Repair disk errors

Similar Questions

• HP Pavilion 500 series: repair disk error

  Hello.
  I have a problem when I turned on my PC and it said "prepairing auto repair' followed"diagnostic PC"and finally"repair disk error, it may take more than an hour"
  It had been like this for 10 hours and I know something is wrong. Any help would be appreciated.
  Thank you.

  According to the published specifications, your PC comes with a standard SATA 3 1/2 ".

  After you remove the disk, check the capacity on the label, because there are different sizes available options when you buy the PC.

  So, no matter what another 3 1/2 "this capacity SATA drive will do.

  Good luck

• HP Pavilion 15 laptop n011TX: Repair Disk Errors.This could take over an hour to complete.

  Hello!
  I have a laptop HP Pavilion 15 n011TX. I use windows 10. I use the laptop for more than two years now. Recently, he began to get 100% usage of the drive and the laptop started to freeze and trolling. So, I decided to fix it myself by watching videos and forums. I stopped and disabled some services (BITS, Superftech, Windows Search, Prefetch). It worked fine for awhile, but the trunk started to slow down a lot.

  I tried a few other corrections on the internet but nothing worked! Now the computer does not even start. He just asks me to enter my username and password. And then, after 10 minutes of loading, it starts to "fix disk errors. "It could take more than an hour to finish".

  I let do that for more than six hours, and then I restarted my computer (after frustrated!) and the same thing started again. Please tell me how to solve this problem!

  Thanks in advance!

  It is a fact that no process is perfect.

  Hard drives badly.

  This is why they are included in the free replacement warranty if the failure occurs within the warranty period.

• Windows 8 lenovo bookno net dvd rom won't start windows, still trying to repair disk errors

  , I like the oem license is stored in the bios, how can reinstall windows with disc or usb

  Hi all the success possible,

  After finding that windows 8 is wired in the Bios and that the media is now the manufacturer I dug in the Lenovo Web site.

  The computer shop I took it to could not diagnose the cause of the other that a defective hard drive old 2 years priming scrap the laptop and waive the fees of consultants £25.00.

  Fortunately, I refused, released and after that audit on the lenovo Web site found that the option of repair on the lenovo is wired with a hidden in the drive partition.

  So with a simple turn on and outside while pressing the small 15-minute Windows 8.1 reset button has been restored and is now currently update itself to windows 10.

• Repair disk - HP Envy23 errors

  When I turn on my computer there is a message 'Auto repair Preparation' and then it turns to "diagnose your PC" then "repair disk errors, it can take more than an hour to fill," I had the computer on keep nearly 3 hours and above just messages reappear with appearing to do repairs. What can I do? Any suggestions?

  Thank you

  Hello longfram,

  Thank you for responding to my message asking for additional information. I looked in your question, and it seems that if you have a bootable Windows 8 repair disc, you can run it and fix your Windows 8. Otherwise, if you turn off your computer and once it's off you hold down F11 key and press the button while continuing to hold down the key F11 you will bring up the system recovery that will repair your computer at factory.

  NOTE: BE WARNED THAT THIS WILL DESTROY EVERYTHING, INCLUDING YOUR PERSONAL FILES!

  It would seem that your operating system it corrupt. If you have the knowledge and the ability to back up your files by putting the hard drive, I would recommend that you do otherwise if your personal files are large enough you can bring your computer to a local computer repair shop and save your files for you.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Trying to empty the trash.  After clicking on empty the trash.  An error comes up saying that this cannot be done due to the error 50.  Tried to check and repair disk permissions.  This finished.  Then tried to empty the trash again and got the same error

  I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.

  Tried to check and repair disk permissions. This finished.

  Then tried to empty the trash again and got the same error 50 yet.

  I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.

  I can't go in safe mode or in disk utility.

  Any suggestions on what to try?

  Thank you

  What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode

• Repair disk Vista not working does not and cannot correct the disk error

  Hello. I have a disc error and my vista repair disc does not work and I do not know why.

  I tried "repair disk" in the start menu F12 and it will not work.

  Does anyone know an alternative solution for fixing windows disk repair?

  Anyone know why they would stop work?

  I too, have a mysterious GLOW RED on my screen and do not know if this is related to repair disk does not?

  It is originally the screen system 'black '.  My main screen simply vanishes in the dark and I have to restart the computer and go through everything new; checked the Direct X (up to date) and running hard drive Diagnostics, but the diagnosis breaks down due to the error of hard disk (disk repair-related?)  What is the 'RED' light on my screen?

  Thank you!!! for any input or advice!

  
  

  Hi Nansye,

  Until solve us the problem we need more information about the problem you are experiencing.

  • What is the exact error message you receive on repair disk?
  • Since when are you facing this problem?
  • You did changes to the computer before this problem started?
  • Are you able to boot to the desktop?
  • You have a Windows Vista installation DVD?

  In the monitor that you receive the red glow due to various reasons like failure to display drivers, hardware problem or if there is any what interference of electronic gadgets.

  I suggest you update to download display drivers the latest drivers on computer manufacturers site and check if it helps to solve the problem of the red light on the screen.

  You can access the link below and follow the steps to update the drivers to display on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Make sure that you do not have other electronic items kept around the screen and try to keep few away from the computer.

  If the update of the pilots is not enough, you can contact the computer manufacturer to check if there are problems with the material of the monitor and if it needs to be replaced.

  You can also run the memory diagnostic tool on your computer and check if it helps. Access the link below and follow the steps to run the tool from WinRE Windows Memory Diagnostic.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem 

  Postbacks with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Pro repairs hard disk errors

  My hard drive had errors and corrupt sectors.  I ran the tool to fix my hard drive and now need to repair the operating system.  I am running windows 7 pro legal copy of course as always.  What is the best way to repair windows 7 without having to redo my computer everything and start again.  I know that there are some missing files due to hard disk errors because strange things are happening now and some things do not work properly.

  E-mail address is removed from the privacy *.

  Trevor Walsh

  Try to repair the Installation of Windows 7

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. click on the link to repair list system in the System Recovery Options recovery tools.

  More information and a how to guide:
  http://pcsupport.about.com/od/toolsofthetrade/SS/Windows-7-startup-repair.htm

  If this does not solve it:

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD. If you are prompted, press any key to start Windows from the installation disc.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. Select command prompt and try the following commands (one command might work, or you may need to use several commands according to the exact problem):
   
  Bootrec /fixMBR
  Bootrec /fixBoot
  Bootrec /rebuildBCD

  Note: there is a space before the /.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Receive the error message"restarts to repair the disk error."

  Original title: error

  'restart to fix the disk error' after I restarted my PC, this message always appears
  How to solve this problem?

  Hello

  Run the Startup Repair tool and see if it helps.

  a: Press Windows + O logo to open the search box.

  b: Type Advanced startup options, press ENTER.

  c: then click on restart now under Advanced Startup.

  d: now click on troubleshoot.

  e: and then click Advanced options , and then the auto repair.

  Hope this information helps.

• My iPod nano 2nd generation gets disk errors after installing iTunes?

  I use my iPod nano 2nd generation for... Wow little almost 10 years now and of course is not as sensitive, a little laggy sometimes, battery life isn't as good but still never had real problems with it that can be repaired by a reset. Well not until now and I have not really money to spend to get a new, in particular the fact that practically it still works fine on his own, just that I can not add or remove pieces of her more.

  The problem

  It seems that the computer has trouble reading the device. Whenever I plug my iPod nano 2nd generation USB in my laptop (Windows 10), which has some sort of interaction with it freezes. For the moment I plug in, programs such as Winamp, iTunes, File Explorer (if I click my computer-> try to right click on the drive, that says all F: drive instead of the usual name recognized as "My iPod."), the Device Manager when I try to turn Apple iPod USB Driver and the small icon in the system tray when you try to eject the drop-down list no longer appears, all these programs themselves just freeze and unresponsive until I unplug the device. In Event Viewer, the moment where I plug it, it gets spammed by looping errors to:

  Error: The device, \Device\Harddisk1\DR21, has a bad block.

  ATTENTION: An error was detected on device \Device\Harddisk1\DR21 during a paging operation.

  So, basically, it seems that the computer is blocked just not try to read and recognize the device, which means that I can't really do anything with it. The iPod itself seems to work fine, I can hear songs, recharge the battery and other things, earlier I can't add or remove pieces of her.

  Stuff leading up to it

  A year or two before, I used to manage the ipod via itunes (a relatively old version of time too I guess since I almost never update) until I formatted my laptop some time ago and never bored computer reinstall itunes. Since then, I really didn't need to change anything to my iPod and just use Winamp (my default music player) to the add/remove songs when I needed to. Today, I decided to install iTunes because there are some things that winamp cannot do as add embedded lyrics and also winamp blurs the sorted list of the song. Since then, after you have installed the new iTunes, start freezing and program I get the problems described above. There might be a chance that iTunes was not the real culprit and the disc was already beginning to get corrupted or something somehow, but I can't think of anything that's happened before this problem started.

  I tried many things

  • Uninstalled iTunes and all the other stuff related to the installation as pie, Apple Mobile Device Support... .etc
  • Reinstall the device driver USB Apple iPod. When I turn it off (Plug in iPod-> iPod poster 'do not disconnect'-->--> Device Manager driver right click-> disable-> Device Manager freezes up-> unplug ipod-> Device Manager-> thaws plug ipod in) ipod becomes simply the State of charge. Steps to reinstall is the same (need to plug and unplug).
  • Reset iPod in now the Center button + menu button.
  • Will then resetting operation rewind + Centre button iPod diagnostic mode. It is not a test disc hard because I guess nano doesn't have a disc hard just flash ram. Anyway, when I select SDRAM QScan he only says: "SDRAM OK." NAND_SPEC gives "NandLBA = 1982464". Flash gives Checksum "Checksum is 0x26AF".
  • Wanted to try as described here to check for disk errors, but cannot because the computer cannot correctly recognize and explore freezes if I right click. I tried using 'chkdsk f:' in the command prompt, but that seems to hang as well.
  • Switches mode disc reset ipod then now Center + play button. Then connect the laptop... etc, same problem.

  It's a pretty old device, so it seems that support because it is very rare. I didn't install iTunes could screw up the device that it is intended to support and do anything as permanent as this one.

  You must exclude a faulty USB, cable anchorage, try another, or using your power with another Apple device cable, to confirm that it works correctly.

  Otherwise, your troubleshooting seems complete.  If that's what you've done for disc Mode

  How to put your iPod in disc - Apple Support mode

  and connection to your computer causes this issue General 'freeze' with multiple processes, the iPod has possibly a hardware problem.  Flash storage eventually.  Or it can be a problem on the logic board of the iPod.

  I suggest try to reformat the iPod using Windows, as if it were a USB flash drive.  But you can only do if the system hangs when you connect iPod.

  NOTE: If you find a way to reformat iPod using Windows, use FAT32 as the disc format.  If there is an option to do a quick format, do a full format instead.  Once the process is complete, the iPod is totally blank.  You do restore using iTunes (if you are prompted or not), to the embedded iPod software.

• MacBook Air wouldn't startup after starting get disk error

  I was getting full boot disk error on my Macbook Air 2012 model a few times, and then it stopped starting (folder flashing with question mark began to appear). I followed the instructions on this site If flashing question mark appears when you start your Mac - Apple Support

  but failed to copy data from the drive on an external hard disk. I could see my boot (MacintoshHD) on the disc utilities drive, but could the volume seems to be not mounted.  The size of the disk is 128 GB and only 12 MB seems to be free.

  1 has started the macbook in recovery mode. In disk utility, run check disk and repair utilities disk for the startup disk (MacintoshHD). No problems in the generated logs. The volume is not mounted and is dimmed.

  2 selected MacintoshHD and tried to unlock it. The system tried for a while, and the password window disappeared after some time with the MacintoshHD via disk utility.  When I restart the machine again in recovery, disk MacintoshHD reappears in the same situation.

  3. I was able to start the macbook after installing a new version of OS X in an external hard drive. During the installation of OS X, I couldn't copy the data from the volume MacintoshHD (possibly the drive is locked).

  4. I could not start my macbook in safe mode.

  My query is-

  1. I had not backed up my data by any means. What are my current options to copy my data MacintoshHD?

  2. because the MacintoshHD is locked and attempts to unlock it had no disk utility, it will help if I start my macbook target disk mode, connect to another mac via a thunderbolt cable and try to copy data?

  3. What are my options now to restore my macbook? Clear my boot drive (MacintoshHD) and reinstall OS X?

  Thank you

  Dip

  The next trick could unlock your boot drive.

  Boot into recovery mode, open Terminal.app and type

  Mount - uw /.

  close Terminal.app and reboot.

• SMART hard disk error (301)

  I WANT m6-1120sw my friend. When I turn it on it shows SMART drive hard error, said diagnosis: "SMART Check: NOT AVAILABLE, short DST: caution. His old HDD, I replaced it with a new one, but nothing has changed. -What would be a problem with the SATA controller on the motherboard or is it something different?

  Hello
  
  Smart disk error indicates failure of hard drive. You still get any ID failure?
  
  Since you have already replaced it & not showing is not available, the probability is for the connection by defective SATA cable or SATA controllers or motherboard itself.
  What of all the other disk hard test - wide?
  
  Try HD Tune Pro software currently running on the system.
  
  You may have to contact HP for repair.
  
  Thank you

• 'Built by HARD disk error' in Portege R200

  Hello

  My Portege R200 shows "built-in HARD disk error" start-up. " In the BIOS screen, it says "no drive" on the HARD drive.

  What should I do? I checked the connection and the drive is connected to the fine. I heard no noise when starting.
  Is this HARD drive problem? or maybe motherboard? Help!

  Lee

  The HARD disk rotates upward?

  Try resetting the BIOS to default settings.

  Other than that, I think that it's not just you can do except send the laptop to a repair center.

• Disk error SMART Quick (303)

  Hello

  My Laptop(G6-1118tx) now shows an error at startup as a 301 SMART hard disk error. When I approached my after-sales service, what they told me after the test drive that he was "a SMART Quick (303) error hard drive» Can someone tell me what is this error? Why this error occurred? and what is the solution?

  Thank you

  Praja...

  Hi Praja,

  For all purposes, it is extremely unlikely that the HARD disk can be repaired - Smart warnings you receive are usually a good indication that there is a physical problem with the drive.  Although there are software that can stop these errors from appearing, is not really cure the problem but just hide - IE if warnings are generated as a result of bad blocks on the HARD disk, these blocks can be excluded from the test and if the reader can look like it has passed the test, but in reality these bad blocks are always present simply ignored.

  Once a HARD drive begins to run out, it will only get worse - how long it takes can vary significantly, but if you value your data, that I always recommend to replace the HARD drive.

  If your laptop is under warranty, HP should replace the HARD drive.

  Kind regards

  DP - K

• disk error hard laptop computer hp Pavilion dv6

  I get three disk errors hard when I do drive hard main self-test: hard drive 1 303 fast and complete 1 305 hard drive and hard drive 1 smart 301. Also, I can't open windows normally, it will just go straight to the repair start and even that does not work! I don't have the chance to back up my files and I don't want to lose them. Help, please!
  Thank you

  The hard drive has failed and needs to be replaced. Once you have replaced the HARD drive you will need to perform the HP system recovery so that Windows and hardware drivers are reinstalled correctly.