Language setting

Similar Questions

• How to change the language setting in Microsoft word to generate a list of references?

  How to change the language setting in Microsoft word to generate a list of references?

  I use a Mac with the (traditional) Chinese language setting, and I need the reference generatinga list for my document in English!

  If you don't get an answer here, try the forums devoted entirely to problems with MS applications:

  http://answers.Microsoft.com/en-us/Mac/forum/MacWord

• How can I change the language setting for 4500 WANT after the initial Setup

  The language setting for the ENVY 4500 e-all-in-one printer has been mistakenly or inadvertently put in CHINESE (not sure how this can happen).  Now, the display is incomprehensible, so I can not understand how to change the language to ENGLISH.  Is there a simple way to change the language or reset the printer by default so that I can fix this problem?

  Thank you.

  Hi scfessler,

  Welcome to the HP Forums.

  I see you have a problem with the printer displayed in another language.

  On the front screen of the printer, press the top left button ( Home button).  Once on the home screen, press the arrow UP 2 times, this brings you to the preferences Menu, press OK.  Once in the Preferences menu, the first highlighted area is the enacted area please just press OK again.  The first language highlight is English, please press OK and then Yes to make the changes.

  If you still have questions, please let me know.

  Thanks for your time.

  See you soon,.

• ripping a cd... where change language set when ripping a cd

  original title: rip a cd

  where can I change language set when ripping a cd. my cd of doors is heartbreaking in a foreign language

  Hello

  1. What is the operating system installed on your computer?

  2. what software you use to rip the CD?

  3. don't you make changes to the computer before the show?

  Please provide us with more information on this issue to help you best.

  See also the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

• Help with the language setting

  I've fumbled while trying to set up my new Clip + and accidentally the language selected Arabic-now I can't change it to English because I can't read the poster! I tried to reset the player by pressing the power button, but when I turned it back on, he was always in Arabic mode.  I can do, or should I learn to read Arabic?  Thanks for any help!

  First, turn off the drive, then turn it back on.

  To access the language setting, press the Home button, which should return you to the main menu.  Highlight the settings icon, then press select.  Press the down button three times to access the system settings option.  It is the last option in this submenu.  Press select.

  Press the down button three times again, and it's the language setting.  Press select, and English is the first choice in this submenu.

• Check the language set in the device

  Hello

  I want to get the language set by the user in the settings for my application screen. If he put the English language, I have to check and display the HTML in the browser field. To do this, I have tried in the way below:

  if(locale.getDefaultForSystem == locale.) LOCALE_en)

  {

  Display the content here

  }

  But it does not work. I have to check for six languages such as English, French, Italian, Spanish, German and Japanese.

  Help, please.

  I found the solution...

  the code below does stuff:

  If (locale.getDefaultForSystem () .getLanguage ().equalsIgnoreCase("en"))
  {
  Logger.out ("CustomStore", "Local English");
  strUrl = "local:///OTPhelp_en.html";
  }

• Hoping to change from English into Chinese language. By Edition-preferences-language setting, but it does not work.

  Simplified Chinese WIN 7,64;

  Install acrobat DC;

  but the system installs the English version by default,

  Hoping to change from English into Chinese language.

  By Edition-preferences-language setting, but it does not work.

  Thanks for the help!

  Cloud of swap language http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html

• Spellcheck language set by DEFAULT

  Running 13.04 Ubuntu, firefox can only highlight each word red whenever I type in a text box, because the superior to RIGHTCLICK entry > > LANGUAGES is "French". The other read, in order, "French (Belgium)', 'English (United Kingdom)', 'French (Luxembourg)', 'English (United States)', 'French (Switzerland)", "French (France)", "English (South Africa)," "French (Canada)", "Persian", "Persian (Iran)", "English (Australia). Now, I do not deny that I can went on a fine madness long after discovering the spelling check of the new languages. Whatever it is, I want to be rid of all but "English (United States)", "Persian (Iran)" and "French (France)", in that order, with "English (United States)" as a default.

  Unfortunately, the first ("French") option is the default value, which means that each textbox I go, no matter what I chose in the previous text box, the language of the spell checker is reset to French. There is no firefox addons that suggests a change of language, other than maybe Ubuntu Firefox changes, integration Ubuntu unity Desktop Integration online, accounts or Web sites of the unit as I understand would change the language of the spell checker by default, these plugins or languages. Subject: Watch spellchecker.dictionary like en_US config set by user and EDIT > > PREFERENCES > > CONTENT > > present LANGUAGES, "in order of preference", in the us, FR, fa and ar; Although I don't think that the latter is related to my problem, since Web pages in the correct language; It's just the spell check.

  Hello helasraizam, it should be possible to delete some installed spellchecker Ceres of topic: addons under "dictionaries".

  I do not know how to influence the order of the remaining entries however & would have recommended setting spellchecker.dictionary manually. If this did not help, but you can also erase the part "site preferences" in your history, since the preferred spell checker language can be stored on a site-by-site basis: remove the navigation, search and download history on Firefox

• Why the spell checking language setting does not match prefs.js?

  I only have one profile in ~/.mozilla/firefox (default profile), and in prefs.js contains

  user_pref ("spellchecker.dictionary", "en_US");

  (which is correct). Despite this, about: config tells me that the language is en_AU, and this is what is used by the spell checker. I can't change to en_US in the context menu in a text field and the sticks of change until I close FF, but the next time I start FF we return to Australia despite the adjustment in prefs.js. Before or after you change the synchronization setting makes no difference. Running in safe mode makes no difference.

  The value of spellchecker.dictionary must be "en-US" for the US dictionary and do not have an underscore character.

  • user_pref ("spellchecker.dictionary", "en-US");

  You have a user.js file in the profile folder, which can override the last setting recorded in prefs.js?

• Laser Jet Pro M201dw: Language setting

  Just bought this printer and accidentally set the wrong language. I tried to unplug and let it sit, but it always starts in a foreign language. How to do a hard reset on this printer?

  Thank you

  Tricia

  Hi Tricia,

  Given that this does not work, please try this - a deep system reset.

  1. for a 2-line display - with the device off, simultaneously press and hold the [←] and [Cancel] buttons
  2. For touch screens - the unit is turned off, press and hold the lower left quadrant of the touchscreen (put the thumb on the lower left corner of the area lighter and hold it there until the PSI message (see below))
  3. Switch on the device.
  4. When you see the message "storage Permanent init", release the buttons or the pressure. When you reset the printer is finished, the unit returns to the ready state. -ask for language

  I hope it works for you.  Dovid

• printer while an English menu language setting

  In NL, I install the software HP (ao. HP Solution Center) a reinstallation of windows7. Whatever I do, this brilliant software wants to install while duthc, whereas I need to have the menu etc. in ENGLISH.

  Who can help to get it fixed?
  (Currently all the software uninstalled because it is useless to duthc).

  Hello

  Sorry, this does not solve the problem.

  But I found out that the language is driven by the regional Setttings to my pc itself. Once I set the regional settings > location = USA (instead of the Netherlands), I get the English installation menu, then the English version of the HP Solution Center software.

  So now resolved.

• Language setting of the Canada

  In fact, it is a problem that goes all the way back to Windows 95, but it is still the case in Windows 7.

  I am Canadian and lived in Canada for more than 30 years; I'm still part of the year. So, naturally, I chose English (Canada) as my language when you install a new installation. I also chose the standard American keyboard layout . I pointed out that, because it's going to be important.

  Windows still INSISTS to interpret this as a Canadian French keyboard layout. It would be stupid, even if it was just the default. As I said, I lived in Canada for more than 30 years. During this time, I saw a Canadian-french keyboard. The overwhelming majority of English-speaking Canadians do not use a Canadian-french keyboard, we use a standard American keyboard layout. Windows CE uses however not only as the default value but does not include my explicit entry to do, it's not stupid.

  When I go to my language settings, it says I use a standard American keyboard layout. Yet when I try to type a question mark I E, when I try to do an arobas I get ', and so on. " Notice how the apostrophe in the word "there" seems to be wrong when I type - it's another symptom of the problem. I even removed the French Canadians and the list entirely - multilingual keyboard options it does not always help.

  How can I fix this (it should be a question mark here, but guess what, I can not type a because of your stupid OS!). I mainly write for a living and I need of the ability to type the basic punctuation!

  (I've corrected this before but don't remember how and even if I could there is no guarantee that the same solution would work now, which is a new OS and all.) Moreover, I wouldn't have to, you are the most design software buggy, not me.)

  And most importantly, When you will fix your bloody operating system . This has been a problem for more than 15 years.

  Keyboard layouts in Windows Vista / Windows 7
  What to watch:
  • When Windows is installed, for some regions, that it puts in place a multiple for one default language keyboard layouts
  • Each open application has its own standard keyboard layout
  • If you have several layouts, set up you can see who did that if you click the icon for the keyboard on the taskbar
  • Pressing CTRL-SHIFT will change between layouts without any visible indication
  • Keyboard layouts are set up in the Control Panel area and language , not the keyboard control panel
  • Deleting a keyboard layout in the Control Panel will not open applications that already have this selected provision affect
  • Remove all keyboards except one in the Control Panel will make it impossible to change keyboard layouts even if some open applications may have other selected layouts
  To go to a single keyboard layout in Windows 7:
  1. Save your work and close all applications, because the traps above make very confusing if you do not immediately restart after changing the settings.
  2. Go to the control panel of language and region (you can easily find it by searching in the box in the start menu)
  3. Click the keyboards and languages tab
  4. Click Change keyboards. This will bring up the "Text Services and input languages" dialog box
  5. Go through each additional provisions you don't want in the box "Installed Services", by selecting them and clicking on the button Delete, until you end up with just the layout you want.
  6. Click OK in the text Services and input languages dialog box
  7. Click OK in the region and language control panel.
  8. If you want to avoid problems with open applications stuck in some other keyboard layout, restart Windows.

  Furthermore, in my experience, when you click on that English (Canada) during a fresh Windows 7 install, it sets up a single language (English) with several keyboard layouts (American English, French of Canada and Canadian multilingual Standard) and sets the default for U.S. English keyboard layout.

  P.S. I'll leave my thoughts on the causes and consequences of this "feature" for another forum.

• How to change the language setting in another language to the English language in hplaserjet1213nf all in one

  How do I change the setting other language to the English language in hplaserjet1213nf while a front pannel language printer

  Please explain step by step

  kindly answer me pl.

• change the language setting

  Hello.

  I want my language to English, but it detects the language of the operating system which is Japanese.

  what I would do. (Both for the creative cloud and Dreamweaver)

  Thank you

  You should be able to select the language in the creative cloud desktop application and have this default language when downloading programs through it.

  I've never had to do it myself, but you should be able to uninstall the applications that you got with the Japanese and reinstall after having changed the setting to English in the CC desktop application.

  In the CC Office application, click the gear on the top icon on the right and choose Preferences

  You should get a screen with a general tab on the left and creative cloud right
  Click creative cloud on the right

  Click on Apps (left tab)
  Under App language (first drop), choose the desired version of English

  Right-click on the icon arrow left in the upper corner to exit the preferences

  Click the applications tab and download your software

• vCAC 6.1 - the default display language setting to English

  Quick question - is possible to set the default language of the vCAC portal of English for all users, regardless of which language is preferred in their browser?

  I couldn't find the setting in the portal itself.

  After following the advice of support for editing work, the registry key on the Server Web IaaS HKEY_USERS->. By DEFAULT-> International-> sShortDate need to be set on dd/mm/yyyy

  Edition works now for of and en_us defined as languages in the browser. This is the current configuration:

  -of (German) as a language under firefox

  -value of registry key on the Server Web IaaS sShortDate: dd/mm/yyyy

  -IaaS locale of the web server:

  Format: Germany

  Current location: Germany