lang change to printer 3545

Similar Questions

• print size too large after changing the print cartridge

  Sounds like an easy fix should be up there, but I'm not super computer savvy... after that we changed the print cartridge for the first time with this printer (and who knows what may happen after when my husband tried to fix it), the font of printing is too large AND prints a blank page of paper before the actual page prints with a font that is too large to fit properly on paper 8.5 x 11 inches. Normally, there are all the parameters that must be set after simply change an ink cartridge? Help!

  Hi Wendy,.

  You can also check: http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=au&lang=en&product=4089468&

  I hope this helps.

• HP Officejet 4500 crashes when you click Properties to change the print quality

  There is no answer to a minute when I want to change my print job properties after clicking on the properties button. I haven't changed anything concerned with the printer, what the problem and how can I solve it?

  beckybeib,

  Also, make sure that you do NOT connect the USB cable until the software tells you to connect, when you reinstall the software.

• HP 2050 j510 series change the print quality options all greyed out help? Project custom quality etc.

  Hi I just installed this printer on an operating system of Windows 7 32 bit, but on the quality of implementation page/impression of two tabs only page layout can be changed all options are greyed out it is deliberate to stop printing in draft print quality or quality options above that this has no sense here that I hadn't bought this printer now as she gobbles up ink and I can't change the print quality at first, I was disappointed that now I would never never buy another printer HP unless HP or someone can help you. Printer is brand new, right out of the box, but HP only support expensive paid as it has been manufactured since more than a year! How bad are only only he registered today for the first time!  Thumbs down for HP!

  Hi charlieelston,

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print using this driver for the Deskjet 3050 printer. I would like to know if you have the same problem?

• Is it possible to change the printer function to accommodate the thicker paper

  Need to print on thicker card, but the paper is a little too think to roll smoothly through the printer.

  Anyone know if there is a way to change the printing options to solve this problem?

  This would be a limitation of the printer, so I suggest to contact the printer manufacturer for advice. My suspicion is that it will take another printer.

  -steve

• How can I change the print in grayscale settings?

  How can I change the printer (3050 J611) of colour printing for printing in grayscale print fast by default?

  soaprhm wrote:

  How can I change the printer (3050 J611) of colour printing for printing in grayscale print fast by default?

  What operating system?  For Windows 7, you would go to start, devices and printers, right click on the HP Deskjet 3050, printing preferences, select the paper/quality tab and some Plain paper media quick project, apply, then click on the Advanced tab and under the characteristics of the printer, select printing in levels of gray and black ink only, apply, OK.

  

• Can I hide or change the print window not pop up when printing?

  Original title: hide or print shown window?

  Can I hide or change the print window not pop up when printing? I want to still print but just to hide so it does not appear.
  Is it still possible?
  Thanks for all help

  Hi rustylzard,

  It is not possible to hide or change the print window when you try to print something.

  Hope the helps of information.

• Impossible to change my printer from offline mode online

  Original title: get my printer online

  My printer has suddenly gone 'offline' and I can't do it online.  I ran the installer for my home network on it again, and he says it connected successfully, but it is always showing that it is in offline mode.  What should I do?

  Tahnya, salvation

  Thanks for posting your question in the community of Microsoft Windows. I understand that you have printer problem be disconnected. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. What is the brand and model of the printer?

  2. you receive an error code or message?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the steps below and the links to verify the question:

  Replace a printer offline online mode:

  To resolve this problem, you need to change your printer settings of the offline online.

  a. open the start menu and click on the "devices and printers". This will open a window with a list of the printers currently installed on your computer.

  b. double-click the icon of the printer that you want to change online. The status of the printer appears in the form "printer: Ready" or "printer: offline.".

  c. click on "printer: offline" and the menu of the printer. Click on "Printer" in the menu bar and uncheck "Use printer offline." This action will change the printer from offline to online mode.

  For reference:

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Troubleshoot network printer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• After that change my printer cartridge 5530 1 want wants to realign and analyze whenever it is turned on

  After that change my printer cartridge 5530 1 want wants to realign and analyze whenever it is turned on.  When I do that, it says "Scan not detcted.»  After a 2nd scan, it attaches to the default settings.  Then I can use the printer.  Is there a way to disable alignment?

  You can try to reset the printer.  He could clearly your question.

  Measures

  1. Press the power button () to activate the product.

• Some incoming e-mails are too small and cannot be read during printing. How can I change before printing?

  some incoming e-mails are too small and cannot be read during printing. How can I change before printing.  I did once, but forgot the steps. Thank you.

  original title: the font size of the mail received

  You use Windows Mail? It uses the same print as THE engine. For print size: IE | View | Text size | Carry out the adjustment.

• I can't change the printing on PSC2175 preferences. When I click on Preferences nothing happens.

  I can't change the printing on my HP PSC2175 preferences. When I click on it, a window will appear, and then disappers instantly. May not print correctly (using Microsoft Office 2010) Word documents or PDF documents correctly. It can print text perfectly, but diagrams, text boxes and grids do not print, and other times it prints only part of it.  I am using Windows 7 32 bit.  It started after the upgrade to Vista.

  Hello

  Have you tried to uninstall and reinstall your driver located within the Windows 7 operating system?  You probably know that HP did not create a downloadable driver for Windows 7.  I would try uninstalling and then reinstalling the driver.

• How to open the maintenance Manager to change the printer ink

  How to open the maintenance Manager to change the printer ink

  Do you mean physically change the ink cartridge?

  I would check with the manual that came with your printer.

• What product Adobe can create a PDF file that can not be changed or printed by the recipient?

  What product Adobe can create a PDF file that can not be changed or printed by the recipient?

  Hi quoman,

  Looks like you're wondering how to add security to a PDF file. You will need Acrobat Pro or Standard to do. If you do not have Acrobat, you can try it free for 30 days. See www.adobe.com/products/acrobat.html for more information.

  Best,

  Sara

• Change the printing WillPrint settings

  I see that the WillPrint event is raised after the user dismisses the dialog box print. I have a PDF file where I want to only allow them to print page 1. Can I use the WillPrint event and change the print settings as well as the first page is printed? Thank you very much.

  Rick

  As try67 says, the event does not work like that.

  WillPrint is exactly like that - he is fired when the user presses the Print button in the print dialog box, so at this time the printout will be no matter what you do with the event. and they have already made their choice on what is happening out of the paper tray. If JavaScript could intercept these choices it caused no end of problems.

• Cannot change the print settings

  I have a new printer, an Epson XP 430. My previous printer was also an Epson. With my old printer, when I chose to print (for a document, web page, etc.) the dialog always had an option to choose, black and white. I also could add to the presets and edit presets.

  With this printer, I can see the presets, but I can't make changes. When I click on view Presets, it is not an option for adding a new preset as it was with my old printer and remove and duplicate boxes are grayed out.

  I guess that this is due to the printer, not OS X, as I noticed the difference when I started using the new printer. Am I missing something somewhere? I rarely print in color, so I would have a preset that specifies black & white.

  Thank you.

  Sheri

  Since you have a new printer, you can create new presets. This is done through the printer with the selected printer dialog box, not through the page view Presets. When you select this option to print do the settings that you want to create a preset for and then click on the drop down preset menu. Select "Save current settings as preset" and enter a name for the new preset.