Laptop turns off always with new hard drive?

Similar Questions

• How to reinstall Vista (using the HP recovery disk) to my laptop HP that has a new hard drive

  The hard drive failed on my HP laptop.  I bought a new hard drive (not HP) and loaded the HP recovery disks, but a screen will appear that says it is not compatible.  Can I use this new hard drive, or should I buy a hard drive for HP?

  I looked at a few tech forums and from what I can tell, HP crashes their system you can't use hard disks of third parties.  To make a third hard drive to work (depending on the online forums), you will need to bring a technician certified in HP in order to run a utility of DMI (?) and "tattoo" the hard drive for HP use (estimated at close to $45).
  I can't find a technician certified in HP in my area and Geek Squad said that they can do it more... my laptop is now an expensive paper weight, or there at - it another option (short of spending hundreds of dollars on the purchase of a new Vista + MS Office license)?

  Hello

  posters have reported problems with the use of a replacement hard drive not HP, etc.

  as you say you know the answer to your problem buy a new hard drive from HP and then reinstall using their recovery disks

  If you have problems with the HP recovery process, contact the manufacturer

  It's their recovery process not microsofts

  HP support

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  HP support forums

  http://h30434.www3.HP.com/

• Blue screen error: 0x0000001a when using system to restore with new hard drive disk

  original title: blue screen error when you use the system disk to restore with new hard drive

  I bought a new hard drive to my computer because the old one gave me a bunch of error messages on screen blues. I installed in the tower and tried to use my restore and system recovery disks that the manufacturer has given me, the process has got to the last disk then asked for the system once again restore disc, and then began to load the last steps and went to blue screen error. I don't know what to do, I mean it's a whole new drive hard, so where could the error come, theres nothing on the hard drive because I have not yet used really, yet. Help, please

  I have finally fixed the problem myself. The problem was that one of the sticks three memory was bad and the only way I could test this error. I took two sticks a left, used disks I had and was able to restore my computer, then I put a stick, turned on the computer, had no errors so I let him, so I put the last stick in and com immediately on, I had the Disconnections: memory management and that's when I knew that the last stick of memory was bad I took it back and now my computer works well and I can't buy more memory for not too. So if someone gets this BOSD error on memory, I'd say 8/10 computers have bad memory (not a number). If youcannot run the tool of diagnosis of memory like me then I would suggest to do what I did with the trial and error, it was the only way to understand the problem. Thanks for your help

• How to reinstall Vista on PC Toshiba laptop with new hard drive?

  Hard drive from my Toshiba laptop of sisters died as well as its internal fan and she asked me to fix it, well I got a new hard drive and replaced the dead with a new internal fan and works perfectly fine with a Linux Live CD. However, she had previously Vista Home Premium installed on it, and there was no installation CD, just 2 recovery discs. Now, I was wondering where I could get an iso image of vista UNACTIVATED so I can use his legitimate product for her key. (I also have a week to achieve and I repair to other computers as well, which are not a problem, so time is of the essence)

  Also, I have no money and can't afford to get a Best Buy installation CD, as the operating system has already been installed on the laptop/OEM computer. If that would be legal so getting an online and burning a black CD and use it to get Vista on this new hard drive of his?

  In addition, I know how to install its drivers, and upgrade from SP1 to SP2 via Windows Update Manager, all I need is a vista installation CD Home premium to get his computer upward and execution of how she wants to.

  * original title - I need a Vista Home Premium Installation CD Unactivated *.

  Thanks for the quick response, so you're saying I haft to buy an installation CD to install legally?

  Hey mikethedj4

  None

  I never said you had to buy a dvd installation anywhere in my answer

  I said that there is no free and legal download

  read all of my answer

  I advised you to start from the 1st recovery disk and if you have any problems contact toshiba at the link I suppied you with

  or follow the rest of my advice on borrowing a microsoft dvd vista and using your product key with him

  what he may not know is that microsoft vista dvd contains all versions of vista

  This is the product key that installs the correct version of the dvd

  There are 2 microsoft dvd vista a 32-bit and one for 64-bit operating system

  most of the computers unless asked when bought normally come with the version of vista 32 bit

  Walter, the time zone traveller

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• How to install Windows without recovery disc - Satellite A660 with new HARD drive

  Hey,.

  Portable 500 GB HDD of my friend Toshiba Satellite A660 seems to have died.
  I tied him to my laptop on a sata dock and runs a data recovery program because nothing has been saved. The recovery takes forever, however, and she really needs his computer to work.

  Because the hard disk may be damaged in any case, I am considering buying a new hard drive and install in the Toshiba.

  How can I do this without a recovery disk, though?
  The old drive was a partition recovery on it, I think, but this seems useless with a new drive.
  Operating system is Windows 7 64 bit home edition.

  The product key is on the bottom of the laptop.
  I live in Turkey and so I don't think there is a Toshiba store is close.
  There are individual computer stores, so I'm confident, I can buy a new internal hard drive (I could find the sata dock here), but he must know what to do to install the software, etc.

  Thank you!
  Chris

  > How can I do this without a recovery disk, though?

  You either have the recovery disk or you are going to install the system using the Microsoft Windows disk.
  The necessary drivers are in internet on Toshiba UE page.

  The recovery disc can also be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Will be produced recovery disk works with new HARD drive?

  Hi guys,.

  HARD drive failed the other day so replacement is on the right track.

  Always the product recovery disc, it will work on the new hard drive or is mapped to the old cd?

  Thanks in advance!

  Hello

  Of course, the recovery disc will work with the new HARD drive.
  It s not severe as a new HARD drive. The recovery disk it reformatted at first and install the operating system, drivers and tools

  Simply said, you will get the same software as on the first day of purchase.

  See you soon

• Activation problem with new hard drive on another computer.

  When I upgraded to Win 8 on my pc, I decided to install my copy of Win7 on my computer laptop girls as well as an upgraded HARD drive. As we had all two Dell Inspiron Laptops and his laptop was in use, I installed the new HARD drive in my laptop and proceeded to the installation and updates at my ease.

  I made the mistake to activate the Windows 7 successfully while the new HARD drive in my laptop.
  My problem is when I mount the HARD drive in my Dell laptop, it took re activation of girls and he does not accept the key.
  Can anyone help?
  Thank you, Simon
   
  Original title: the woes of Activation

  14 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After you upgrade, you can no longer use the software upgrade of.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  You can purchase a license upgrade and convert the license for use on the new system:

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

  Microsoft Windows 7 Ultimate - full version

  Full version - Microsoft Windows 7 Professional

  Version upgrade - Microsoft Windows 7 Professional Upgrade

  Version upgrade - Microsoft Windows 7 Ultimate Upgrade

  Version upgrade - Microsoft Windows 7 Home Premium Upgrade

  Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)

  When you get the license for the corresponding edition, follow these steps:

  Press Windows key + R

  Type: slui.exe 3

  Press enter

  Enter the new product key, and then click next to activate via the Internet.

• HARD drive failed - attempt to recover with new HARD drive

  Hello

  My wife & I have the exact same model laptop computer Pavilion dv6, its hard drive has recently failed the test & stuck on the preparation of repair automatic screen

  If I create a my laptop recovery disk & load with a new hard drive installed on his laptop that work or are unique to each laptop recovery disks?

  Thank you

  Hello

  Recovery disks read one "tattoo" on the chip for the bios to make sure that they are used on the correct machine, however as long as the two laptops are identical (that is to say that they have the exact same material and came with the same version of Windows), then the disks created on your laptop should also work on machine of your wife.

  Note:  When to replace the HARD drive, choose a disk of the same capacity (or slightly more is okay) as the original - installing a drive which is lower in quality that the original often causes problems with the recovery process.

  Kind regards

  DP - K

• Qosmio X 500-warranty with new HARD drive?

  I purchased a Qosmio X 500 last month (warranty: 1 year)

  If I change my hard disk and install my own Windows 7 on it, I lost my Toshiba 1 year warranty?

  Thank you!

  Hey,.

  Don t be to worry about this! You will not lose warranty if swap you the HARD drive and install another operating system. These easy updates as HARD or RAM drive poses no problem, but don t disassemble the whole laptop.

  By the way: If burn you the Toshiba Recovery disk, you can install the Windows 7 preinstalled on the new HARD drive too :)

• Satellite A20-S103 - crackling noise with new HARD drive

  Hello together

  I upgraded my laptop A20-S103 with a hard drive Western Digital WD2500BEVE 250 GB running under Windows XP Pro.
  Since then, I have problems with the sound and the movement of the mouse when the CPU usage is high.

  Up to 50% of its use, works well but before I crack and mouse sticks and made jumping movements.
  The BIOS and drivers are updated to the latest versions of Toshiba online.
  After awhile and a lot of research, I got also the HDD running in DMA mode with the IDE4008.exe ALI tool isn't that hard drive is running in PIO mode.

  In addition, I think that the speed of the hard drive is low when the CPU usage is high.

  Please also read http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=89990𕾆 that is showing that I'm not the only one with this problem.

  Anyone know a solution?

  I agree with Akuma. You should try to update the BIOS and drivers from the chipset and see if it works or not.
  It's worth to try ;)

  The two you can find here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Y480 - laptop does not start with attached hard drive enclosure.

  My laptop started clicking and will boot LAN, so I opened it and looked at the hard drive. All seemed well, it wouldn't be fair to start. Then I removed the metal casing around it and stuck the drive in. Everything started normally. Chkdsk shows nothing wrong with the hard drive, and I'm not sure why remove the dressing would affect startup. All the thoughts/solutions?

  Blue... temporarily parts of the sponge to keep the HARD drive in place.

  and if your Y480 is still under warranty, can consult a Support technique Lenovo...

  http://support.Lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613

  Good luck... Zehn

• Performance index Windows CPU drops with new hard drive installed on Windows Home Premium 64 bit.

  Hello world. I have a Toshiba laptop with Win 7 Home Premium 64-bit. 1 GB of GPU, 6 GB of ram, Intel i7 Q740 1.73 GHz. operating system has been pre-installed.

  The old hard drive was 600 GB 5400 RPM 8 MB Cache. The new disk of 1 TB 7200 RPM 32 MB Cache. With the old drive the cpu had index of the 7.1. With the new disc, he fell to 5.6. all the other components even rated the two discs. Both discs have a 512th form. Searched everywhere for an answer and would like an answer, cause im very curious and puzzled. Health perfect new drive using disk setiniel and crystal HD... info old drive had bad sectors, but cpu always valued at 7.1. If someone can answer, I would be very grateful.

  SV

  WEI is a completely arbitrary number and because it has been eliminated in the 8 win & win 10.  I would not be concerned about the number unless your computer is actually slower.  Your hard drive has nothing to do with the rating of the CPU.

• I have a G4 laptop.  I put a new hard drive in it?

  I have a G4 laptop in very good condition, but there is very little space on the hard disk.  Can I put a new one in it?

  Yes, although the effort can be called "Difficult" due to other elements

  in the path before the actual task is completed. Not only the wires or cables.

  the screws are different lengths and must therefore be ordered so that you can

  keep track of their investment for better.

  Replacement of the disks hard ATA/IDE rotation is more difficult to obtain, and

  a better alternative is a product available (example) OWC

  It is a Solid State Drive. Faster, the performance of the system greatly improve

  and consumes less energy. An example of 60 GB is here for ATA; they have other:

  https://eShop.MacSales.com/item/OWC/SSDMLP060/

  Examples include when above is also presented on the website page

  is a rotating disk hard of 60Go, much less expensive. does not improve

  performance, as does an SSD, especially if you are using Leopard 10.5.8.

  https://eShop.MacSales.com/search/?q=iBook%20g4 & filter.catidpath = 4081

  Instructions on the replacement hard drive with additional detail in the commentary to the user

  section, located at the iFixit repair for iBook G4 guide page. See your:

  https://www.iFixit.com/device/iBook_G4

  Good luck in this case!