How to print a booklet A6 (double-sided) on A4 paper?

Similar Questions

• How can I print A4 borderless with double-sided printing?

  I have a HP Photosmart/premium printer and print booklets in Word 2010. When I do, the text and the photos come out compressed because the printer is put into a border on the right edge. I need to print without margins, but with duplex printing using A4. I get a message saying that these 2 are incompatible. How can I replace it? If I print in A4 without border, text, and pictures look correct (the same as on the screen), but I need to print duplex as well.

  Hi Katiepic,

  Borderless printing and double-sided printing is not supported at the same time. You have to manually duplex work by putting it into the paper tray to print on the back.

• How can I print front and back (double-sided)?

  I hope someone can help me... it's a very simple procedure that I do not know how to do it on the new vista software! Help! Everything I need to know how to do is printed on the front AND back. In my office, no one can understand it... Help, please!

  This is a question for the manufacturer of the printer - printing on two sides of a sheet of paper is usually controlled by the printing software and drivers.  As you don't know the brand, model and version number of your printer, I can't provide you with a link to their support site (but it should be pretty easy to find).

  Here is a generic article on printing double-sided in Windows: http://www.ehow.com/how_2253127_print-double-sided.html.

  Here is another article on printing double-sided in general (the configuration of the laptop) and in Word and WordPerfect: http://www.law.duke.edu/computing/printing/doublesided.

  Here's a last article on how to print two-sided manually (assuming you do not have the equipment to do it automatically): http://h71036.www7.hp.com/hho/cache/548309-0-0-225-121.html.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• HP OfficeJet X451dw - no printing double-sided on A5 paper

  Hello

  I recently received this printer for Christmas. The printer works fine and fast perfectfully! But the only problem I have with this is that it would not print duplex (double-sided printing) on A5 paper, but with A4 - it works fine.

  Also, the printer is network related and there is software of administration Console installed on the server that allows the administrator to change the settings of the printer, checking the ink cartridge and etc...

  Much help would be appreacted!

  Thank you very much

  Ben

  Hi Ben,

  Which should, A5 is not supported for automatic duplex printing.

  You can find any paper sizes supported on page 59 of the guide user below:

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03640111-4.PDF

  As you can see in the graph, A5 is not supported for automatic duplex printing

• How to print a booklet without the back being upside

  I'm looking for a small brochure that would be printed on A3 paper front and back. So, essentially, offering 4 x A4 pages of information available to landscape.

  When I select print settings "Booklet" and 'Automatic Rotation of images within each worksheet' 'Front' page is the right path, as it is the Center pages, but the page back are upside down. Is anyway to "manually turn" pages?

  Not with the reader. You need Acrobat for that.

• PrintPagesSilent using to print the PDF with double-sided printing and color

  The use of VBA with Acrobat 9.0 code library.

  I have an application that prints the PDF files that are stored on a network drive.

  I can print PDF files using PrintPagesSilent, which prints the file to the default Windows printer.

  However, I want to be able to specify in the VBA code if I want the file in duplex or printed in color.

  I can do this in access using the Printer.Duplex = '2' or Printer.Color = '2', but they do not change the windows default printer settings and therefore do not change how PrintPagesSilent prints.

  Can someone shed some light on how I can set these parameters to accomplish what I need.

  Or maybe another solution I didn't think.

  Figured out, or at least a work around.

  Found a VB code that can change Windows printer settings.

  All I had to do was create a module and then call SetPrinterDuplex before you print the pdf file, and then again to change it after.

  Here is a reference for anyone interested.

  http://support.Microsoft.com/kb/230743

• HP Photosmart, 7525 how to print photos from iPad to use the main paper tray.

  I have pictures of troubled impression of the main plate. He continues to try to use the smallest. Photo tray
  I tried selecting the main tray by default and will not work.
  With the help of hp photosmart 7525

  Hello

  If you use AirPrint, the default setting is to use the photo for the photo tray and the main tray for all other printing. AirPrint allows very little flexibility in this regard.

  To increase the flexibility around paper selection and the plateau, you will need to download the HPe-Print application on the app store and use it.

• How to print back to the T-shirt iron-on paper?

  I was looking for a method to print to the rear.  I T-shirt iron - on paper, but to make it work, the characters must be printed backwards, to the mirror-image format.

  In this way, when the page of iron is used, mailbox transfer for the T-shirt properly and can be read normally.

  I have a HP OfficeJet 6500 E710a.

  The only way I can think is to print on a transparency, and then use the copy to the printer function to copy backward, on the page of iron.

  Is it possible to make the printer actually print the characters backwards?

  Thank you very much.

  Alex

  OK, you can install another driver as follows: go devices and printers folder, right click on the HP Officejet 6500 and select properties from the Printer Ports and see which port is affected.  Make a note of the port, and then click Cancel.  Now click on add a printer, Stop, the printer that I want isn't listed, add a local printer or network printer with manual settings, then use an existing port, (select the port found earlier), next.  At this point, click on Windows Update in the lower right and wait a few minutes for the list to repopulate.  During the updating of the list, select HP (Hewlett-Packard no) for the manufacturer and the HP Deskjet 6500, and then click Next, finish.  You can now right-click the Deskjet 6500 and select Printing Preferences.  Select the appropriate paper type, and then select Finish and the Mirror Image box, click apply.

  You can now select the Deskjet 6500 to print the mirror image.

  

• Double-sided printing OK except page 1

  My Brother MFC-J470DW print double-sided PDF OK EXCEPT the first page comes out in single-sided. Page 2 at the end it is double-sided. How can I get all THE double-sided pages?

  Hi sdsBrooklyn,

  Are you trying to print two-sided sided printing | Adobe Acrobat, Reader or a booklet print Print booklets | Adobe Acrobat, Reader?

  Please refer to the parameters.

  Kind regards

  Meenakshi

• LaserJet P1102w: Double-sided printing will not turn off

  Even if double-sided printing is NOT selected in the printer properties, printing all ask for double-sided printing.  So if I go to print a single page printjob, the computer asks to have the blank page that was 'printed' just to get back in the tray.

  How can I get this fixed?

  Hi @Skunkeeper,

  Welcome to the HP Support forum.

  I understand that you use a HP LaserJet Pro P1102w printer with a Windows 10 computer and when you try to print a single page, the printer ejects a blank page and ten invites you to put in the tray, so the second side can be printed, even if double-sided printing is not selected. I would like to help with that.

  This really looks like a software problem. I would like to start by running this HP print and Scan Doctor. It is a tool that allows you to diagnose and solve the problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• DeskJet Pro 6230: double-sided printing

  Recently should a printer 6230. First time I tried duplex printing, it was fine.

  Now just prints individual sheets (no double-sided). Desktop HP printer Assistant does not work that he doesn't show me the pages of help on any topic at all.

  Help appreciated.

  Thanks for letting me know that damienfosseyof information.

  It looks like a software problem.

  You could always restore the printer in when everything worked correctly.

  How to use Windows system restore?

  I suggest to uninstall and then disable all the start up programs and temporarily disable the Antivirus software to see if that is causing the problem. How to use MSCONFIG. Click the Startup tab and click Disable all.

  Reinstall the most recent drivers. Series of HP Officejet Pro 6230 full feature software and drivers ePrinter.

  Ask OKI Print this Long edge of page and print short edge explained.

  I hope this helps. Thank you.

• Print double-sided work don't not C310

  My printer features show automatic double-sided, but now only prints one side. That semed to happen after I had replaced an ink cartridge. All the parameters of the printer are marked for automatic two-sided printing, but it now only prints one side. The second page prints backwards as if he thinks it is printing 2 sides but it's a second piece of paper instead of duplex printing. How can I solve this?

  I remove and uninstall if the first printer, but I do not recommend this CD. The CD can damage as it contains that the version of the software it was burned with, which is probably a version date than we have on the Web site.

  Me know how goes the Chickadee!

  -Spencer

• more than 8600 double sided printing

  How can I turn off the double-sided printing 8600 more.  There is NO setting for printing.  I've reloaded the software on my Mac and still no settings anywhere.

  Hello
  Please follow the steps below to disable grubbing double-sided:

  The application used to print, click the file menu and select print. The print window is displayed.
  NOTE: The print window might be minimized. Click the blue triangle next to the name of the printer or on the button view details to see all the available parameters.

  In the print window expanded you will find next to Copies the checkbox for duplex. Uncheck the box.
  NOTE: If the check box does not appear in the specific application print dialog box, skip this step.

  Click on the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  Select layout from the drop-down.

  Set the duplex as Off.

  You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.

  Kind regards
  Shlomi

• Why the print window Firefox does not provide an option to print double-sided?

  My HP printer is able to print double-sided, which saves paper, but the print window of Firefox offers no possibility of double-sided printing. (I recently spent IE, this fact.) I have to do something to add?

  You can post a screenshot of what you see?

  The relevant printing for your printer options appear under properties AFTER you click Print and select the printer to use.

• HP7612: Unable to print double-sided of the ipad or iphone to HP 7612

  Buy new HP 7612 large format printer and connected to the WiFi network at home.  Discovered that I can print two-sided PC, but cannot print two-sided to devices on the same network (iPad and iPhone).  Printing with printer device iOS is located and double faces and black only options are available.  When I select print alone.  When I select double-sided is it print the device but the printer does nothing.  I wish I could print the iOS devices double-sided forms to save paper.  Please notify.

  Understand this myself.  Had to go to printing on the screen of the printer and update the software of the printer.  Printer downloaded the new software and rebooted and one that he reconnected to the network that I could print in double face of ipad and iphone.