has offset in each game I play (GTA 5, ETS2, FIFA14, line PES16 battlefield hard etc...) I updated my drivers so as there is no change... Help, please...Cordially Alexis
[/ Quote] dude I have the same laptop and it's having a * cooling so if you have a program the temp display, you will see that you will get rich 105 temp of some lag for about 3-5 seconds and will happen a lot when playing most of the games so we must do the maximum of 75-95% CPU usage
Maybe you are looking for
-
I used DownloadHelper for years and have not had this problem before. He started about the time I did the update to Firefox, but I don't know which was the exact trigger. It seems you are trying a download that something is listed in the list of down
-
I have disabled biometrics, since I don't have the equipment, now it requires me to login using a password that I do not have since I have NEVER entered a password since I bought it (2 weeks ago).
-
Install certificates for EAP - TLS does ACS does not work
Hi all I have two problems. I produced a CSR ACS and sent my people to windows this and they published my ACS with a certificate. Cool. I'm going to download the GBA and I put a 'private key file? What is this file? and where can I get a? What is thi
-
BlackBerry Smartphones SD card does not click in when inserting
Hi, I just bought a san disk 16 GB micro-sd scard. I tried threading, (with the face of metal rods until you look at the screen). He slips but doesn't click in place, instead it comes out back unless I close the lid. It's not set up no matter what me
-
Desktopmanager BB of Smartphones blackBerry sync email setup problem
I installed the software v5.0.1 then I click on sync I can't check the option synchronize e-mail messages. What has a grey block in front of the option What should I do? Thanks, JS