LALA LP116cn

Similar Questions

• Satellite C55 - c1585 Drivers not found

  There is no drivers for Satellite C55-c1585 model PSKWTV-00F00EAR on the Web site where I can find
  the model is not on the page of the driver only on products? !!!

  Posted by faresghanem
  

  There is no drivers for Satellite C55-c1585 model PSKWTV-00F00EAR on the Web site where I can find
  the model is not on the page of the driver only on products? !!!

  Hi friend
  Even more on your application you can download the driver from site below:
  http://www.Toshiba.EU/innovation/Dow...jsp?service=EU

  Here, you have followed with C55 - C range with the model PSKWTV number selection.

  If you have any more questions just let me know.

  Kind regards
  Lalit

• HP z2100: Firmware update would not - is there a way to put the firmware directly on the HARD drive?

  I was really happy to correct my hp z2100 today... lala lala and then update firmware to be updated!

  What a mistake!

  Everything was fine until the end when the printer said it restarts and after that it does not start. I think the drive hard does not have the system on it more and cannot start.

  What now?

  Scroll down this thread:

  http://h30434.www3.HP.com/T5/Designjet-large-format-printers-and-digital-press/Designjet-Z3100-Z3200-LCD-blank-amp-power-green-LCD-blinking/m-p/5075020#M3843

  Maybe it's the same problem, I've had a few years on a Z2100.  Updated the firmware and the printer would not restart.  Reinstall from cable to the screen, and everything came back OK.

• My WNDR4500v3 wireless is disabled.

  Wireless stopped working router and when I scanned it for SSID on my devices (Smartphone and Smart TV) wireless SSID does not appear on the list of networks wireless found. I rolled power unit several times, to no avail. I need to find my DVD or what to get in touch with the router? Do a reset factory and start over? Or throw it on my pile growing routers failed and go buy a new one? Once again? Thanks in advance. I'm annoyed sort of Netgear will not be replied to my question.

  I don't know why. The router is plugged into a powerstrip protected against overvoltages and we did have a power outage for at least a year now. My Netgear Extender should always work.

  I offered to send Netgear this router for the autopsy (or should it be autopsy?) and I'm waiting to hear back. I have spent the last ten years, debug firmware for a living, so I know have broken material at hand to find problems much easier. It can help some other poor soul in order to avoid the same problem.

  The local Best Buy has a few wifi routers. I wish we had a French FRY in Idaho store. Whenever I came down to LaLa land, I used to wander around this store until my credit card cried UNCLE.

  Could also look at this thing of 4 K TV all in BB. I already know that we will not get the curved screens.

  Thanks for the info.

  Jim

• Problem with software

  Dear Sir, I have laptop Tosshiba with 8 64-bit window & I use the HP Laser Jet M1005 printer for personal use. I already install the HP letest printing software, but its not working help me please.

  Concerning

  Bhajan lal

  Crowd [edited by Moderator]

  Hi @mohitkumar ,

  Thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information such as Mobile phone number in your message. Our Participation rules:
  
  Protect privacy - yours and others. Do not share something about yourself that you do not want to see on a billboard on the road. Do not post contact or other personal information - your own or someone of another--or of any content that you receive in communications one without the consent of the author. For example, do not post your n ° of series or publicly coordinated computer and not let someone you don't know to take control of your computer remotely.
  
  If you need people to contact you directly, or ask them to send you a private message, or subscribe to the discussion then you will be notified when there are replies. You can also click on your name anywhere in the forum and will take you to your profile page, where you can find a list of threads, that you participated.
  
  Sharing personal addresses, telephone numbers and family names not suitable for your safety. If you have any questions, feel free to send me a private message in response.
  
  Thank you
  George

• Compaq 6530 b: no operating system found

  My apologies for my knowledge of basic computer skills. Right... So my laptop girlfriends was virtually bankrupt, if someone had a look for her and replaced windows with ubuntu. She asked me to see if I could give windows on as she did not like the new operating system.  So try to follow some instructions online that were probably too advanced for me I managed to remove the old operating system, but when I tried to install windows he had many other problems... My ISO Windows Me brings to the installation page, but when asked for the product key, it is said that the key is not valid. ISO I use is a windows ISO 10 from another computer, I have had a look on the internet for a windows vista ISO but can't seem to find a. What is the reason that my product key does not work? I cannot go into the start menu and when I try to boot from the CD I can enter here but boot CD won't let me do a reset. It's a laptop second hand, so it was not a boot with her CD.

  Thanks in advance to that whether you answer Please HELP ME!

  Lala-swfc

  Hello;

  Let me welcome you on the HP forums!

  I read your post regarding your installation of Windows problem and wanted to help.

  First - some background on the Win10 FREE offer.  This only applies when the two things are true.

  First of all, the machine should already have a copy installed and activated Windows and which must be Win7, Win8 or Win8.1.  It's an upgrade of Win10 and you get activated by the machine REUSING the existing license.  This is known by MC as digital right.

  Second, if you are installing a new disk, you must have a valid product key for Win7, Win8 or Win8.1, and the Win10 must be the version 1511, release 10586 - downloaded or created after November 2015.

  So basically, you can not intall Win10 and activate it using a Vista product key. period.

  Also, the keys listed in Win10 are the generic Installation keys.  And while they can be used to install Win10, they cannot be used to activate it.  He insists the key Win7, Win8 or Win8.1.

  You get the Win10 ISOs using the MS Media (MCT) tool: 10 Windows Installer using the media - Windows help authoring tool

  The end result is to activate the Win10, you will need to purchase a license.  Sorry... that's how it is.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Unable to install FSHOTSFX on Windows 7 64 bit.

  Original title: error: 91 object variable or variable block not set__And error: 429 ActiveX component can't create object

  People:

  I need your help. I have a registered copy of the program FSHOTSFX.  I very well, runing this program on windows xp pro 64-bit.
  But I couldn't make it work, since I migrated to 64-bit edition of windows 7 Home premium. Unfortunately the manufacturer of the program offers no more support services. The sad part is that almost all of my 32-bit programs back to windows 98 work well on windows 7 64-bit.
  You can download a copy of the free installation of this program to test here: http://fshotseat.com/dl/FSHSFXFull11.asp

  Here is the error message I get when I open the program:

  < fshotsfx="" failed="" to="" load="" properly.="" check="" the="" fshotsfx.log="" file="" in="" the="" install="" directory.="" if="" you="" do="" not="" understand="" the="" error="" codes,email="" the="" log="" toemail="" removed="" for="">
  Fshotsfx ends now... >

  then, after clicking on ok, I get the following message:

  < run-time="" error="" '91':="" object="" variable="" or="" with="" block="" variable="" not="" set.="">>

  the after clicking ok, the program stops.
  Thank you for your help.
  Frank.

  Here is the full report of the log file:

  Processor: Intel Pentium
  CPC: 2@2099 MHz
  LDM: 35%
  CRT:-270,155,776 bytes
  ARM:-1,708,634,112 bytes
  TVM: 2.00 GB
  AVM: 1.87 GB
  TPM:
  APM:
  OSP:
  OSV: 6.1
  OSB: 7600
  OSS:
  LAS: 4105
  LAL: 1033
  VHS: 1.1.61
  CKS: 46F2D13F887D469DB90977A76A331197
  08/02/2010 10:14:10 - files FSHS_DS1:C:\Program

  (information from the seller x86)\FSHotSFX\sound\splash.mp3/No

  Provided
  08/02/2010 10:14:10 - I FSHS_DS2:MPEG - Stream

  The seller-Splitter-no info provided
  08/02/2010 10:14:10 - FSHS_DS3:MP3 Decoder DMO/no

  Provided the seller Info
  08/02/2010 10:14:10 - FSHS_DS4:Default

  DirectSound Device no. seller Info provided
  08/02/2010 10:14:11 - FSHS_Primary Sound

  Driver, speakers (Realtek High Definition

  Audio) / 200000:1 / 0:0 / 0
  08/02/2010 10:14:11 - FSHS_FLT = C:\Users\administrator

  \Documents\Flight simulator files
  08/02/2010 10:14:11 - FSHS_CFG = C:\Users\administrator

  \AppData\Roaming\Microsoft\FS9\FS9.cfg
  08/02/2010 10:14:11 - C:\Program FSHS_FSPath

  Files (x 86) \Microsoft Games\Flight Simulator 9
  08/02/2010 10:14:11 - FSHS_Mp3H: * error: 429

  Component ActiveX cannot create object
  08/02/2010 10:14:11 - FSHS_ObjOk
  08/02/2010 10:14:11 - FSHS_MainOk
  08/02/2010 10:14:12 - FSHS_217 * object error: 91

  variable or With block variable not set
  08/02/2010 10:14:12 - FSHS_IPCvr_3.98a
  08/02/2010 10:14:12 - FSHS_IPCty_Type +.
  08/02/2010 10:14:12 - FSHS_IPCra_10
  08/02/2010 10:14:12 - FSHS_IPCsc_10
  08/02/2010 10:14:12 - FSHS_InitOk
  08/02/2010 10:14:12 - FSHS_LdTm
  08/02/2010 10:14:14 - FSHS_P0 R0, A0
  08/02/2010 10:14:14 - FSHS_AGA:0 / 0
  08/02/2010 10:14:14 - FSHS_ERRPT: 1 x 429 ActiveX

  the component cannot create object
  08/02/2010 10:14:14 - FSHS_ERRPT: 1 x 91 object

  variable or With block variable not set
  08/02/2010 10:14:14 - FSHS_CPX: 0
  08/02/2010 10:14:14 - FSHS_1

  Hi Frank,.

  I installed the program successfully.  The files will be in a Zip folder, please extract the contents of the folder.  Once the contents of the file has been extracted, right-click on the Windows Installer package and go to properties.  There should be a Compatibility tab.  Be sure to run this program in compatibility mode and proceed with the installation.  If this program is still not able to be installed, you need to get a 64 bit version of the software.  If you please you would follow with me at your convenience, I would be very happy.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Photosmart HP 7520 - message that the printer is offline or there is a problem

  Trying to set up a new printer HP Photosmart 7520 wireless.  The test print off shows that everything was fine.  I closed my firewall and tried other diagnostic tests.  Everything tells me my printer is fine, but when I try to print anything I got a message saying that the printer is offline or there is a communication problem with the printer.  Can anyone help with this?

  Moved from feedback

  Original title: impression of the printer

  Hi Lala,

  1 did you changes to the computer before the show?

  2. what operating system you have installed in the computer?

  See the steps from this link:
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02221706

  I suggest you also following article to solve printer problems in Windows Vista and Windows 7:

  Solve printer problems
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-printer-problems

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

• win xp pro max ram

  What is the maximum physical ram Windows XP Pro will support?

  I read a few sites and no one is constant over a predetermined number. They say 2-4 gig so some say there is a switch to allow 3 or 4 or something.

  Is there a definitive answer, and if I exceed this limit it slows down the process?

  Exceeding it slows down the CPU? I need to change flies or change something?

  Since you said "go beyond" I assume you have 32-bit.

  With more than 4 GB and RAM only it will slow down, but XP 32 bit will not see the extra RAM.

  I want to upgrade my PC and I am running 2 GB of ram DDR3 - can get 16gig ram (ooh lala) so I was wondering if the Ram is on my list of things to do or an expense I don't have.

  Unless you use programs that require a lot of RAM, 2 GB is fine for XP.

  If you have XP 32 bit will be be wasting money by buying 16 GB of RAM - she will not see the extra RAM past 4 GB.

  You can save money and just buy 4 GB of RAM.

• I can't in my mini laptop, is it says enter password current someone help thanks

  I can't get into my mini laptop. It says enter current password. Someone help me please here thanks

  Try to lala.

  e9lofuvd99

  3rd letter tiny L.

  4th letter lowercase O.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Regarding the laptop screen

  Hello

  I use Notebook 15 r015tu win race 8. I am facing some prblm in display. Currently my system running with base in which display adapter light controllers do not work and the screen is extremely irritating to the eyes, the quality is not good. Please help me out of this.

  Regarding

  Lalit (personal information)

  Hi Lalit0068

  Install:

  IRIS with Intel® HD Graphics Driver for Windows * 64-bit 7/8/8.1

  IRIS with Intel® HD Graphics Driver for Windows * 7/8/8.1 32bits

• Reinstall the Windows XP with SP3 causes flickering on the screen

  Hello

  I recently reinstalled Windows XP SP 3 on my laptop. After installation, I started to notice that the screen flashes when I try to move or down in windows Explorer or even browsers. I thought that it could be linked to the frequency of the screen refresh.

  I noticed that refresh is set to "default to the setting material" and it gives me no option to change to 60 htz.

  can someone help me figure this out?

  
  

  You probably need to update driver for video (monitor) card. Or simply you need set the appropriate (through software coming with driver) discount rate.

  Optional: You can also customize some parameters of performance (uncheck the display contents of windows slides & lala).

• Blocks VIRTUAL local network access to a tunnel VPN IPSec on WRV200?

  I have two identical WRV200 wireless routers which are connected by a VPN IPSec tunnel.  This goes to my LAN LAN of my parents.  Everything works well.

  But I also have my WRV200 configured for two VLANS.  Vlan1 for my network and secure wireless access.  VLAN2 for a WiFi not secure for customers.

  My problem is that my guest on VLAN2 slips through the VPN devices and access on LAN of my parents.  I'm looking for a way to block to do this.

  I use the version of the software on the two routers (v1.0.39).

  For what it's worth, I know that my receive an IP address in the range 192.168.x.101 DHCP - 199.  I could assign a different range if that helps.  I thought that I could block this beach on the remote router firewall, but I see there is blocking a single IP address at the time, maximum of 8.  Am I missing something?

  Or could I put something weird in the routing tables somewhere to get the IPs guest out of lala land?

  Any suggestions are appreciated.  I can't be the only one in this boat.

  Steve

  Try to check local and remote, vpn under safe group settings if you change the ip address range subnet. Don't include the range of ip addresses of the computers wireless comments so that it will not pass through the vpn tunnel. If there is no ip range option, you must to the subnet of the network in order to control the ip address you want to allow on the vpn tunnel.

• PLEEEEEASE MICROSOFT... HELP ME FIX THIS MESS I AM! RECLAIM 10 TO WIN 7 - OH NO.!

  COMPUTER HP - EAST RECENTLY RETURNED TO WIN 7 OF WIN 10 UPDATE.

  I should stay with 7.  I SHOULD STAY WITH 7!

  Back to Win7 was easy, I thought.  But just wait until you try to back up your files.

  Error code #0 x 80041321.

  Windows says that I have no restore point on my computer.

  Forget taskschd.misc... good luck with anything.

  What I really need to reset to factory settings?

  Is there not an update or the quality of the advice of Microsoft for those of us who upgraded to Win10, returned to Win7, and now we're going to have trouble with our computers?

  I'm tired of the error messages.

  Why, oh, why have I improved?  Everything was good with Windows 7.

  You will pay the price for venturing into the land of lala Microsoft without understanding the consequences or what you receive.

  Windows 7 is the gold standard and will be supported by January 2020.

  However, you need to fix.  It is not so difficult.

  You will probably never get Windows 7 running again, until you perform a new installation of Windows 7.

  I recommend a factory restore.  There is a hidden on your hard drive partition (assuming you have the original OEM hard drive) that has a copy exactly what was on your computer when you first started it.

  There is a specific way to get the factory restore to occur, it's to make you special and computer model.  You can find using Google or let me know the age of the make and model of your computer, and I'll try to find you the right page of instructions.

  First of ALL, download your saved data.  Factory restore erases everything.

• Error with HomeScreen

  Hello

  I create TestCreateURI app for testing.

  Here is my code:

  import bb.platform 1.0
  
  import bb.cascades 1.4
  
  Page {
      Container {
          Label {
              // Localized text with the dynamic translation and locale updates support
              text: qsTr("Hello World") + Retranslate.onLocaleOrLanguageChanged
              textStyle.base: SystemDefaults.TextStyles.BigText
          }
          // HomeScreen isn't a visible object so it must be wrapped as an
          // attached object.
          attachedObjects: [
              HomeScreen {
                  id: myHomeScreen
              }
          ]
  
          Button {
              id: testbtn
              text: "Create"
              onClicked: {
                  console.debug("Lala");
                  //app.tao();
                  myHomeScreen.addShortcut("asset:///icon.png", "Research in Motion", "http://www.rim.com");
              }
          }
      }
  }
  

  When I clicked on the button, it generated this error:

  HomeScreen - path ' / accounts/1000/appdata/com.example.TestCreateURI.testDev_stCreateURI4adc540d/app/native/assets/icon.png ' does not exist.

  Please help me to fix it.

  You have a file named "icon.png" in your folder "active"?

  You probably think that
  ' TestCreateURI/icon.png,.
  is the same as
  'TestCreateURI/assets/icon.png '.
  but they are different. To access the icon.png file in your root folder, you must build the path to the file in C++, you will not be able to do only in QML.

  In QML:
  ...
  homescreen.addShortcut (app.rootFolder + "icon.png", "search in...")

  In C++:
  QString rootFolder() {}
  Return "file://" + QDir::currentDir() + "/ app/public/native /";
  }