Large empty lines

Similar Questions

• Small square boxes, which appear on empty lines (UPDATED) - the question is, how to get rid of them?

  As for my display name "all I tried were in use"-when I registered on the Adobe site to use the Lab browser, I tried something like 10 or 12 user names and finally gave up and is gone with ' all I tried were in use "-my name is Bob

  ------------------------------- UPDATE --------------------

  The problem, small square boxes showing on the lines Freetext tool reviews, is not limited to blank lines, as I originally reported here. These boxes are appearing at the end of each line. It does not matter whether or not the line break is hard or soft, if the line is empty.

  Please read the original message, taking into account the fact that the problem occurred at the end of all lines.

  Also - Here's a screenshot of part of a comment area, showing the square lines. I didn't show the entire box because the material above the area I'm showing is a tad private or confidential. Here is the picture showing the boxes - note that there is no box at the end of the last line in the comment.

  
  --------------------------------------------------------------------

  -Original message-

  We have a copy of Acrobat 5.0. and so far he has done what we need, which is not much more to add bookmarks, links, and some retouching. I know it is very old and I know that things are changing. I hope that this has nothing to do with the version we use. I think it is a problem of compatibility if this is a problem with the newer versions of PDFs with reader 'edition' with 5.0.

  I have small square boxes appear on empty lines. (read my update above -boxes are at the end of all lines, conditional jump or jump) )

  I'm a programmer (37 years and more and more aspects of the processing of data) and I decided to learn PHP programming "language" to add some treatment of some of my web sites on the server side. So, I found a pretty good php to PDF manual and would use.

  I quickly found that the PDF didn't have one link and no Favorites, so I've been adding them as I search for a particular topic. I am also add comments and notes to document things not in the original manual or add comments that would help other programmers (who know other languages) to fit like the PHPs think - for example: in all the other languages I know (perhaps two dozen) to get rid of a file, 'delete you '. In PHP "unlink you" it.

  I added a lot of comments and notes like that and when I view the PDF in Reader (on this computer I 9.4.2) I see little boxes square on empty lines. The lines were created when I pressed ENTER twice to insert a blank line between paragraphs. (again, read the update at the top of this message - boxes are at the end of all lines, conditional jump or jump)

  How can I get rid of them?

  They are not present when I open with Acrobat PDF, only when I use an Acrobat Reader.

  They are also not present if I look at the comments using the comments navigation panel - in other words, they always show on the page, but they do not show in the copy of the comment displayed in the navigation panel.

  They are not present in the Notes or when I use one of the shape tools (square, circle or line tool) to create notes. They are no longer present in the Comments of Freetext tool

  They clearly show where there is a line successive characters feed/carriage return - but how can I get rid of them?

  I JUST THOUGHT of SOMETHING - I realized that I had not printed the pages on which I placed the comments and I was wondering if the boxes appear when you print the PDF file with reader - they don't. They are not present if I use Acrobat, not a reader, to print the same page.

  You can provide any assistance will be greatly appreciated.

  Please don't tell me to get a newer version - an expense that is simply and completely out of the picture. For us, it is a depression, not a recession - we are independent and our businesses have been severely hammered since 2006 - we are at about 1/4 of our profit before the big players trashed the economy.

  Bob

  P.S. Do you know that you can have a heart attack without pain in the chest, shortness of breath, or left arm pain? Well, you can! I had two and one almost killed me because I had no idea it was a heart attack. You can read about it here first one. Convey this, it could save a life.

  My second heart attack took place October 4, 20112 - he started, about 03:15, as did one, with a headache. It turns out the implanted stent in 2002 had been completely clogged by too many cultured tissue. The doctor put another stent inside one.
  

  Problem solved - it is a police problem. Apparently Acrobat cannot manage specific fonts and it is best to stick to a very small selection of font - Arial, Helvetica, Times Roman.

  I have not test a large number of fonts. If I do, I'll post there results here.

  Bob

• iOS 10 calendar widget shows empty lines

  IOS10 running on an iPhone 5s.

  Occasionally (not always), the calendar widget will display blank lines instead of the tests.

  for example, there could be 2 tests and 1 bday to show, but the widget will show 2 empty lines and a 3rd with just the icon bday, but no text event in one of them.

  

  3 empty lines reproduced above, match 3 events in 3 different calendars.

  I noticed that if I try to type in the focus area (just make it appear) and make disappear immediately, the widget will not re - make and events text will display correctly.

  Anyone else seen this?

  Hi 0 - ing.

  Thank you for contributing to the communities of Apple Support.

  It seems that your calendar widget does not display the text of your events at the start. Let's try some troubleshooting to see if we can dispel this behavior.

  First of all, restart your iPhone If you have not already -restart your iPad, iPhone or iPod touch.

  Next, try to remove and re-add the widget calendar-using the Widgets on your iPhone, iPad and iPod touch.

  Sincerely.

• How to remove empty lines of chain between the relevant data?

  I have problems with the removal of empty lines of final my data output string.  I know this is simple to do, but I'm stuck in the same train of thought.  The file is a converted hex file that is written in a series of recordings.  Convert lines it is result in fa all that data should be deleted and the number of records adjusted accordingly.  I have the code to take the file, convert, delete all of the records with F and adjust the number of files, but I'm left with a gap in my file no matter my approach I can't remove the empty spaces regularly.  I have attached the file with spaces and the goal is to remove the spaces between the blocks of code, and spaces is not always in the same direction.  Thanks for any help.  If needed I can join the code I already developed if necessary.

  Darrick

  You can read the file line by line and write back only if the length of the string <> 0.  (or maybe <> 1 in the case of the character line appears in the string to a blank line.)

  However, there is probably a way to change the code you have now so that he does not write blank lines.  Without seeing the code, it is difficult to help.

• Avoid writing empty lines or remove the empty string between data lines

  Hello

  I have this problem...  I write as a 4 x 4 witch table comes from a graph of intensity in a file. But when I write, regardless of the method that I use out it somehow unusable when I try to read more later.

  Right now I got change for a 1 x 16 table witch I later convert back to 4 x 4 again shown in the graph of the intensity.

  The problem is that I have empty lines between the data I want to remove to display correctly.

  Maybe to be clear in my explanation I will post screenshots of how I write and how I like to read...

  

  Can someone help me?

  Thank you!

  Antonio

  Why do you use a loop to create a string to write to the file? In LabVIEW 8.x writing on a spreadsheet file is polymorphic, so you can select the instance of 'Double' and simply connect your table 2D directly to it, without a loop or anything like that. On playback, even select the instance 'Double' for your return values exactly as you wrote them.

• I have an Apple Mac computer (about 2 years) and on many occasions I tried to install Service Pack 3 and every time it does not have enough space whne the system has a large empty space

  I have an Apple Mac computer (about 2 years) and on many occasions I tried to install Service Pack 3 and every time it does not have enough space whne the system has a large empty space

  Error message when you try to install XP Service Pack 3 on some Intel processor Apple computers, 'more space':

  http://support.Microsoft.com/kb/950716 MS - MVP - Elephant Boy computers - don't panic!

• ListView causes large empty area below.

  I have a ListView with two entrances and a label underneath.

  ListView causes a large empty space appears below its two entriesm and I can not understand how to get rid of.

  I tried to put a negative padding or margin on the bottom, but nothing helped.

  If I replace the ListView with two LabelFields, it works fine.

  I can't quite think the use cases for a ListView with only two points inside, both currently visible. I might have a better solution if I understood why you want that, but in any case, you can at least work around the problem for now by setting preferredHeight for something. If you know the height of each entry, you can just use it. Standard are 121 pixel, for the moment, so I think ' preferredHeight: 121 * 2 "could function as a quick hack.

• APEX in a table, add 3 default empty lines

  Hello

  I created a tabular presentation on my APEX page.

  Whenever he has some data in the table, it is displayed as below:

  I have to add 3 empty rows by default to the same when the first page load.

  In the dynamic actions, I tried to add a Java Script that add 3 blank lines by default on the page load event.

  JavaScript:apex.widget.Tabular.AddRow(); -This text is written by three times.

  However, the problem is when the page is loaded 2nd, 3rd time whenever 3 more empty lines gets added to the tab.

  I just WAN t 3 fault lines added only the first time when the page loads.

  Help please..!

  

  Hi David,

  Step 1:

  Create branch on the Page that deals

  Type: Branch to the page or URL

  Branch point: present now (after calculation, Validation and treatment)

  Target type: Application Page

  Page: same number of pages / / assume that you create the branch on page 2 and then give 2.

  for example:

  Page: 2

  Application: APPLY_REQ / / here you can write the query that you want to pass after clicking on the button apply.

  Step 2: Change your dynamic action and put this request in the part of the State as suggested in previous post

  Change the dynamic Action

  Conditional - > select "ask!" = Expression1.

  Under Expression1-> APPLY_REQ

  If you still not able to solve so please create the sample on apex.oracle.com?

  and share the workspace name credentials and connect with the name of the application.

  that won't be easy for us to solve your problem.

  Kind regards

  Jitendra

• Remove empty lines in the merged table

  I'm looking for a script that will find and remove empty lines from a table that contains fields of fusion.

  I have a table of data with about 800 cases. This table is used to merge a page report which shows the various components of the employee's income. There are about 20 lines in the table and 5 columns. I apply the merge fields to a table in my .indd file and merging works perfectly. However, there are several features/components of income who share not all employees. Therefore, all pages of the 800-page report contains several blank lines should I have deleted so that the remaining data lines to snuggle up to each other.

  I need a script that will find blank lines in an .indd table and delete them. I found the script that did this and works perfectly on an ordinary table with blank lines. However, it seems that a table cell that contains a merge field (< < myField > >) is not necessarily 'empty', even if the data in this field is Null. I found that after the merger, I can highlight a blank line, press DELETE, run the script, and the line disappears, as needed. But it manually thousands of times would frustrate the purpose of the script. Also note that I've rubbed my data file to ensure that no hidden formulas, characters or spaces. The "Remove blank lines for empty fields" option does not work on the fields in the table (it seems to me. If I'm wrong, let me know).

  It seems that I really need script which will remove references to empty merge fields after the merger. I could run and then my other script.

  I have spent hours on this and hope someone can point me in the direction of a solution.

  Thank you!

  You can remove the markers of merge field by doing a search and replace of TEXT PLAIN for and replace it with nothing. That should allow your script to work.

• Remove empty line in Selectonechoice

  In my LOV I get currently a first blank line before the 2 points in the LOV and the default value is empty. I need the default to be the first item in the list and do not want the empty line.

  My lov looks like this-

  < af:selectOneChoice id = "soc1" simple = 'true '.

  autoSubmit = 'true '.

  value = "#{pageFlowScope.Bean.var}" >

  < af:selectItem label = "first" value = "First" id = "si1" / > "

  "< af:selectItem label =" Second"value =" Second "id ="si1"/ >

  < / af:selectOneChoice >

  I can't use label not selected because that would give me an extra row in the LOV I want.

  I can't set value = 'first' I need the features as it is implemented now gets the current value selected by the user from the value field and I can't change that.

  Any suggestions?

  In my LOV I get currently a first blank line before the 2 points in the LOV and the default value is empty. I need the default to be the first item in the list and do not want the empty line.

  The problem disappeared when I initialized var to 'First' in the constructor of bean.

• cannot delete empty lines

  Hello

  With the help of FM10

  I have white lines that do not appear as \P (carriage returns) and I do not see an anchored frame.

  I took a snapshot of the screen between the text "in this context", there are all these empty lines. Are there

  some 'see' to FM10 which will show you what is hidden? You can see that there are no paragraphs (carriage returns)

  in the empty section at the bottom of the image there is a return after mechanism.

  -Ross

  

  You can have a widows and the orphans in this paratag which tells FM to be at least three lines together on a page. This would result in such a break, especially if the following content is something like an illustration or an array that does not correspond at the bottom of the page.

• How do force you source format to leave empty lines in CS6?

  I inherited the code with paragraph between some lines breaks so that there is a blank line between two lines of code.  When I apply Source Formatting, the original empty lines rest, but when I insert a blank line and then apply, formatted Source, empty lines, I inserted disappear.

  I show hidden characters and found on the lines that remain empty, there are 4 seats and a paragraph mark.  Where to insert the same, shaped always source deletes my empty lines, but retains those that someone else inserted (all in use do not DW) by adding 4 spaces and a paragraph mark.

  This behavior is the result of opening a file that was created outside the DW?  Is anyway to get the source format to let my inserted only blank lines?

  Thank you!

  What you describe means that there are other non-visible characters in the resistant line spacing. You can try to copy one of these blank lines and do a search in the file to replace what you copied with nothing and see if that gets rid of them.

• Adding empty lines in the Notes tab

  I've recently updated to 10 presenter.

  There is a huge difference in formatting in the Notes tab.

  I really like he did presenter 7.0. Can I get that back? Or I have to go back to the presenter 7.0?

  The indentation of the paragraph is a "nice to have".

  Empty lines are a "must have".

  THX!

  

  Hello

  This is a bug that was introduced in 8 presenter and is still there in 10 presenter.

  We will try to fix the bug in the next version.

  Thank you

  ALPI Agarwal

  Adobe Presenter Engineering Team

• Space after paragraph: how picas equal to an empty line in Garamond 7.5 regular?

  I use Indesign CC and want to add a blank line after each paragraph in my document. I discovered how to do this, but the only unit I am offered is picas. I could probably go to inches, but who does not really help me. My main text is written in font Garamond regular 7.5 size and I would like to have the empty space after each paragraph that is equal to an empty line written in this font with this size. How to do if find a blank line with the font settings much is? I guessed and it seems to be equal to 0p 7, but it would be great if I could make without guessing blindly. I'm happy for any help.

  By default, InDesign assigns leading at 120% of the font size. If you have not changed which, you'll notice in the control bar that your policy is 7.5 and spacing is (9). (When shown in parenthesis it denotes that a default value is used.) You could have a paragraph style that make 7.5, 10.5 lead and it would display the 10.5 without parentheses).

  For the space after you want, in the paragraph Style game your space according to 9pt.

• Adding empty lines to tabular form on page load

  Hello
  I use APEX 4.1.1 on 11gXE and Windows Vista.
  
  I created a tabular form on a page. When the page loads I want the::AddRow() to call x number of times where x is the value returned by a list of selection (from 1 to 10) on another page. If the value 3 is selected::AddRow() is called 3 times. This is similar to the example of Denes Kubicek, but I am interested in the use of a dynamic action instead. Here is the link to Dene
  
  http://Apex.Oracle.com/pls/OTN/f?p=31517:209
  
  I created a dynamic action that fires when the page loads and runs the following code:
  
  var i = 0, z = $v ('P1_NO_ITEMS');
  
  While (I < z)
  {
  ::AddRow();
  i ++ ;
  }
  
  When I put P1_NO_ITEMS 3 and go to the tabular presentation page, it loads but does not add 3 empty lines in the form. I tried hard coding a value into the javascript code and that works very well. for example
  
  var i = 0, z = 3;
  
  When I add an alert in the code the value of P1_NO_ITEMS seems to be undefined, and I get a white for its value. If I check the session state P1_NO_ITEMS has the value 3.
  
  Any ideas where I'm wrong? I have a feeling that it is something simple...
  Thank you very much
  Helen

  Hi Helen
  >
  I use APEX 4.1.1 on 11gXE and Windows Vista.

  I created a tabular form on a page. When the page loads I want the::AddRow() to call x number of times where x is the value returned by a list of selection (from 1 to 10) on another page. If the value 3 is selected::AddRow() is called 3 times. This is similar to the example of Denes Kubicek, but I am interested in the use of a dynamic action instead. Here is the link to Dene

  http://Apex.Oracle.com/pls/OTN/f?p=31517:209

  I created a dynamic action that fires when the page loads and runs the following code:

  var i = 0, z = $v ('P1_NO_ITEMS');
  >
  JavaScript works only on elements in the HTML DOM. Once you have navigated away Page 1 the P1_NO_ITEMS not available in JavaScript.
  >
  While (i<>
  {
  ::AddRow();
  i ++ ;
  }

  When I put P1_NO_ITEMS 3 and go to the tabular presentation page, it loads but does not add 3 empty lines in the form. I tried hard coding a value into the javascript code and that works very well. for example

  var i = 0, z = 3;

  When I add an alert in the code the value of P1_NO_ITEMS seems to be undefined, and I get a white for its value. If I check the session state P1_NO_ITEMS has the value 3.

  Any ideas where I'm wrong? I have a feeling that it is something simple... >

  Change

  z=$v('P1_NO_ITEMS');
  

  TO

  z='&P1_NO_ITEMS.';
  

  See you soon,.