Laser Jet MFP M176n Pro: Driver comes into conflict with ASUS router

Similar Questions

• Color Laser Jet MFP M176n Pro: Cannot print bar code in the PDF document

  We have just received our Laser Jet printer and tried to print a PDF document that has a barcode in the lower left corner. The document print very well however the barcode area is empty and the numbers under the barcode are printed.

  How can I get the barcode to the printer?

  I thank very much for your guide, we printed the document as an image. My husband tells me that this happens because the primer is not postscript.

• Color Laser Jet MFP M277dw Pro: frequently updated software

  I am the owner of a color Laser Jet MFP M277dw Pro. I get updates almost every week, and the software update is very strange. I'm clicking on the update system, it takes a lot of time to meet up with the text saying I'll remove the actual update or add another device. When I say no, thanks, I'll get a message saying that my update was successful (but only if I have to cancel this message). I don't understand why I have to go through this illogical question. Also, I don't understand why it is not necessary to update very frequently, especially when there is no explanation of the reason why.
  
  The two just exclamation points annoy me because I think that there must be a problem with the software, even if the printer works well.
  
  Sincere greetings
  
  Arne H. Wilstrup
  Denmark

  AHW

  Greetings @ahw,

  Thank you access the Forums from HP Support for extra support! I see that you have problems with updates of window for the printer software. I'd love to help you.

  Given that the printer works, I would say to hide updates.

  A poster tried to show or hide updates and it solved their problem.

  • How to "hide update" during the Build 9926
  • Need for the old Windows Update, not the new Windows Update
  • Windows 10 - where is the 'hide or show updates' hidden feature
  • How can I hide this update in Windows 10?
  • How to hide Windows Update, Windows 10 build 10061?

  You can also give your feedback to Microsoft, and if all goes well, they will release an update to correct the function of the operating system. You can learn how here; Updates and feedback.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• laser jet mfp m127fn pro: need manual for laser jet pro mfp127fn

  There was no selection board for printers.     I need the manual for a laser jet mfp 127fn pro.  whenever I click on this manual, on the website of hp, I get a blank screen with a tiny 'x' in a small circle at the top left of my screen.   can someone tell me why I can't access the manual?  I do not have a firewall.

  I'm happy that using another browser worked for you.

• HP Laser Jet MFP M127fw Pro: How can I enable send/receive faxes "On" or "OFF"?

  I just bought and installed an HP Laser Jet MFP M127fw Pro and I am really impressed so far! However, I can't figure out how to activate the fax answer simply 'on' or 'off', which is my preferred way of handling. Any suggestions? Thank you!

  Hey @BWC3,

  Welcome to the Forum from HP Support.

  I understand that you're looking to configure the settings of your HP LaserJet Pro MFP M127fw fax.  I would like to help.

  Here's what I recommend:

  • In the front panel of your printer, press Setup key
  • Touch Fax Setup
  • Touch basic settings
  • Tap Answer Mode
  • Here you can choose either Manual or Automatic.  'Manual' selected you are essentially turning the fax answer capacity off and "Automatic" would naturally be the setting 'on '.

  Let me know if you need help - I'm always happy to help you.

  Have a great weekend!

• HP Laser Jet MFP M127fn Pro: How to send a fax using speed dial?

  I have a new HP Laser Jet MFP M127fn Pro: how to send a fax using speed dial, I entered already numbers in the address book.

  I'm embarrassed to say that I spent several hours trying to get the speed dial to work on a M127fn.  It turns out that there really no speed dial.  That's the conclusion of at least a HP tech that actually used the machine.  Another tech was able to describe a way to fax a phonebook entry, but it is quite too complicated to be called a speed dial.

  [1] press the button settings (key).

  [2] press the right arrow to access the phone book.

  [3] press OK button.

  [4] use the right or left buttons to reach the desired phone book entry.

  [5] press the OK button to reveal the label for the entry, or "empty" if it is not set.

  [6] press the OK button if the element is set to display the fax or dialing options.

  [7] press FAX to initiate a fax to this phone book entry.

  My users find it much easier to have their phone numbers pasted on the machine where they can connect looking them to instead scroll through menus, for the right option.

  It seems that there is some sort of disconnect between hardware, firmware, and technical writers on this machine, because this ancient feature has been neglected, and the user guide is left to sputter on the issue.

• I signed up for CC. I don't know that this Dreamweaver will come into conflict with my older version of CS5. You can run two versions of the DW on a single computer?

  I signed up for CC. I don't know that this Dreamweaver will come into conflict with my older version of CS5. You can run two versions of the DW on a single computer?

  You can run two versions of the DW on a single computer?

  Yes.  Please do not duplicate messages.

  Nancy O.

• Laser Jet MFP 127fw Pro

  I have a Laser Jet MFP Pro 127fw. I can scan by clicking on the icon to scan on my desk. Is there a way I can add an option to scan for the small screen on the printter where icons for 'Copy', 'Fax' and the 'Apps' icons appear? Or do I always have to run a scan directly from my PC?  Thank you.

  Hello @jvelazquez, thank you for this question! I will do my best to help you today.

  From what I understand you do all your scans of computer software. Ask yourself if you are able to download a scan icon on the front of the printer display panel.

  Here is a link to the user for your MFP HP LaserJet Pro 127fw guide. User's guide.

  From what I see, what you ask is not an option on this model. We hope this isn't too much of an inconvenience for you.

  Thanks a lot for your time! Can't wait to hear back on your part! Have a great week.

• Laser Jet MFP M127FW Pro: Will not stop "hologram fax page 1" and is stuck in this mode

  I have Laser Jet Pro MFP M127FW.  This morning, a fax came through, and printed, however, the touchscreen rpet ' Print Fax: 1 Page, "with absolutely nothing to print.  I can now no longer print documents, or send and receive faxes again.    When I leave on this screen, the message disappears and comes back about a minute later for inactivity.  I tried to unplug and plug the unit in the.  I tried to use the switch to stop the machine.  When the powers of the slot machine, he will immediately return to the ' print fax Page: 1. " I tried clear memory and also the power resets. I keep reading on a Ret NVRAM and I would try it, but can't find anywhere it is displayed!

  It is a real problem for me because I use the fax machine throughout the day!  Can someone help me?  Thank you so much in advance!

  Hey @nhorn1115,

  Welcome to the Forums of HP Support!

  I understand that you have a fax job that will not print from your printer Laserjet M127fw range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. When done, remove the cable from the back of the printer's fax. Now:

  1. Click on the configuration icon that looks like a key.
  2. Click on Service.
  3. Click Fax Service.
  4. Click clear saved faxes.
  5. Connect the cable of the fax.

  Please let me know if this clears the stuck fax. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Color Laser Jet MFP M277 Pro: Can I scan a document on the HP MFP M277 Color LaserJet Pro printer double-sided?

  Hello

  What I can and, if so, how to scan a document double sided on the Color Laser Jet Pro M277 HP printer MFP?

  Thank you very much

  Paul

  Hello

  No, it only supports printing double-sided, recto verso but scan copy not duplex from the Manual:

  http://h10032.www1.HP.com/CTG/manual/c04474163.PDF

  Kind regards.

• Laser Jet MFP M127fw Pro: Windows 10 Upgrade causing failure print

  Installed Windows 10 free update of Windows 8 - everything is going well until an automatic upgrade on August 13, 2015.

  Since the 8/13 patch (?), the Laser Jet Pro MFP M127fw spool print jobs, but do not go to the printer.

  Removed and reinstalled HP provided the CD with the same results.

  Test print at the end of installation OK.

  When you try to print from Outlook 2003, Windows 10 returned two error messages

  It said printer error state.

  Other says something about outbind failure.

  Same feeling of failure for Adobe 11.0.12.

  Word and Excel also

  Name of the default printer in Windows print Manger is:

  HP LaserJet MFP M127-M128 PCLmS Pro.

  HP "AUTOFIND PRODCUTS" set ID's of this printer as:

  MFP HP LaserJet Pro M1136

  Resolved failure printing using HP diagnosctic tool 'HP and Scan Doctor 4.7 printing'.

  Installed an AVAILABLE to update the printer driver.

  Not until the 'WITHDRAWAL of POWER' to restart.

  Everything looks OK now.

• Color Laser JEt MFP M477fd Pro: automatic update of ruined printers print

  My new laser Jet worked very well until I followed the instructions on the printer for an automatic update. Now print is ruined. Page layout is described in gray, and look bad color photos. This happened DIRECTLY after that I said yes to the screen to update printer on the printer itself. I did not change my Mac.

  I tried closing printer, computer shutdown, and then restart the printer, then restart the computer.

  The Configuration report (can barely read.) Firmware Datacode says: 20160331, which is apparently the most recent printing for my model software.

  I'm on a Mac 10.10

  Color Laser Jet Pro MFP M477fdw, bought end of 2015.

  The printer was so easy to set up and worked wonders for 200 pages that I sent to him so far, until I said yes to an update. Wish really to say yes to that, but I just assumed it would work as well as everything else.

  Thank you for your help to solve this.

  After trying countless things, including uninstalling and reinstalling the printer and download the latest driver, I called Technical Support. The number is on the internet, not on HP. 800-334-5144 where you need it. They continue to try to trick you online, but eventually, you get to someone who can help.

  When I described the print results, I was getting, she had me do the cleaning Page, 3 x and 3 x color calibration, which corrects the problem.

  The problem of updating firmware with the trainer, is what I * think * she said.

  If your printer works fine... DON'T let NOT download an update.

  It has been long since I've owned a laser printer. Lesson learned. Thank you, Natasha.

• Laser Jet MFP M125nw Pro: the paper is stuck inside the printer

  the paper is stuck inside the printer Laser Jet Pro MFP M125nw

  Did you follow the information from the HP web site?

  http://support.HP.com/us-en/product/HP-LaserJet-Pro-MFP-M125-series/5396664/model/5303404/document/c03921935/

• Color Laser Jet MFP M277dw Pro: Color Laser Jet Pro Scan to network file

  I'm trying to implement the network folder with my Color Laser Jet Pro M277dw and my MacBook Air with OS X 10.10.5 MFP scanning.  I've implemented the SMB shared folder as indicated, you can see here where I gave everyone access read/write:

  

  On the HP management page, I put in the path by using my IP address, as suggested in this article.  However, the connection test is always a failure.  Could someone give me some advice?  Here's what I came in the form of HP:

  

  Thanks for the help!

  Of course

  You can find the firmware on the page of product below:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Kind regards

  Shlomi

• HP Laser Jet MFP M127fw Pro: Reduce the font size of iPad Air

  I installed the HP ePrint app on my iPad Air and print by AirPrint on my Laser Jet Pro M127fw MFP printer. The font size is too large on the print job. How can I reduce the font size for my iPad Air printing?

  A big thank you to ice at the service of the cloud, the problem has been completely resolved.
  Thanks to the team