Laptop support two hard drives

Similar Questions

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• Can I use two hard drives in the Qosmio G40-10th

  Anyone know if it is possible to install two hard drives in this laptop. I read simewhere that it had to be two slots hard drive in it?
  If so where is it located?
  Ther would be all issues around extra heat that could be generated etc.?

  I have had mine for about 5/6 months and have had a screen replaced (defective backlight).
  Many other people have had problems?

  I wonder if its worth buy the extended warranty.

  See you soon.
  Sunil

  Hello

  As far as I know this laptop takes support only a single HARD disk.
  Check the underside of the laptop. Do you see a second slot (cover) the second HDD?
  I imagine that it has a single HARD drive Bay, and so only a single HARD disk can be used.

  I m not a G40 owner and, therefore, I cannot comment on any other issue.
  But each computer technology may start to malfunction it is why I always recommend buying an extended warranty.

  Best regards

• How to transfer data from laptop to external hard drive?

  How to transfer data from laptop to external hard drive?

  my model is vgn-cr323.

  Thanks in advance

  Let me provide you with General information on how you can transfer data from your computer to an external drive.

  To transfer the data, plug the USB cable into the correct port. Usually, your computer will know that he has a new disc attached and a pop box up will warn you. It will scan to determine what to do with the new connection and your computer will assign a drive letter (for example, drive G: and so on.) This will allow you to transfer data to the external hard drive just like you would move files on your internal hard drive.

  Once you have the USB cable plugged into your computers port (and the other end plugs into the external drive) you can now start to save files you want on the external hard drive.

  Open the item (s) or folder (s) you want to transfer or save on your external hard drive. There are two ways to save external hard disk 1). If you have only one or two things to save, you can open each item, click on file / record under... and choose the letter/drive (for example, drive G corresponding to that of your external hard drive, click Save.) This he recorded on the external hard drive.

  For more information on your model Asia Pacific computer we recommend contacting Sony's Support Center in your area at http://www.sony-asia.com/section/support.

  If my post answered your question, please mark it as "accept as a Solution.

• Satellite A210-1AO - support SATA2 hard drives?

  I have Toshiba Satellite A210-1AO and I want to spend her hard drive.
  It does support SATA2 hard drives?

  Hello

  Disks hard SATA2 can be used in every laptop or computer with SATA interface. The new SATA2 interface has the same connector and downgrade compatible. This means that SATA2 is faster, but only in theory. Hard drives are not fast enough to achieve these speeds possible.

  In addition there is no limit of capacity on SATA interface you can buy what you want and have fun with the new HARD drive! :)

• Satellite P300 with two hard drives

  Hi all

  I have a Satellite P300 1 9, which seems to have two hard drives of 250 GB. A (Hitachi) is partitoned 'Vista C and E Data' and the other (Toshiba) is listed as drive had ' which is empty. If I right click on anything, say a document, and select ' send to ' I don't have the option to send to the D drive. How to store data on this drive?

  Thank you

  cheven.

  If your laptop has two hard disks, it clearly appears in Windows Explorer.
  The first HARD disk is divided into two partitions, and on the second partition, which belongs to the first HARD drive, you will see folder HDDRecovery (do not remove the second HARD drive).

  Deleting files is the same as on the withdrawal between the two partitions. It is the WXP/Vista basic know-how.

• need a laptop keyboard and hard drive HP product number

  Hi all!!!

  My laptop keyboard and hard drive does not properly and I need to replace the two points. but I do not know the exact number of the product of the keyboard and the disk hard drive.  A knowledge of the product number please help me.

  Product model: HP Pavilion g6 - 1011TU Notebook

  Product number: LQ893PA

  Thank you

  Migas

  You will find figures for the product here in the service of maintenance & guide for the laptop G6.  As far the hard drive will I highly recommend that you use SATA instead of SATA2 or SATA3 for the best compatibility with the interface of disk on the system board controller.

• Have a computer dell laptop. replaced the hard drive; tried to install my Windows XP and my product key is not accepted. I was wondering why and how do to accomplish this task.

  My dell laptop had the hard drive replaced.  My son, who knows computers, installed the new hard drive.  Then he tried to install my Windows XP Professional software - when it came time to put the product key #, it was not accepted.  It's authentic.  The product key is: * removed *.

  There no mention of this issue in section outages or other information provided in the booklet provided.  Can you help me with this problem?

  The license key and product type must match (XP Home vs XP Pro;)  (and OEM license vs the retail license).  If it's a Dell computer and you get the product key from a sticker on the case, then there is likely a version of Windows XP OEM this product key.  If you install Windows XP from a retail installation disk, then the types of licenses will not match.  You will need to use the license that accompanies the retail installation disc or you will need to contact Dell for an OEM installation disc to go with the license on your sticker case.

  HTH,
  JW

• Two hard drives - what to set the page file to?

  I have two hard drives, Windows is installed on C:, what should I set my page of the settings file for better performance? Hard drive space is not a problem, I have a 250 GB and a 1 TB drive, both are less than half full. I have 3.25 GB of RAM DDR2.

  I heard move the swap file on a second hard drive is beneficial, because the OS files and the page file could be consulted at the same time. Defining a very large page file or file page on both drives will hurt performance? What is a variable size compared to a matter of constant size?

  It shouldn't be noticeable performance difference if the swap file is bigger than "necessary".

  If your system can it take into account, it is considered generally to be a performance advantage to put the file on a different physical disk than the operating system is installed, provided the other player does not see many IO already.

  By using a constant size / fixed can eliminate fragmentation of the file page that can occur if it is sized dynamically.

  If you anticipate relying heavily on the swap file, maybe reconsider and add more RAM to the system, if possible, or upgrade to a 64-bit computer and the operating system that is able to handle more RAM.

• I want to recover the data on the hard drive using a laptop as a hard drive.

  Original title: Using a laptop as a hard drive...

  On a MAC, I can plug my laptop into my office with a firewire port to access the hard drive on the laptop without the OS being ran on the laptop.  Windows Vista has such a thing?  If so, how do you go?  The hard drive on my Windows laptop fails and we want to try and recover the data, by hooking it to a desktop as shown above with the MACs.

  Thank you in advance!

  Hello

  "There is no way to access the hard drive when there is no operating system and if the hard drive is connected terribly."

  However, you can remove the hard drive from the laptop and connect it to the office with a case of hard disk that comes with the USB cable.

  Reference:

  Space to grow:
  http://Windows.Microsoft.com/en-us/Windows-Vista/room-to-grow-get-more-space-by-using-external-hard-disk-drives

• HPE h8 - 1360t: the HPE h8 - 1360t can support 2 hard drives of 4 GB

  Hello

  the HPE h8 - 1360t can support 2 hard drives of 4 GB

  Intel Core i7-3770 CPU @ 3.40 GHz

  Product number: B4J27AV #ABA

  Motherboard

  System Board

  Manufacturer PEGATRON CORPORATION

  Product 2AD5

  Chipset Intel PCH Z75

  BIOS

  Seller FRIEND

  Release Date 02/07/2012

  7.15 BIOS Version string

  ROM Size 8.00 MB

  SMBIOS

  Version 2.7

  Currently, I have installed as primary

  Hard drive - WDC WD4001FAEX-00MJRA0

  Supplier from Western Digital

  Model number WDC WD4001FAEX-00MJRA0

  Marketed size 4 TB

  Thanks for all help

  applogies for the late reply.

  everything worked very well

  Thank you very much for your help and support

  Have a nice day

• If you have two hard drives, can you wipe the second and just use it as a storage device?

  If you have two HARD drives in a PC Windows 7, can you remove everything (including the System 32, Windows users, literally everything) in the second and still use his computer? All my programs on the first HDD would remain on my PC, but all the files of the second being scratched? I'm running out of space on my first HARD drive and need to know if I can keep the second as storage just pure.

  Thank you.

  Hey Elliot,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description, it seems that you want to delete all the data on the secondary hard drive without affecting the first hard drive operating system files.

  I'll be happy to help you with this.

  If the operating system (Windows 7) is installed on the first hard drive, it has nothing to do with the second hard disk. You can go ahead and delete all data without hesitation.

  Note: Make sure that you remove the data from the hard drive where Windows 7 is installed.

  If you want to reduce the number of unnecessary files on your hard disk to free up disk space and help your computer run faster, use disk cleanup.

  For more information, see the link.

  Delete files using disk cleanup

  If you have any other questions, feel free to let us know. We will be happy to help you.

• I have two hard drives 500 GB & 250 GB, 500 GB was drive C:, the two had switched, how I safely switch back?

  I can find two hard drives, but he did tell me that one is the 500 GB or 250 GB. Need to get my 500 to the C: drive.

  If you start the computer (start-> computer), you can see the drives with their letters of player sizes and how much space is used.  If your computer is running however, I would recommend against trying to move the letters because it is likely to make your computer unusable.

  Good luck.

• Can I have two HARD drives in my d7-1448 of the Pavilion notebook?

  Can I have two HARD drives in my d7-1448 of the Pavilion notebook?

  How do you know that one to replace or should I replace both?

  Hi, Bill:

  I like this one... (and so do a lot of other people if you read the comments).

  http://www.Newegg.com/product/product.aspx?item=N82E16822136280

  Paul

• Create new virtual machine of the model that have two hard drives in the different data store

  We do VM deploy automation with PowerCLI.

  There is already a model created with at least two hard drives to one side and each hard drive belong to difference datastore,

  In the model's operating system is Windows server 2008 R2 already installed VMware Tools and other software in the second (other than C: driver) driver

  We can successfully deploy a new virtual machine with this manually with vSphere client model.

  But when we try to make the deployment with PowerCLI, can not find examples of similar scripts in the document of reference,

  and we also google this question, still no similar question was found.

  Is this possible with PowerCLI? If it's possible could you give me some advice or an example of script, thank you!

  Best regards.

  I already found the solution.

  With the vSphere SDK .NET API, we can create the new virtual machine to the model

  Mainly used API listed below, sorry because I can not give the source code here.

  • VMware.Vim.VirtualMachineCloneSpec
  • VMware.Vim.VirtualMachineRelocateSpec
  • VMware.Vim.ManagedObjectReference
  • VMware.Vim.VirtualMachineRelocateSpecDiskLocator
  • VMware.Vim.ManagedObjectReference
  • CloneVM_Task

  For reference, you can take a look at this post and this post

  LucD , thanks for your help!