No sound via HDMI connection in adobe elements 14 trial first

Similar Questions

• Re: Satellite A300-1MC - no sound via HDMI connection

  When I connect my Satellite A300-1MC on via connection receiver HDMI audio Yamaha in order to play music, no connection is possible, even without sign HDMI on the receiver is lit?
  any ideas?
  problem with the drivers or something else?

  This Toshiba document may be useful:

  + No sound via HDMI +.
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm

  The error is caused by the order of the pre-installed Intel display driver installation.
  The problem could be fixed by reinstalling the Intel Display Treibers V15.9.5.1502 or higher.

  Check it out!

• Can I send sound to the new apple tv to airplay speakers and around things sound via HDMI to the projector?

  Can I send sound to the new apple tv to airplay speakers and around things sound via HDMI to the projector? My projector has HDMI but no audio output. Thank you.

  You can set the audio output to the airplay speakers in settings on Apple TV

• When I connected to adobe photoshop for the first time with my adobe ID and password on my lap top, it couldn't connect and gave me "error 400".  What does that mean?

  When I connected to adobe photoshop for the first time with my adobe ID and password on my lap top, it couldn't connect and gave me "error 400".  What does that mean?

  Hello

  Please visit Adobe Creative Cloud connection errors

  Hope that helps!

  Kind regards

  Sheena

• Adobe elements 13 trial cannot be found anywhere?

  Adobe elements 13 trial cannot be found anywhere?  Is is interrupted?  The FAQ says that it is always available.

  Hello

  Have you tried this page?

  https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-10-11-downloads.html

  What operating system?

  Brian

• I'm registered for adobe elements ver 3 first. . Any body know where I can find down load? Or y at - it a newer version that I can download that my serial number will work with?

  I'm registered for adobe elements ver 3 first. . Any body know where I can find down load? Or y at - it a newer version that I can download that my serial number will work with?

  There is no download available for version 3 I know - version 9 is the most ancient available offered by Adobe.  Serial numbers are valid only for the version that they were purchased for.

• Qosmio G50-129 no sound with HDMI connection

  Hello.

  I have a Quosmio G50-129. Recently, I tried plugging it into my Sony Bravia LCD TV via the HDMI connection.
  I have video output but there is no sound on the TV.

  I tried to set the HDMI as audio device as default and the sound level meter in the sound properties panel appears to show activity, but nothing comes out.

  Can anyone help?

  Hello

  I m not Qosmio G50 owner, I only have the small F50, but it must be identical to yours I think. So first of all, I must say that I never had a problem with the HDMI connection. Everything has worked perfectly since I used the HDMI connection, the first time

  In any case, if you connect your laptop to an external monitor or TV using the HDMI connection, connect the cable first. After this power on the TV and select the HDMI input right channel. Then go on your laptop and if you press FN + F5, you can change between the different options.

  Normally the HDMI output is automatically set as the default audio device, not to follow these workarounds with good screenshots:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

• Satellite P300: no sound via HDMI on HDTV

  Hi all

  I get video but no sound when I connect my laptop to my Toshiba HD TV.
  I looked at the settings, but they seem to be ok.

  Any help would be great.

  You must follow these steps if you connect a HD TV to the laptop:

  1. fix a TV to the laptop via HDMI, while both units are in a * "power" off * State.
  2. turn on your TV first, then the laptop.
  3. laptop should automatically detect the HDMI connection and video output can be seen via HDMI to the TV.
  4 launch Sound (start (Windows logo)-> Control Panel-> hardware and sound-> Sound)
  5. on the playback tab, select "Peripheral digital output (S/PDIF)" and click on "Set as default"
  6. click on 'Apply' then 'OK' to close his
  7. the sounds played on the l should now also be heard on the TV (keys Fn + ESC or the volume dial can be used to cut the sound to the computer)

  _Please Note: _
  1. peripheral digital output (S/PDIF) installation default through Volume mixer does not output digital audio via HDMI.
  2 HD DVD-video can only be displayed on the LCD of the computer bulletin board or on a television connected to the output of HDMI port. HD DVD Video cannot be displayed on televisions connected to the S-Video port or an external display connected to the RGB connector.

  Hope this helps

• HP pavilion dv6 3131tx no sound via hdmi

  I met an audio problem that only started since this morning, but is very frustrating, I have my hp pavilion dv6 3131tx windows 7 Home premium, connected to my TV via hdmi, it worked perfectly until this morning where the audio stopped working through the TV, hdmi output disappeared in the sounds menu, I tried the following :

  reinstall and update the drivers audio, update display drivers and chipset drivers, try the different hdmi ports and cables (to make sure it wasn't a bad cable) as well several solutions in the forums, my problem is that the hdmi output does not appear in the menu sounds and cannot be selected as default device How can I get that back?

  Problem solved, high definition driver Amd was automatically disabled somehow he was reactivated by going to the Device Manager and the bottom right click on amd/driver high definition codec and pressing enable (note that there are 2 of them, a permit and a disabled person) also allow many of them and YAY dolby digital surround sound works again! After 2 days of hard to find an answer I did it myself >. >, but still having a problem where my ATI / AMD drivers will not be updated due to a conflict between the hp hardware and the ATI Radeon Hd 5650-. -.

• No sound via HDMI after upgrading to windows 7

  I upgraded a sony Vaio VGX-TP3Z-B from vista Home Premium to Windows 7. I got a LCD TV Sharp that the monitor is connected via HDMI everything worked perfectly before the upgrade, but after I can't get sound through the HDMI to the TV, I can plug the speakers into the PC, but the sound is not as good as the way to TV.

  On the settings of the sound output device (HDMI) theDigital is shon as not connected.

  I checked for updated drivers and those installed seems to be later and Sony have no support for upgrades to Windows 7.

  I'm really stuck and frustrated, I hate to be beaten, can you help me?

  Dave

  Hello
   
  You can try the steps below and check if the problem is resolved.
   
  (1) start Windows Media Player on any video file.
  (2) make sure that you can see the video and sound on the laptop.
  (3) the right of the mouse, click on area of Windows Media Player (video)
  More options-> Devices tab-> speakers select from the list of devices-> click on the properties button
  (4) in the pop - uo-> "properties of the speaker" modal window select the audio device: => select "Digital Audio (HDMI) (2-high definition Audio Device)" (on the laptop)
  (5) save all window
  (6) close and restart Windows Media Player
  (7) connect the cable HDMI and swith on the TV for audio HDMI
  
  Now the works video + audio works perfectly on television.
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound via HDMI after upgrading Vista to Windows 7

  Data sheet:

  HP Pavilion Elite m9515y

  Sound:

  Realtek ALC 888 chipset s

  Video:

  GeForce 9600 GS

  With the original operating system Vista, I could right-click on the speaker in the taskbar and select the playback device and make the default output HDMI.  I erased my drive and installed Windows 7.  Now under the playback devices I have not the HDMI option.  According to me, speakers, headphones and Realtek Digital Output.  Sounds works fine with speakers or headphones.  I tried to install the latest audio and video of Nvidia and Realtek drivers.  I tried to go back to the original Vista drivers.  Nothing works.  At the moment I use a stereo cable to connect my PC from the headphone jack on my TV, but wish that I could get good audio HDMI works with Windows 7.  Anyone else having a problem with these chips sets?

  PROBLEM SOLVED!

  The motherboard has two S/PDIF outputs.  A pass by a connector and the wire internal graphics card HDMI.  The other goes to a RCA Jack on the back of the computer.  During normal operation of Vista, the driver probably did some function to determine if the HDMI connection is used, so that it does not disturb the owner of a system without card HDMI with this audio port additional inaccessible appear under their playback devices.

  Unfortunately, the BIOS or the audio driver or video card driver require an update for Windows 7.  No matter what function is used to detect if the HDMI connection is present does not, if ever it comes in the playback devices.  I hope someone at HP or Nvidia, Realtek is tuned for this.

  Until the corrected drivers or BIOS, I found a coaxial wire thin with an RCA connector on one end and who connected to the Digital Audio output on the back of the computer, transferred this thread in my machine, then cut and solder this wire over the graphics card HDMI input S/PDIF.  It seems stupid, but works like a charm.

  So ends 3 days of aggravation.

• Question T540p Ultradock sound via HDMI & fwdphb03 do not launch

  My problem is that when I am connected with the t540p to the ultradock this noise comes from the local speakers instead of via the HDMI cable if the monitor and then through my external speaker which are way better.

  Audio playback devices I wrote: 'High definietyion Audio Device not connected. So I tried to connect directly via portable computers mindpoit for the monitor and then it worked. But as soon as I have it plugged into the docking station, which is connected to the same monitor via the DVI then the result is not plugged.

  So I tried the station dock firmware upgrade by downloading the latest firmware fwdphb03, and it does not start in spite of being connected to the docking station and using an external monitor and correctly connected.

  Any ideas?

  Thank you

  Sp1k3

  FIXED;

  So I removed the NVIDIA drivers and all its software. I had to remove the reboot, remove once again, and then restart. Then and only then, I installed the latest drivers for lenovo download site and then the audio via HDMI becomes visible, and it works again.

  I've yet to update the firmware of the docking station. If anyone can help with this?

• Pavilion e040us No. sound via HDMI to TV

  When I used the sound from the laptop would sometimes come through the HDMI to the TV. Now he doesn't. When I look at the reading devices there is no HDMI, but only "speaker/HP" reading I went in the DTS audio Panel, which lists only a playback device. I also right click in the playback devices to show all disabled or disconnected devices and there is no other.

  Portable speakers or speakers plugged into the outlet work very well. The video on the HDMI connection also works very well.

  So far I updated the BIOS to the latest version and also uninstalled the realtek audio driver and installed the latest driver from the HP website.

  None of this has caused her to work through the HDMI or even a HDMI device to appear. Please indicate how this can be resolved that he used a lot of time. Thank you.

  This will depend on the configuration of your laptop.

  If your laptop is a graphical solution of AMD\Intel, then reinstalling the driver Radeon AMD\ATI softpaq should make the HDMI audio device become available again.

• No sound via hdmi

  Hello

  I have a hp dv9000 with hdmi output.  I signed up for Netflix and connected the laptop hdmi cable to our TV.  Use of IE, I started a film and the video is very good.  The sound of the film is coming through the speakers of the laptop, but not the tv.

  Curiously, the windows sound is coming through the tv speakers and not the laptop.

  How can I get the sound of the movie to play through the TV?

  Hello Bulverde,

  By default the Vista transmits no sound on HDMI output.  To change this to change the settings in the control panel.

  Note: This will turn off sound from speakers or normal audio output on the laptop.  To get that back, you will need to reverse this process.

  1. click on the button 'Start '.

  2. click on "Control Panel."

  3. 'Control Panel Home' click 'hardware and sound '.

  4. where it says "Sound" in green letters, there are three options below that are in blue, click on "manage Audio devices".

  5. This will bring up a window titled "Sound".

  6. on the tab 'Read' it has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.

  7. it should now check this option box.

  8. the sound should play through your HDMI connections to the TV.

  You can also see the article that will give you more information on this.

  http://support.Microsoft.com/kb/953500

  You can also watch the thread below in which another user had same issues and try different possible steps listed:

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/28691f82-610e-4F01-be2f-b2ced7cca645/

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• laptop to tv via HDMI connection

  When I cnnect my laptop to my tv via hdmi cable nothing shows... are thereany settngs I need to change or ways about to choose to show on TV? my old office hp on the tv works but can't get my brand new laptop for work.

  Hello @teamkylissa,

  Welcome and thank you for using the HP's Support Forums.  So just to be clear.  When you connect your computer to your new HDMI cable laptop to TV, you get no video on the TV screen.   Well, this is something that I totally understand because it happened to me.  There are a few things to check the extent of setting to go and here is a link that you can check to see if it solves the problem.

  Connect your PC to your TV via HDMI (and more)

  If this is not enough and I hope that he does now.  If you can, please provide me with your information system as much as possible.  Offshore, we can start with your model number and product.  Use this link below to help you find this information.

  How can I find my model number or product number?

  So, I need the operating system that is running your laptop. Here is a link to help you find that information.

  Operating system Windows am I running?

  I hope to hear from you.  If the first link did not help with the other information that I asked for, we would be able to get to the bottom of the matter.

  Thank you and have a nice day.