Laptop still slow even after standard performance settings

Similar Questions

• HP Mini 210-1000 is very slow, even after disabling several programs.

  I bought a HP Mini 210-1000 little more than one year. 1 GB of RAM. Win 7 Basic. Since only my son used and that occasionally, I never realized how incredibly slow, it was. Often, it takes 1 min for IE open a page. Even though I have broadband, I can't watch Netflix movies. I have disabled several programs in the menu of boot, run CCleaner, but it is still slow. When I check the Task Manager, it seems that 60-70 memory is used even when the CPU usage is 5%. I tried to tune up with HP Support Assistant, but when I click on update, it fails to update, fails to analyze or gather information. HP Support Assistant is only for products still under warranty? Can I maybe just uninstall and reinstall? Or am I left with no other choice than the upgrade of perhaps the memory? I would appreciate any advice. Thank you.

  boonetrace wrote:

  He said no "reference" on the mini, only the number of 'product', that is: WH684UA #ABA. Thank you.

  I was thinking about product and written a part.

  The first time I asked the correct thing and, unfortunately, I made a mistake.

  My advice? I would upgrade the RAM to 2 GB.

  Resource:

  Crucial - HP Compaq HP Mini 210-1084NR Netbook

  You can check some solutions in the link below:
  How to speed up system boot time and performance.

  PS.

  Remember then it's the netbook, so it will be never powerful as laptop.

• Running slow even after reimage... time to replace the 5100 disc drive?

  My laptop 5100 is very slow and I hear the drive access very regularly and it affect playback of the media while doing other tasks. Even after recess with the CD that accompanies it improves a lot.

  I'm assuming the drive is dying, but open to suggestions. Out of curiosity he would make a difference if you had everything on one big partition or multiple?

  According to Device Manager the drive is a MK6021GAS. A few questions for those who have the necessary expertise to respond to...

  (1) do I replace with the same Toshiba player?

  (2) can I replace it with a larger drive?

  (3) everyone has replaced these discs successfully?

  (4) any recommendations on where to buy?

  BTW, this laptop was purchased in Australia if it makes a difference.

  Thank you very much
  Richard

  Hello

  (1) you must not buy exactly the same HARD drive, but it is always recommended to use the compatible module.
  (2) theoretically Yes. . I think 60 GB is really enough for this camera, but I think that 80 GB HARD drive is recognized correctly.
  (3) the disc replacement is very easy and you can do it alone. In the lower corner, near the battery, you will find the HARD drive cover. I'm not sure, but it is fixed with a screw. Remove carefully and you will see how the HARD drive is placed there.
  (4) Google a bit. You will find a large number of suppliers. You can also buy it in every store of PC. eBay is also an alternative.

• Satellite 1410 - slow even after formatting

  My computer became very slow (I can't watch the videos), so I thought that I had a virus and I scanned my pc.
  He found a virus called "fast.exe", I deleted this file, but I've always had some problems, so I tried to format the pc using the recovery disks but my pc is still slow.

  The format made by the recovery disks all erase or overwrite just the system?

  Some people advised me to do a low-level format, but I don't know how to do it and I always thought it was very dangerous.

  What should I do?

  Hello

  As far as I know if you reinstall your operating system with recovery CD, it is not low level formatting. All your data will be deleted. Each time until you want to reinstall OS Backup your data. If you have the second partition you can save it there.

  Don t worry. Reinstall your operating system. Also, try to install the SP2 to make sure that your laptop is up-to-date.

  Many factors can be responsible when your computer is running slowly. You can also disable all processes that you don't need. You can find them in the System Configuration utility (start > run > type msconfig and click OK). Under Startup, you can turn off all programs that you don't need.

  I also have bad experience with the speed of my machine. After the installation of Antivirus software, my laptop was very slow. Without this machine software was fast again.

  Back up your data and try to find out what the problem is with your Satellite.

  Good bye

• Pavilion g6t-2300 CTO select: seeing power HP Pavilion is still on even after closing down and the battery won't charge no - 10 Windows

  My HP Pavilion power LED is still even after closing. I disabled option quick start, but the problem was not fixed. Another problem is the battery will not charge if it is showing connected. My OS is wondows 10. Please help me. Thank you.

  Hello

  Please try the following fix:

  https://www.CNET.com/forums/discussions/help-my-PC-with-Windows-10-wont-shut-down-properly/

  Kind regards.

• Still slow Mac after installation of 16 GB of RAM

  Hello

  My MacBook Pro has been slow, taking a lot of time to do simple tasks and constantly showing the spiral of spinning. I upgraded to 4 GB of RAM, 16 GB. He has certainly made a difference, but still shows the spiral occasionally for simple tasks. I'm afraid that when I finally run several tasks at once (InDesign, Illustrator and Photoshop, for example), he won't face.

  I have an audit of the being - y at - it something else I could do?

  Your help is highly appreciated

  EtreCheck version: 2.6.6 (226)

  Report generated the 16:48 09/04/2016

  Time 04:19

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  MacBook Pro (15-inch, mid-2012)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Pro - model: MacBookPro9, 1

  1 2.3 GHz Intel Core i7 CPU: 4 strands

  16 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 543 - SN = D862076022CDGDLAY

  Video information: (Does that mean?)

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M - VRAM: 512 MB

  Color LCD 1440 x 900

  Software: (Does that mean?)

  OS X Yosemite 10.10.5 (14F1912) - since the start time: 17 hours

  Disc information: (Does that mean?)

  HTS547550A9E384 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 498,88 go-go (260,05 free)

  Encrypted AES - XTS unlocked conversion

  Storage of carrots: disk0s2 499.25 GB Online

  OPTIARC DVD RW AD - 5970H)

  USB information: (Does that mean?)

  Apple Inc. FaceTime HD camera (built-in)

  Broadcom Corp BCM20702A0

  Computer, Inc. Apple IR receiver.

  Apple Inc. Apple keyboard / Trackpad

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  / Library/Extensions

  [loading] at.obdev.nke.LittleSnitch (4246 - SDK 10.8) [click for support]

  / System/Library/Extensions

  com.devguru.driver.SamsungComposite [no charge] (1.4.31 - 10.6 SDK) [click for support]

  com.seagate.driver.PowSecDriverCore [no charge] (5.2.6 - 10.4 SDK) [click for support]

  [no charge] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [click to support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.6 - 10.4 SDK) [click for support]

  com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.6 - 10.5 SDK) [click for support]

  com.seagate.driver.SeagateDriveIcons [no charge] (5.2.6 - 10.4 SDK) [click for support]

  /System/Library/Extensions/ssuddrv.kext/contents/plugins

  com.devguru.driver.SamsungACMControl [no charge] (1.4.31 - 10.6 SDK) [click for support]

  com.devguru.driver.SamsungACMData [no charge] (1.4.31 - 10.6 SDK) [click for support]

  com.devguru.driver.SamsungMTP [no charge] (1.4.31 - 10.5 SDK) [click for support]

  com.devguru.driver.SamsungSerial [no charge] (1.4.31 - 10.6 SDK) [click for support]

  Launch system demons: (Does that mean?)

  [operation] com.seagate.TBDecorator.plist [click to support]

  Launch officers: (Does that mean?)

  [operation] at.obdev.LittleSnitchUIAgent.plist [click to support]

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [loading] com.adobe.CS5ServiceManager.plist [click to support]

  [failure] com.canon.MFManager.plist [click to support]

  [loading] com.divx.dms.agent.plist [click to support]

  [loading] com.divx.update.agent.plist [click to support]

  [loading] com.google.keystone.agent.plist [click to support]

  Launch demons: (Does that mean?)

  [operation] at.obdev.littlesnitchd.plist [click to support]

  [loading] com.adobe.SwitchBoard.plist [click to support]

  [failure] com.adobe.fpsaud.plist [click to support]

  [loading] com.google.keystone.daemon.plist [click to support]

  [loading] com.malwarebytes.HelperTool.plist [click to support]

  [loading] com.microsoft.office.licensing.helper.plist [click to support]

  User launch officers: (Does that mean?)

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [loading] com.adobe.ARM. [...]. plist [click for support]

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist [click to support]

  [loading] com.divx.agent.postinstall.plist [click to support]

  [operation] com.spotify.webhelper.plist [click to support]

  Items in user login: (Does that mean?)

  TomTomMyDriveConnectHelper Application (/ Applications/TomTom MyDrive Connect.app/Contents/MacOS/TomTomMyDriveConnectHelper.app)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  KiesAgent hidden UNKNOWN (missing value)

  CleanMyMac 3 Menu UNKNOWN (missing value)

  ImageTransferUtility UNKNOWN (missing value)

  WirelessCameraService UNKNOWN (missing value)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)

  fuspredownloader hidden Application (~/Library/Application Support /.) WAS / fuspredownloader.app)

  Other applications: (Does that mean?)

  [ongoing] com.adobe.InDesign.41496

  [operation] com.adobe.PDApp.AAMUpdatesNotifier.81256.23768A6A-EC70-4D8C-A250-565D704DEDED

  [operation] com.apple.xpc.launchd.oneshot.0x10000002.Little Snitch Network Monitor

  [ongoing] com.etresoft.EtreCheck.75292

  [ongoing] com.microsoft.Word.53424

  [ongoing] com.Microsoft.AutoUpdate.FBA.48312

  Plug-ins Internet: (Does that mean?)

  Web of Google Earth plugin: Version: 7.1 [click for support]

  Default browser: Version: 600 - SDK 10.10

  OVSHelper: Version: 1.1 [click for support]

  AdobePDFViewerNPAPI: Version: 11.0.16 - 10.6 SDK [click for support]

  FlashPlayer - 10.6: Version: 22.0.0.192 - 10.9 SDK [click for support]

  DivXBrowserPlugin: Version: 2.2 [click for support]

  Silverlight: Version: 5.1.40416.0 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 22.0.0.192 - SDK 10.9 obsolete! Update

  SharePointBrowserPlugin: Version: 14.1.0 [click for support]

  AdobePDFViewer: Version: 11.0.16 - 10.6 SDK [click for support]

  JavaAppletPlugin: Version: 15.0.0 - 10.10 check the version of the SDK

  User Plug-ins internet: (Does that mean?)

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

  Safari extensions: (Does that mean?)

  DivX Plus Web Player HTML5 < video >

  3rd party preference panes: (Does that mean?)

  DivX [click for support]

  Flash Player [click for support]

  ROAR [click for support]

  Paragon NTFS for Mac® OS X [click for support]

  Dashboard Seagate for Mac OSX [click for support]

  Time Machine: (Does that mean?)

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Macintosh HD: Disc size: 498,88 GB disc used: 238,83 GB

  Destinations:

  BEK HD [Local]

  Total size: 499,73 GB

  Total number of backups: 6

  An older backup: 11/09/2014 03:34

  Last backup: 11/09/2014 08:55

  Backup disk size: too small

  499,73 GB backup size < (disc 238,83 GB X 3)

  Top of page process CPU: (Does that mean?)

  34% com.apple.preference.security.remoteservice

  10% WindowServer

  6% safari

  3% kernel_task

  3% hidd

  Top of page process of memory: (Does that mean?)

  4.02 GB com.apple.WebKit.WebContent (18)

  1.13 GB kernel_task

  Softwareupdated 492 MB

  311 MB Adobe InDesign CS5

  Safari of 279 MB

  Virtual memory information: (Does that mean?)

  3.65 GB of free RAM

  12,00 GB used RAM (7,09 GB being cached)

  Used Swap 0 B

  Diagnostic information: (Does that mean?)

  Sep 3, 2016, /Library/Logs/DiagnosticReports/Photos_2016-09-03-231751_[redacted].hang 23:17:51

  Sep 3, 2016, 23:07:03 self-test - spent

  Dear Florence,

  EtreCheck version: 2.6.6 (226)

  Report generated the 16:48 09/04/2016

  This report Etrecheck was performed in April and so is little help for you or us eiterh today. There was also performed with an older version of CBS and not all useful information, display the current versions.

  Please download the latest version of CBS on its official website: http://etrecheck.com/ . Then again and post a new report of the CE. In this way, you won't get unworkable advice of a person who fails to see that the report is badly outdated.

• MacBook Pro running slow even after upgrade

  I have a MacBook Pro 13 inch model mid 2012, which had 4 GB of RAM, 500 GB hard drive, processor i5 2.5 Ghz, Intel HD Graphics 4000 1536 MB and running on OSX El Capitan version 10.11.5. I upgraded my RAM from 4 GB to 8 GB, still my Mac is slow. Apps for open at the usual time, he used to take when I had 4 GB of RAM. I bought the RAM correct as required by the specification of the laptop from the apple Web site. I tried all possible measures to increase my speed of laptop by Google but there was a lot of difference.  Help, please!

  There are 2 things you can try to improve the speed of your MacBook Pro.

  1 backup all your data, then on boot hold down CMD + R, then open disk utility and format your hard drive. You go to install a new copy of Mac OS x.

  2. follow the same steps as above but swap your hard drive outside with a SSD before doing the CMD + R reset tactical.

  MAKE SURE THAT YOU BACK UP YOUR DATA FIRST

  I have the same machine and had the same problem, my MacBook Pro is faster than ever.

• Portable operation extremely slow even after the system recovery

  I have a series of g laptop and on last week, it started running VERY slowly after the start. It came from nowhere, because it allows to work just fine the day before. So yesterday, I restored the factory setting and saved without previous files or documents. He worked as new for a few hours and then it suddenly becomes very slow. It's so slow that it freezes or it loads forever when I just click or click on the Start button. Pretty much everything I had there, it was iTunes malawarebytes, utorrent, steam and some other stuff that is were all on my computer before the problems began. Help will be greatly appreciated!
  
  Best regards, Nicolas

  Hi Nicolas,.

  Regarding the size of the hard drive, there may be problems with the recovery process if you are installing a drive of smaller capacity than one that was originally supplied with your laptop - the same size or slightly more is Ok.

  Unfortunately, I do not see the image of your link, but I think I know what you are referring.

  I guess than the previous you reinstalled the operating system is using the D Partition of hard disk recovery.  However, with a new disc, it will not be possible that the disc is not completely empty.  You will need to use a set of recovery DVDs to reinstall the operating system on the new drive - however, this procedure going to re-create the recovery on the new drive Partition automatically.

  All you have to do, once the new drive has been installed is to operate on the esc key when you launch Notepad to open the Start Menu.  Insert the recovery DVD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.  This will start the Recovery Manager and the whole procedure will be very similar to the previous method, you used - you will be prompted by the software when you need to change DVD to continue the process.

  Kind regards

  DP - K

• My macbook air 13 "(2015) is very slow, even after a clean install"

  Hello

  I have a macbook air 13 "from 2015 and it is VERY slow. I did a clean install from scratch of El Capitan (10.11.06) and always very slow.

  Etrecheck give ' "Performance: poor"»

  Is there a hardware problem? or what to do?

  Thank you

  EtreCheck version: 3.0.6 (315)

  Report generated 2016-10-05 10:18:11

  Download EtreCheck from https://etrecheck.com

  Duration 17:11

  Performance: poor

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  too slow

  Hardware Information: ⓘ

  MacBook Air (13 inch, early 2015)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Air - model: MacBookAir7, 2

  1 1.6 GHz Intel Core i5 CPU: 2 strands

  8 GB RAM not extensible

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 40

  Video information: ⓘ

  Intel HD 6000 graphics card

  Color LCD 1440 x 900

  Software: ⓘ

  OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour

  Disc information: ⓘ

  SM0128G SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) / [Startup]: 120,10 (Go 104.05 free)

  Storage of carrots: disk0s2 120.47 GB Online

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [no charge] 6 tasks Apple

  tasks of Apple 166 [loading]

  [running] Apple 58 jobs

  [killed] 9 tasks of Apple

  9 killed process lack of RAM

  Launch system demons: ⓘ

  [no charge] 47 Apple jobs

  [loading] 158 jobs Apple

  [running] Apple 77 jobs

  [killed] 8 tasks of Apple

  8 killed process lack of RAM

  Launch demons: ⓘ

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-10-04) [Support]

  User launch officers: ⓘ

  [loading] com.bittorrent.uTorrent.plist (2016-10-04)

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-10-05)

  Items in user login: ⓘ

  iTunesHelper program (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  uTorrent program (/ Applications/uTorrent.app)

  CleanMyMac 3 Menu program (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Plug-ins Internet: ⓘ

  Default browser: 601 - SDK 10.11 (2016-09-03)

  QuickTime Plugin: 7.7.3 (2016-07-09)

  3rd party preference panes: ⓘ

  None

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  14% WindowServer

  4% kernel_task

  0% SystemUIServer

  0% cloudpaird

  Top of page process of memory: ⓘ

  670 MB kernel_task

  Mdworker (11) 188 MB

  Com.apple.CommerceKit.TransactionService (2) 41 MB

  Finder 41 MB

  Mds_stores 33 MB

  Virtual memory information: ⓘ

  5.02 GB of free RAM

  2.98 used GB RAM (1.82 GB being cached)

  40 MB used Swap

  Diagnostic information: ⓘ

  5 October 2016, 09:38:39 test - passed

  Hello, have you tried to reset the management system (SCM) controller on your Mac - Apple Support?

• Firefox running slow, even after the reset AND reinstalled

  For the last several days that Firefox has worked really slow. When I open a new window it takes about 20-30 seconds to open an or if I try to load a site with flash (say for example of youtube) it takes time to load the site and you can not click anything, like back, address bar or even the X to close the window.

  I have scanned for viruses and found nothing. I thought it was my computer when Firefox started to slow down, but I opened Opera and Saferi to see what it looked like and they are fine. Works very well. If I restart the computer, Firefox works fine for say 2 hours before you start to slow down slowly again over time (about 5 hours later it is uber slow!). I also reset Firefox that again gave the same result as the computer restarts, very well for a few hours before starting to slow down again. Reinstalled Firefox, but again it's very well for a few hours.

  I don't know what to do. Firefox is my main browser, but I can't continue to use it like that because it takes forever to do anything.

  Create a new profile as a test to see if your profile is the source of the problems.
  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  Profile backup and restore

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Re: Satellite A500 slow even after a clean install of Windows7

  My laptop has suddenly slowed a lot about 4 weeks and seemed to have a virus problem causing a BSOD. Any attempt to solve this problem have failed, while we just do a clean install of Windows7, in the hope of resolving the issue of speed.

  However it takes a few seconds to respond to each click of the mouse at a point where only Bullguard antivirus and Windows 7 are installed on the laptop.

  I checked that the latest BIOS is installed v1.90.

  I checked that all device drivers are up-to-date.
  I checked the hard drive for the flaws and bad segments.

  Please can anyone offer help or advice?

  Thank you very much.

  Hey Buddy,

  Have you tried it with the Toshiba Recovery disk recovery facility?

• Computer running slow even after the factory restore

  OK I'll try to summarize the best that I can about it.

  I own a Toshiba U405D 1 1/2 years, delivered with a pre-installed version of Vista Home Premium. Not a SINGLE PROBLEM NEVER, until some time late last week.

  All of a sudden (and I mean that), Windows Explorer, Windows update, and essentially the main components of my OS has become unstable. Does not not for no reason, going slowly like a dinosaur... I mean it was bad.

  Virus scan; nothing wrong. Spyware; Nada. Check disk; It froze on me twice. Safe mode; error messages like "CCC.exe unresponsive", etc. I uninstalled MANY programs; process of elimination of obviously. Always problems. So, after that it froze several several times, finally got behave long enough to create recovery disks and wiping my HD.

  After finally getting back to factory settings and starting over with my files and other, begins to have the same problems again, but now a new problem. Sometimes when the fan is, I hear a click or sound like something is stuck in the fan itself. Never had this happen before, ever.

  I don't have IE8 or any software to download. Regarding the programs installed personally, I have Norton (usually I do not use it, but I did not have time to change my Anti-vir antivirus), iTunes, lots of music from my CD collection (about 8 GB) and school of working files.

  I need to know if his time in the trash this thing and get a new, upgraded to 7 machine or can I retrieve this piece of ____?

  ~ Thank you ~

  If the same issues are produced after a recovery, it seems that it may be hardware problems.

  And the click could be a hard failure.

  See you soon.

  Mick Murphy - Microsoft partner

• the audio is still audible even after muting in multicam editing

  Hello

  I have a strange behavior: in a multicam editing, I cut the track, I pull down of the dB, I uncheck the audio but I can still hear the noise! It's really weird. When I go to edit/set his silence she is silent, but if I want that part muted, I can't. Tried the new compound clip, same problem.

  Could you post a screenshot of what happens? Could help to see what is causing the problem. Maybe the project Editor screenshot and/or multicam.

• Need help to remove the small white lines between attached forms. Still visible even after aligning anchor points.

  Hey, I'm new here, so many apologies if the community has been asked this question several times before. I do a quick search, but couldn't find an answer to my problem anywhere. Would be very grateful for help.

  I'm quite a beginner with Illustrator, so this may be something embarrassing simple!

  But as the title says, I have a very frustrating problem, trying to create an image of polygon. I've been using the pen tool to make triangles, then join all my anchor points with the horiz/vertical align Center. Roads joined look good, until I have add color... Triangles have a very light white line on them, I have tried to delete the anti alias, which solves the problem, but then the triangles look pixelated. Even when you import into Photoshop the pale lines are visible, as well as when the file is merged or saved as a JPG file.

  I've seen some very impressive polygon art and forms look seamless when joined.

  Here is an example of the problem. Ideally, I'd like that forms merged without rough lines.

  See you soon! Any suggestion would be appreciated.

  .

  BRI,

  I just read it again.

  align the center of horiz/vertical

  works on objects, rather than Anchor Points.

  You can have triangles which fail to assemble completely.

  Try this, smart guides are your friends:

  Starting with the last triangle (you can see the stacking order in the layers palette), click the path to find) and work your way upward as follows:

  1) click on the lower triangle with the selection tool.

  2) click on one of the neighbors, and move it to the bottom to be second in the stacking order, then move it a little far, then ClickDrag back by one of the Anchor Points to be aligned corresponding to the lower anchor (Smart Guides say anchor when you are there).

  (3) with the ClickDrag Direct selection tool other anchor Point to snap (you can drag a bit far and back until the Smart Guides say anchor);

  Who should ensure a full adjustment between the two less triangles

  4) continue until you are finished with the other triangles.

• My laptop still give me a version track even after the connection

  I downloaded CC on 2 Mac 1 desktop and 1 laptop.  My laptop still give me a version track even after the connection

  If it please try to disconnect from the creative cloud and reconnect. Try to follow:

  1. https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
  2. https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html