laptop to tv via HDMI connection

Similar Questions

• No sound via HDMI connection in adobe elements 14 trial first

  In the trial version of first elements 14 that the sound is not exported to my TV with an HDMI connection, I hear the sound of my pc as if it was not connected via HDMI. I have downloaded powerdirector, this works the HDMI sound... Y at - it nothing to do with this... ?

  Thanks for any help.

  Popis

  What operating system is involved with your 14 items first?

  Configure your desktop computer is fixed via HDMI to the TV or laptop with TV game as a 2nd monitor in a workflow bi-ecrans?

  Although I realize that you say that the other program has no problem with the HDMI TV configuration, how you set display in place

  a. duplicate

  (b) extend

  c. show the desktop only on 1

  d. show desktop only on 2

  e. no dual monitor, you work with a single monitor for a desktop computer.

  Have you explored editing Audio/preferences/Menu material ASIO input and output settings tab?

  One of your connections are of the type "hub" or just a straight HDMI cable from the computer to the TV?

  Is - this problem in all areas of the sound source for the timeline of the first elements or just with the file (s) and or a Premiere Elements project?

  Please review and then we'll decide what then based on the details in your response.

  Thank you.

  RTA

  Add on... I have a laptop connected via HDMI to a smart TV. Duplicate is resolved. And, I have no problem with sound appear to come from TV... I have affect volume in reading first elements chronology of remote first elements or the TV Volume control adjust Volume/pallet/tab panel settings. Thorough in trying to use both randomly.

• Re: Satellite A300-1MC - no sound via HDMI connection

  When I connect my Satellite A300-1MC on via connection receiver HDMI audio Yamaha in order to play music, no connection is possible, even without sign HDMI on the receiver is lit?
  any ideas?
  problem with the drivers or something else?

  This Toshiba document may be useful:

  + No sound via HDMI +.
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm

  The error is caused by the order of the pre-installed Intel display driver installation.
  The problem could be fixed by reinstalling the Intel Display Treibers V15.9.5.1502 or higher.

  Check it out!

• Computer Dell laptop doesn't detect the TV via HDMI connection.

  I have a Dell Inspiron N5110 with Windows 7 and a Samsung TV. Whenever I plug my HDMI cable, the only thing I see on my TV screen is No Signal. It is on the correct entry, but my computer still does not recognize the second monitor.
  I have connected my laptop to a front projector, and it worked fine.

  I had problems connecting my laptop before and then finished by needing a new hard drive... So I now have a new hard drive (cool!) but I can not determine what the problem... In devices, Graphics Manager, it says Intel(r) HD Graphics Family and Standard VGA Graphics Adapter. The other has a small yellow triangle with an exclamation point, but when I ask Windows to see if it's updated, it says that Windows has determined that it is up-to-date.

  Help, please!

  I had the same problem as you. Initially, I went to dell drivers

  http://www.Dell.com/support/home/us/en/04/product-support/product/Inspiron-15R-n5110/drivers

  video and downloaded the driver Intel HD Graphics 3000, but that wasn't enough. Yet once my HDMI has not been recognized. I had to also download the same file, the nVIDIA GeForce GT 525 M Graphics Driver (it was my graphics card, if you have the ATI card you download driver ATI). When I installed the last, I was ready to go... Download and install these two drivers and you will solve this problem!

• Unable to connect laptop to TV via HDMI cable

  Original title: unable to connect

  I recently put HP G-62 - b51SE.I tried to connect to my HDMI TV using the HDMI cable but nothing works. Is there a way I can connect. What settings should I do in order to make the display appear on television. I have windows 7 ultimate.

  Hi Lovemicrosoft,

  1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.

  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  Link to view:

  What should I know before adding TV tuners to use with Windows Media Center?

  http://Windows.Microsoft.com/en-us/Windows7/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center

• I'm unable to change the video settings on my TV connected to my computer laptop nv55s Gateway via HDMI.

  I have a laptop Gateway nv55s and I used a Slyvania 32 '' lcd Tv and my secondary monitor via a Hdmi cable. I was out of my house and when I came back the video has not been more appearing on my TV. I went to change my video settings and it detects my TV, but it does not reproduce the image? What could be my problem?

  P.S. I'm not very tech Savy.

  Original title: gateway HDMI NV55S detects the TV but not photo duplicate

  I tried all 3 ports on my tv, but nothing has worked. I started messing around with my wireless keyboard and the keys of my laptop keyboard. Also twirling some cords on the back on my TV and then it worked. Don't know what I was doing, or how I did, but now he works once more. Thank you very much for your help.

• Re: Satellite P300 - no sound when connecting computer laptop to TV via HDMI

  Hello

  I searched online on several sites and read the messages on this forum too but still could not find a solution that works.
  I plugged in the cable and instantly got video but no sound. This cable works fine with my PS3.

  I tried to set the audio device by default both HDMI and S/PDIF and reboot after each time, but it doesn't work!
  Also, when I choose HDMI as device and try clicking on the Test, I get an error message saying "cannot play the test tone".

  I checked for updates for the driver through Windows and it is said that there are no updates. I have a Satellite P300 laptop.

  Anyone have any ideas?

  Thank you
  Jen

  This means you have a perfect television image after activating the HDMI port but the problem is its only?

• HP laptop Toshiba LCD TV via HDMI connection

  Sometimes, I try to connect my laptop HP G70t for my Toshiba LCD TV. I see that if I close the laptop the TV picture also disappears. What should I do to have the TV be posting video, even when the laptop is closed. Note: I should still be able to use the pout wireless keyboard. Any help?

  When you close your laptop, in that it sets the hiberntation system, the screen turned off, no sound and wireless

  so I think wouldent it would keep putting on TV then, either go into the system setup and set the screen close to the normal running

  no implementation of Hibernate, or keep the laptop open

• Video driver problem - no TV via HDMI connection

  Hello

  Seems that when I upgraded my display driver, whenever I wake up from my laptop from sleep he does not recognize my TV properly - video plays correctly on TV but not audio. Only to restart the laptop the problem (re - insert the cable doesn't help).

  I have install driver:

  I tried reinstalling the driver, did not help.

  Help please

  Hi LOADSTONE007S,

  What is the exact system model? What is the current operating system installed on the system? The issue started after the recent windows updates? What is the exact model of the TV? What version of HDMI cable that you use? Have you tried another HDMI cable? Have you tried to connect to another monitor / TV?

  If the system worked very well before, and then perform a system restore to restore the computer to an older version point where it worked very well - http://bit.ly/1JEw2ov

  Update the BIOS - http://dell.to/1n3X2po - enter the service number and download the BIOS update and restart the machine and check.

  Reinstall the video driver from the vendor's site. Look for the driver model in device-> graphics cards Manager. If you are unable to find the link, send me a photo of graphics cards in Device Manager and I'll provide links to the vendor's site.

  Create a new local administrator account and check - http://bit.ly/1JoFhcw

  In addition, please click my username DELL and write me a private conversation with the service number and your contact information (name and Email) for files.

  Let us know if you have any other questions.

• laptop to plasma via HDMI

  I have a Dell Inspiron 17R connected to my Panasonic 50 '' plasma and never had a problem before (I have seen on TV the same thing I saw on the laptop), but today I turned on my laptop to show a continuous, active plasma, the signal went on television, but on the laptop screen went black.  I got scared, so I've turned off the laptop and restarted, then went and changed something on the graphics options, hoping that I would get back everything as it was, but didn't and now whenever I connect the laptop to the TV the laptop screen is completely black, I unplug the HDMI cable and returns the image of the laptop.  I have tried to change the options on the Intel HD graphics card (which, for some reason, is in Spanish) does not.  Is my graphics driver obsolete?  Why if I ever had a problem before I have now?  Can anyone answer?  What gives?  Thank you.

  I have a Dell Inspiron 17R connected to my Panasonic 50 '' plasma and never had a problem before (I have seen on TV the same thing I saw on the laptop), but today I turned on my laptop to show a continuous, active plasma, the signal went on television, but on the laptop screen went black.  I got scared, so I've turned off the laptop and restarted, then went and changed something on the graphics options, hoping that I would get back everything as it was, but didn't and now whenever I connect the laptop to the TV the laptop screen is completely black, I unplug the HDMI cable and returns the image of the laptop.  I have tried to change the options on the Intel HD graphics card (which, for some reason, is in Spanish) does not.  Is my graphics driver obsolete?  Why if I ever had a problem before I have now?  Can anyone answer?  What gives?  Thank you.

  Update your graphics card driver. Visit the manufacturer's Web site to download and install the latest version of the driver. Once to ensure that the resolution of the laptop match the resolution of the plasma tv.

• w2207h fails to audio playback on the speakers via HDMI connection

  
  

  Hi Big_Dave, thanks a lot for your support; I really appreciate it. Considering the efforts related to bring the system back to day one, I think I'll stick with the current configuration being re - install again the whole system like birds with firing ground-to-air missiles!

• Satellite T110 - 10 X - multichannel sound (5.1) via HDMI?

  This laptop plays through its HDMI 5.1 channel sound? I want to use like "movie player" for Full HD movies, but need to know if I'll be able to use multichannel audio via HDMI connected to the AV receiver.

  Does anyone have experience with this?

  Hello

  Theoretically, it is possible to have the audio 5.1 via a HDMI cable but your s AV receiver must support this feature. Therefore, you should check the user manual.

  By the way: I founded to interesting articles on the audio output:
  http://APS2.toshiba-tro.de/KB0/TSB5400YZ0005R01.htm
  http://APS2.toshiba-tro.de/KB0/TSD57013M000UR01.htm

• Satellite L650 - HDMI connection for external monitor

  I've linked the laptop to my Sony LCD TV via HDMI, no problem. I have a (Acer, 24-inch) LCD monitor that has a HDMI port also. I used it to play ps3 and xbox360 via HDMI connection, no problem. I have two lines HDMI 1.3. The two lines are working without any problems.

  However, when I connect my laptop to my LCD Acer just external LCD monitor can t work properly. I can barely see what is display on the monitor, very snowy. It's hard to describe. I took a photo but don't know where to download it here.

  I tried both HDMI lines, but both failed. I tried to change a few settings in the laptop, but nothing makes any difference. I'm looking for the driver for video card on the Web from Toshiba website and found that my current license is updated.

  I'm not a tech geek, but I think that I don't know something on the computer. Am I missing something here?

  Guys (and girls), please throw in an idea (tooth tell me to check if the connection is good, I don't already).
  Thank you

  Hey,.

  If you connect your laptop to external monitor and press the FN + F5 key combination what happens exactly? Pressing the FN + F5 key combination shows different options and you should test with external monitor only (not the clone image). If you work on external monitor doesn't do this work?

  In addition, you must connect the devices before starting their.

  Also, take a look in the BIOS and try to load the default settings. Make sure that that the HDMI cable is connected before starting Windows and check the status again.

  By the way: what operating system are you using exactly?

• Pavilion TS 14: Projection TV via HDMI cable

  Bought the laptop in 2013, found I couldn't connect the laptop to TV via HDMI cable, the HP support team fixed by using remote access to my laptop. I recently installed and uninstalled Windows 10 and have found that I have the original problem of not being able to connect to my TV again.

  No one knows what to do to fix it. I have prints of what HP has done to fix previously, but it did not work.

  Any suggestions?

  Hi Sparkles1,

  I just tried to log in again and luckily it works now. I am very happy and relieved that this problem is corrected himself, as I did nothing.

  Thank you for your help.

  @claudsmum

• Can I run a VIZIO M260A HDTV as a second monitor via HDMI?

  Have a GeForce NVIDIA with DVI and HDMI ports.  Primary monitor is connected to the DVI connector.  VIZIO via HDMI connected, but it does not receive a signal, even if the NVIDIA Control Panel thinks that it is connected.

  Hello

  Try another HDMI cable or test the HDMI cable with other devices compatible HDTV.

  BTW, what is the primary monitor for resolution?