HP laserjet 1022 windows 7 (64-bit) will not install printer what can I do?

Similar Questions

• I just bought a Canon 7 d Mk2 but raw files will not open in Cs5 and Adobe Camera Raw 8.7 downloads will not install. What can I do?

  I just bought a Canon 7 d Mk2 but raw files will not open in Cs5 and Adobe Camera Raw 8.7 downloads will not install. What can I do?

  CS5 cannot go higher than 6.7. If your device requires a more recent version, download the free Adobe dng converter. You convert your RAW to DNG, which can then be processed 6.7 in camera raw.

• The 3rd part of a windows update will not install. What can I do?

  Hi there Microsoft overlords. I was wondering if you could help me. I've seen a similar thread on the final update not install it, but I don't know enough about variables in order to know if it is a minor or major problem and how to fix it. Any help woul be appreciated.

  I am running Windows Vista on a Toshiba Sataleite Pro 2010. I ran two FULL virus scans last night, with Avast free protection and another with Windows Essentials I think. Windows has found a number of serious threats that I hit the function apply on. Then I did a scan with Avast.

  Then after I finished the second virus with Avast scan, the laptop began something strange. The screen went black shortly after it (not immediately think"I") and he began to make a safe-mode-esque all programs, including the documents and my downloads of loading. He said it was a bookkit or a rootkit or something similar. I don't quite remember.

  In any case, I leave this list of command of rootkit series go on a little I don't know initially, he said "I want to check all the files of rootkit or bookkit for security", yet once I do not what that.

  I let happen to 7% completed which took between 30 minutes and an hour to reach. I then press ESC to cancel the process which he allowed me to do.

  After that, the pc began to restart dozens of times trying to reinstall a 3rd update of windows (which remains at zero percent).

  If it's any help I had a windows update for last night. I had to have one, but I postponed it for a few hours.

  Also, I think that the laptop can (MAY I'm not sure) ran out of power last night to stop.

  I think I let him run out of power because he was stupid before you stop, even if I can't be sure.

  Thanks for any help, if you need more information do not hesitate to answer.

  p.s. I tried to go to SafeMode to start again, but now it is useful. Safe mode programs load then IMMEDIATELY (until I can get to s a start menu or anything like that), she goes in this cycle to shutdown/reboot/update.

  Thank you. Helllp me :-)

  My apologies. I don't know much on the PC at all and I couldn't remember what I had done or read yesterday evening.

  Fortunately, my laptop is now fixed. I had nothing too precious that I had not already supported so my brother reinstalled windows on it again and it is fine now.

  Thanks for the help. Soon :)

• Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

  Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Windows 7 64 bit does not install

  the 64 GB will not install

  What is the error message when you try to install?

  Installation may stop if the system cannot copy files. Here are some possible causes and solutions for this problem:

  Your Windows installation disc is scratched, smudged, or dirty. Clean the disc with a soft cloth, insert it in the CD or DVD drive, and then start the Windows installation again. If your installation disc is damaged, you may need to replace it. For more information, go to how to replace lost, broken, or missing Microsoft software or hardware on the Microsoft Web site.

  Your CD-ROM or DVD drive is not working properly or the disk might be vibrating too much for the laser correctly read data. For more information about this problem, see your hardware documentation or contact the manufacturer of the CD or DVD drive.

  If your computer has multiple CD or DVD drives, your computer may attempt to locate files on the wrong drive. If your computer has a feature to disable CD or DVD drives that are not used, turn off readers that you don't use. Otherwise, try to insert the disc in a different drive, and then restart the installation.

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Wait about 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

• Windows Vista updates which will not install

  My OS Vista Home Premium 32 - bit for my HP Pavilion a6460t computer will not install the updates listed below.  I scanned for virus conficker, as well as for other viruses, most recently with the Microsoft OneCare security scan (beta), and my computer is not infected according to these analyses.  I have also tried installing these updates directly from the websites of download from Microsoft without success ("the following updates were not installed").  Auto update is on.

  Update security for Windows Vista (KB960225)
  Update security for Windows Vista (KB958690)
  Update for Windows Vista (KB959772)
  Update definition for Windows Defender - KB915597 (definition 1.55.1119.0)
  Update for Windows Mail Junk e-mail filter [March 2009] (KB905866)

  Thank you

  Ron Alexander

  After several calls to the technical support of HP (which is also the warranty service for my Vista installed factory), the problem of update is finally resolved by reinstalling the operating system Vista.  Thanks again for all your help and suggestions.

  Ron Alexander

• Windows Vista Ultimate SP2 will not install update KB2378111 or install downloaded programs and returned with error code 80070570

  Hello... my computer will not install update KB2378111 with a code error 80070570.  In addition, I can not install all programs downloaded from the internet, specifically my anti-virus software.  I'm running without any software antivirus at this time.  I ran the most recent Microsoft malicious software removal tool and it showed that there is no problem.

  I'm running without any antivirus at this time software

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows service pack 2 will not install on my computer

  I have windows vista and service pack 2 will not install on my computer what should I do

  Start here:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366 TaurArian [MVP] 2005-2010 - Update Services

• I try to install my Canon imageclass d320 Painter on my new computer windows 8. It will not be printed

  It seems that the printer is configured in the system ok, but it will not be printed.  Documents in the queue in the print spooler, but won't print.

  Hi Eric,.

  It seems that you need help to solve the problem of the printer's performance. Please respond to the suite, which will help us to help you in the right direction.

  1. What's wired or wireless printer?
  2. Do you have an error message?

  You can check the link followiing, steps, designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems.

  https://Cat.Microsoft.com/ticket.aspx?ID=1510862&threadintid=1510862&forumid=5&ThreadId=c09d8743-40F7-40AA-AFF5-d1ab3d6cec0b

  You can download the latest driver from the following link.

  Canon imageclass d320.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_d320#DriversAndSoftware

  Hope this helps

• My installer of windows is damaged and will not install office 2007, I tried the fixes, but still get error 2

  My installer of windows 7 is corrupted and will not install office 2007, I tried the suggested fixes but still error 2 in windows install when I hit start

  How can I get this problem... Thank you

  Well, I don't know what patches you have tried.

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  or

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Also:

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• Update for Windows XP (KB2509553) security will not install starts but will not end

  Update for Windows XP (KB2509553) security is not installed

  Hi RogerGreene,

  1. Did you the latest changes on the computer?
  2. You are able to install some other updates on the computer?
  3. You have security software installed on the computer?
  4. You receive an error message when you try to install the update?

  Method 1

  I suggest that you manually download and install the update, check if it installs properly.

  Update security for Windows XP (KB2509553)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16350

  Method 2

  If the previous step fails then I would suggest that reset you the Windows Update components by default and then try to install the update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Linksys WUSB54GC driver problem Windows 7 64 bit - will not allow

  I have a Linksys WUSB54GC 3 Wireless Network Adapter version.  I downloaded the latest driver on the Linksys support page that says that it is fully compatible with Windows 7 64 bit.  The adapter will not allow.  After 3 grueling cat takes support sessions with Linksys, they could not understand it and threw the problem back to my Tower say it must be a problem with my Windows 7 64 bit.  I searched for Windows and Linksys support forums and some people have had luck, and others have not.  The driver has been installed manually several times as well as the removal of material, resettlement and loading the driver again and again.  I am trying to connect to my router Linksys WRT54G which has the latest firmware and has another computer wireless connected to it without any problems.  If anyone can help?

  Hello

  Have you tried the device on another computer just to be sure, does it really work?
  Have you tried another device on this computer?

  Are you logged on as ADMINISTRATOR when you do the work? Right click on the driver
  and RUN as ADMINISTRATOR?

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  The device here is the WiFi device:

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 64 bit will not be closed down - restart instead.

  My new Dell XPS 17 computer laptop under Windows 7 64-bit restarts when I stopped him. The only way it stops is by pressing the power for 10 seconds. Otherwise no obvious problems at all. Any ideas please?

  Hello

  Began to encounter the same problem a couple of weeks.

  The time to take a look at this over. I tried all the recommended options, change poweraftershutdown regedit, disable WOL, check power management settings, deleted roxio software. Active DELL updates of BIOS, installed the BIOS published September this year was last updated and this has solved my problem.

• Get the error 0x000003eb, Windows Vista Home Premium 32 bit will not install the printer on the network or USB drivers

  I tried some of the ideas in the forums and Vista still won't let me load the drivers. It recognizes the printer and I'll install the drivers, no luck getting error 0x000003eb. At IT, share the printer UAC is on, tried with offshore, does the same thing.

  Try to install Xerox Phaser 6250DP Laser Color. If anyone has an answer, you wish.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista 64 bit does not install last version of iTunes

  I just updated my iPhone, the recent phone must have the latest version of iTunes installed, I currently have 12.3 but I'm unable to download the latest version, I have Windows Vista 64-bit on my desktop, can anyone help?

  I don't think that Vista will support the latest version of iTunes, which is necessary for the latest version of iOS. I will check something quick and get back to you. What iPhone do you have? What happens when you try to download the latest version?