LaserJet m1319f windows 7 32 bit

Similar Questions

• print LaserJet 1000 windows 7 32 bit driver

  Looking for a laserjet print driver 1000 windows 7 32 bit.

  There are no Windows 7 drivers for this printer.

  You can download an alternative driver for the printer to print. (Shane_R) has a great post on how to download.

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers-e-g-Windows-8/How-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

• HP laserjet 1022 windows 7 (64-bit) will not install printer what can I do?

  1 HP LaserJet 1022 printer

  2. Windows 7 64 bit

  3. No Error Message

  4. the only changes to the system are updated security Windows Updater. This is a new computer and old was under XP.

  I tried to delete the printer, newer software (lj1020-HB-pnp-WIN64-en) download and try to install it, add the printer through windows and even the printer will not work. The cd version will work until you are asked to connect the printer and then nothing happens. I even tried to run overnight to see if it find and install, but nothing happened. This printer is a workhorse for me and I want to keep running, any suggestions on getting this printer is recognized and run again?

  See if the 1022 is listed under other devices in Device Manager.
  Under 'Other devices' right-click on HP 1022
  Select "update driver software... »
  Choose "Browse my computer for driver software".
  Choose "Let Me pick from a list of drivers for devices on my computer.
  Select 'Printers' > next
  Under the "factory" > HP
  Under "Printers" > HP Laserjet 1020
  Select "Yes" to the warning popup

• HP 3015 Laserjer: Laserjet 3015 Windows 10 (64-bit)

  I just bought a computer with Windows 10 (64-bit).  I have a HP Laserjet 3015 printer that works fine on my old computer XP OS.  I downloaded the HP Universal driver but the computer still will not 'talk' to the printer.  Any ideas on how I can make the printer work with this windows OS 10?

  Thank you

  RodS12

  Let's try to present once more.  Do not download anything.  Remove only the prnter and you have downloaded all the drivers.  Now turn off the computer and turn the printer off.  Start the computer again and when the computer has finished booting, the printer and when you're ready, plug the usb cable from the printer into the original port.  We should have found new hardware and it should load it all for you. Let the computer search for the drivers and see what happens.

• HP Laserjet 1000 Windows 7 64-bit?

  I tried everything I could locate using the internet, search engines to try to Windows 7 64 - bit print on a HP Laserjet 1000, which is connected to an XP machine in my work group home. Of course, I can print fine to an XP machine in the same workgroup. But not from Windows 7 64 bit.

  I was able to install drivers XP Laserjet 1000 and print from virtual XP Mode. Works very well.

  But I'm unable to see or to print to the printer shared outside the virtual XP Mode in Windows 7.

  What missing am me?

  ZZ.

  See http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=3463669&prodTypeId=18972&objectID=c01856597

  The Laserjet 1000 is category 6 - not supported under Windows 7.

• Driver for hp color laserjet cp2025 windows 7 32-bit

  I just bought a refurbished Dell Optiplex 755 32-bit with Windows 7.   I have a hp color laserjet CP2025.  The icon appears in the devices & printers as indeterminate, unknown and yet no model. appears correctly as CP2025.  It has a USB connection that loads a driver automatically.  I can't print a page of test etc.  After I powered the system in place initially I was able to print a test page but after 200 or so updates, I can't do anything with the printer.

  Hi, I don't think that my printer USB of FYI is supported in the latest version of Windows 7.  TNX., Ray

• LaserJet 1022n Windows 7 64 - bit Installation problem

  Running Windows 7 Home 64 bit; Driver downloaded from HP site; The connection using USB. During installation, it does not recognize the device is connected and powered. Cannot proceed with the installation, the only option is to cancel and exit.

  Help, please

  Hi SlowAndSteady,

  First, you must download and install the drivers found here (maybe already what you're trying to install):

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=439323#n164

  If you still encounter a problem with your computer recognizes not the printer, try the steps listed here troubleshooting:

  http://support.HP.com/us-en/document/c02124639

• HP laserjet 1102w windows 7 64 bit - off-grid each time the pc is restarted (wireless connection)

  Implements a thin using the chip to install, but when the pc is restarted the pc does not recognize the printer and the only solution seems to be to reinstall the software. I tried all the solutions proposed on the pages of HP support without success. Software, firmware and antivirus are all updated.

  Help.

  Hi, how did you set up IP address - static or dynamic?

• LaserJet M1319f scan to PDF is no longer an option in Windows 7 64 bit

  I have 3 HP LaserJet M1319f multifunction printers 2 are now attached too new 64 bit Windows 7 computers and 1 XP Pro SP3. The option scan to PDF is no longer available on Windows 7 machines. I can scan to .jpg or .gif. I have the latest drivers installed because I had to load the HP software that the disk does not work with Windows 7. What I owe the new disc orders at HP to get additional software? Is it still an option? Any help would be welcome.

  Best regards, John

  Hello

  He joined Setup scan to application in Win 7 64 bit. Let me know if you have any questions.

• HP Laserjet M1319F MFP is not able to scan under Windows 7 (64-bit at home)

  I have a Windows 7 Home Premium 64 - bit HP Pavilion connected to the HP Laserjet M1319F MFP. All the functions of the printer worked so far.

  The scan function has stopped working. Here are the steps and errors that I see:
  1. I load the sheet from which I scanned in the printer and the printer displays
  2. I start Windows Fax and Scan dialog box and press the button new scanning
  3. New Scan, dialog and I press the Scan button
  4. the printer begins to feed the sheet and displays
  5. immediately after the message that the printer displays the message
  6. a message with the dialog box titled error, and after I press OK another dialog box with Windows Fax and Scan title pop-up.
  I did the following steps to try to fix the scan:
  1 uninstalled the printer and it added. Scan still does not work.
  2. I downloaded the latest driver and firmware on HP site updates and installed on the PC and on the printer firmware. I had success on the driver and firmware of the facilities. Scan still does not work.
  3. I ran PC-Doctor hardware diagnostics on the printing device and got a status of success. The Test page printed successfully.
  4. I am able to print documents, but will not scan. I tried both ways - single and multiple - sheets. Scan still does not work.
  Any suggestion would be appreciated.

  Hi ApolloWZ,

  Thanks for your quick response.

  In the meantime, I found the solution to my problem, so I thought I'd share it here for others.

  I found the answer here:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/can-t-scan-from-M1536dnf-after-reformatting-computers/TD-p/3914820

  I will cut & paste the answer below, in which case the link above doesn't work at some point:

  (1) on the computer target under the normal user account, press Start, in the search box type services.msc. Right click on the program that appears and select "Run as Administrator". Enter your user password or click on next to go to the UAC popup, if necessary.
  (2) locate the service called "Windows Image Acquisition (WIA)" and double-click it.
  3) click the connection tab, and then change this service to log on under a Local System account. Click here to allow the service to interact with desktop. And then click OK.
  (4) reboot (or if you really don't want to restart & know what you're doing, you can just stop & restart the WIA service twice)

  See you soon,.

  Gary.

• Question of LaserJet M1319f MFP Installation on Windows 7

  Dear HP team and community members to support,

  I am currently trying to install HP LaserJet M1319f MFP connected via USB on Lenovo Q190 machine /Intel Core i3 processor / freshly installed running Windows 7 Enterprise 64-bit with Bulgarian language pack, all updates, Microsoft Forefront Protection/i also tried to disable the real-time protection /, UAC disabled, account administrator, IE 11, .NET Framework 4.5.1.

  The priter work properly with Windows XP.

  I downloaded the package of driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=bg&dlc=en&sw_lang=&product=3547...

  After reached installation process 'Copy of the files on the hard disk' stage Setup returns error software install printer no longer works.

  I tried to run with Windows XP SP3 compatibility mode or administrator privileges, but the same error occurs.

  I tried Microsoft Fix It software to install/uninstall drivers too, but without success either.

  I cleaned up the temporary files and Max about 10 to 15 times.

  Windows update is not help with drivers too.

  I tried to extract the Installer files and manually add the printer and received the error that the installation was not successful and it says below the file is not found / if I remember it well.

  After that I tried the HP Print and Scan Doctor software, but it shows that there is no driver installed and redirect me to the driver download page.

  I tried the Assistant driver software also, but it returns that this model is not supported.

  I tried to change the Startup Windows "Selective startup" with "Load Startup items" unchecked and all non-microsoft disabled services, but without success.

  Under safe mode that will not accomplish the install because the print spooler service does not, which is running normally otherwise.

  The "ntprint.inf" file is present in the folder 'Windows\inf', HKLM\SYSTEM\CurrentControlSet\Control\Print\Enviroments\Windows NT x 86 registry has only subkeys drivers and print processors and the HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors registry has only Local Port, Microsoft Shared Fax Monitor, monitor the Standard TCP/IP Port, USB and WSD port subkeys.

  The Windows\System32\spool\PRINTERS and Windows\System32\spool\drivers\W32X86 folders are empty.

  I ran sfc/scannow in cmd with administrator privileges, but there was no violation of integrity.

  I tried to disable the IE component, but no luck either.

  So now I'm out of ideas how to connect that * bleep * thing... I hope someone can help me with this problem.

  "Hewlett PackardHP LaserJet M1319f MFP" currently devices without driver installed in Device Manager /Hardware ID USBPRINT\Hewlett-PackardHP_La28A1 and Hewlett-PackardHP_La28A1/ and Scanning HP /hardware ID USB\VID_03F0 & PID_5817 & REV_0100 & MI_00 and USB\VID_03F0 & PID_5817 & MI_00.

  I forgot to mention that I tried all kinds of variations with these solutions with or without connected printer.

  Thank you very much in advance for all type of guidelines.

  Best regards

  Ivan

  P.S.: at least, I think that I managed to collect all related solutions in this topic...

  Dear Gemini02,

  After a few days of trying different types of solutions, I finally managed to install the printer as a network device.

  So basically, I also had a problem (error 0 x 002) with the installation of the printer as a network printer. Restart the Printer Spooler service has not worked and erase cache files did not work either.

  So I installed x 64 driver on the host machine and then installed the network printer. For those who do not know how to install x 64 drivers:

  -Download the drivers from the official HP support page

  -Check out the *.exe file in a folder (if you don't have additional archiving program replace *.exe with cover and unzip it with the build Manager). Navigate to the folder 'x 64' and extract the file "LJM1319L.cab" to separate the folder.

  -Go to 'Printers and faxes' ("devices and printers" in Windows 7 ")

  -Then right click on the shared printer already and click on 'Properties' ("printer properties" Windows 7 ")

  -Click the 'sharing' tab and click on "additional drivers".

  -Select 'x 64' or only ' IA64"in the case that your hardware architecture is demanding and click 'Apply'.

  If you have already installed the drivers, the rest is not relevant, but if you do not:

  -Open the extracted folder and select the file "HP1319fp.ini" (if it returns select error 'HPM1319.ini')

  -When he asked the second time pilot open 'x 64-> LJM1319L' and select the *.dll file

  -on the third request for drivers go to 'x 64 English-> PrntDriver' and select 'ZSD1319P'.

  I couldn't try to connect and install by USB (the office that I am taking care, as if it were new post more), but after the successful installation of the drivers that the printer connected locally should also work perfectly.

  So I hope I was help someone like me about this and still do not understand why I should have done everything for installation driver simple?

  Best regards

  Ivan

• HP LaserJet 5000 support in Windows 7 64 bit

  I recently bought a Dell laptop which has MS Windows 7 64-bit OS and I have an old Dell Desktop 4400 w/Windows XP I have a HP Laserjet 5000 printer is connected to the LPT1 Port.  I have the shared printer, and I can connect with my other laptop that has the MS Vista operating system.  I can't get my laptop which has Windows 7 connect and I have tried everything I can think. I connected to my laptop with Windows 7 and downloaded the latest driver on the HP Web Site.  The drivers for the LJ5000 are called universal drivers.  The drivers are installed on my W7 system and then I'll start/devices and printers and "Add a printer" option.  I select the 'look' in the network option and Windows looking for the shared Prnter and considers it.  I select the printer and it starts looking for the driver.  I think he's looking on the computer where the printer is connect anyway, it cannot find the driver.  I get a dialog box that says it cannot find and gives me the ability to navigate.  I then go to the universal driver I downloaded for HP5000 and I'm going to the folder that contains the files ".inf".  The program tells me it can't find the driver for HP5000.  What I am doing wrong?  Windows 7 supports the HP Laserjet 5000 printer.  I hope of course because I can afford to buy a new 11 "x 17" printer. "  There, can someone help me?  Thank you.

  Try the following: on the Windows 7 machine go devices and printers folder, add a printer, a local printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, then click Windows Update, and then select the appropriate driver.

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• LaserJet 5 M and Windows 7 64 bit - duplex problem

  I have a Laserjet 5 M Postscript with a duplex printing unit in my home network.

  Windows 7 64-bit, the duplex printing option is not displayed.

  1. I reinstalled the driver - cool from MS
  2. I manually changed the ' properties/device settings' to indicate the duplex unit is "installed".   I have administrator privileges.
  3. I rebooted the machine.

  However, under preferences - or for actual printing, under available - possibility of double-sided printing is not displayed.

  Any help will be appreciated.

  My two machines from Vista (32 & 64 bit), with no problems, print double-sided on it.

  Alright George. I have discussed this with my colleuges and we agree that this thread would be better suited in the business forum. Since it is a printer and we focus only on consumption patterns. We would do a disgrace to not send you over there.

  Here is a link to Board commercial laserjet.

  Business - LaserJet HP Support Forum

  Im going to have a moderator hover over this thread to the business section for the best chance to get a solution.

  Take care!
  Sean

• HP LaserJet M1217 Wireless Installation on HPG60 Windows 7 64-bit issues with no error message.

  I tried to install a new HP LaserJet M1217 with a wireless connection to my PC (HP G60 with operating system Windows 7 64-bit).  I spent many hours trying to a simple task.  I have not in all instructions and options slowly and kept my concentration without success.  I have the method wireless attempt, the method of USB, the method of attached CD-Rom and downloaded from the HP website.  Always without success.

  I followed the instructions of troubleshooting and always without success.

  I currently have a HP LaserJet P1102's wireless installed.  It works perfectly.  I have a wireless HP7280 all-in-one printer installed prior to my purchase of a new M1217.  I uninstalled the software of HP7280 before my attempt to install the new M1217.

  I don't have any type of error except the computer would stop downloading for all options except the web download procedure.  The web left me hanging with no next steps after being downloaded.

  I'm exahusted after several hours of attempted an installation.  I can get the M1217 print when it is attached to my PC via the USB port.  How can I get to print and scan wireless?

  Thanks for your suggestion.  I had already downloaded the PDF file and followed the instructions without success.

  I received a diagnosis of the HP media card and I was able to complete the installation.