Laptop Shake

Similar Questions

• My laptop makes a sound rattle noise

  Hello

  My laptop started making a rattling sound when I use it... fan area I think. I vaccumed the fan in the case where the problem - was there some dust in it - but she continues to shake occasionally after I turn it on.

  Should I stop using my laptop - is it safe to continue to use? Or can I continue to use it and ignore the sound?

  Thank you very much!

  Are you sure this is in the region of fan?
  In my opinion, you can continue to use your laptop, but I recommend you contact the closest service Toshiba and ask for help.

  BTW: what model of laptop do you have?

• Satellite A215-S4757: screen started to shake, moving up and down

  I bought my laptop about a year and a half and no major problems until this week.
  It started a few days when the image on the screen started to shake, moving up and down and lines began to appear on the screen and get out. I restarted the computer, but the screen would not power on. After a few tries, it ends by came and worked fine for a while before he has begun to do the same thing again. It happened a few times until yesterday when no matter how many times I tried it didn't come.

  I don't think that the problem is only with the screen because I have the laptop connected to my TV via the VGA cable and image out there doing the same thing once more. Also although powers mobile upward and the power light lights, satellite words do not light upward unless the screen lights up.

  The CAPS LOCK button also has a light on what should be enlightening (pressed) so if everything works fine and it does not either.

  Does anyone know what I can do to fix this?

  Thank you.

  Hello!

  Have you installed the latest driver to display on the Toshiba site?
  http://www.CSD.Toshiba.com

  In the worst cases, the motherboard should be replaced. I doubt that s a display problem internal because you have the same problem on the external monitor.
  So contact the nearest ASP.

  Good bye

• Shakes the screen & display different colors opening lid

  HY, need help...

  I've had this laptop for 2 years and never had any problems, but a few days when I move the screen to open, adjust or close the screen shakes and display different colors.
  Is there something I can do or is the time to take for repair?

  Thank you

  Hello

  In my opinion it s definitely a hardware problem.
  Either there is something wrong with the connection or the screen itself.

  It seems that you have no experience in the laptop repair and so there is no sense in doing this.
  First of all, I doubt that you have all the tools to check what part is affected and then you could damage other parts while removing the procedure.

  So I think that you should get in touch with local laptop technician and should first try to know what's exactly wrong
  Then you can decide what you would then do

  I mean the screen is one of the expensive components for laptop and possibly it s not worth buying a new

• Satellite A200 - 1 GB: images and display color starts to shake

  I have a satellite A200 - 1 GB, and sometimes it reverses the colors of the screen and starts the image starts to tremble. In the beginning, this event was rare, but now that it becomes more frequent.

  I have the latest drivers and all the vista updates. This first grit in the first I used it (with no other software installed).

  Can someone help me with this?
  Thank you

  > Sometimes it reverses the colors of the screen and starts the image starts to shake

  Didn t see something similar and to be honest I don't think that this could be related software.
  I would say that the dysfunction of the LCD or part as FL-ups or something like that.

  I think that you shouldn't t waste time for an investigation and should contact the ASP to the extent possible.
  Guys should check the laptop and if necessary should replace defective parts.

  The guarantee seems to be valid so don t be worried. It should cover everything!

• Battery pack has a little shake of 1-2mm on Satellite L500-d5310

  Hi friends

  Last month, I bought a new toshiba Satellite L500-D5310.
  From the date of purchase jamsessions, I think that the battery have shake some 1 to 2mm.
  It is common to all computers laptop toshiba or for me only. Kindly help me in this regard.

  Hello

  > this common to each computers laptop toshiba or for me only
  I think it's nothing unusual since the battery is removable and you will notice always a tiny movement.
  I m no owner of the L500 so I can't say if this would appear on other L500.
  By my A200 battery move slightly and U400 battery does not move
  Thismight so always different

  Welcome them

• Pavilion dv6: laptop does not charge when it is plugged

  Today my laptop stopped load so it was still plugged in, ive tried turning on with and without so that connected battery and still nothing is my battery or power cord my problem? The cord connected to the ac area seems loose also, but except that there's no damage.

  Ok. To solve your problem.

  The power\charge the light come on when the adapter is plugged in and the battery is removed?

  Shake gently the connector to the laptop or the power connector from the power adapter does the led flicker?

  The led charge\power is a diagnosis which lets you know if the power adapter is working or has failed.

  If the led does not illuminate the resolution of the problems that I have described is performed, then the power adapter has failed and must be replaced.

• PROBOOK 4530 S: MY LAPTOP WON'T TURN ON

  my laptop won't turn on... I tried a hard reset and still its doesn't turn is not on... If I plug the power supply cable there is no sign of life whatsoever.the power light does not turn on either

  the fan does not turn on... it is not even a single sound or sign of life... I changed the batteries... I changed the charger/power supply but still nothing.i have tried to reinstall the memory and even changed the hard drive, but still nothing and I now suspect the motherboard

  Have you tried to connect the laptop to a power adapter and then gently shake the power adapter connection to see if the power led blinks on and outside?

  Who will let you know if the problem is the connector of the DC adapter on the motherboard. They are not lacking.

• Computer laptop screen flickering and horizontal lines in Inspiron 15r SE 7520

  I have a laptop Dell inspiron 15r is who is 1.1years old (model - 7520). It worked well up to that of a few days. Last week, he began giving a horizontal line of white point at the top of the screen (like that... in white) for the entire width of the screen. Since yesterday, or a similar line began to appear at the bottom too. Two of these online come and go every 2-3 sec. And the screen will jump a little (like 5 pixels or larger) and it will also sometimes shake which makes it difficult to read letters.

  The problem exists everywhere, even in the start screen. In short, when I press power button / stop and screen start showing something problem also begins.

  Today, I plugged an external lcd display via a vga cable and it works fine. No line and no flickering. So I guess that the GPU is ok? What could be the problem? Would be - this contact that loose or something cable laptop computer screen?

  Another question: I got the security, including the protection against accidental damage and stuff for a year. But since I was outside this period, now, what do I do?

  And since I am outside the warranty period anyway is it OK if I open my laptop and try something?

  Help, please!

  If you have found the solution please share with me.

• What Windows search advice laptop specs worked ss14 & 4 k editing automatically using

  My W7 14z 4 year old Dell laptop crashed and I want to buy a new Windows 10 laptop to use with Premiere elements 14.

  I'm looking for recommendations from the community on what has worked for them with respect to laptop computers that they use successfully to edit videos 4 k.

  I'm not a pro but a passionate amateur who uses a camera Lumix FZ1000 capturing 4 k mp4.  My old W7 using an i5 processor struggled to play (stutter) 4 k vids.

  I've heard that Windows 10 with an i7 processor over 4 k friendly.   Any help in my research on what laptop buy would be greatly appreciated!

  The SSD holds the bone, the main software and video projects folder.  If I could, I installed the software high school (such as Word and Excel!) on the HARD disk.  All data, including the original video and photography, is stored on the HARD drive in a main folder backups easily.  I have two separate backup drives.  So, at any time, I have three copies of everything that is important to me.

  There are a few years (with the help of Steve and a guy named Bill Hunt), I worked on a video procedure based SSD that takes full advantage of the SSD speeds.

  For a video project, I create a folder on the SSD.  For example, "C:/Oregon Coast Vacation.  It will be subfolders, 'Active Video', 'Active Photo', 'Audio assets' and 'Output over. "

  If necessary, fill records SSD with COPIES of the required originals that are kept on the HARD drive.  There are many ways to do it, but my favorite is with Lightroom where I put my photo and video organized life.  Lightroom do just as well with the cataloguing of images and videos files.

  Then I open the new project of pre "Oregon Coast vacation" for example in the elements of Prime Minister.  In preferences, make sure that all "Scratch Disks" are set to save in the SSD project folder.  "média Cache" is stubborn and must usually be reset.  The rest seem to remember 'even as project. "

  Then I do a backup to set parameters.  The project is now ready to add the media.  Since I was the video assets have been pre-selected and made copies in the current video file, I load all at once. I get the most important clip and drag it to the timeline to create automatic project settings.  I have check and save again to make sure they "stick".

  Now I do all the editing.  I do regular backups, and sometimes "insurance" I do save money in numbered versions.

  Here's the good part.  Using the operating system (Windows Explorer), I can move the ENTIRETY of THE RECORD HARD drive or even an external drive.  If I want to work on it again, I move back to the SSD.   There are a lot of files, so the move may take a minute.  But the improved SSD performance for video editing more than makes up for it.

  When you change files AVCHD/1080 p 60 my old rendering of output time is close to 1: 1.   In other words, a 3 minute video is rendered in nearly 3 minutes.  If I put in a large number of transitions, effects, etc. it may take more time.   4K video editing feels the same thing while doing the work.  Nothing is slow.  However, the output makes more like 1, 2, or 3.  In other words, one minute 3 4K video may take 6 to 8 minutes.  With 4K, there are more opportunities edition that work without image degradation.  Include "Pan & Zoom", cropping, and "Stabilizer Shake".   Those who will extend the time of rendering output.

  Please keep in mind that my computer is now a few years old.  There may be hardware and software improvements that intelligently uses higher speed drives more quickly and smoothly.  List of Steve and benchmarks can be all your needs.

  Bill

• Using shake on Animation projects in AE CS6 - problems

  Hello

  I have version CS6 AE 11.0.4.2 on Windows 7 Home Premium 64 bit 12 GB of RAM, Nvidia 3 GB on a Toshiba Qosmio laptop.  This isn't a technical support issue, it's a problem that I have with camera shake preset, I have also the effect of agitation no longer works with my animation projects.  My first project used camera on a ball animation here is the opinion of video, the trees moving (shaking) and the ball is perfectly stable and seems to move slowly in the sky:

  Ball - YouTube

  The video above was a tripod from the sky, and a picture of a hot air balloon to appear to move in the sky.  Vibration of the device has been added to give the illusion that it was a helping hand.   It worked perfectly.  Now, all my other animated projects cannot use the pre-set camera more, the ball now shakes with the original film.  Please see this YouTube video that explains more in detail and you'll see what I mean:

  HELP with the problem of camera shake - YouTube

  What I'm doing wrong or what I just do the first time?  I spent about 3 hours on it and does NOT know what is happening. Why the first animation of project work and the other now will not work?  I am at a loss, no idea which continues.  Can someone please help?

  Thank you

  Ron

  I must not understand something here. In your first video, there wasn't a cloud in the sky while the ball looks like it is stable and it is stable. In the second example HELP with camera shake problem - YouTube , there is no clouds in the sky there features around the ball. The ball is still moving smoothly into the sky (drag a guide line in your comp and see for yourself), but the moving clouds give you a very strange appearance in the video because the query does not match. The ball moves smoothly over tremulous background, he would not have done if the camera was shaking. Your problem is not the added preset shaking shake the ball, it is that he does not. There will be a small change in Parallax between the ball and the clouds, but it would be probably enough to notice. If you're simply making the video a relative of the ball, then the shot will look more realistic. It seems to me that you are asking to produce something that would not exist in true direct visually, and your brain knows that it is not good, so you interpret things correctly. Go buy a toy, take it outdoors on a cloudy day and let go and shoot with your smart phone and watch the movement.

• How to reduce agitation with a Tablet laptop?

  I just got a new tablet PC laptop, and I was wondering when I draw freehand, why he shake so much? I can't draw a straight line without going in all directions! Is there a setting that even out / reduce my agitation? I know that's not me! If not, is there by chance a tool or something that I could use to replace Freehand, such that a line tool curve?

  Shieldman_ wrote:

  I just got a new tablet PC laptop, and I was wondering when I draw freehand, why he shake so much? I can't draw a straight line without going in all directions!

  Most of the tools if you hold down the SHIFT key, and then click mouse to go to a second point and click, it will draw a line between the 2 points striaght. If your points are close together, you can draw curved lines, or follow the outline of the picture quite well.

• How can I connect my 1Connectez 1st generation iPod (original iPod) to a laptop

  I have an original iPod and it has a screen old port how to connect it to a laptop and they don't have these kind of show ports more

  Not sure what you mean by "display port"...  The dock connector of the original iPod (2001) is a FireWire port.  You really have an original 1st gen iPod, with a (not key or click) scroll wheel that physically turns a circle?  Looks like this

  

  If so, it can connect to a computer equipped with a FireWire port .  To do this, not to connect to a USB port.  There are "scam" products that claim to be a USB-to-FireWire adapter cable, but they don't work; they can even cause damage to the iPod if used.  FireWire and USB work very differently (and even use different power supply voltages); You cannot connect them just by changing the shape of the connector.

  If your computer is a Mac (no FireWire port) with a Thunderbolt port, Apple sells a Thunderbolt-to-FireWire adapter.  On a Windows PC, to connect to the 1st (or 2nd) gen iPod, you add an expansion card of a certain type that provides an actual FireWire interface.  For more details, please provide more information on your situation.

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• Is it possible to use Microsoft Money on a mac laptop?

  I think of buying my first mac laptop.

  Is it possible to use Microsoft Money on the mac?

  Install Windows on your Apple computer then any program that runs on Windows. Windows can be installed using Boot Camp Assistant or using a machine virtual Parallels, Fusion, or VirtualBox.