LaserJet CM2320jn - no software scanning for iOS 10.8.1

Similar Questions

• LaserJet Pro M125nw MFP: scan for laptop

  I like my new HP Laserjet pro, but can't figure out how to scan to my laptop for e-mail, etc..  I know that I am probably not something located?  some would like to help!

  THX

  Welcome @BJ888,

• Software scanning for my Scanjet G3110 does not install

  Setup incorrectly states my new 660 s Dell equipped with 64-bit Windows 7 (installed at the factory) as an operating system 64 - bit XP and falls down (XP has never been installed on the computer).    I downloaded the latest version of the software recommended directly from the HP support site.  Of course, there is an installation problem.

  Is there a solution or another appropriate piece of the scanner software?

  Exit the:

  2014 01-15

  Name of the file:

  setup_full_G3110_14 - 5.exe [1/1, 117.05 M]

  Version

  14.5

  Compatibility:

  Microsoft Windows Vista
  Microsoft Windows 7 (32 bit)
  Microsoft Windows 7 (64-bit)
  Microsoft Windows Vista (64-bit)
  Microsoft Windows 8 (32-bit)
  Microsoft Windows 8 (64-bit)
  Microsoft Windows XP

  

  Hi abcandjrc, sorry to hear that you are having problems with getting your scanner installed. Remove all cables that you have connected the scanner to the computer. Click on the link for HP Scanjet full feature and driver software. If you still have questions, feel free to write again.

  Thank you.

• HP LaserJet 300 colorMFP M375n: menu missing Scan for the print multifunction device

  I have several colorMFP M375n of HP LaserJet 300 printers, I do not see the menu scan for a printer:

  

  With this printer, I can see the menu scan:

  

  What could be the problem with this printer?

  Hello

  Please, go to the Tools tab and specify exact firmware versions of the any of the different devices, which can be used to better understand any possible cause.

  Shlomi

• I tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan. Printer model: HP 3390 Laser jet

  tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan.
  Printer model: HP 3390 Laser jet

  I don't want the drivers.  I mean the software.  The drivers you get from the page server 2003 and the software from the page I referenced.   Otherwise, you need to contact HP, as they provide that software, not Microsoft.

  Steve

• LaserJet Pro M275 TopShot: Scanning question/icon

  I use Windows 8.1 (64-bit) and I have a printer HP LaserJet Pro M275 TopShot.  When I got my HP computer, I got a HP scanning icon which I could click and scan easily and also to scan multiple pages into a single document.  I recently had to get a new computer, which is a Dell, and now she just a scan icon and I can scan only 1 page... If I want the 2nd page, I have to save it in another document.  There is no option to scan another page that I used to have.  It only allows me to choose the file type, color mode, resolution and "save to...". ", nothing else.  The used scan automatically appears on the screen and I could crop for how I wanted to only it.  It does not now.   How can I get this back to the way it was?  Thank you!

  Hey @2CatsonEmerald,.

  I understand that you are having problems when your TopShot HP LaserJet Pro M275 MFP scanning to your computer Windows 8.1 that your HP scanning software is missing some crucial features that you had on your old computer. I would like to help you today with this problem of HP scanning software. Can I please you follow the steps below.

  Step 1: Remove the drivers:

  For the purposes of troubleshooting, it is essential that we have a clean slate to work with. I will, you remove all traces of your HP Laserjet in your computer Windows 8.1. If you use a wired USB between your computer Windows and Laserjet, please unplug this cable now.

  1. Open your Start screen by selecting the Windows icon at the bottom left of your computer screen, or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. On the start screen, type programs and features. Click on programs and features to run
  3. In the window programs and features will populate a list of the programs installed on your computer. Scroll through this list and find your HP Laserjet.
  4. When you see your HP Laserjet, click it and select Uninstall
  5. Please follow the prompts on the screen to complete the uninstallation. Once the uninstallation is completed successfully, please close the window programs and features and continue to the next step.

  Step 2: Remove temporary files:

  1. Open your Start screen by selecting the Windows icon at the bottom left of your computer screen, or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. On the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Install the device:

  1. Please click here to download the latest drivers for your HP Laserjet Printer
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Once installation is complete, please try the scan function to check if all your scan options are returned.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• HP LaserJet MFP M127fn Pro: Cannot save a HP LaserJet Pro M127fn MFP scan after update Mac Sierra

  I have a HP printer/scanner/fax multifunction, and after updating my Mac OS X Sierra, the "HP Scan" app does not allow me to save my scans more. Printing seems to work very well. Scanning occurs, but when it comes to saving what I scanned, 'save' button is grayed. I have read elsewhere on the forum than what has happened to other people using ordinary scanners (not multifunction units), but the software offered for regular scanners would not apply to my device.

  Hello

  It is incompatible with the Sierra of HP scanning.

  Download and use HP Easy Scan instead, it can be downloaded from the link below:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_6_1.pkg

  Kind regards

  Shlomi

• 8600 pro Plus scanning for paper A4 on Mac

  8600 pro Plus scanning for paper A4 on Mac

  I'm unable to scan A4 paper on my device of 8600 by using the HP scanning Application. I have validated that I use the latest software/firmware.

  I can print on A4 paper just can't sweep.  Any help would be appreciated.

  Hi TLC20,

  Thank you for your answer! I was wondering if you are able to copy with A4 paper.

  In the meantime, try the following:

  Load A4 paper on the ADF clash.

  On a Mac, click the Apple icon, click System Preferences, click Print & Scan, select your printer in the list, click the scanning tab, then click on open Scanner.

  Make sure that the document feeder is selected not to dish. Then change the format of A4 paper.

  Hope this helps you and have a great day!

• Who's in the driver download & complete software features for officejet pro8600, which is not in the database?

  Nobody knows what is in the driver full features & downloading the V28.8 software or for any version really another version of the case for Officejet pro8600... What's not in the download database?

  I'm running vista on an old computer and it doesn't have service Pack2 on it, which is necessary for the functionality of full download download.

  Just wondering if its worth the installation of service pack 2 to get the best features.

  See you soon

  Hello

  For Windows Vsita any service pack is supported and you are not required to install a service pack to install the full feature software, only Windows XP requires at least Service Pack 2...

  You can find the system requirements below:

  http://support.HP.com/us-en/document/c02858465

  The most important feature of the full feature software is Iris OCR reading that allows to scan to searchable PDF or editable text...

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• OR Max: No button "Scan for instruments.

  Before I start I will say that I used the NI GPIB-USB-HS devices for years with relatively few questions. I also visited several forums posted by people with a similar problem.  Basically, my problem is as the title suggests: when I open OR max and look for the GPIB-USB-HS device there is no button "scan for instruments" I'm used to seeing on the top bar.

  It's the first time I used nor max v. 16.0 and it is quite frustrating.  I believe that my ni488 driver is up to date and I have included all the details of the pilot in the screenshot below.  I can't understand what's not here, but my program LabView can not connect the GPIB instrument.

  A couple more things to note:

  -The same GPIB-USB-HS device that doesn't work here works on another computer with an earlier version of NI Max.

  -LabView program that I use to connect the GPIB instrument which does not work here works on another computer

  -When I browse for the GPIB-USB-HS in 'Device Manager' and select 'set to day pilot' windows tells me that the driver is up-to-date

  -I'm on windows 8
  

  Please help me.

  Hi JohnDoe89,

  This sounds like it would be very frustrating to meet - so let's see if we can reduce what could be the cause of the problem, we can determine the best way to solve it.

  You mentioned that things work correctly on another computer with software versions different-can you let us know which are running the versions of the software on this computer? It would be useful to compare to the list in the picture you posted.

  In the list you posted (I guess it's the software on the computer that does not work, rather than one that is), I noticed that you use 16.0 versions of many of your drivers. The readme for 488,2 drivers, it looks like the version 16.0 is backward compatible with LabVIEW 2013, rather than the 2012 I see on your list. If this computer is running an earlier version of the drivers/MAX, but the same version of LabVIEW, it's perhaps at least a part of what is causing the problem.

  If you can put the list of software for computer work, which will give us more information to work from.

• I think my IE has a virus but not of my scans for virus or malware checks come up with anything. Is there a way to check this?

  I think my IE has a virus but not of my scans for virus or malware checks come up with anything. My computer is running VERY slowly, lagging behind, or even on an occasional basis freezes and stops when I'm on the net. Computer function uses only the net works fine until a program I use try to use Windows Explorer. Is there a difference between Explorer Windows and Internet Exporer and is there a way to check this, other than the usual scans. I have McAfee and AVG, as well as malicious software running on a schedule and they are still running in the background, constantly analyzes the sites.

  I am at a total loss here. I use secure sites (https rather than just http) when the choice and do not use sites that McAfee or AVG is marked as dangerous. It worries me that I have a lot of things, such a Bank, online and not worry that someone could get information. I recently also maually run the two scan disk and Defrag but they can also be programmed to run on a schedule. The model is NOT saved. When I tried ot create a backup disk, when I first bought the model, something has gone wrong, and he refused to back up then reset would mean a great loss of material. If it's a virus, worm, etc., it is done gradually and I'm not sure that a restart of the plant would be useful it is in IE or Windows Explorer (if there is a difference).

  Yes, it is safe to uninstall McAfee.

  I recommend you to read this review: http://www.techsupportalert.com/best-free-anti-virus-software.htm
  You can also try CCleaner: http://www.filehippo.com/download_ccleaner
  "CCleaner is a freeware system, privacy and cleaning tool optimization. It removes unused files from your system - allowing Windows to run faster and free up valuable disk space. »
  
  
  Brian 

• Windows Fax and Scan for Windows Vista does not appear under all programs

  Windows Fax and Scan for Windows Vista does not appear on my computer under all programs - where he might or he is still in charge?

  If you have Vista Home Basic and Vista Home Premium, they do not come with Fax software included.

  You will need software 3rd party Fax:

  http://www.SnapFiles.com/reviews/Snappy_Fax_2000/snappyfax.html

  Snappy Fax 2000 allows you to send and receive faxes from your computer. You can use your scanner to scan documents and then sent a fax to any fax machine, or use the print command other applications to use the virtual fax printer, allowing you to send faxes directly from most Windows applications. In addition, the program also supports faxes sending via the internet, filtering of unwanted faxes and transfer incoming faxes to other fax or e-mail addresses. Additional features include import address book, faxes by email (with zip for images support), OCR, spell checking and much more.

  See you soon. Mick Murphy - Microsoft partner

• "Fax and scanning for Windows" for Win 7: where?

  Where can I find a download for "Fax and Scan for Windows. I used on another machine and he prefers on my new software to printers. I've looked everywhere, it seems, and nothing... In my research, I see the phrase "Fax and Scan for Windows" but never a download... I only need analysis and printing functions.

  Hello Mike,.

  Thanks for posting your query on the Microsoft Community. We are happy to help you.

  I wish to inform you that Windows Fax and Scan is built in utility, which ships with Windows 7. You can try going through the videos provided in the links provided below.

  Fax and scan Windows

  http://Windows.Microsoft.com/en-in/Windows7/products/features/Windows-fax-and-scan

  Scan a document or photo with Windows Fax and Scan

  http://Windows.Microsoft.com/en-us/Windows7/scan-a-document-or-photo-with-Windows-fax-and-scan

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-7

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Thank you.

• Applications for iOS does not work after update from cli 6.3.0

  After an update on August 3, when the Service of Build upgrade cli 6.3.0 my apps did not work for iOS, I have an iPhone 4 running iOS 7.1.2 and an iPad running iOS 9.3.3. After the build service update, no matter if I specify a lower version of cli, on the iPhone he asked a more recent software when I try to install from iTunes, but the iPhone and iTunes running on the latest version. On the iPad it installs, but the application icon does not appear on the iPad, so I can't access the application.

  Everyone knows a similar problem? I tried to look for documents but did not find any significant syntax change that could cause the problem. I even did a restore on my code (I had an old version of the compiled application and it worked, then I did a restore to this date on my code) and it does not work yet.

  ryanskihead not really, we test with 2 models, an iPad 2 running iOS 9.3.3 and an iPhone 4 iOS running 7.1.2 in both cases, the application does not, but the behavior is different:

  -On the iPad it installs successfully on iTunes, but the icon does not appear on the iPad

  -On the iPhone it says that it can not be installed because it requires a newer version of the iOS, but the iPhone is running the latest available version of iOS.

  If I specify a deployment target, say iOS 7 for example, it doesn't do anything on the iPhone. This and a similar thread I've seen on the target community deployment cli 6 ignorant, I would say that there is a bug with phonegap cli 6 + versions used on the Build Server.

  The problem now solved in time by doing a restore to phonegap cli 5.2.0, TI began works fine after that, so I don't know if there is a bug on higher versions of cli phonegap or there is a syntax change not yet published on config.xml