LaserJet 451nw: printer HP Laserjet 451nw double best

Similar Questions

• LaserJet P1102w: Double-sided printing will not turn off

  Even if double-sided printing is NOT selected in the printer properties, printing all ask for double-sided printing.  So if I go to print a single page printjob, the computer asks to have the blank page that was 'printed' just to get back in the tray.

  How can I get this fixed?

  Hi @Skunkeeper,

  Welcome to the HP Support forum.

  I understand that you use a HP LaserJet Pro P1102w printer with a Windows 10 computer and when you try to print a single page, the printer ejects a blank page and ten invites you to put in the tray, so the second side can be printed, even if double-sided printing is not selected. I would like to help with that.

  This really looks like a software problem. I would like to start by running this HP print and Scan Doctor. It is a tool that allows you to diagnose and solve the problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP laserjet 4700 double image with only magenta

  Hi all

  I have hp laserjet 4700 and if I make magenta print double image I change the cartridge but still once! any idea

  Thank you

  You're welcome, accommodate and retain the best ways to thank a Tech for a position are to click on the thumbs up button under the post, if their suggestion works, click on the accepted as solution button.

• MFP HP laserjet 400: Double side-scan

  Dear engineer,

  Please note that I want to copy the ID card back to back on a sheet of paper.

  I chose the option of the code and select (2 sides on 1 side) and change the site id, but the two parties appeared on the same side on a sheet of paper

  I want to copy next double of the sheet of paper.

  Thank you and best regards

  Looks like the copy ID feature does exactly what his documented to:

  "Use the ID Copy feature to copy both sides of the identity card or other small documents, on the same side of a sheet of paper."

  So if your goal is to copy an ID card that is unique to two sides of a sheet of paper, then you should not use the feature ID Copy.  As I read the copy feature ID only creates single face exit.  He succeeds in taking a scan on one side of the ID, records in the memory, takes a 2nd scan across the ID, merges the two scans to overlap eachother (HP will ask to move the ID to a 2 for the 2nd side location) and then produces a single output from the front.

  To make a copy of both sides of the glass scanning shoud you use copy normal duplex as shown on page 56.  The printer should behave the same if a document is loaded in the ADF or on the glass for this feature.  If you use the glass then the printer probably will be asked to return the document after the first scan is complete.

• photo printing - what is postcard double in inches?

  Hello, one of printing in the Photos program options is "double postcard" - what in inches? I can't find it anywhere when I google it. Thanks in advance...

  Select the paper size in any other application, and you will get the dimensions of the postcard Double:

  

  

• Office has increased in size and the print size is almost double.

  Original title: Hi, my office decided to increase in size - how to decrease (printing is almost double than it should be).  Thank you.

  Printing has suddenly increased - how I reduce to normal size please?  Thank you.

  Hi GlenisRhodes,

  1. What is the brand and model of the printer?

  2. This occurs when you try to print from a specific program?

  3. when the problem started?

  4. did you of recent changes to the computer?

  You can try to change the resolution of the screen and check.

  Change the screen resolution

  You can also try to print a test page and check.

  Print a test page

  Hope this information is useful.

• How can I print front and back (double-sided)?

  I hope someone can help me... it's a very simple procedure that I do not know how to do it on the new vista software! Help! Everything I need to know how to do is printed on the front AND back. In my office, no one can understand it... Help, please!

  This is a question for the manufacturer of the printer - printing on two sides of a sheet of paper is usually controlled by the printing software and drivers.  As you don't know the brand, model and version number of your printer, I can't provide you with a link to their support site (but it should be pretty easy to find).

  Here is a generic article on printing double-sided in Windows: http://www.ehow.com/how_2253127_print-double-sided.html.

  Here is another article on printing double-sided in general (the configuration of the laptop) and in Word and WordPerfect: http://www.law.duke.edu/computing/printing/doublesided.

  Here's a last article on how to print two-sided manually (assuming you do not have the equipment to do it automatically): http://h71036.www7.hp.com/hho/cache/548309-0-0-225-121.html.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• How can I print A4 borderless with double-sided printing?

  I have a HP Photosmart/premium printer and print booklets in Word 2010. When I do, the text and the photos come out compressed because the printer is put into a border on the right edge. I need to print without margins, but with duplex printing using A4. I get a message saying that these 2 are incompatible. How can I replace it? If I print in A4 without border, text, and pictures look correct (the same as on the screen), but I need to print duplex as well.

  Hi Katiepic,

  Borderless printing and double-sided printing is not supported at the same time. You have to manually duplex work by putting it into the paper tray to print on the back.

• How to print a booklet A6 (double-sided) on A4 paper?

  I googled a lot but could not find the right answer. I designed a brochure on paper A6 I want to print on A4 paper. I got in regard to printing to a pdf format A5 and then reprint which (if you get four pages / two slides) on an a4 page. I want my book to be printed like this:

  

  Could someone help me?

  ID cannot print two places since a one - up file. If your printer cannot do (or more likley to a PDF), then you place the file twice in an A4 paper and print that. "" To help that you can use the script to InDesignSecrets "Blog Archive" Zanelli releases MultiPageImporter for importing PDF and INDD files and run it twice.

• PrintPagesSilent using to print the PDF with double-sided printing and color

  The use of VBA with Acrobat 9.0 code library.

  I have an application that prints the PDF files that are stored on a network drive.

  I can print PDF files using PrintPagesSilent, which prints the file to the default Windows printer.

  However, I want to be able to specify in the VBA code if I want the file in duplex or printed in color.

  I can do this in access using the Printer.Duplex = '2' or Printer.Color = '2', but they do not change the windows default printer settings and therefore do not change how PrintPagesSilent prints.

  Can someone shed some light on how I can set these parameters to accomplish what I need.

  Or maybe another solution I didn't think.

  Figured out, or at least a work around.

  Found a VB code that can change Windows printer settings.

  All I had to do was create a module and then call SetPrinterDuplex before you print the pdf file, and then again to change it after.

  Here is a reference for anyone interested.

  http://support.Microsoft.com/kb/230743

• Pages with "GET /DevMgmt/Discoverytree.xml HTTP/1.1" unwanted printing on Laserjet 2015b

  I have a HP Laserjet 2015 d in WIN7 (32 bit) with a USB connection.  I keep getting unwanted with pages printing:

  "GET /DEVMgmt/Discoverytree.xml HTTP/1.1".

  "Host: 127.0.02:8080".

  I found similar positions to the other HP LaserJet but their repair method did not work for me, because I don't have an option "Printer Status notice" which is noted below.

  --------------

  (repair method mentioned in another post for the 2055dn printer)

  Please click on start-->

  Printers and devices-->

  Double-click the printer (PCL 6)

  Double click on customize your printer

  Click device settings, and then check the list and together following: -.

  Notification of printer status: DISABLED

  Apply

  Ok

• How can I print barcodes on a laserjet 3015

  replaced a Laserjet 3005 with a Laserjet 3015.  Barcodes are not printing on Laserjet 3015.  Is it possible on this model? Is there a bar of MEMORY I need to add?

  Hi sharonuspc,

  As this is a commercial laserjet printer you will have the best chance to get a response if you post your question on the following site.

  http://h30499.www3.HP.com/T5/business-support-foru ms/ct-p/business-support

• Printing problems with Windos 7 and HP Laserjet 6 p

  I recently bought a computer with the Win7 OS.  I plugged my printer HP Laserjet 6 p via USB cable to a USB-parallel adapter cable.

  Printing has been sporadic at best; a print job usually gets to the queue, but no further.  I came to believe that the problem is with the USB-parallel adapter, because the printers and peripheral function displays icon (yellow triangle with a point of exclamation) problem on the IEEE-1284 controller.

  I was not able to locate a driver for this device.  Windows troubleshooting utility does not come to the top with a solution either

  I am happy for all the advice on the installation of the driver or other solutions to this problem.

  http://catalog.Belkin.com/IWCatProductPage.process?Product_Id=20651

• 7612 HP all-in-One: software OfficeJet Pro 7612 interferes with the LaserJet P1505n

  Since the installation of the software for my new OfficeJet Pro7612 all-in-one, whenever I have print on my next LaserJet P1505n error message appears:

  

  Basic printing product despite the message. The expected state of the LaserJet messages do not seem to appear (for example, the message of the insert to envelopes paper) or double-sided printing instructions.  Manual double-sided printing seems to be unreliable. I uninstalled the 7612 and the problem disappeared. Reinstalled the basice 7612 drivers and he returned. All the solutions to this problem?

  Hey @Joe-TN,.

  @Sunshyn2005 is not in the office today, but I can certainly help you until Sunshyn2005 is back in the office on Monday.

  To clear your Laserjet queues:

  If the P1505n is connected to your printer using a USB cable, remove it.

  Close all other programs that you have open.

  In your search type in printers bar and open devices and printers.

  Right click on all the P1505 listed icons.

  Click on remove the instrument.

  Repeat for all the other icons of the printer listed.

  In your type of Services Research and open Component Services.

  On the left, click Services (Local).

  Right click on on the right print spooler.

  Click on stop.

  Open your drive C:\, then Windows, System 32, coil, and printers.

  Delete everything in this folder.

  Return to the Component Services window.

  Right-click on print spooler.

  Click Start.

  If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add your queue.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Color LaserJet 2605dn

  I have a HP Color LaserJet 2605dn. It worked very well with the Microsoft Vista operating system. I just bought a computer with operating system Windows 8 home and now my printer won't do the double sided printed (not the manual double-sided, but printing double-sided on its own). Is there a driver out there who can help with this? Your Web site was an option for Windows 8 when looking for drivers.

  The default value is the duplexer is set to "not installed".  Go to the devices folder and printers, right click on the 2605, select printer properties, the device settings and set theduplex "installed" unit, apply.