The Smart TV Toshiba 32L6363DG and WLAN connection problem

Similar Questions

• How can I get my new/old office to connect to the internet? I ran to the implementation of new Internet and network connection wizards, nothing happens.

  LAN and WLAN connections

  My old wired desktop xp died, it was the first computer on my home network. My friend just got a new office and gave me an old. I have a laptop which has windows 7 and is connected wireless. It is still plugged in and works fine.  How can I get my new/old office to connect to the internet? I ran to the implementation of new Internet and network connection wizards, nothing happens. When I go to internet connections, it shows that it is connected, but I can't seem to connect. Help, please!

  Hi ShannonStrong,

  ·         What exactly happens when you try to connect to the network?

  ·         You receive an error message or error code?

  You can follow the steps in the Microsoft Knowledge Base article mentioned below and check.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  You can also see this article:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Note: The article also applies to Windows XP

  Let us know if this information useful.

• I'cant connect. The wheel continues to roll and never connect. Internet works fine.

  I'cant connect. The wheel continues to roll and never connect. Internet works fine.

  If you are still having the same issue, follow the procedure below and check it once.

  N ° 1)

  Temporarily disable anti-virus and firewall.

  Step 2)

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "Automatically detect settings" is the only option you select, the window of properties of LAN so clear.

  Step 3)

  Complete all Adobe processes as creative cloud, CoreSync, AAMUpdater... etc from the Task Manager.

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  It will open the Appdata folder.

  Then navigate to local > Adobe > OOBE. Open the OOBE folder and delete "' Opm.db ' file."

  Once you had deleted Opm.db file, launch Adobe Creative Cloud application and try to connect again.

  Always the same?

  1) go to C:\Windows\System32\drivers\etc and locate the file named Hosts inside the folder etc.

  Copy 2) host of the file to the desktop and open the same with Notepad.

  Check if you can see all Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?

• NB200-10Z - WLan and Lan connection problems

  Hello

  all I bought the NB200 & I'll put up the wireless connection. Everything seemed fine, but now I'm in trouble.
  On the network connections page, it shows the network connection wireless as "not connected".

  On the Network Setup Wizard, it shows the connection of wireless (atheros AR9285 adapter) & the connection to the LAN (Realtek) but says that they are disconnected.

  Any advice on where to go next would be very appreciated. (FYI, the modem is Speedtouch ST585)

  Matt

  Go to this page:
  http://APS2.toshiba-tro.de/WLAN/
  Update the WLan driver.

  I m not a NB200 owner but one of my friends has a NB300 and there was an option in the BIOS which enabled and disabled the Wlan
  Check in BIOS if this option is available in your case too

  Keep in mind that you use the right SSID, encryption right, the right encryption password and disable the MAC on your filtering router.

  Welcome them

• Satellite A300 - 15 c - WLan hangs the simultaneous use of BT and WLan

  Hello

  I bought laptop Toshiba Satellite A300 - 15 c last month.
  I run Wifi and Bluetooth simultaneouly. Connect WiFi broke.
  Then I turn off Bluetooth and it worked perfectly.

  How do I change frequency Bluetooth or why it doesn't simultaneouly with Bluetooth?

  I have laptop of less than 10 metres from the Access Point with 8.5dBi outdoor antenna and the signal is not.
  Another Access Point is 20 meters from the antenna and it works at full speed.
  Why signal is not?

  I have Windows Vista Home Premium with the latest drivers.

  Ales Pospíchal

  Hello

  What do you mean by crash?

  > Other Access Point is 20 meters from the antenna and it works at full speed
  This means you can receive another point of access correctly WiFi signals using BT and the WLan together?
  If this is the case, then it might be a compatibility problem with your another WLan router.

  I m not very well what WLan card you have, but I recommend to update the driver WLan first and the BIOS if available.

• Printer requires an access code to the user instead of windows and password connection?.

  I was see the printers to HP asking (LaserJet M4555 MFP color LaserJet 500 MFP M575 etc.) for access instead of windows and password connection code.

  One thing I noticed, is that when this happens there is a slight change in the EWS page configuration to security-access control >. The device administrator tabe is off, as you can see below ehen what happens

  

  Tried cold reset the printer and restore settings, but it does not work and some thimes it works for awhile but the problem has returned.

  We should not promt instead access code we need to connect normal windows and used password be there originally.

  The current configuration on your screen shows that the method, on the last column in the table header, log by default is set to the Local device. All permissions are also set using the default method ('use default' in the column 'Sign In method').

  In order to use the Windows authentication method, you must configure the sign 'Windows' in the method on the section above:

  

  Then set the default value 'Sign in the method' of the table of authorities 'Windows '.

  Kind regards

  Eduardo_G

• Satellite L450D: Windows 7 and Netgear connection problems

  Hello

  Ive recently bought a Toshiba Satellite L450D but I can't connect to a netgear wireless account...
  It works fine on another laptop and my toshiba can connect to an account of different eircom without problem...

  What is the new Windows 7, which is not compatible with the server or do I have another problem!

  Thank you! :)

  Hello

  What you mean with Netgear wireless account exactly? Do you mean the router Netgear WLAN?

  Normally, you can connect to each WLAN router. It makes no difference which manufacturing, you have the router but factory settings are different, this means that some routers have DHCP and static IP addresses, for example. I think you should check the TCP/IP configuration and update the WLAN driver.

  Check for an update WLAN Portal: http://aps2.toshiba-tro.de/wlan/

  Good luck! :)

• Satellite L100-120 WLAN connectivity problem

  It is very difficult to connect to a wifi network, the activity is very slow between 200-500 bytes sent and received, and often, with excellent signal, I get the message "no or limited connectivity.

  Now I use an external adapter that gives me good connectivity, with 4 giga bytes sent and 23 giga bytes received. I updated the driver, now, I 10.5.1.59 version. He has not much improved. I'm still 6 months warranty, but I have trouble finding a service. I'm in France, Nancy and me told me that I have to pack up and send my laptop for service in another city. I wonder why can't help on the site, because the most likely solution is to replace the adapter.

  Can be worn for several days, it's hardly what I expect my laptop. It's a faulty device on my laptop, that gives me a lot of problem and to solve it, I have to endure more discomfort. I guess it's easier to buy an external device and forget that I already have one on my laptop.

  If someone could give me some advice, I would be very grateful, and if you can suggest a solution that would be really great.

  Hello

  I wonder if you tried to update the BIOS.
  To my knowledge the new BIO 2.0 should solve some problems with the WLan connectivity and performance.
  I recommend trying this.
  The BIOS is located on the site of Toshiba.

  A friend good luck :)

• Toshiba 7 '' tablet PC connection problems

  I just bought a Tablet 7 '' and would put some files on it, but I can't seem to connect to my Windows 7 PC. I use the mini USB port but nothing shows up on the PC or tablet. Can't find a reference to USB connectivity in the settings of anywhere, what I am doing wrong?
  Thanks in advance.

  Hello

  You have a Toshiba thrive?
  As far as I know that the Tablet supports a USB and a micro-USB port.
  The USB port handles USB flash storage devices or devices such as a keyboard, mouse and the micro-USB port must be used to connect the tablet to a computer to transfer files.

• Satellite A105: External HDD USB and IPod connection problems

  Hello

  I have computer laptop toshiba satellite A105, last weekend that I have reinstalled windows on my laptop using the recovery discs, and now I had two problems.

  First problem when I connect my external hard drive, my computer show no icon of this hard drive, but when I check in the management-disk external hard drive is connected to my computer.
  Second problem is my IPod, a similar problem on the hard disk indicates when is connected to my laptop but when I checked in the device under usb controller Manager appears, but with the yellow circle and question marks.

  Could you help me to solve my problem?
  What about the Kings
  Wojtek

  Hello

  Have you tried to update the drivers of USB port?

  You should try this;
  -Disconnect all USB devices the USB ports.
  -Go to the Device Manager and remove all the USB root hub and all USB host controllers.
  -Restart the laptop

  After this procedure, the Windows operating system should recognize and should install the USB ports again. After restarting again you must connect only USB devices and must verify if they will work properly!

• Satellite A300 and wireless connection problems

  Recently, I had to use my recovery disk and restored my laptop to factory settings. Almost everything is back is the way has been, except for a small problem.

  The WiFi does not work. It is on, but when I go to connect to the wireless family network, it tells me to insert a cable.

  My laptop is the Satellite A300 - model psagca.

  I install the drivers of Realtech and still not get the case.

  Thank you in advance.

  Your wireless network is not visible to your laptop satellite?

• Photon: Dropped calls and network connectivity problems

  I bought my Photon August 18 and he was not long for me first to the problems with network connectivity.

  The phone displays signal on the phone, but when you try to call, send text messages or surf the web. Zilch.

  A soft reset works every time. I've had some experience with the issue of the "appeal of ghosts", but had no network connectivity so often that he was too much a problem. Restores the soft 3-4 per day.

  I took the phone to the Sprint store and they told me that my phone verified and were not hardware problems that may be found. I said at the time on the update of the software of MR5 and was anxious to see how the phone after the update.

  I received the update on Wednesday and the phone worked fine. No appeal of ghost, no network connectivity not problems, only dropped the call.

  Now, Friday morning, I lost network connectivity despite seeing the strength of the signal and had to perform a soft reset to regain connectivity. My wife and I bought this phone at the same time. She had many calls interrupted before the update and we both experienced after that update eventhough signal showing on the phone is at least two if not more bars.

  Is this a known issue? Is it going to be/CAN this be corrected by a software update? Is this phone a lemon and he'll remember?

  I LOVE this phone. I don't want to get rid of it, but...

  Seriously. It's a phone! Making calls should be the FIRST thing that is done right.

  Please, someone, Motorola, reassure me that this isn't a lemon and that network problems are going to be fixed. I CAN wait, but I don't want to get stuck with two phones for $200 that need to be pampered just to be usable.

  Thank you

  TC

  Yes, it turns out that be was a buggy phone. Two stores tested Sprint phone for reception of the signal and they said that it spent; but as said the technician in the second store, the tests they take place the phone in ideal conditions.

  The two stores I've visited, said they were ready to replace the phone, but my first visit came just before the MR5 update software while I was willing to wait to see if the update corrects the problem. It didn't, but the replacement of the second store phone works fine with upgrading to MR5 and really no problem.

  I'll go ahead and mark this question as a response, but if you experience the same problems of chance complete loss of all network connectivity (Sprint or otherwise), I recommend getting the phone replaced. It is a bad camera.

  Oh and the technician at the second store mentioned the network problems. It has been a problem for them, but the most telling proof of the issue of network is random dropped calls. So if from time to time, you lose a call under the conditions of good network signal, it's probably not your phone and Sprint. I have almost that many abandoned calls as of late, so it could have been the wrong phone I had that really amplified the problem... or... Sprint has got some of the bugs in our region.

  Thank you for looking in. I hope that your problems are as easy to solve as mine and I hope that you are still within your 30 days so that you get a new replacement.

  Best wishes

  TC

• WiFi for computer laptop HP ENVY 15 and Ethernet connection problem

  Hi, a few months ago, I brought a HP ENVY 15 Notebook PC running windows 8.1. It is connected to my wifi with Ralink RT3290 802.11bgn Wi - Fi adapter. My modem is a Technicolour TG582n 2 Wireless ADSL + with wireless 802.11 b/g/n compatible.

  As soon as I got there I noticed a problem of internet where I would be able to connect to my home WiFi network and get full reception bars but would have a hard time to access Web sites on web browsers such as chrome, mozilla and internet explore pages takes some time to load and eventually reached a page "this webpage is not available" (for chrome). This problem seems to occur only with my home network as it can connect to public wifi and my wifi friends and yet I have many other devices such as laptops and other smartphones connected to my wifi that did not at all have poblems with internet and it just seems to be mine. When I connect via ethernet I get good connection for about 10 minutes and then I was completely cut off. However, I can upload a file via the wifi ok if I can get it to start and I can play a game online well enough but often disconnected after an hour or two.

  I checked for new updates of pilot, but they seem to be up to date and im do not manually downloading and installing one on the hp site but I tried (I did probably wrong). I ran the diagnostic function, but it cannot detect all problems. I looked around the internet as well, but still havn't found a solution.

  Also I got the laptop sent back and received a new but the same problem persisted and as I walked through the process of the person I was talking to a admitted that I had a problem like they remote limited from my laptop for a little for the access problem.

  Please help, I've had this problem for a month or two now and is really becoming a problem since I use my laptop computer for purposes of requiring home internet work.

  Thanks in advance and I hope you guys can help!

  Hi @Eugene5 ,

  Welcome to the HP Forums!

  It's a great place to find answers and information.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have a problem with your connection Wireless at home. You are able to connect with full bars but are unable to access the web.   When you're lucky hours just access the Web, you can make a download if you get started in time or play games online for one or two before again declining. You ran the diagnostic function, but no problems were. You had the phone replaced for the same issue, but the replacement has the same question.

  You know your network is an 802.11 G or 802.11n.   How do I know if my WiFi connects using 802.11n (as superuser)

  Please check this setting.

  1. Open the Device Manager
  2. Click the network adapters to expand the list
  3. Right click on the Ethernet connection, and choose Properties
  4. Click the power management tab
  5. "" Please check that ' allow the computer to turn off this device to save power "is not checked.
  6. Repeat this process for all types of listed under network adapters.

  .

  What does your wireless card is supported?

  Here's a link for How to fix little or no Wi-Fi connectivity issues in Windows 8(of fixedbyvonnie) to help you.

  If you need further assistance. Please provide your exact model of HP laptop and your operating system.

  How can I find my model number or product number?

  Good luck!

• 6525 - resettlement and internet connection problems Deskjet

  Hello

  yesterday I managed to install my new printer hp deskjet 6520 (5) on my HP Pro 3520 (AiO) with win 7 - using a wi - fi connection. Then, I also installed the printer on my laptop (sony vaio) - also use wifi. The two communicated yesterday with printer. But I have not tried to use brought down PC after install portable printer

  Nevertheless, today HP 3520 Pro could not have communicated with printer. Software repeatedly said the printer cannot be connected to the PC (while printing through the laptop was ok...). No miracle has helped so I decided to uninstall and reinstall the printer.

  I've uninstalled it successfully but when I try to use the hp guide software installation (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-122330-1&cc=cz&dlc=cs&lc=cs... he just said initially that I am not connected to the internet... Although I have no problem with the internet connection (I even tried connecting cable...).

  Help, please... I do not know how to do this

  Thanks in advance

  It is now resolved... I do not understand this, but when I turned off my laptop, the printer begins to communicate with PC...

  If HP - is there a reason why cell phone (with the installed printer) refuse the communication between the PC (HP Pro 3520) and hp printer deskjet 6525?

• How to question dignosis between P6 web and database connection problem.

  Hi all

  Initially we have access to P6 via a URl server http://ip: 7001 / p6

  We have migrated our server to the new support. now above the URL does not work.

  but instead of the IP if I get p6 URL, server name opens http://servername:7001 / p6

  But I am not able to connect. (I'm not able to extend the button Advanced also to see the name of the database).

  I think that P6 does not connect to the database. (Our database is available on another machine and I can ping this machine server request P6).

  Please let me know, how can I diagnose this problem of connectivity.

  
  

  On the server where P6 is installed, run the dbconfigpv.sh/cmd again and reconfigure the database connection. Also, run adminpv.sh/cmd. Login with privuser and check the connection to the base there. Test to verify that it is able to connect to the database. If you change any setting then restart weblogic server for the change to take into account.