LaserJet M1136 MFP: Printer prints spaces

Similar Questions

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• HP LaserJet 1536dnf Mfp: HP Laserjet 1536dnf MFP - print problem printer

  My office has a printer HP LaserJet 1536dnf MFP printer and copy machine and it's only last month a year.  This morning the computer was printing and copy fine, then in the middle of a print job 21 page pages begins to show the 4 brands of blackshadow - like on the right side of the page (starting at the top and down to about 4 inches before printing the next black shadow).  Sometimes copying and printing.  I tried to reset the printer by unplugging the power for 10 minutes.  I tried to clean it with cleaning setting.  So far, nothing has worked.

  Greetings;

  If you could post a small picture of the question I might better be able to determine the cause.

  Are marks on the page dashes in the media?

  Brands repeat down the page in a spaced identical schema?

  The issue might have to do with the toner drum, but could be a piece of paper stuck on the fuser unit.

  Unlike the intervention of Anonymous_Fan this is not a model of injket and has no heads printing or alignment of the calibrations.

  I followed this thread and waiting for your response.

  Kind regards

  Jaclyn

• HP laserjet m1212nf mfp printer: HP laserjet m1212nf mfp printing issue

  Hello world

  I have a strange problem with my HP laserjet m1212nf mfp printer after updating to Windows 10 on PC1

  Updates are made, tried to reinstall ect.

  Now, when I tried to print it says required attantion

  But if something is that on PC1 and I decided to print from another pc and any operating system then Quebec on the prints of PC1.

  Any idea what could be the problem?

  I also ran problem solver and Diagnostics for windows 10 and HP (doctors ' something tool ') cant remember the name

  Help, please!

  Thanks for the help everyone, I managed to solve the problem.

  The soluction (Windows 10)

  Uninstalled the printer one again, then when you search for printers I chose that the printer was not on the list (although is has)

  Installed by using the IP address of the printer, after that, it will ask if you want to keep the driver or replace by the network (that) printer and success problem printing free driver

  In the future no update new printer

• where can I find the drivers for my hp laserjet cm2320 mfp printer

  I couldn't find a driver for hp color laserjet cm2320 mfp printer. My system is win 7.

  I couldn't find a driver for hp color laserjet cm2320 mfp printer. My system is win 7.

  -You know what you have for hardware: HP Color LaserJet CM2320 MFP

  So... what say you HP?

  Hardware support - including the drivers and other software that allow the device to interface with other software and hardware - is the manufacturer of the hardware device.

  This printer has been essentially abandoned in newer operating systems HP all in time, it seems...
  http://h30434.www3.HP.com/T5/printer-all-in-one-software/CM2320-MFP-has-been-abandoned/TD-p/218486

  Although it should 'work '...

  You can get the drivers and software, you can HP.  Select your specific printer if...

  • HP Color LaserJet CM2320fxi multifunction printer
  • HP Color LaserJet CM2320n MFP
  • HP Color LaserJet CM2320nf multifunction printer

• HP LaserJet M1212nf MFP: Printer continually initialization. Prints, but don't copy.

  Why my printer HP LaserJet M1212nf MFP (personal information) print but not copy and continually to initialize?

  Hello @PSFforever,

• Printer HP LazerJet M1136 MFP: Photocopier of error 8 HP LazerJet M1136 MFP printer - scanner.

  Product name: printer HP LazerJet M1136 MFP - scanner-copier

  Problem: Error 8.

  Description: There is no problem with printing but scanner and photocopier does not work. It shows E8 that is error 8.

  Thank you.

  I'm sorry, but the cost of repair and associated information must be obtained from the local HP support team or service center.

• LaserJet M1212nf MFP prints on labels

  My Laserjet M1212nf MFP will not be printed on the labels. Select 'labels' as the paper type, I get the large popup telling me to load support.

  I use Avery 5160 labels

  I can print the same labels on plain paper without problem.

  Hi Michel,.

  When the printer is set to the current settings and receives a request for the written press which is not currently installed and configured in the printer, it will prompt you can load the media is requested to print on.

  According to the description, it seems that the printer has not said the type of media that is loaded in the tray.   When he thinks that the driver you select labels, the printer itself, it commissioned from plain and requests that you load the labels.

  The following is a section of the User Guide. On Page 57 there are instructions to change the setting from the default document type.  If this setting is changed to 'Labels' and 'Labels' request from the driver, you should not get the prompt on the control panel again.

  

  Please try this and see if the prompt disappears.

• HP LaserJet M1132 MFP prints not a remote desktop

  Hello

  I have a MFP HP LaserJet M1132 (number of product CE847A) connected to a PC (MS Windows XP Home Edition + SP3) via the USB port. There is no problem with the printer. However, when using Remote Desktop connection (it is set to use the resources and local facilities, or in my case, printers and ports series) on the server (MS Windows Server 2008 R2), I can't even print a test of a remote office page.

  Error message: "print a test page failed. You want to display a tool to solve printing problems to get help? »

  But it does not anywhere as planned is access to the internet, and I've not had a MS Windows Server 2008 R2.
  The same error is for the HP LaserJet M1120n MFP.

  On my PC I installed another printer - old OKI ML321 (needle) connected to a PC using LPT cable and network printer Konica Minolta 1690MF (in another room). In two of these printers can easily print a test of a remote office page.

  Please help me.

  Thank you for your interest.
  The situation is a little different from the image. Windows Server 2008 R2 is available across the WAN. LAN is connected to the PC-1, 2 - PC and printer Konica Minolta. HP LaserJet M1120n MFP is connected through the USB port of the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC - 1 has access to Konica Minolta printer via the local network. PC - 2 also has access to Konica Minolta printer via the local network. PC - 2 is also available for PC-1 HP and OKI.

  It seems to me that I found the explanation for printing problems - some of 'my' printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:

  http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800D-2d9f-1f0c-225cabd6838e&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8DBB-9e95-11dc-3575d569acc2&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8D51-DCBB-7664cbc17a89&bCatID=1282

  I think I can close the topic.

  (translated from Polish into English using Google translator)

• HP Color Laserjet M476dw MFP: Of memory error on the HP Color Laserjet M476dw MFP printer

  Help please,

  I have a printer of HP Color laserjet M476dw MFP, its connected wireless to my computer mac laptop and it was working fine but suddenly today it appers error low memory which is strange, the file size is not more than 400 Ko, a simple solution to get red of this message pleassssssssssssssssss.

  I removed the printer and he added once again, the name of the printer seems to be good and show connected.

  Thank you.

  Shahid

  No, I did not change the toner, but I found the solution.

  This solution worked for me and my printer works now. You also try MAC OS.

  Remove the printer in printers and Scanners.
  Click on the button +, select the Protocol IP on top, type the address IPv4 of the printer, select Jet Direct below and then apply.

  Good luck

• Other driver for the LaserJet Pro MFP printer

  Can anyone suggest another driver for a Mac Mini (OS X 10.4.11) print on a LaserJet MFP M127fw PRO?

  Hi @suckerfish1,.

  I understand that you are looking for drivers for the 10.4 to use with the PRO LaserJet MFP M127fw. I can help you with this.

  Unfortunately 10.4, is not a supported operating system, there are no drivers available.

  Here are the supported Mac OS X operating systems: Mac OS X 10.6 Snow Leopard, OS X v10.7 Lion, v10.8 OS X Mountain Lion.

  HP LaserJet Pro MFP Color LaserJet MFP printers specifications M177fw Pro and M127fw.

  You must upgrade to 10.6, or get an another Laserjet supporting 10.4.

  Good day!
  Thank you.

• Device driver missing software for Laserjet M1120 MFP printer

  Hello

  I would like to tolocate and install software of the mising for my Laserjet M1120 MFP driver device.

  Any help would greatly be appreciaited.

  J

  MartianLizard wrote:

  Hello

  I would like to tolocate and install software of the mising for my Laserjet M1120 MFP driver device.

  Any help would greatly be appreciaited.

  J

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3447598

• LaserJet M1136 MFP: Find the MAC or the IP address of the printer

  Hi, I tried to find the IP address or MAC address of my printer of office for days without result. The printer is connected via USB to a computer on the network and others connect to it like a computer on the network.

  I need to add the printer to a Mac laptop, and I need the IP address to it. I tried the config/print test pages but they do not have the information, I looked in the Ports tab in the printer properties, but port poster not the IP address, on the contrary, it didn't USB001

  I also used 'arp - a' command in CMD to get a list of attached devices, I have the list of IP and MAC addresses, but I don't know what is the printer. So I tried to watch the MAC address and could not find anyone.

  Can you help me?

  Hello

  What the below URL :-).

  https://support.Apple.com/en-in/HT3049

• M477fnw LaserJet Pro MFP: Print not offline

  The printer is set up wireless.

  Installed correctly according to the test page.  Can't pring offline... Word documents, articles, etc.  Print a copy of my email, newsletter articles, nothing online.  Technical support HP and a nephew, working for a COMPUTER company ran Diagnostics remotely and both agree with the test page, that there is nothing wrong and I should be able to print off line.  I tried to reinstall a few times and with options of different configuration, but always using the supplied with the printer setup disk.  The installation disc is updated according to the option ' check for updates ' during installation.

  Technology HP said it's probably because the IP addresses of the printer and the pc are different.  Printer laser HP 3 year has a similar IP address as the new printer and it works fine on my wireless network.

  Before buying this LaserJet, I could not find a review for this product so no known problems to watch out for.

  Does anyone have a suggestion (s)?   Thank you.

  Just discovered this LaserJet Pro M4777fnw MFP does not print the Word documents, PDF format only.  Will Support HP drop a line of detail so the next time, they will know the answer.

  The problem is solved!

• HP Laserjet m1212nf mfp printer: cannot set RINGS TO ANSWER

  Hello

  I have the printer HP Laserjet 1212nf.

  It works very well in the past.

  The fax was not connected during the last year.

  Now, I reconnected and I can't send or receive faxes.

  I also see that I can't set the number of rings to answer - is what I see on the fax screen: 0 (0-0)

  Can it be fixed?

  Thanks to you all

  Hi @AmirTA,

  Have you tried the reset I sent you private message?

  If you can't change the settings of the printer, I would suggest to update the firmware of the printer: LJM1130_M1210_FW_Upgrade_Security_signed - 20150405.exe

  It may be a hardware problem, if the options in the menu, you cannot change them.

  You must use a cable 2 son.

  Voicemail can interfere with faxes that crosses. One suggestion would be to get setup distinctive ring on the line or to disable voicemail.

  You can set the fax to the manual, but you must press the printer button each time to receive the fax.

  Keep me posted. Thank you.