LaserJet 1022n pilot Wireless does not work for Windows 8

Similar Questions

• router Wireless does not work after Windows Update

  I have a router WRT54G V.5. Windows Vista Home Premium did an automatic update. Now wired connection works, the Wireless does not work. Ask key, but when nothing happens. Action of diagnoses has been canceled. I disabled and enabled, does not. Any help will be appreciated!

  Take not of the Settings (SSID and WEP/WPA Key) wireless router...

  Know the wireless settings follow this link

  Once you know the wireless settings are attempting to connect to your wireless network...

  XP:
  Click Start and goto the control panel and double-click on network connections, right click wireless network connection and click Properties.
  Now, in this window, click on the second tab of wireless network and give a check mark on "use windows to configure my wireless" and then delete all network names present in the preferred networks window. Then click OK...
  Right click on the wireless again network connection and then click View available wireless networks and try to re - connect to your network...
  Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
  It will connect...

  Vista:
  Click Start > Control Panel > Network and Sharing Center > manage wireless networks, here to remove any present network and close the window.
  Click on connect to a network and try to re - connect to your network, he must ask for your key/password network, enter the network and password correct key and click on connect...
  It needs to connect... Once you're connected, you must restart the computer, it needs to connect to the Internet...

• Wireless does not work after Windows Update

  Original title: Wi - Fi internet connection is DISABLED since yesterdays upgrade, how can I get that back on?

  Since a windows update yesterday, before closing my laptop... I am not able to access the Internet.

  My without wire is off and I can't turn it back on.  Toshiba wants $99 for technical support.

  Hi Sheryl,

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  Wireless does not work after a windows update.

  1. what day that was installed?

  You can check the update in the update history:

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  2. do you receive any error messages?

  3. What is the model of the computer?

  The problem may be with the drivers or with the device.

  I suggest that you refer to the procedure described in the site:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• HP OfficeJet Pro 8500 A909: Hp Solution Center does not work for Windows 10 installed

  Since windows 10 my HP OfficeJet Pro 8500 A909 will not scan unless I run through the diagnostic tool and then do a test of loading scan. I used to do that through the HP Solution Center, but this doesn't seem to work. His charges and must charge bar but just Flash when you click it. I ran all online and diagnostics Windows, uninstalled and reinstalled on HP website and downloaded new drivers. It still does not work. Windows tells me that all drivers are up-to-date. Out of options.

  Hello

  Could be updated Windows 10 recently. Please check your history of updates of Windows 10 and remove/uninstall kb3132372

  Note: Microsoft is working with Adobe now:

  https://support.Microsoft.com/en-us/KB/3132372
     
  To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

  Kind regards.

• WXP pilot Wireless does not work on Satellite U400-10N

  I have Toshiba Satellite U400-10N.

  I formatted vista yesterday and installed WXP on this, but I can t get wireless to work.
  I ve downloaded the drivers from the Web from Toshiba site, but they are for the Realtek and Atheros chipset, so I read about it and thought that it is "Intel Wireless WiFi Link 4965AGN" I.

  I tried to install this driver, but it does not work.
  Can anyone help or known why?

  Please check this page from Intel:
  http://support.Intel.com/support/wireless/WLAN/sb/CS-010623.htm

  Here, you can identify your WLan card and able to download the compatible driver and software.

  This page has been very useful in my case, check it out

  Good bye

• Family timer does not work for Windows 8

  I can view the activity report and check the websites visited, but everything doesn't seem to work properly.  The time settings and the curfew does not work and when I view the reports using pc is far from what is used.

  Hello

  I would like to you can check this post about delays on parental control. Refer to the post of Eugene_R.

  Time does not

  Moreover, in a resolution of the initial problem, I suggest that reconfigure you the account user. Here's how:

  In Windows 8, you can use accounts of Microsoft as a user. You just link the Microsoft e-mail account to the new standard user. Follow these steps:

  Note: Make sure that you have an internet connection to create a user with a Microsoft account.

  1. press Windows key on your keyboard to access the applications screen.

  2. tap create an account (you will be redirected to search application screen automatically).

  3. click on settings (second option with the gear icon).

  4. click on create an account on the selection to the left pane. (You may be prompted for access admin select an admin user, and then enter the administrator password).

  5. in the account management window, click Add a user account.

  6. you will be prompted to add a user, enter the Microsoft account email address in the text box then click on Next.

  7. check This is a child account? Turn on family safety for PC usage reports.

  8. click on Finish.

  After you create the child account, you can then go to the Family Safety website, log in using the parent account and then manage restrictions and control of your child options.

  Second: In case you want your child free of any restriction which actually an adult account, you will need to just make sure that he or she is not a member of the safety of your family to check on the Family Safety website. To remove a child, go to manage the list of the members of the family. Select the account you want to delete by checking the box on the right, click on remove, then confirm by clicking on remove again.

  In case you have problems after deleting the account as a child, please update the personal data of the account by connecting to https://account.live.com/summarypage.aspx.

  Note: If you are currently logged in using your account, you must open a session and re-enter your child's account.

  Thank you.

• Webcam does not work for Windows 8. Help, please.

  Hello

  I use the webcam on my laptop a bit, but recently, it has been in place. He decides little when he wanted to work. However, last week it stopped altogether. I went into Device Manager to try to understand what could be the issue but my phone shows No imaging devices!

  My phone is a Samsung NP350EC A0CDX.

  Can someone help me please get my webcam working again, because it is very important, and I can't afford to buy one that will clip on my laptop as a substitute.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• My fingerprint reader does not work for windows log on

  
  

  aiv1bct,

  Please take a look at the following file.

  Find, open, and read the file named: simple instructions for upgrade HP SimplePass

  NOTES

  • Order of events is important, in other words, you must reinstall the driver first and then deal with the software.
  • Version is important - use the latest 6.x version available in the help document.
  • If all else fails, you can try to create an additional administrator account – allows to implement your SimplePass.

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• Photosmart 6520: Wireless does not work for HP Photosmart 6520 on 5G, but works on 2.4

  my all-in-one photosmart 6520 connects wireless network 2.4, but does not recognize nor can I manually get to recognize the 5 G wireless. I have 2.4 to print. This printer not 5 G is compatible? or is there a way to force it to recognize and work with 5G?

  The Photosmart 6520 wireless works on 2.4 GHz channels, it does not support 5 GHz. If your router supports both it should be possible to set up to allow communication between the computer on the 5 GHz access point and the printer on the 2.4 GHz band.

• Pavilion 15 n096sa: Hp Pavilion Wireless does not work after Windows 10 critical update

  HP laptop Pavilion 15 PC - product number: F4T58EA #ABU - 10 family 64-bit Windows

  Hi all

  I have recently upgraded to windows 10 and had not had any problems until one evening internet dropped out. After a while I realized the wifi adapter did not work. I tried to update the driver, nothing helps. The unit displays under working properly in Device Manager but does not appear in the network connection settings.

  I tried a system restore point that solved the problem but then Windows 10 updates (updated critical around 23 September 15) and wifi no longer works again. I noticed there was recently a couple of new updates of the driver (sp72517), but these have not solved the problem.

  I can still connect to the Internet using a LAN cable, but need help need help I can't easily use a LAN due to the location of routers. I've updated the Hp Wizard and I tried troubleshooting etc but still no joy.

  The elbow of any help would be appreciated gratefully.

  Thanks TT

  Hi all

  I managed to find a solution to this problem online, don't know how or why it worked, but it solved my problem and I hope that it might help others.

  I uninstalled and deleted the files from the wireless driver, then uninstalled Kaperskey and restarted my laptop. Then I went into Device Manager and manually updated the network drivers (think I might have restarted again here) and sucsess hey presto, all that remained to do was to reinstall kaperskey.

  Hope this helps someone else with a problem with wifi Realtek Pavilion.

• Update does not work for Windows Vista Ultimate Edition

  During the 2 days Windows Update fails on my laptop, with Vista Ultimate fully patched and updated on 04/07/09. I can't find anything that was instaled in recent days, with the exception of a definition for Windows Defender update, that could cause this problem. Here's what the error log when WU fails:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: svchost.exe_wuauserv

  Application version: 6.0.6001.18000

  Application timestamp: 47918b 89

  Fault Module name: Cabinet.dll

  Fault Module Version: 6.0.6001.18000

  Timestamp of Module error: 4791a63d

  Exception code: c0000005

  Exception offset: 00005891

  OS version: 6.0.6002.2.2.0.256.1

  Locale ID: 1033

  Additional information 1: 2fe6

  More information 2: 41a941e929968708854a18a13efb2228

  Additional information 3: 2d 09

  Additional information 4: 9e6f6eb1fb900af63ef99522d1da56b0

  A weird symptom of the accident, is that it also disables Aero.

  Hello Epa80,

  I hope you do well. This problem may occurbecause files (BITS) Background Intelligent Transfer Service status are corrupt. This problem stops the host process for Windows Services.  For more information about this error and how to resolve this problem, follow the steps described in this article below:

  http://support.Microsoft.com/kb/939159

  Please follow the steps and let me know if it works.

  I hope that solves your problem.

  Thank you.

• Customization specification does not work for windows r2 std 2012

  I have a windows 2012 r2 std model VM and when I am trying to deploy a VM from her and the application of the specification to customize.

  After that when I turn on the deployed VM I get error on it and it does not allow me to proceed.

  -What someone faced this kind of problem.

  It is a known problem. Please go through the below items.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2036372

  https://support.Microsoft.com/en-GB/KB/2693187

• Oracle E - Business Suite 12.1 facilities does not work for windows 7 64 bit

  Hi guys,.
  I've tried for the last 10 days to install Oracle EBS 12.1 on windows 7 64 bit. I installed the prerequisites. that is to say:
  1 MKS Toolkit 8.7
  2 visual C++ 2005
  3. I am installing the administrator user account, which is added to the Administrators group.
  4. once the installation is launched all the pre-checks are met.
  
  The Setup program displays the following error at the end of 33% after having decompress all the 237 files:
  
  RW-50004: Error Code when you run the external process. Check the log file for more details.
  Installation of database driver for instance running LIVE
  
  When I checked the log file I found the following error in the log file "C:\Program Files (x 86) \Oracle\Inventory\logs\cloneActions2011-06-05_02-30-16 PM.
  
  INFO: ERROR: file not found: C:\Windows\Microsoft.NET\Framework\v1.1.4322\CONFIG\machine.config
  INFO: ERROR: file not found: C:\Windows\Microsoft.NET\Framework\v1.0.3705\CONFIG\machine.config
  
  Please tell me what can I do?
  Thanks in advance.
  
  With regard to:
  Natacha amal Khan
  
  Published by: Natacha Amal Khan on June 7, 2011 23:20

  Salvation;

  EBS r12.1 certified not on windows 7. So I suggest to use certified platform

  Please see our previous post:
  Re: Installation of R12.1.1. on windows 7

  Respect of
  HELIOS

• Family Pack with upgrade 3 license code does not work for Windows 7 Home Premium

  I bought Windows 7 Home Premium, with upgrade license 3 Family Pack.

  Yes, it is a genuine Microsoft product, bought at best buy original and worked fine on another PC.
  I tried to update one of my HP Pavilion yesterday which came with Windows Vista. Installation works well, but at the point where he asks me the license code, he says, it's the bad code and there is nothing I can do to go.
  Help, please.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Sound does not work for windows vista

  When I turned on our laptop today it says your audio hardware configuration has changed. You must reinstall soundmax.  I went on the factory site and downloaded the player and the error still occurs.  How can I fix it?

  It affects only the system files, not personal files, see the following topic for more information about the system restore:
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions