Large storage presentation / ESX / requirement 6 to

Similar Questions

• If I switch to larger storage can I download large files

  If I switch to larger storage can I download large files - I need to store a chest of 10 GB

  Hello

  If you maximize your storage space, then you could upload larger files.

  Reference: Memory and storage http://windows.microsoft.com/en-US/windows7/memory-and-storage

  (For Vista)

  Hope this information is useful.

• ERROR: this version of esx requires a processor capable of 64-bit operation

  Kindly help to provide entries:

  I have a DELL Optiplex 760 that supports VT that is enabled.

  I tried to install directly ESX 4.0 and has been able to do successfully.

  However, I have tried to format and installed Windows 7 and then installed VM Workstation 7.

  When I tried to create a virtual machine (ESX), it gives me an error "this version of esx requires a 64-bit capable processor."

  Any advise?

  ESX 4 requires no VT she requires only a 64-bit processor.  Your physical processor is sufficient.  (Note, however, that you would be able to run the 32-bit clients.)

  Workstation 7 requires however VT virtualization features 64-bit processor.  Since you don't have VT, the virtual processor in Workstation 7 is a 32-bit processor.

• Storage - 5 ESX & HP Blade Storage expansion

  Hi all

  Current context:

  • Runing ESX 5 HP BL460 Blade Server standard
  • HP D2200sb PCIe Storage Blade consists of 6 146 GB drives & 6 empty bays
  • 5 virtual machines exist on a single data store

  Requirements:

  • Repalce the 6 146 GB hard drive with 12 300 GB hard drive and store the virtual machine.

  This will work:

  1. Insert 6 300 GB HDD in for storage of balde
  2. Create a new table
  3. Present this as a data store
  4. migrate the virtual machine to the new store using storage vmotion
  5. remove the old store of 146 GB
  6. Remove the disks from 146 GB of storage blade
  7. Add more 6 HDD for storage balde
  8. Add to the existing array consisting of 6 300 GB drives
  9. Range of Vsphere
  10. create additional data warehouses

  Thank you, have I missed something?

  Looks good to me, should be good to go.

• Storage LUNS ESX 3.5 limit?

  Anyone here heard that VMware does not recommend the establishment of LUN with more than 1 TB? I have a customer who bought a Dell Equalogic over 6 TB of space, of the VMware ESX Server 3.5 04 clienthas, he wants to create a 2 TB LUN that these servers pre-assembled this LUN in the future and so the customer can enable the feature HA withVMotion, the moment he has no server vCenter to do this.
  
  Only a specialist Dell infrormou that VMware does not recommend the creation of LUNSwith more 1 TB, but the client could not explain to me why is informed by a Dell expertfrom, he advises the customer to create four 500 GB LUN with all LUNS see theseservers, rather than a single 2 TB.
  
  Nobody here knows how to say that this suggestion of Dell? Is there the anylimitation in Vmware that prevents the administration of large LUN?
  
  Thank you all.

  Even if the LUN presented to ESX 3.x and 4.x limit is 2 TB less than 512 bytes, I agree with the DELL technician. Unless you need large data warehouses/LUN you'd better go with several 500-600 GB LUN. In this way, you can present the LUNS via the ports of different controller on storage for better performance and also you are less affected by the reserves of SCSI.

  André

• iSCSI storage presented to the hosts managed by different vCenter Server - questions?

  I currently have three hosts (esxi 5.0) that are managed by vcenter server 5.5 U2. The hosts are attached to iSCSI LUNS (data warehouses) 10.

  I'm migrating to esxi 6.0 U2. For this, there are three new hosts have esxi 6.0 installed and managed by vcenter server 6.0 U2 U2.

  The plan is to detach/remove 5.0 5.5 U2 vcenter esxi hosts. Then import it into vcenter 6.0 U2 (a new cluster will be created). Once imported, uninstall the 5.5 vcenter u2. Then turn off the resident VMs imported esxi 5 hosts and move them to 6.0 esxi hosts.

  My query is regarding regarding storage.

  At present, three new guests see all storage the old 5.0 esxi hosts to see (guests are not in the cluster. "I'm still trying to put things up). That's because the new hosts were deposited to the same group on the side iSCSI initiator storage. Now things, data warehouses are visible by the hosts with esxi 5.0 (managed by vcenter 5.5 u2) and also the esxi hosts 6.0 (managed by vcenter 6.0 u2). The only VMs residing in esxi environment 6 is vcenter 6.0 u2 and update manager 6.0 u2. These are in a data store that is not any other virtual machines.

  That's no problem during the migration? I have not created a cluster for the esxi 6.0 hosts yet and plan to do after obtaining your entries.

  Thank you!

  No problem whatsoever, regardless whether if you do or that you add no vSphere 6 hosts in a HA cluster.

  If you temporarily enable EVC on the vSphere hosts 6, once all hosts are connected to the same vCenter you can VMotion all VMs to new hosts even without any stop. Clear CVS once the migration is complete.

• Storage model - ESX - workstation use

  Hello

  After a few tips of knowledge in the following area.

  We have a half of our people by using the ESX v4 based VMs and about half using Workstation v7.1.

  The idea for us strategy, it's if they could share common templates.

  One idea would be to have an ESX storage area which is also a normal network file share.

  Now, I know that VMware Workstation can import machines virtual/templates and stand-alone converter can do similar.

  Both involve the network copy.

  Now the ESX for workstation path seems clear, what a virtual machine or a template created on a workstation?

  I did not see an ESX import, although there is import export of the data store.

  The ESX will manage a model/VM Workstation v7.1 if it were on its data store?

  Anyone else had this experience trying to maximum benefits between and Dept. of pain?

  Part of the difficulties in this configuration "datastore" mixture is thin issues / think commissioning, IDE / SCSI disks and expand the shrinkage.

  (that is, FDI is treated different from SCSI, but images SCSI are not very good for cloning of images of physical computers)

  Ideally, you would like your store of "templates" and must be size min then expanded when used as real VMs.

  I have not found any article a Ko or help with success and simply covering options and roadblocks in these areas.

  Thank you

  I do not recommend thick...

  Thin and drop thick are supported.

  But on both workstation thin and drop thick can also be a single file, or split in two on several files... THIS latest version does not work on ESX/ESXi

  André

• Controller of active/active storage and ESX 3.5 U4

  My SAN controllers are configured as active/active, both quick (?) question.

  ---

  Can I not load balance my ESX 3.5 host traffic HBA (2 HBAs for each host of course)?  Manage the paths of dialogue shows ' round Robine as "Experimental" only that I'm obviously not to use in production.

  My guess is that I can't have ESX host HBA not experimental load balancing up to what we have upgraded to ESX 4.0... I just wanted to hear here officially I can tell my boss ' see? We HAVE upgrade for it, you fool! »

  With 3.5 and active/active storage, good politics is fixed path.

  The load balancing is experimental.

  Or you need to upgrade to vSphere.

  André

• Join a group of presentation services: required privs?

  Are there special privileges required to join a group of presentation services (my account > join catalog group)?
  
  My understanding is that you need only the password of group.
  
  When I try to do with a particular user, I get
  
  Unauthorized
  Only administrators can view this page.
  
  
  
  -John

  Hi user,
  Only users with administrative privileges can affect users in groups. If you know the username n passwrd Admin, log in as administrator and then assign this user to the Administrators group in the RPD.

  Thank you
  Disney

• GarageBand taking too large storage capacity

  Hi all

  I've updated for macOS Sierra 10.12 earlier and noticed something strange / question - as you can see in the screenshot below GarageBand takes 17.37 GB on my hard drive, but I uninstalled the app entire including the Apple Loops loops library (used AppCleaner)

  I have a MacBook Pro (retina, 15-inch, mid-2015). 2.2 Intel Core i7, 16 GB of RAM and 251 GB of flash storage.

  Is there anything else I can do or anything, I'm not properly? I would ideally like to free space.

  Thanks a lot for your help.
  

  I'm having the same problem! I've never used before garage band!

• Amazon premium video App takes too large storage capacity.

  I received a message that I'm almost out of storage on my iPad. Wen, I was looking at the storage manage I see 1.5 GM has used the first Amazon Video App on my iPad. When I click on it it shows 1.4 GB of documents and storage.  I only download movies, but rather listen to the. I compared it to my Netflix App that used only 87.7 MB or SHO Anytime using 11.6 MB. What should I do to remove this excessive storage? Should I delete the App and reload?

  Thanks for any help in this matter.

  Yes, delete and re-install. Not elegant but effective.

• ESX required 64-bit cpu capable of 64-bit operation

  Hi all

  Newbie trying to learn,

  I want to install esx vm on 7 workstation, and I get this message. My os is win7

  Thank you

  You will need to run Workstation on a 64 bit OS and the motherboard will have hardware virtualization. Check the BIOS to see if the hardware virtualization is supported and that it is enabled.

• Expand local storage of ESX 3.5

  I don't have enough space on my VMFS, located on a local drive. I have two drives the with a RAID 1. I'll change the hard drive first and then your first hard disk is replicated I change the hard disk of the second. After that, I have to develop my vmfs.

  How I develop my VMFS?

  You can't develop your VMFS.

  You can only add an extension to your data store or the temporary displacement

  your virtual machines, remove the data store and create a new large store of data.

• Adding storage to esx. Problems with VCB proxy

  Hello

  I just added 4 FC LUN and them have initialized on ESX 3.02 with no problems.

  I went to the VCB proxy, which had the automount disable, then I think that I made a mistake because I put them online (done not initialized) and after that Vmware can't access these drives vmfs.

  Try to solve this problem I did the automount disable and scrub, but I don't know what to do next. Should I restart VCB proxy?

  According to some posts here, I've run ' fdisk-l/dev/SD all? "command and it shows that these 4 discs didn't fb partition type.

  Based in another post, I ran fdisk against each drive but I don't have the ability to place the partition type.

  Can someone help me on this?

  Thank you

  My DSL is peeling. But looking over your Yes steps. I can take down a second chance. I can't provide reliable help that I continue to be disconnected.

• performance of large storage spaces

  Hi all.
  Is anyone know how is better?
  I need to create the large table (about 400 GB), so I need big tablespace. How I need to transform this tablespace, what is the size of the blocks is better? And may be preferable to create a set of smaller files to the tablespace?
  By the way if I create indexes in other tablespace, is really bad performance?
  
  Anton.
  
  Published by: user9050456 on February 19, 2010 01:20

  Hello
  It is really preferable to indexes in other tablespace because this improves performance by reducing the IO as compare to put things in a tablespace. If you can put indexes in different tablespace.

  Thank you
  Rafi.