Formatting and divide the HARD disk

Similar Questions

• Why the hard disk is divided into partitions of two data (C:Vista and E: Data)?

  I just started a new A200-1V0 and found that disk space is divided into two partitions of sizes equal 'C:Vista' and ' E: Data "(and a small one EISA).

  WHY? What is the logic and purpose? It's not even as if the C:Vista partition is smaller and intended only to the tricks of the 'system' as the root 'Users' (user Documents) is on it also.

  This is the default for Vista (my first use of it), if not, who said that Toshiba could do this without asking me?

  How can I move the root 'Users' in Vista (in the data partition) - if I have two partitions that I might as well use it?

  I can resize partitions in Vista without a utility 3 rd-party (or a complete backup/restore)?

  Thank you

  Hello just YOU

  Please don't be offended because there is no reason for this. You bought the new product with the factory settings. Toshiba and other hardware manufacturer do not know every customer personally and, unfortunately, it was not possible to ask YOU how to set up YOUR laptop.

  Because of this, there is a recovery of product support that allows to configure the HARD disk according to your wishes and needs.

  Please use this DVD and install OS how you want it to be. What recovery procedure starts, you will see CONFIGURATION option on the right side. Click on it and choose the right option.

  Reinstall the OS and enjoy your life. Really, I don't have the time to write on the floors of two partitions, because this is basic stuff and you probably don't want to waste your time to read this.

  Bye and good luck!

• Can I use the HP Recovery partition after formatting and partitioning the rest of the hard drive?

  I recently had my HP Pavilion dv4 2145dx laptop (Windows 7 64-bit) go kerput.  The Geek Squad said that the motherboard is dead.  I bought a laptop and I use this one for now, and I use the former dv4 as external hard drive.

  I intend to continue to use the hard drive from the old dv4 as an external unresolved for now, but I wish we could fix the dv4 at some point in the future.  Here's the problem: to get the most out of the former dv4 as external drive, I want to repartition it so that there is an NTFS partition and one HFS partition +.  This way I could easily use it with my Mac and Windows machines.

  But if I do that, I'm not sure if the image of HP recovery would continue to operate.  If it does not, then if/when I get the old dv4 a new motherboard, I couldn't restore the operating system from the recovery partition.  It is a problem, because I have not create recovery disks (stupid, I know - I'm definitely making them for the new machine).

  So, I want to do these two things:

  (1) create my dv4 recovery disks.  Can I do this if the dv4 drive is mounted in an external enclosure?

  (2) format and partition the drive dv4 (the leaving intact recovery partition) and later to recover the system from the recovery partition.  The recovery partition would continue to operate in these conditions?

  Thanks for any help that anyone is obtained.

  Hello:

  What you do to the C:\drive will make the ineffective recovery partition.

  You will not be able to create a set of recovery discs unless the drive is usable in Notepad.

  Can you still read all 25 characters of your product key of W7 on the bottom of your laptop broken?

  If so, you can do this...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Or, you can probably still order a set of recovery disc for your HP laptop.

  http://support.HP.com/us-en/document/bph07143

  Paul

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• What is the preferred method of formatting and partitioning a hard drive?

  Format the hard drive... and build a Partition... (question of part 2)

  I finally get my CD with Windows 7 and ready to install... I just thought I would ask the "Perferred" formatting the hard drive method...? Quick format in fat files... a quick format in NTFS... elongated format... What is the formatting the hard drive perferred method... Also... build a partition to install Windows 7 within this partition... It is also the preferred method... ?? You don't computer Pro to always build a partition and install the Windows operating system inside the partition... ?? What is the perferred method... ?? I would like to try this for the first time... !!! Is it easy to do... ??  What size partition can I build... ???

  During the installation process, you can format/delete/create partitions on the disk hard if you perform a custom installation. Data backup before installing Windows.

  Using NTFS with Windows 7 system.

  Most people do a quick format.

  Install Windows 7 on a partition with a minimum of 60 GB. 100 GB or lager is recommended. You can use all the hard disk to the Windows partition if you want to.

  Format/delete/create the partition with the Windows 7 installation DVD, you can:

  1 boot from the DVD

  2. click on install now

  3. in the configuration screen, click Custom (Advanced)

  4. click on Drive Options

  5. you have the option to format/delete/create partitions and choose size during the creation of their

  6. continue with the installation.

  Installation and reinstallation of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Activate Windows 7 on this computer

  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

  Case of failure of the online activation:

  Call Microsoft use the manual phone Activation

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  1. open Windows Activation - click on the Start button, right-click computer, click Properties, then click the option to activate Windows now or change your key.

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated phone system.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. dial one of the available phone numbers listed.

  7. do not select all options and wait for a person pick up, then explain what happened.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Satellite P300 - 190 PSPC2C - water spill and the HARD disk does not appear on the Setup

  Hello

  Spilled water on the keyboard. Laptop has stopped working.
  Dried, but did not recognize the HDD start up and HDD does not Set - up.
  Moved the HARD drive to another location of the HARD drive on the laptop and it appears at startup and boot OK.
  Is there an easy way to find and repair the defective HARD drive slot?

  Thanks for any help.

  PK

  Hello

  The HARD drive slot is not repairable. It s a HARD disk controller and I guess the HARD disk controller is dead.
  The HARD disk controller is part of the motherboard and if you want to repair it, so the entire motherboard must be replaced.

  New motherboard would cost a small fortune he of not good about market 350Euros
  That's why I put t think it is s to replace the mobo only to get the HARD drive in the first location of work

  This is my personal opinion...

• Cannot open the hard disk C: and D:, or no matter what follder on them by double-clicking

  After download cannot open the hard disk C: and D: Internet Explorer 9 windows updates or no matter what follder on them by clicking twice and I opened by right clicking and open.  So I have to use him created restore point Internet explorer 9 and return to internet explorer 8 and the previous record and the problem is solved. How I overcome this problem?

  Babis

  This can be a symptom of malware on your system. Take a look at the guides below for advice in conclusion/remove the malware from your system:
  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

  Also: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/my-internet-explorer-has-been-hijacked-by-a-virus/f26f7291-d646-4870-864e-a31976df0011

• How can I "RECORD each piece of data (and I mean everything!)" contained in the hard disk of the laptop? »

  How can I "RECORD each piece of data (and I mean everything!)" contained in the hard disk of the laptop? »

  I know PC never fade completely everything, so if there is a way to get personally, I'd really like the head upward on the how to do?  I would be better for me to download all this information on a PHDD, rather than handing the portable real in question so that its content of forensics experts, because current 'Communications Network serious security' we have been subjected to.

  Here you go:

  1. Use an imaging program to create a clone of your hard drive.
  2. Delete the original from your PC hard drive and keep it somewhere safe.
  3. Put the clone in the PC.

  It is the only way to really keep all while still able to use the PC.

• photos should be on the hard disk and not a network before catalog reader can find them.

  My photos are on a network drive. I created a catalog on the hard drive of my computer of these photos. When I later open the catalog, Lightroom indicates that the file is not found. Photos should be on the hard disk and not a network before catalog reader can find them?

  "Can't find" indicates Lightroom does not know the location of the photo because it has been moved, deleted or renamed outside of Lightroom.

  To resolve this problem, follow these instructions: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  Photos can be on a network drive.

• I want to copy my lightroom catalog and photos of the hard disk to another.

  I want to copy my lightroom catalog and photos of the hard disk to another. I tried to use the copy and paste, but when I try to open the catalog on my laptop lightrooom cannot find the photos because he is always looking for them on the old hard drive. How can I get lightroom to get on the new drive? When I try to manually connect the photos they disappear just from any folder, they are in Lightroom.

  Hi Mike Nature.

  Greetings.

  As you have already moved the catalog and the files on the hard disk up, visit this link on how to find missing images/files

  • https://helpx.Adobe.com/Lightroom/help/locate-missing-photos.html

  I suggest you look for missing files.

  The images do not disappear, but after the relining, they should be available under the new hard drive.

  Concerning

  Rohit

• Clone the hard disk, including Photoshop CS6, and now it works like a trial Extended CS6.  Why?

  I was running a licensed version of Photoshop CS6 on computer Dell Precision T3500 years.

  The hard disk was running out of space, so I disabled Photoshop CS6 (not uninstall), cloned successfully, all of the hard drive on a new larger hard drive, and then again CS6.  He now works as a trial Extended CS6.  Why?

  At this point, I'm not re-entered my serial number, since I did not purchase the extended version.

  I would she runs as just CS6 (not extended) and be able to activate it with the same serial number, I used before.

  (Over the years, I've updated since Photoshop CS2, in CS4, CS5, CS6 to - don't know if it matters in this case).

  Enter your serial number and your extended trial period will be converted to a full ch (not extended) when your serial number is evaluated.

• Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Have already tried to contact Adobe and they told me to reinstall the program. I did this and the same issue. It's crazy. I can not turn off something that I did not more...

  Thank you.

  No - I had, of course, tried all these things. Finally, I had someone (after several days) on the personal chat group that could fix and it did it in a few minutes. Too bad that nobody else seemed to be able to do. Adobe is very soft.

  I can't thank enough the other person - it was amazing.

• Why the HARD disk is partitioned into C & D on Satellite Pro C partition

  Why the HARD drive is divided and how to use it?

  It is important that the one that I use?
  It turns into one big disk?

  The manual says nothing about this.

  Thanks for any help

  Ken

  Hello

  The HARD disk is partitioned and contains two partitions. The C partition is the system partition that contains the Windows operating system. The second D partition contains data drive HARD recovery.
  HARD drive recovery allows you to establish the notebook back to factory settings without the recovery disk usage.

  But it s is strongly recommended to create the recovery disk! The user manual provides the info on that in case something goes wrong with the HARD drive, the recovery disk allows you to recover the laptop.

  Of course, you can delete the D partition if you want to, but before doing so, you must create the recovery disk.

  However, my HARD drive contains 3 partitions. I created an extra. In my case, the C partition contains only system and the unique software. My files private like Mp3, movies, etc. are placed on the D second partition).
  The third partition (E) contains a folder with games.

• Satellite P100-429, stopped after you create the partition on the HARD disk

  After you create the partition on the HARD disk. PC just stopped.
  After using the restore CD, nothing happened again, any ideas?

  Hello

  Express media player has been installed on the partition of the laptop?
  I can give you a good solution for 100%, but there may be a conflict between the express media player partition and the new partition.
  Have you installed the OS on the new partition?

  Hey Buddy, try to delete the entire partitions in the HARD drive and format the HARD drive completely. Then try to use it again the Toshiba Recovery CD and install Toshiba image on the HARD drive.

• How can I activate the hard disk I installed om my 4700 Centria?

  I installed a hard drive on the Centria 4700. Network engineering does not recognize. I expected that I could format the hard drive of Centria. What should I do to activate the hard disk

  It is a question of router, and you send messages in the ReadyNAS forum.

  I'm moving it to home networks.