laptop HP 2000: friends, I have laptop hp 2000. When I go to install windows xp on it then BSOD takes place.

Similar Questions

• Pavilion 15-p108ne: my computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  My computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  Hello:

  You should be able to use the W7 x 64 drivers and software of p000-15 t on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174371

• Installed Windows XP edition and then tried to turn on but got a screen saver and a line saying that I have to go to Microsoft to activate.

  Installed windows xp edition and then tried to turn on but got a screen saver and a line saying that I have to go to Microsoft to activate... Impossible to get anything on the screen to get the net... HELPPPPPPPP and yes I'm on my laptop on the net while

  original title: need help...

  Hello

  You can check this link:
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
   
   
  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer
  
  http://support.Microsoft.com/kb/312295
   
   

• I'll have to turn my computer on and off for windows at startup and then it stops a lot

  I'll have to trun my computer on and off for window at startup and then it stops a lot

  Hello

  Is there an error message? If so, what would you say? If this isn't the case, then you probably have a stop initiated by the hardware to prevent overheating damage to the system. If this is the case, can help clear the vents and intake fans / exhaust so that clean the dust bunnies (desktop systems). Also make sure that the CPU cooler is not clogged and that all fans are working properly. With laptops, a cooling pad can help.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

  Original title: could not start the Service "Windows Defender" (WINDEFEND)

  When you try to install Windows Defender, I get an error message that

  "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

  How can I check which privileges I have and I need?

  I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

  Help please

  Hello

  This error message is because you have Norton installed on the computer. See the for more information section below.
  http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

  Let's try the steps and check them off below if it helps.

  Step 1: You can try to uninstall Norton and then check if the problem persists.
  Note: Reinstall Norton after verification.
  Reference: http://support.microsoft.com/kb/307895

  Step 2: Change the registry value and check.

  a. Click Start, type regedit.exe and press ENTER.
  b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
  c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
  d. enter 0, under value data, and click on the OK button.
  e. close the registry editor.
  f. restart the computer.

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  Bruce,

  Do you remember if you wanted to do a new installation or had you partitioned your hard drive to install it in a dual boot with Vista?

  If you do not have a BONE now it sounds lik evous was the first choice that clears your current installation.

  You need to reinstall Vista from your original media to recover your system if this is the case.

  Unfortunately, if this is what you choose, you have lost all the data that was on your hard drive as well.

  Sorry to be the bearer of bad new possible.

  Rich

• Win 7 thinks that I have a 32-bit system when I try to install the 64-bit and he thinks I have the 64 bit when I try to install the 32-bit version

  Win 7 thinks that I have a 32-bit system when I try to install the 64-bit and he thinks I have the 64 bit when I try to install the 32-bit version
  I know I am running vista 64-bit, it states that in the system properties

  I have a HP Pavilion A6700, when I went to upgrade to Vista 64 bit to win7 64-bit (win7) said I can't upgrade an OS to a 64 bit one, so I tried the other way and tried to install the 32-bit 32-bit version, and then I got the msg, you cannot pass an OS 64-bit for a
  32 bit one, I looked in the system properties and it is running vista 64-bit
  Other than a clean install what can I do to improve?
  and if I do a clean install which are the files I need backup so I don't lose my data?

  Make sure you have the latest Service Pack for Windows Vista installed. Which edition of Windows Vista 64-bit you're running and what edition of Windows 7 you are trying to upgrade to?

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.

  Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

  Also make sure that your BIOS is up to date. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• I have a Sony Vaio. After that I installed Windows 7, the computer does nor recognize the SD card reader.

  I have a Sony Vaio. After that I installed Windows 7, the computer does nor recognize the SD card reader. Someone know whey and how to fix it? Thank you

  Run Windows Update - it may install drivers that does not get installed on Windows 7 home.

  If this does not help, look for Windows 7 drivers for this device on the Sony web site.

• I just bought the DC Pro Acrobat full of desktop software only.  Have downloaded fine, but when I go to install the download, it is for me an "access violation at address 00000000. read of address 00000000 ". Can someone please?  Thank you!

  I just bought the DC Pro Acrobat full of desktop software only.  Have downloaded fine, but when I go to install the download, it is for me an "access violation at address 00000000. read of address 00000000 ". Can someone please?  Thank you!

  Hi Rob,

  What is happening in Mode safe? If you can install it in Mode safe mode then delete all entries in startup via msconfig as this could conflict with the program.

  If this does not work, saving all the data of your administrator account, you can delete the account and recreate it.

  Kind regards

  Rave

• Hi, I am from india.i Riou bought a laptop with linux and I wanted to install windows 7. is this possible? If Yes, then HOW?

  I recently bought a loptop computer notebook Acer Gateway for NE56R in India, in which linux is preinstalled. now, I want to have windows installed too, either by installing windows symaltaniously with linux or uninstall linux and install windows.

  in both cases, I need to buy windows OS.

  Where can I purchase and none to take care

  your response will be appreciated

  Thank you

  Riou

  Hey riri,.

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  According to the description, you have purchased a new laptop with Linux installed on it and I wanted to install Windows 7. To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

  You want to install Windows 7 in dual boot with Linux or clean install Windows 7?

  In case you want to uninstall Linux and I want to just install Windows 7, then you can follow this article.

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

   

  Note: All data on the Linux partition will be deleted if you perform a clean installation of Windows 7. We recommend that you backup before formatting or installing Windows.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• My laptop was stolen and I want to install windows 7 original in my new laptop

  My laptop was stolen and I want to install the windows 7 original (which I had installed in my stolen laptop) in my new laptop, but it is not preinstalled (I bought the computer laptop and windows separately, so I still have the CD and serial number)

  Can I block windows in my old laptop and then install it in my new laptop? How do I block it? Or is it possible to use it in my new laptop?
  Thank you.

  No way at all if it came pre-installed. He stays with the computer on which it was first installed...

• the dvd of my laptop always make sounds when I try to install windows

  Hello

  my computer laptop dvd there are always sounds when I try to install the OS.

  What can be the problem?

  There is no other problems

  Johan

  This would mean that the DVD drive is broken.  The software cannot cause a DVD player make sounds.

• When I try to install Windows XP Professional on my laptop, I get a blue screen that says "error(C=0000135) found dll gdi32not.

  install windws xp profesional sp3 on my loptop and installing installation opens blue skreen and dll error (C = 0000135) gdi32not faund I can't solve this problem

  original title: I install windws xp profesional sp3 on my loptop and installing installation opens blue skreen and dll error (C = 0000135) gdi32not faund I can't solve this problem

  Hi Vytautassvitojus,

  ·         The computer have any OS installed?

  ·         Are you able to boot to the desktop?

  If you are not able to boot to the desktop and then remove the external devices except the keyboard and mouse, perform a chkdsk from the recovery console and then try to install Windows.

  To run chkdsk from the Windows Recovery console. You can check the links for a description of the Windows XP Recovery Console

  http://support.Microsoft.com/kb/314058

  Important:  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

  I hope this helps.

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• I have Vista Home premium and you want to install Windows Defender, but however get the 08x800106ba error message.

  I have Vista Home Premium sp2 and you want to install Windows Defender, but however Gets the 08x800106ba error message.

  Where should I go from here

  Hello

  You cannot install Defender in Vista; It is already part of the Vista operating system.

  Read about Defender:

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.