Storage model - ESX - workstation use

Similar Questions

• Error trying to save the binary XML storage model scheme

  Hello
  
  I am trying to record my XML schema to the server 11 g for use in the binary XML storage model. Here are the details:
  
  BEGIN
  () DBMS_XMLSCHEMA.registerSchema
  SCHEMAURL = > ' / sys/schemas/ACSSWEB/ALLMDN_BinaryDetailsSchema.xsd',
  SCHEMADOC = > XDBURIType('/sys/schemas/ACSSWEB/ALLMDN_DetailsSchema.xsd').getBLOB ().
  LOCAL = > TRUE,
  GENTYPES = > FALSE,
  GENTABLES = > FALSE,
  OPTIONS = > DBMS_XMLSCHEMA. REGISTER_BINARYXML);
  END;
  
  I get the following error message:
  
  Error report:
  ORA-00406: COMPATIBLE parameter must be 11.0.0.0.0 or higher
  ORA-00722: feature "binary XML".
  ORA-06512: at "XDB". DBMS_XMLSCHEMA_INT', line 37
  ORA-06512: at "XDB". DBMS_XMLSCHEMA", line 65
  ORA-06512: at line 2
  00406 00000 - "COMPATIBLE parameter must be %s or more."
  * Cause: The COMPATIBLE initialization parameter is not high
  sufficient to allow the operation. Allowing the command would be
  the database is incompatible with the version specified by the
  current COMPATIBLE parameter.
  * Action: Shutdown and commissioning with a higher compatibility setting.
  
  
  (1) someone can you please confirm - if change the compatible parameter will help accomplish this?
  (2) is there one other way (other than to change the compatible parameter) to make this work? My DBA are not immediately ready to change the parameter with the fear of breaking legacy applications even in the test environment. I seek an alternative solution to help me analyze the binary XML storage model.
  
  PS: I am a newbie to XML DB native development. So please forgive me if I asked a very simple question.

  Binary XML is a feature of Oracle 11, which is why the error message.

  There is probably an event (Oracle support/internal) parameter that once was able to make this happen in point 10.2 as well or, despite you must also update some of the registered scheme etc., etc., etc. to the point 10.2...
  In short: he took no other way responsible to do. Set the compatible parameter 11.x if you want to use storage binary xml based schema.

• I have a laptop asus F5R model. I use the operating system to windows xp service pack 2, I can't install the audio driver on my knees, please help me

  I have a laptop asus F5R model. I use the operating system to windows xp service pack 2, I can't install the audio driver on my knees, please help me

  Download and install the last set of drivers (starting with the chipset / driver motherboard) to the ASUS support site: http://support.asus.com/download/options.aspx?SLanguage=en&type=1

  J W Stuart: http://www.pagestart.com

• 802.1 x (dot1x) with IP phone / workstation using several authentication domains (MDA)

  Scenario:

  Workstation (behind the phone)

  8.5 (2) software IP Phone 7911

  ACS 4.1 with AD on the same server

  Cisco switch WS-C3750E-24PD with c3750e-universalk9 - mz.122 - 53.SE1.bin

  Guide used:

  http://www.Cisco.com/en/us/Tech/tk389/tk814/technologies_configuration_example09186a00808abf2d.shtml

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a00801df0e4.shtml

  To accomplish:

  Computer and authentication of the IP phone with 802. 1 x. The phone using EAP - MD5 and the workstation with PEAP-MSCHAP version 2.

  Tried and worked:

  Workstation using EAP - MD5 (with ACS username) and use PEAP (with AD user name) and it also acceded to the vlan correct according to the username.

  The journal of the ACS, authentication failed:

  Message-Type-name of user - Group-Name-Caller ID - network access profile name - Code failure-authentic -.

  Authentic has no EAP type - CP 7911 G-SEP00254594D6BA--00-25-45-94-D6-BA VOZ - (default) - not configured

  Configuration of the Switch:

  Group AAA dot1x default authentication RADIUS

  Group AAA authorization network default RADIUS

  RADIUS-server host 10.32.250.250 auth-port 1645 acct-port 1646 borders 7 095F4B07110445425B54

  interface GigabitEthernet1/0/3

  switchport mode access

  switchport nonegotiate

  switchport voice vlan 200

  multi-domain of host-mode authentication

  Auto control of the port of authentication

  periodic authentication

  MLS qos trust device cisco-phone

  MLS qos based on vlan

  dot1x EAP both

  dot1x quiet-time 20

  dot1x timeout server-timeout 100

  dot1x tx-delay 100

  broadcast storm control 15.00

  multicast storm-control level 10.00

  spanning tree portfast

  spanning tree guard root

  Summary of ACS Configuration:

  Configured the AAA

  2 group - voice and data, each with their VLAN respective and the ACS configuration parameters (attribute / value (AV))

  Added the user name and password for IP phones

  Mapped the announcement to the DataSet

  A certificate and installed in the workstation

  Set up the configuration of global authentication, where I ticked the boxes PEAP and EAP - MD5

  So, as I said, it only authenticates the workstation w / IP phone.  When I add the IP phone it does not authenticate any of them.

  Someone at - it one day?

  Hello

  First of all, you can try a different sw for phone (for example 8.4.2S). I have a similar problem with the 8.5 software and phones 7945/7965. Secondary, you must attribute av-pair confiigure side ACS for the correct placement of the voice phone to vlan.

  Concerning

  Stanislav

• Is it possible to transfer everything to a virtual hard disk that is smaller on a virtual hard disk that is larger in VMWare Workstation, using the same virtual machine?

  Hello

  I was wondering if it is possible to transfer everything to a virtual hard disk that is smaller on a virtual hard disk that is larger in VMWare Workstation, using the same virtual machine? In the affirmative, please could someone advise me on how to do it. Also utility management and disk transfer can be used in virtual machines to do this?

  Thank you very much

  Tim Auluck

  I'm not sure what exactly you are asking. Can you please clarify!

  Basically you can resize a virtual drive or add a second virtual disk to a virtual machine and transfer/copy files. You can also resize the virtual disk using VMware Converter for example.

  André

• How do to identify the documents called "models of library" using the RESTful API?

  How do to identify the documents called "models of library" using the RESTful API? Furthermore, what constitutes a document to be a "model of library"? I see nothing in the libraryDocuments RESTful documentation that describes this type of document, such as presented on the tab 'Manage' my developer account. Please see the screenshot below. There is a model of Document named "[DEMO ONLY] Test model" listed under "Library Templates" and I try to figure out which classifies that document to be included this way and how does produce a similar announcement by using the RESTful API.

  

  Thank you!

  Hello

  You can connect to access library models using the REST API, use 'GET /libraryDocuments' allowing to recover documents in library for a user. Models are created in the account of EchoSign, which later are accessible via the REST method mentioned above.

  Jat

• Unable to connect to the ESX Server using PowerCLI 4.1.1

  I can't connect directly to an ESX host using PowerCLI 4.1.1

  C:\Program Files\VMware\Infrastructure\vSphere PowerCLI > Connect-VIServer esx001

  Connect-VIServer: 02/12/2010 12:04:38 Connect-VIServer unable to connect using the requested protocol.

  On line: 1 char: 17

  + Connect-VIServer < < < < esx001

  + CategoryInfo: ObjectNotFound: ( , ViServerConnectionException)

  + FullyQualifiedErrorId: Client20_ConnectivityServiceImpl_Reconnect_ProtocolError, VMware.VimAutomation.ViCore.Cmdlets.Commands.ConnectVIServer

  Connecting to vCenter works without problem.

  I also tried specifying the parameters of the - Protocol and - port, but without success.

  I am using .net 3.5 SP1 and PowerShell 2.0

  Anyone else has the same problems?

  -

  ---

  Arnim van Lieshout

  Blog: http://www.van-Lieshout.com

  Twitter: http://www.Twitter.com/avlieshout

  If you find this information useful, please give points to "correct" or "useful".

  Hi Arnim,

  Could you please check your ProxyPolicy settings (Get-PowerCLIConfiguration)? You can set the proxy for 'NoProxy' strategy and try to reconnect. I guess it could be the cause of the problem.

  Kind regards

  Dimitar

  -

• Redundency Server ESX/EXi using storage internal

  I use ESXi to run a few rarely used VMs.  ESXi is running a server with internal storage.  ESXi having no backup capabilities, I would install another ESXi server and to keep the two synchronized in the case where the primary server goes down.

  First of all, is it possible with ESXi?  Or do I need to buy an ESX license for two servers and also buy and use VMotion to keep synchronized?

  Second, what is the maximum RAM ESXi or ESX 3.5 will support?

  Thank you

  Shannon

  Hello

  I use ESXi to run a few rarely used VMs.  ESXi is running a server with internal storage.  ESXi having no backup capabilities, I would install another ESXi server and to keep the two synchronized in the case where the primary server goes down.

  ESXi backup can be performed using the latest version of Veeam Backup. So, that exists now.

  First of all, is it possible with ESXi?  Or do I need to buy an ESX license for two servers and also buy and use VMotion to keep synchronized?

  You could look at VM level replication (Doubletake, etc.). VMDK (vReplicator, Veeam Backup) level replication. Or watch in Xtravirt XVS or HP Lefthand Networks VSA as alternatives.  These last two options will synchronize local storage between multiple hosts. XVS is limited to 2 guests and 1 handles LUN but VSA more. XVS is also free.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• Storage - 5 ESX &amp; HP Blade Storage expansion

  Hi all

  Current context:

  • Runing ESX 5 HP BL460 Blade Server standard
  • HP D2200sb PCIe Storage Blade consists of 6 146 GB drives & 6 empty bays
  • 5 virtual machines exist on a single data store

  Requirements:

  • Repalce the 6 146 GB hard drive with 12 300 GB hard drive and store the virtual machine.

  This will work:

  1. Insert 6 300 GB HDD in for storage of balde
  2. Create a new table
  3. Present this as a data store
  4. migrate the virtual machine to the new store using storage vmotion
  5. remove the old store of 146 GB
  6. Remove the disks from 146 GB of storage blade
  7. Add more 6 HDD for storage balde
  8. Add to the existing array consisting of 6 300 GB drives
  9. Range of Vsphere
  10. create additional data warehouses

  Thank you, have I missed something?

  Looks good to me, should be good to go.

• Controller of active/active storage and ESX 3.5 U4

  My SAN controllers are configured as active/active, both quick (?) question.

  ---

  Can I not load balance my ESX 3.5 host traffic HBA (2 HBAs for each host of course)?  Manage the paths of dialogue shows ' round Robine as "Experimental" only that I'm obviously not to use in production.

  My guess is that I can't have ESX host HBA not experimental load balancing up to what we have upgraded to ESX 4.0... I just wanted to hear here officially I can tell my boss ' see? We HAVE upgrade for it, you fool! »

  With 3.5 and active/active storage, good politics is fixed path.

  The load balancing is experimental.

  Or you need to upgrade to vSphere.

  André

• List of the models of printers used in specific carts

  Are there lists including models use cartridges anywhere?

  I want to replace an older "i"series with a printer used only (not all-in-one). "

  Hey videobruce.

  The PIXMA series printers iP replaced the i-series printers.

  The PIXMA iP Series line are printers only, they do not have the capacity analysis or by fax.

  None of the currently available printers are supported in the Linux operating system.

• Change the model of phone using BAT button

  Hello

  Is it possible to use BAT to change the 'model of phone button' which is attributed to several phones?

  You cannot use BAT for updating the model of phone on existing phones button. However, you can set up the model of phone button on phones that you add by using BAT, so you can export the phones that you want to change, remove them from the CCM and add them using bat with the model of phone updated button.

  I hope this helps. If so, please indicate the position.

  Brandon

• The upgrade of Vista Business 64 bit on a workstation used

  I recently bought a Dell Precision T5400 used with Windows Vista professional. I'm very happy with it, but I intend on a program 64 bit running on the workstation. What are my upgrade options?

  Anyway you have to clean install.

  Your options are Windows Vista 64 bit, Windows 7 64-bit or 64-bit Windows 8.

  You can use a Digital River 64-bit with Service Pack 1 setup files to a bootable media and pure install 64-bit Windows Vista Business.

  I recommend Windows 7 Professional with Service Pack 1 64-bit, but you have to pay for a license (its probably the most expensive option).

  You can also switch to Windows 8 Professional upgrade license is cheaper than that of Windows 7, but in my opinion, a lower quality product.

  I would recommend either tried and decide what you like the most and if you think that its worth the upgrade.

  Follow the instructions in install windows own A: http://philipyip.wordpress.com/dell-community-forums/

  I suggest running step 2 and 3 to A Clean installation of Windows Vista before experimenting. The guide tells you how to obtain trial versions of Windows 7 and 8 so you can evaluate them. With Vista 64 bit, you have the product key and must be able to activate using activation activation recovery backup program or phone to Microsoft.

• How can I see how much storage I have and use?

  looking at my creative cloud library-all files - how can I see how much I have storage space, and how much I use to decide if I need more?

  You can check the desktop creative cloud app store as shown in the screenshot above. You can also check in the site settings page for the active CC to https://assets.adobe.com/activity/settings

• How to get ESX ip use get - vm-CLI

  I want to use the Get - vm command to get the ip of ESX, the sample is below, the but you can't find the EsxIP but the name of ESX, it may has a grammar error. Who can help me on this point, thank you

  I donot want to use the command get-vmhost, because it would be very slow

  Get-VM | Select Name,id, `
  @{Name=’ESXIP’;Expression={$_.VMHost | Select ($_.ExtensionData.Config.Network.Vnic | ? {$_.Device -eq "vmk0"}).Spec.Ip.IpAddress}}
  

  Hi, try this:

  Get-VM | Select Name, id, @{Name="IP"; Expression={$_.VMHost | Get-VMHostNetwork | Select -ExpandProperty VirtualNic |
  where {$_.PortGroupName  -match "pgManagement"} | Select IP}}
  

  Hope that this could be useful... pay attention to-match: substitute your correct portgroup

  Concerning