Laptop HP Pavillion 15-p051u: HP Recovery Manager should be able to change the computer creating media?
I'm doing the original backup set of DVDs for a laptop HP Pavillion (15-p051us) 15. Due to an error, I'm afraid to continue.
I got to speak with a HP tech person, who helped me to pass the second record to DVD. now, I'm trying to start the burning of the third DVD of backup recovery. When I click on the button to launch the "HP Media creation" I get interrupted with a window which shows:
***********************************************
* User account control *.
***********************************************
* *
* Want to allow the following program *.
* to make changes to this computer? *
***********************************************
* Program name: HP Recovery Manager *.
* Verified Publisher: Hewlett Packard Company *.
* Original folder: hard drive on this computer *.
Program location: "C:\Program Files\ (x 86)."
* Hewliett-Packard HP Recovery Manager\ *.
* rebecca.exe"\CRM *
***********************************************
* Yes No *
***********************************************
I obviously don't want to change the program to backup for me when I'm not finished to make the backup. (As I've noted, two DVD's burned and verified. Four still needed.) But when I click on the button 'No' to say "don't edit my computer now until I finished the last four DVD" disappears from the user account control window and the creation of HP recovery media is not engaged. My first two questions are (1) why my computer wants to interrupt the creation of my 6 DVD recovery until the work is done? (2) it would be safe for me to click on the 'Yes' button or what may cause a fatal error in the backup process? In a note, I would like to report that the person HP with whom I spoke on the phone mentioned the fact that the error can be caused by lower DVD media. To counter this notice I tried three DVD good nine successive State. I used more than a dozen DVDs of this package on another computer. With these, he had no problem with registration, verification or later to read these DVD. If my guess is that it is unlikely three of them failing in the HP computer. I don't think that's the problem. I read through 60 first found elements that were identified when I did a search on the website of HP using the key phrase 'Recovery Manager change'. This has proved a total of 7499 possible Articles, but I looked through 60 without success.
Answer Yes to user account control. This is the irritating feature of Windows that assume at all times that you don't know what you're doing. HP Recovery is harmless and should have access to the files on hard drive.
For example, you could get the same question when you try to install the software for a printer, etc. and would answer Yes - you would answer no if a piece of malware slipped on your system and UAC taken he's trying to make changes and pointed out.
Tags: Notebooks
Similar Questions
-
I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?
Hello
Please check the content below, you may find useful.
Please refer to the URL: Documentation VMware Site Recovery Manager for more detailed instructions.
Important
Check that there is no cleanup operation pending on recovery plans and there is no problem of configuration for the virtual machines that protects the Site Recovery Manager.
1 all the recovery plans are in ready state.
2 the protection status of all protection groups is OK.
3 the status of the protection of all the individual virtual machines in the protection groups is OK.
4 the recovery of all groups of protection status is ready.
5. If you have configured the advanced settings in the existing installation, note settings you configured before the upgrade.
6 the vCenter local and remote server instances must be running when you upgrade the Site Recovery Manager.
7 upgrade all components Server vCenter Site Recovery Manager on a site until you upgrade vCenter Server and Site Recovery Manager on the other site.
8 download the setup of Site Recovery Manager file in a folder on the machines to be upgraded the Site Recovery Manager.
9 make sure no other facilities-\no updates windows restarts done shoud
Procedure:
1. connect to the machine on the protected site on which you have installed the Site Recovery Manager.
2. backup the database of Site Recovery Manager by using the tools that offers the database software.
3. (optional) If you upgrade of Site Recovery Manager 5.0.x, create a 64-bit DSN.
4 upgrade the instance of vCenter Site Recovery Manager server that connects to vCenter Server 5.5.
If you upgrade a vCenter Server and Site Recovery Manager 4.1.x, you upgrade the instances of vCenter Server and Site Recovery Manager server in the correct sequence until you can upgrade to Site Recovery Manager 5.5.
a upgrade vCenter Server 4.1.x to 5.0.x server.
b Update Site Recovery Manager of 4.1.x to 5.0.x.
c upgrade server vCenter Server 5.0.x to 5.5.
Please let me know if it helped you or not.
Thank you.
-
Laptop HP 15 t-J000 - HP Recovery Manager question
Hi guys,.
I have what should be a simple enough question. The laptop is as above - I am on Windows 8.1.
My computer people at school asked me to reinstall windows 8 on my computer. It seems that the best way to do it is through HP Recovery Manager. I have the split of 1 TB drive into two partitions - partition (drive C) system and a partition of a data (drive D). My question is this: Recovery Manager of HP software is to reformat the whole disc or only the system partition (i.e., drive C)?
If I need to move the data from the drive to complete the resettlement, I can, but I'd much rather not.
Thank you!
Please see performing a recovery of HP (Windows 8) system;
- System Recovery: This option reformats the system disk (usually C, reinstall the original operating system and reinstalls all the original hardware and software drivers.)
-
Recovery Manager is telling abled
I tried to restore my HP Pavilion to original factory but when you open the Recovery Manager; the system recovery box is disabled?
The only thing I have ever done on the drive is partition into 2 parts to keep my staff separate files in OS system files. When you look at the Recovery Manager disks Windows drive is healthy and intact. If my additional partition is initially removing problem would make the system recovery? Also, is there a way to copy the file to a flash drive recovery? I noticed another small partition labled HP tools, do not know how to access.
You need to remove the extra partition and convert to Basic.Converting back to the base can be done in two ways - either inside Windows, or by booting from a disk. The free version of Partition Wizard 4.2 to do this. Is not a later version because they have disabled the free verson function.
http://www.SevenForums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
-
My Z210 accompanies stripped Bay RAID-0, which currently consists of 2 x 1 TB HDD where the OS partition. I want to change that in RAID-1 mirror, but as the application of TSRI does no such RAID level migration, I thought I would try another approach.
As a solution, I'd do a backup using the Windows backup and restore application. Then, I would change the table using the Boot ROM TSRI before restoring the backup to this new array. But obviously backup 1.9 TB in a table of 932GB will not
So, to make a backup, I firstly disabled 'System Protection' and the file 'Page '. This allowed me to reduce the OS partition to about 50 GB using disk management. Then I re - activate 'System Protection' and the 'Page file' before making the backup and the creation of a system recovery disk. This resulted in a backup of 35 GB that I stocked up on a USB external drive. And now a backup of 35 GB can fit on my reconfigured 932GB RAID - 1 mirror
As such, I cold booted my system and during the boot process, I pressed CTRL-I to get the State of mind RAID Intel Boot ROM. you, CTRL-I've worked only if I started cold and the HP USB keyboard directly connected the first USB slot at the back of the system. The first USB slot is at the top left when you look at the back with the portrait of the tower. Connect the HP USB keyboard in USB port or in the hub of my Dell monitor does not allow me to access the ROM to Boot Intel RAID!
HP should really study this fault
In any case, when I could access the Intel RAID Boot ROM, I deleted the RAID-0 stripped existing and created a new RAID-1 mirror. Obviously, the process is destructive and wipe the BONES of the table but that's what my backup was to
Then I started on the Windows system recovery disk, plugged the USB external drive and proceeded to recover my system.
Everything worked as expected with the operating system partition uses about 50 GB. A simple trip to disk management enabled me to extend the volume to occupy the space allocated, as presented by the RAID-1 array. As such, I find myself with about 932 GB partition that appear in the windows disk management tool. After a check disk and reboot (which fixed some minor issues) all seemed well.
But no, everything was fine
Well that ROM boot RAID Intel sees that a mirror RAID-1 about 932 GB and the operating system sees a partition about 932 GB, both as expected, demand for Intel RST in windows States the following:
I don't seem to have indication of what type of table, it is, an options to change the name of the table or an option to check the integrity of the array through the TSRI application in windows. If something is screwed
But after the update for the application of iRST version 10.6.0.1002 Intel (the newest HP of) version 11.2.0.1006 (version Intel got very practice), the question seems to correct itself. Now the RAID, Windows boot ROM and the request of TSRI in Windows all agree that the table is indeed a mirror RAID-1 932 GB.
I don't know what caused the problem, if it's related to something that was wrong with the process that I used, if she is simply resolved by reinstalling driver, or if this is a fix for a known issue that Intel has included in their questions later from the pilot.
But what I know is that Intel has resolved a number of issues in the version 12.9.0.1001 driver (which is the latest version for the Cougar Point chipsets) compared to the old driver version 10.6.0.1002 HP has on its support page for the Z210.
And HP seems unwavering in his lack of interest in the Intels 12.9.0.1001 test pilot and then make it available on its support page for what is a product still under warranty
It is a mediocre service if you ask me...
Some HP forum administrator or HP support person hide these forums should impose it in the HP management station and get it looked at. The Z210 is still under warranty for some customers and HP needs to pick up the latest drivers available to all suppliers, test them and then release them to their customers via the support page for this product. All the rest is little change us all.
I was able to resolve the application problem Intel RST by updating to the latest v11.2.0.1006 Intel driver but it has highlighted a few points that HP should address, see linked post above.
PS: Add this post so I can mark the thread as solved.
-
Hello HP,.
I had a problem with my hard drive. HP send me a new.
I copy all the information for the new hard drive recovery, but I think that hp, Manager of recovery do not recognize the recovery partition.
can you help me please?
I was able to do the recovery from the computer disks in a safe mode. now I'm restoration of original image.
just in case I can help someone.
-
Recovery mode in Chinese language - not able to change the language
Hello
I've recently upgraded to Android 6.0 and after that my phone became slower.
I wanted to erase the partition cahche but the recovery menu is in Chinese. How can I change it to English?
And then following the steps. Correct me if I ' am wrong.
1 Swith the phone is turned off
2. turn on the button + volume together for 5 seconds
3. menu is in Chinese
I also read to change the language, you must press the power button + up + down flight together... who does not work in my phone.
Please help me solve this problem.
Thank you
If the problem is solved mark my answer as a solution while others might also find.
The rebuilding of inventories in Lenovo is not unlike other recoveries of the separate options to clear the dalvik cache, partiotion hides etc. When you select erase all information will be deleted including the cache of the partition.
-
Hi, please advise, I can't open Group on win Server 2008 policy management, it is said
"To manage Group Policy, you must log on to the computer with a domain user account.Hi Cucu KurniaPutra,
Thanks for asking this question to Microsoft Community!
The problem occurs in Windows Server 2008 Network, please post your request on the Microsoft TechNet forums to get help.
Here is the link:http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
Kind regards!
-
Impossible to change the computer screen brightness samsung laptop
recently I installed internet explorer 9, after that iam unable to reduce my brightness.but screen before I can able to adapt with the key Fn + arrow down, but subsequently don't not able to adapt, but I can't able to contol volume with the Fn + left arrow key & right keys. but unable to brightness control... so, what's the problem?
Hi david,
1. What is the operating system installed on the computer?
2 are you able to increase brightness using FN + arrow upward?
3. What is the model of your laptop?
I suggest you follow the methods and check if it helps.Method 1: Change the brightness by following the link and check whether or not your laptop brightness changes.To enable or disable the Adaptive brightness
http://Windows.Microsoft.com/en-us/Windows7/adjust-your-monitors-brightness-and-contrastMethod 2: Update the drivers keyboard and graphics cards and check if that helps.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyI hope this helps. -
I am a new user. I love my Blackberry 8330.
However, yesterday I came across a problem where the 8330 disconnects constantly in the middle of operations with the Desktop Manager. He does not often occur in one place. I got several error types: connector specific error 0X80040fb3, cannot synchronize, etc. Spontaneous disconnects are not confined to the calendar, tasks, or address book - it happened during all these and sometimes before it had even begun to synchronize. I pulled the battery once. It synced well after that just to have the same problems the next day.
This happens in the middle of other operations using the Desktop Manager as well. As the backup files. It will shut off in the middle of one of the backup files, or will only stay connected long enough to a backup file.
In all this, the computer recognizes the blackberry as connected and the blackberry continues to display the "connect to the computer.
The Start Menu and taskbar will often hang or disappear after that the Desktop Manager ceases to recognize the Blackberry and then the Blackberry is always connected. Once the Blackberry is disconnected, the start menu and taskbar is released from the hanging or reappears.
Windows XP
Office 2007
Facebook, IheartRadio, Pandora, Slacker, Google Maps and a few other applications installed, Google search, My Verizon
Also meet a few spontaneous reboots, but I think it has more to do with apps than anything else. Some JVM 102 errors on restart.
Feel free to ask me questions. The Blackberry but frustrated love. Have tried other things to search through the forum, but none solved the problem.
It's your first question, it solve first, probably will solve everything
I hope that you have at least 1 good backup to restore after
-
HP Recovery Manager doesn't have to check the disc 1 what to do? Help, please
Hello I have computer laptop hp pavilion notebook pc... g6 but it contains no disk recovery and whenever I have create recoverry Recovery Disk Manager, he did not check the disc 1 and show the message "insert another disc" it happen again and again... Please tell me what to do... i seriouslly want recovery disk
Hello
I would contact HP (the telephone number can be found on the corresponding link below) and explain that the Recovery Media Creator is unable to create a viable set of recovery disks and ask that they send you a free replacement of disks together.
If you live in the United States, contact HP here.
If you are in another part of the world, begin here.
Kind regards
DP - K
-
All pages of the Adobe Web site on my desk are in English, which is my native language. For some reason, on my laptop, all pages display Adobe Web site are coming in French. Now I can read and understand most of them, but I don't want to download the French of the CC version to my laptop. How can I change display from Adobe Web site pages so I can see the English version and then you download the English version of the creative cloud on my laptop. The portable version will be my second "authorized" version, so how can I download it without having to pay for it?
Change language of the adobe.com website - https://forums.adobe.com/thread/1999693
-
After the system recovery, works is no longer installed on the computer
Had to give up the drive to restore my computer. I got work on computer before I dropped in drive, but now I don't have him. Please help as this is an important program that I need to have.
Thank you
Hello
read information below:
'
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Says "updated" adobe application manager however is not installed on the computer?
Just downloaded creative cloud except for illustrator and Indesign, as saying "up to date" but not are not downloaded or installed on comouter more?
If you do not use the uninstall program for these programs that may be why.
-
Download Recovery Manager windows 7 64 bit
Hello!
I formatted my laptop, I installed Windows 7 from a USB key again (here I copied an ISO image of windows 7) and I lost the HP Recovery Manager.
The windows do not work properly and I am trying to restore to factory settings and make my laptop, it was when I bought it. But for this, I think that I need the Recovery Manager.
Could you tell me how to download the Recovery Manager?
I have a HP Pavilion dv6-6140eg Entertainment Notebook PC driver, Windows 7 Home Premium 64-bit.
Thank you!
petrosss wrote:
I am trying to perform a recovery of the system HP (Windows 7) but does not work.
I press F11, and there is an error:
Obviously, I do not have the Recovery Manager and I do not have the windows installation disc, that's why I made a copy in a USB port and tried to install it like that. The screen a problem Windows BCD of the Bank. That will be a big problem to solve
Therefore, the only solution is to order a HP recovery disc and then I install the HP recory Manager? Is the best solution.
in this way after that it can install windows 7? You can still install Windows 7 in the journal you have twenty-five characters license activation key.
Once you have the recovery usb media you can put your laptop in the State wherever it was when you removed from the box when there is a serious issue. If Windows 7 is the operating system, it came with and then by running the Recovery Manager and performing a recovery image factory will reinstall Windows 7 and the recovery partition.
Do yourself the favor of order recovery media usb instead of a set of recovery disks. USB recovery media is durable, unlike a game of recovery disks, which can be damaged by a simple scratch on the side of the label.
Maybe you are looking for
-
A few questions about Apple Watch.
Hello, guys... My name is Alexander and I live in India. I wanted to buy a Apple Watch and I have a few questions. 1. I use Wi - Fi router and did not have cellular data Plans. Now my doubt is, when the iPhone is not connected to a network of data, W
-
Reloading using Yahoo's unexpected Safari pages.
Everyone knows about this problem? When you read an article on Yahoo using Safari, the page reloads randomly on the screen. It takes about 4-5 seconds but it is annoying. I have an iMac (end 2013) 27 "with OS 10.11.4 and Safari 9.1. I'm also using an
-
Satellite C660D-153 - after system recovery bootmgr is missing
I did a complete system restore on my satellite c660d-153 and he says now that the bootmgr is missing at startup. My laptop did not come with a boot disk, so I'm not sure on what to do. Help, please!
-
The colors are almost sepia in shading
-
Only the last account used office is visible on the computer.
Hi, already, when I booted my pc, in Windows 7, all the accounts (including comments) appeared on the "Office" before that any password has been entered (for each account).Recently, something happened and then to start I see only mine, or the last us