LaserJet 9040dn universal driver issues

Similar Questions

• HP Color LaserJet 4600 PS: Driver HP Color LaserJet 4600 PS printer Windows Server R2 2012 problem

  Hello team HP,

  We used the driver 32 bit printer "HP Color LaserJet 4600 PS" to write the PDF file using Acrobat Distiller in Windows server 2003 operating system.

  But now, we have migrated our production environment for Windows Server 2012 R2 64-bit operating system and using the 32-bit printer "HP Color LaserJet 4600 PS" driver in the operating system Windows Server 2012.

  Is the driver support 32 bit printer "HP Color LaserJet 4600 PS" Windows Server 2012 R2 64-bit operating system?

  If it is not supported then what printer driver will support the Windows Server 2012 R2 64-bit operating system?

  Help us to this problem as soon as POSSIBLE and its very high priority for us.

  Kind regards

  Gaudin. B

  Hello

  CLJ 4600 is not supported on Windows Server 2012. However, you can use HP Universal Print Driver (UPD) for print on CLJ 4600 of Win Server 2012.

  Here is a list of the printers supported with the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04324001#N106AD

  Specification of the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04380141

  Thank you

• Display card driver issue (Digital Signature of the unverified driver)

  In Device Manager, I have a question, marked by an icon of yellow exclamation next to "ATI Radeon HD 3200 Graphics" under the heading "graphics cards".  When I right click and go to properties I see the message: "Windows cannot verify the digital signature for the drivers required for this device. A recent... (Code 52) ».

  My graphics card is built into my motherboard, which is the GIGABYTE GA-MA78GM-S2H Micro ATX AMD.

  I have not install my own drivers, I let Windows 7 install drivers for me.  What do you recommend to resolve this unsigned driver issue (e.g. should I look for an ATI driver perhaps?).

  Thank you

  Hi BDub2

  Welcome to the Microsoft Answers Forum!

  We would like to know if you've made any recent software or hardware changes made to your computer.

  We receive this error if the driver has been modified. I would recommend with these methods

  Method 1:

  Uninstall and reinstall the device in Device Manager. Steps to uninstall the device:

  i. click on start, type devmgmt.msc and then on enter.

  II. Locate the display adapter device

  III. right click on the device and select uninstall

  IV. restart the computer to make the changes happen

  Uninstall and reinstall the card program and features. Steps to follow

  i. Click Start and select Control Panel

  II. in the Control Panel double-click the "Programs and features" icon

  III. here you can find all the programs and items that are installed in Windows 7.

  IV. to remove the adapter click once on the program and then click Uninstall/change, and follow the prompts.

  v. install the last driver on the manufacturer's Web site. Download the Windows 7 compatible display driver.

  Link: http://support.amd.com/us/gpudownload/Pages/index.aspx

  Method 2:

  Run a scanner online to check any malware or virus activity. Links below will help you to scan on the computer.

  http://www.Microsoft.com/Security_Essentials/

  Download

  Link for reference: what is a signed driver?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-signed-driver

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I check the toner level in my HP Laserjet 1320 with driver W7?

  Original title: HP Laserjet 1320

  How can I check the toner level in my HP Laserjet 1320 with driver W7?

  You probably can't, HP does not have software win7 / drivers, so you use drivers win7 default, which has all the features of the HP software

• DUPLEX - HP2550 COLOR LASERJET-WINDOWS 7 DRIVER

  HOW TO ENABLE DUPLEX PRINTING FOR AN HP2550 COLOR LASERJET USING THE DRIVER OF WINDOWS 7? IT HAS WORKED ON XP BUT NOT WITH WINDOWS 7

  I see what you mean with the monochrome to print the PCL driver.  The PS driver worked for color and duplex (6.1.7233 driver version) send a HP Color Laserjet 9500.

  Don't forget to print a configuration page of the device and make sure that it detects that the duplex unit is installed.  If it does not appear on the configuration of the device.  Turning the unit off, remove the duplex unit, and reinstall making sure that all connections are properly installed.  Start-up the device, print the configuration page and make sure that it is listed.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• I lost my hp laserjet 1005 p driver can you send me the driver?

  I lost my hp laserjet 1005 p driver can you send me the driver?

  Hello:

  Here is the link to the support page and drivers for your printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3435675&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3435674

  Paul

• LaserJet pro 200 driver installation error

  We have a Server Windows 2012 that I can't seem to get the driver printer laserjet pro 200 M276nw on.  He goes through the process of driver download and in the end gives me one error of installation - no further details.  Also, trying to download the print driver, it seems locked somehow all printers on the network.  I had to reboot the server for the printers run again.  Any ideas what could be the problem?  I've disabled our anti-virus and tried to download the driver print, but still got the same message.  Currently, the only way I can get the Laserjet Pro 200 to print is to use the universal print driver.  Thank you.

  3022 wrote:
  

  We have a Server Windows 2012 that I can't seem to get the driver printer laserjet pro 200 M276nw on.  He goes through the process of driver download and in the end gives me one error of installation - no further details.  Also, trying to download the print driver, it seems locked somehow all printers on the network.  I had to reboot the server for the printers run again.  Any ideas what could be the problem?  I've disabled our anti-virus and tried to download the driver print, but still got the same message.  Currently, the only way I can get the Laserjet Pro 200 to print is to use the universal print driver.  Thank you.

  Is it the driver of your trying to get?

  Pilot product page...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4138 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5097654 #n187

  Driver Windows 2012

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kJ-107843-4 & CC = US & DLC = in & LC = on & os = 4138 & Product = 5097654 & sw_lang =

• LaserJet 5 C3916A: Driver for windows 10

  Drivers are available for Laserjet 5 on Windows 10

  Just use the universal pcl5 driver that will work very well.  With this printer, connection to the computer is more a problem.  If you use a parallel cable, you will need to go into Device Manager, click ports, and then double-click the lpt port to which you connect the printer.  Click device settings and change the medium box default is to check for the 3rd area of use all stop available and also click legacy plug-and-play.  This will allow the printer work with windows 10.  If connected using a different method and cannot load the driver, report with how connected.

• Help! Problem using HPSCAN.exe or the TWAIN for HP Laserjet Pro cm1415fnw driver using Windows 7

  I used the HP Laserjet Pro cm1415fnw for over a year without problem.  When I first bought the unit, I was using a Dell with Windows XP desktop computer and connected to the printer via the USB port.  I was able to print and scan from my computer, even in applications that use the driver scan TWAIN such as Word, Acrobat, etc.

  I've since upgraded to a HP slimline s5-1160 computer using Windows 7.  I installed the software my installation CD Laserjet is no problem.  The printer is connected to the computer by USB port.  I can continue to print without problem.  However, I am is no longer able to scan using the HP (HPscan.exe) software, or applications that use TWAIN scanning driver such as Word, Acrobat, etc.  When I try to do, it takes a lot of time before he asks me which scan TWAIN driver to select.  When I select the MFP from HP cm1410 series, the program hangs or returns to the State wherever it was before I tried to scan a picture in a document from the program.

  I can scan however successfully using the Wizard Windows Scan / Fax or if I choose "Devices and printers" in the Start Menu and select 'Start scan' in the menu after right-clicking on the HP printer icon.  However this option restricts my use of the scanner - I can't scan to PDF and I can scan several pages in an OCR application.  I have to analyze on a JPG or TIF or PNG.

  What to try to solve this problem, I did the following without success:

  1. Uninstall and reinstall the drivers and software complete (and using the most recent version on the HP site)
  2. Change ETIOU USB ports
  3. Run the HP scan diagnostic utility, which seems to show an error to the WIA, scanning stage and then recommend that I have uuninstall and reinstall the full software.  When I skip that and allow it to check for TWAIN scanning, it gives me a similar error, suggesting I use the latest version of the drivers (the driver that I use is v 3.0 dated 12/11/2009) so in this case the utility of diagnostic scanning HP provides NOT a fix for this problem other that uninstalling and reinstalling , which I did several times without success
  4. Contact HP support for the computer and the all-in-one (which as I understand it there's different support staff).  Staff of the printer claims it's a software problem and that the staff of the computer must be able to resolve the issue (something not having "launchpad" installed correctly.  When I communicate with the staff of the computer, they say it is a printer driver problem.  So I'm at a standstill
  5. I studied the HP support forums to see from this link - http://support.hp.com/us-en/document/c02661093 - if you can't scan from software HP you can use programs that rely on WIA (Windows Fax and Scan) drivers that I already know I can do it, but implies that HP doesn't have a solution to find out how to scan using their own software!

  My gut tells me that he is one of those problems that many others perhaps, but for which there is no viable solution.  It is possible that during the uninstall and reinstall the software, remains can stay behind that prevent the proper functioning of the drivers, but without knowing how to "clean up" specifically those remains before you reinstall the software, I am at a loss.  Oh and by the way, I also tried using CCleaner and Norton Registry Cleaner to try to clean up these remains, but that effort did not help.

  My question is basically this... or does anyone know of a fix for this problem should I resign myself to use the Wizard Windows Fax and Scan to scan documents and pictures, and forget about using TWAIN programs like HP seems to suggest?  I think that because I use a HP printer/scanner and a HP with Windows 7 computer, this problem should NOT be a problem!

  Hi Radiopeople,

  Follow the steps below to check the WIA Service:

  1. type services.msc in run or search and files program

  2. scroll the page up to the WIA Windows Image Acquisition

  3. make sure that the service is running. Click on stop and then restart to ensure

  4 restart the computer

   

  Restart the services of dependencies:

  1. Click Start, in the search box type 'service ' without quotes.

  2. scroll down until you see Windows Image Acquisition (WIA).

  3. double click on it and go to the Dependencies tab.

  4-2 services must be listed.

  5. close this window and look for the remote procedure call (RPC).

  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.

  7. go to hardware detection kernel and Double click.

  8. set the Startup Type to manual and click on apply.

  9. you should be able to start the service by pressing Start.

  10 now, you are done and the Twain Manager must work and gives you is not a mistake.

  Check the dependencies or sous-dependances:

  Right-click WIA (Windows Image Acquisition) by selecting the first Properties , and then click the dependencies tab. It should list: remote procedure call and Detection of Harward Shell

  Under the CPP, it will then list DCOM Service Process Launcher point final RPC Mapper date back to the start all the items listed as dependencies or dependencies under WIA void list main services.msc and right click then

• Windows 7 LaserJet 6 p Driver does not

  I have Windows 7 and LaserJet 6 p/MP.  The updated Windows 7 driver does not work.  I noticed others with this issue?  Is there a driver available.  How can I get it?

  Hi Bob,

  I did some research today and found the MFG. cable has no Web site, or win 7 drivers for USB/parallel cable.  I almost gave up and came across this MSFT site:

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/cede656d-BAFA-47B2-b4e0-ed86b132e39d

  which mentions turned off bidirectional printing at the bottom of the screen of printer properties/ports.  BINGO!  It works fine now.  This is the problem all along, PRINTING BIDIRECTIONNELLE.    I don't know what this means, but it will print in my case.  I spent so many days of work on this issue, finally resolved.

  Thanks for your directional support on that.  I had to move in new directions, what happened to the response.

  Well being,

  Richard

• HP laserjet 1100 (MS) driver needed

  Have currently two computers to connect to a home network.   Both computers are using OS 7 (base unit #1 is 64 bit / other unit #2 is 32-bit). The two units have their own dedicated connected printer. When I try to install via the network of my unit #1 of printers laserjet 1100 (MS), the 32 bit OS 7 find the printer unit #1, but is not able to find a driver on Microsoft Update.  a driver is available LaserJet 1100 (not MS), which will not be installed.  Error message is not compatible.

  Visit Microsoft Update Catalog and found a driver for OS 7.  The driver downloaded on a USB key.  When I try to use this new driver, I get an error message "the INF file not found.

  No idea as to what my next move?

  Hi John,.

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  This can occur when you try to install an incorrect version of the driver on the machine. You can install a driver 64-bit on a 32-bit computer. Windows provide generic drivers, however, you must install the drivers supplied by HP. To do this, we can download it from the HP support Web site and try to install.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=14925&swLangOid=8&swEnvOid=4062

  Note: You must download the 32-bit driver for 32-bit computer and 64 bits for 64-bit computer.

  Hope this information was useful. Let us know the results once you have tried these methods. We will be happy to help you further.

• Windows 7 Laserjet 4 M driver

  Windows7 did include any family HP4 driver evaluation DVDs that I understand, but when I go to HP I had noticed too that I can't download drivers Laserjet 4 for XP or Vista families.  She only specify that we can get the installation of Microsoft Windows or auto update.  Is HP dependent on Microsoft to distribute drivers HP printer support and download?  Now how can I retrieve my driver HP4M Vista DVD?  or should I ask this question to Microsoft?

  Interestingly, I go to the Dell site to download older drivers for laptop (xp, vista, etc.) any time. What's happening here?

  r2d3 wrote:
  

  Windows7 did include any family HP4 driver evaluation DVDs that I understand, but when I go to HP I had noticed too that I can't download drivers Laserjet 4 for XP or Vista families.  She only specify that we can get the installation of Microsoft Windows or auto update.  Is HP dependent on Microsoft to distribute drivers HP printer support and download?  Now how can I retrieve my driver HP4M Vista DVD?  or should I ask this question to Microsoft?

  Interestingly, I go to the Dell site to download older drivers for laptop (xp, vista, etc.) any time. What's happening here?

  Printer Laserjet 4 M drivers (and many others) is actually available through the Windows Update process.  Try the following: go to the Printers folder, select Add a printer, select the appropriate port, and then when the dialog box "Has chosen a printer model" appears, select "Windows Update".  It will take a few minutes to download the new drivers available, have patience in this step we can believe the application is blocked, but it takes a while.  When the list reappears select HP as the manufacturer, there will be four choices or more printers Laserjet 4 / 4 M driver including 300 and 600 dpi of the Postscript versions.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• Portege 3940ct OS upgrade to function disabling Lan of XPSP2-Driver issues

  I have canvassed all discussions on this forum (and others) and have not found a solution to my problem. But, its obvious that major thinkers on Toshiba laptop configuration problems are here. So, if there is a solution to my problem, my best shot is in this forum.

  I'm pretty advanced in troubleshooting on this issue and the only thing that makes me think that there is a solution, it is it seems that others have installed XP on this unit.

  I have a ct of 3940; I upgraded from W2kPro to XPSP2;
  I downloaded and installed the bios, drivers and toshiba utils for unity on the Toshiba site.

  I have confirmed that all components of the system are operational. This includes a cdrom pcmcia, a network port replicator

  Everything is beautiful... EXCEPT:

  I have no network function.

  Indeed, I have basically no internet communication that it works either - even through the modem. The modem composed and as soon as the provider of the Internet service provider sends a handshake of communications, Windows XP Home edition do not recognize and disconnects. (I have not tried to fax a document - but I don't think that is relevant to the problem).

  Indeed, any type of network connection device, I try to install on the device, the device driver is not installed. This includes the network cards pcmcia (Wi - Fi 10/100 and base a - g) and usb based of a to g wireless adapters.

  Initially, after the installation of Windows XP Home edition, I found that I could not get a connection to the local network through network port replicator.

  To power on, loads WXP b/f, the network port replicator connection LEDs indicate a connection. Once expenses WXP, the port is disabled. [All other functions on the Port Replicator is operational under WXP].

  After logging in to Windows XP Home edition, Windows XP Home edition detects "new hardware" and produced through the driver install process. He then began to try to install an "unknown device". Ithen reports thatit can not locate a driver, then prompt for the user at the end of the routine of material to add.

  Device Manager reports several devices with yellow warning flags indicating that the device driver could not be installed.
  A look at the Details tab on the "unknown device" (the tab 'network device') indicates that the driver who has a problem is 'rasirda.sys '. Device Manager will not allow the device to uninstall.

  Other devices that have the yellow flag are:
  1 Toshiba FIR Port Type-D0
  2 IrDA Protocol (hidden feature)
  3 TCPIP (hidden feature)
  and a network card, I try to install.

  Facilities of device driver for network adapters, including the network port replicator controller (Intel 8255 x based pci Ethernet adapt (10/100) and his sister pilot), does not install (and will not uninstall until the device is removed).

  A glance at the window of the administrator system "Services" shows that essentially all the services necessary to support network/internetrleated services are disabled. Dependencies show that all these services depend, directly or indirectly, on "services.exe". This service will not run, and when the service is to begin, WXP reports that the service.exe does not start the program described.

  Topic 'Information System', a glance at the 'network' tab indicates that there is an adapter called "RAS Async card" disabled.

  My first approach to this problem was to reinstall the update of the Toshiba driver for the controller Toshiba FIR. Nothing helps.

  The next thought was simply to disable the function of TREE, but that cannot be done at the level of the bios... and well, as ambitious as I am, I didn't venture into the machine to determine if the IR controller could be disconnected or removed from the system board. [But if it is a possible solution, then I'll go...]

  As noted above, the only reason for which I hope is it seems that others have run successfully of XP on the 3xxx series porteges, who, to my knowledge all have this same IR port. Also, Toshiba has even written an XP driver for the device.

  What I find curious, among other things, is that Device Manager reports the Rasirda.sys device on the network adapter tab. I would have thought it would have been reported under the 'no plug and play' or the tabs 'system device. Whatever it is, it seems that Toshiba has implemented the infrared device such as a network adapter, or at least that's how WXP is grateful.

  I searched the internet, on the site of Toshiba, microsoft XP, knowledge databases, Web pages etc. and did not meet all the remarkable solutions se... Although I enjoyed some of the protocols troubleshooting - not my real ambition.

  Bottom line, is that I have this computer connected to the internet. With all protocols, and internet communications services disabled, even through the modem... Well, its ridiculous. I can't yet register WXP! Absurd is that! Well well its been late.

  I hope someone will have a solution/workaround solution that will solve this problem.

  In the meantime, I think that the next step is to start over and reinstall XP and try... again.

  I'd appreciate any help that anyone can gather.

  Hello Andrew

  It's always interesting that a lot of users are trying to install WXP on older models. Respect! The problem is that 3xxx Portege is not supported for Windows XP Home edition and I wonder that you have found the drivers and tools for this device. On Toshiba Europe don't here are some drivers for Windows XP Home edition and I assume you found the download of some of them on Toshiba U.S. page.
  Am I wrong?

  Sorry but I have no concrete solution to your problem

• MFP M277 dw: Color LaserJet MFP M277dw Pro issues with iMac

  I have a 2015 21.5 "iMac running El Capitan (10.11.3) and a HP Color LaserJet Pro M277dw MFP that falls in offline mode when it is idle for a while.

  Once the Mac has been sleeping, I can no longer copy, scan or fax without having to restart the printer and the iMac. And it is intermittent. This does not happen everytime the iMac goes to sleep, but no doubt it happens once or twice a week.

  The printer is connected both wireless (so that I can print from my iPad in other parts of the House.) and directly to the iMac via USB.

  I have updated all the HP software related and have applied the last update of the HP firmware for the printer as well. I also ran through all the game instructions that were provided with the printer.

  Other troubleshooting tips would be greatly appreciated.

  Hi @RBurgett,

  Thanks for joining the Forums of HP Support for a solution to your fall issue offline printer.

  I understand you have a HP Color LaserJet Pro MFP M277dw connected to a wireless network for your iPad and connected with a USB to your iMac running Mac OS X 10.11.3 El Capitan, but the drops of the printer is offline after has been idle for a while and becomes also insensitive after mode "Eve". I would like to help with that.

  If you see the message on the printer offline on the iMac, it would be because the iMac think he's using the wireless printer, when it should be using the USB connection.

  You should be able to solve that by unplugging the USB cable. Once the USB cable is removed, reset the Mac printing system. If you don't know how to reset the Mac printing system, here is a document of support that can help - reset the printing system.

  After printing Mac system has been reset, you should be able to reconnect the USB cable and add it to printers and Scanners.

  As far as being not able to copy, scan or fax without having to restart the printer and the iMac that could be solved by resetting the printing system and making sure the USB printer is listed in the printers and Scanner. When the printer seem to be insensitive, the first step is to perform a reset of the power on the printer.

  

  Please let me know if that solves the problem, or if you need assistance.

• Qosmio F50 - can I use universal driver Nvidia?

  Hello

  I own computer laptop Qosmio F50-108 for awhile (GPU: N9700M GTS; driver ver.: 175,90).

  I was thinking of updating my driver graphic and discovered on nVidia drivers universal for laptop computers ([http://www.nvidia.com/object/geforce_notebook_winvista_179.28_beta.html]). Everyone made try them? I would like to know if there are questions and if the performance is better than with the current driver.

  Thank you

  Hello!

  Nvidia graphics drivers are not designed for the use of the laptop and are not certified by Toshiba.
  So to use the graphics drivers from Toshiba and you're always on the safe side.

  Some users here installed omegadrivers.net drivers but it s on your own risk. The drivers will be not supported by Toshiba.

  Good bye