LaserJet M506: the 99.39.64 printer error

Similar Questions

• HP PSC 1610: The HP PSC 1610 printer error

  The printer displays: remove and check right cartridge.

  I have done so repeatedly, so turn, but not luck.

  Ideas of cause / problem please?

  Hello @biddlegirl,

  Welcome to the forums of HP.

  I understand that your printer is rejecting the cartridge on the right.

  I would like to help.

  Try to go through the following documents.

  Error message "Problem with print cartridge" appears on the control screen

  "Remove and check color/black pen" Message appears on the control panel for HP PSC 1600

• How can I export my book in Adobe PDF format without it abandoned with a message "printing error"?

  I use Adobe InDesign CC 2015 on Windows 7 and a book with several chapters, each chapter being a separate document. Several attempts to export the book to Adobe PDF failed with the following statement:

  "Printing error: Adobe Print Engine failed at the end of your data due to an unknown problem."

  When I run the command 'Package book for print', it shows that there are some fonts and missing images. However, as far as I know, I replaced all the missing fonts and I'm unable to see all missing fonts or images on the computer screen. Person documents in the book export to Adobe PDF with no problems, but the book does not print as a whole, affecting the table of contents and the page numbering (e.g. Roman in the front-end vs Hindu-Arabic in the rest of the book). I'm frustrated because InDesign doesn't tell me what the problem is. I'd appreciate any help in this regard.

  No, I wasn't trying to PRINT to PDF. I tried to export the book in PDF format in following file > export... and then click on PDF for output. That did not work. However, I just realized that I can export the book by clicking on the small arrow in the upper right corner of the menu that shows all the documents in my book (I don't know how it's called). From there on, I chose "export book to PDF...". "and voila! It worked.

• HP LaserJet M252n: The printer error

  There is an error displayed on the screen of the printer of 59.CO, I rebooted the printer and the error code is someone can point me in the direction of a resolution please?

  Hello @techrc, greetings!

  Thank you access the Forums from HP Support for extra support! I see that you encounter the error of printer on your printer Laserjet M252. I will do my best to help you with this problem.

  Is the error message "Error 59" or "error 49"?

  I suggest you to update the firmware of the printer to solve this problem. Please follow the steps mentioned below:

  • Make sure that the HP printer driver is installed on your computer.
  • Click on http://ftp.hp.com/pub/softlib/software13/FW_CPE_Consumer/Orion_SB/M252_Series_FW_Update-20160331.exe to download and run the firmware update utility.
  • Click the update button.
  • Select the printer that you want to update from the list.
  • Click the Refresh button on the dialog window. Follow the on-screen instructions to continue with the upgrade.
  • Do NOT power cycle the printer or the PC during this process or the printer may become unstable or unusable without further attention of HP. The firmware update can take several minutes to complete. Please be patient.
  • To check the update, you can print a configuration page. The configuration page of the current firmware revision in the product information section.

  I'll watch for your reply. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• How to fix "Printer error state" when I try to print to the HP Laserjet 3030?

  Have not been able to find information on why my HP LaserJet 3030 printer cannot be used with the new computer from Samsung in Windows 8.  I chose driver for printer, but receive error messages - "Printer error state" or "Cannot find the output device" - when I try to print.  What can I do to fix this?

  Unplug the printer for PC > uninstall all printer drivers > restart PC > down load & install the correct driver from the HP Web site > reconnect and turn on printer:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=378058&TaskID=135&cc=us&lang=en&prodSeriesId=378056&prodTypeId=18972

• IP address for LaserJet 4100N changed which resulted in "Impossible to connect to the printer" error

  I had the printer (HP Laserjet 4100N) and the computer (desktop Mac OS X Version 10.6.8) unplugged for two months.  When I enabled both, I wasn't able to print more.  The two are connected by Ethernet (via an Airport Extreme 802.11n) cable

  After printing the Configuration page, I noticed that the address of the printer HP JetSend is 10.0.1.8 now.  It used to be 10.0.1.5

  When I type http://10.0.1.8/hp/jetdirect, it is confirmed that the printer has a new address.  When I go to preferences on the computer, followed by Print & Fax, I see the originating IP address always.  When I go to options & offer, the originating IP address is present in the name and location boxes.  I thought that I could just change the IP address both of these boxes to the new IP address.  It does not work.  (BTW and URL never lpd queue name change 10.0.1.5 to 10.0.1.8).

  Then I thought that things would be solved by changing the new IP address to the former in the menu that appears when I look at http://10.0.1.8/hp/jetdirect. Which doesn't work anymore.

  What Miss me?

  Thank you

  Patrick

  It is resolved...  I went to the Apple discussion Forum and saw this:

  Regal909 , February 28, 2010 20:35
  in response to Chuck Stewart

  OK, this one is solved. In Print & FAX preferences panel, click on the button "+" to add a printer. Define the contextual menu Protocol to "HP Jetdirect - taken". In the 'Address' field, enter the IP address of the HP 4100.

  Leave the class 'tail' blank unless you use a print server. I'm not...

  Set the 'Name' field to what you want as a name for this printer.
  Set the field 'Place' to something that reminds you of where this printer is physically located.

  Currently, Mac has probably already found the printer by its IP address, select the driver appropriate for you, and so all you need to do is click the Add button.

  Good impression...

• HP Laserjet M1217 MFP printer - error memory power

  I just install my new printer HP LaserJet M1217. I get the message "Power supply memory error" on the screen of the printer > installed the SW using the HP Smart Install program.  Win 7 is the operating system.

  Thank you very much for your help!

  Hi kongtoy,

  There is a clip on the chip on the cartridge's protective plastic. Remove the orange plastic, and he's going to quit giving you the power of memory error. Refer to figure 6

  Power supply memory error "Message is displayed on the control panel

  

• P laserjet P1606dn: fake windows 10 printer error

  I have a HP Laserjet P1606DN installed and works. I installed windows 10 April 2, and every time I print something
  I get the following error notification
  "PRINTING ON HP LASERJET - PRINTER ERROR COULD NOT PRINT (REPORT NAME). Pages printing in any case without any problem.

  Can someone tell me how to get rid of this error?
  I have an HP office jet pro 8600 - another printer and it prints correctly without error.

  Thanks in advance.

  I solved the problem.

  I have LAN in my house. My HP P1606dn is a NETWORK ETHERNET printer.  I went into the PORTS on the printer and CHANGED my PORT for the TCP/IP connection.

  THIS WORKS.

• DeskJet 4535 & 1606dn laserjet: impossible to print some HP printable worksheets & impossible to remove the existing connected HP printer

  Hello.

  I just bought a new printer HP Deskjet 4535 at home and he registered so far as I can use HP pritables for my children. However I later discovered that another printer HP (Laserjet 1606dn) was alos registered to work under the same account. When I'm going to connect HP and list printable HP the default printer is the one labour (1606dn). Some pads cannot be printed for a reason any.  When I view the printable he says "it's available to print directly from your printer. Click on Add to My printable to print at the request of your printer display. ", but when I click on"Add to my platelets"it gives the error message"we couldn't add this printable. This printable is not supported on your printer. ».  Please help me solve this problem!

  Thanks in advance.

  Hi @cakmak,

  Thanks for joining the Forums of HP Support for a solution to your problem of HP pads.

  I understand that you have purchased a HP DeskJet 4535 use with HP all-in-one printer printable, but your work computer, HP Laserjet 1606dn, becomes in the way to be able to add a printable HP for your HP DeskJet 4535. I would like to help with that.

  When you go to HP connected , you should be able to remove the HP Laserjet 1606dn clicking the devices tab. The printer should be listed with its HP ePrint e-mail address and button settings below it. If you click on the settings button, there should be a picture of the Laserjet Printer and a "delete printer" option below that you can click to remove.

  Here is a document of support when troubleshooting printable HP - troubleshooting problems with HP ePrint printable.

  Please let me know if that solves the problem, or if you need assistance.

• HP Laserjet III: The printer does not print

  I have a HP Laserjet III printer that I used with my HP laptop. The computer has Vista Ultimate. The printer has a parallel port only. A parallel to USB cable port was placed on the printer that the computer has no parallel port. Several years ago I installed the printer on this computer and it was working fine until yesterday when I accidentally deleted the printer when I was looking for cancel a print job. I tried the printer function added in the Control Panel, but the test is given a printing error message or disappears without printing. I tried plug-and-play, but the printer is not seen and is not installed. Printer drivers are suspected to be part of windows, but I can't find printer drivers, there is a HP Laserjet III printer installed to LPT1, but this computer has no LPT so not sure how it was installed. Of course, that does not print the printer is not connected to the computer. How can I install this printer to make it work on this computer?

  When you deleted the printer you may have removed the entries between the usb adapter to the computer and the printer.  If you have a disk provided with the adapter which can help you get it going again.  You're dealing with two objects here and it is possible we won't communicate again.  Try another card kind of force the computer to see the new map and help you get the printer working again.  There probably many registry enteries that have been established when you plugged the adapter between the two devices together.  Some of these entries went when you deleted the printer.  One more thing, you can try is to do a restore of the computer to a date before you deleted the printer.  Who will restore the registry at this time and even the printer.  I would establish a restore point before going back just in case you lose something more important with dating back.

• Color LaserJet 1600: print error for Color LaserJet 1600 not solved with troubleshooting or relocation attempt

  I get an 'impression' error when trying to print any document. Have used the convenience store, who said that a print job has been blocked and that the authorized troubleshooter. Second attempt, same result. Attempt to uninstall printer but had received "implemented encountered abnormal program execution. Implementation will stop. "The next window: your printer may have been incorrectly installed, try to reinstall with the recommended settings. Got it but no change. Try "add/repair" printer with no solution. INFO: Color LaserJet 1600, PN # CB373A, Windows 7 Home Premium

  Hi Brenda6,

  When you reinstall the printer helps reinstall you by plugging the USB of the computer? Or are you downloading from the HP site? I recommend that you disconnect the printer from your computer by unplugging the USB or disconnect the connection without wire and then go to the HP support for HP Color LaserJet 1600 printer. Find your printer driver and reinstall.

  I hope this helps!

• Canon MG5450 cannot be set as the default printer, error 0 x 00000709, please help!

  Hello MS community.

  I'm lost, I tried several things to solve this problem, but could not succeed.
  My system is:
  Windows 7 Home Premium SP1, stable and works well with a score of 5.9
  My printer has been installed and deleted 3 times already and I tried both set up as a network printer or a USB connected. At the moment I installed it as a USB, but this will not let me install the default printer.
  First the printer is accessible and print successfully from Word, ACDSee and some other applications but is not recognized by Adobe such as Photoshop & Acrobat products and does not Excel print. I know that this error has been discussed in several other threads, but yet I could not find a solution that worked.
  I tried to repair the registry as following the instructions here about something else:

  (a) click Start.
  (b) type regedit in start search and press enter.
  (c) access the site mentioned below.

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
  
  (d) in the right column, you will find key device, change the value of your printer name.
  (e) it is for example in the format: "HP LaserJet 4250 PCL6, winspool, Ne03:

  (f) right click on the value and click Rename, replace with the name of your printer.

  When I try to change the key it doesn't let me, even if I ran regedit as an administrator. It is said:

  Cannot change the device: error writing to the new content value. I wanted to put: series of Canon MG5450 printer, winspool, draw:

  even if in the example, she said winspool, Ne03. I thought I could leave I had in default.

  i also see another key which is:

  Load REG_SZ C:\Users\-(my user name here)-\LOCALS~1\Temp\mshikra.bat

  This also I do not know what because if I go to this folder this .bat file is not present.

  I also tried this tool:

  http://support.Microsoft.com/mats/printing_problems/

  and when he said will analyze it: series of Canon MG5400 printer is not the default printer, and then I clicked on fix it and id not said, not successful.

  Now I don't know what else to do.

  The only true left to try perhaps would be to reset all the settings of the printer (the printer connects to the home network with the wifi password) may disable the wifi wireless option, if possible. Switch it off and remove all the entries of the printer and try again to install it, but then perhaps on the administrator account.

  ideas? suggestions?

  Hello

  If I understand correctly you are facing problems with the configuration of the default printer. Do not worry, I'm here to help you with this question.

  I would like to know how you're trying to it set the default printer, so that we can help you better.

  Let us try the following methods and check if it works for you.

  Method 1:

  Run the printer troubleshooter.

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Try the steps in the Microsoft Help article and check if it works for you.

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3:

  Turn on the Windows Firewall temporarily turned off and then try to print.

  Enable or disable the Windows Firewall:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  WARNING: Disable Antivirus\Firewall temporarily, then check the issue. Sometimes they may be in conflict. Please make sure that you enable the antivirus software\firewall after the test to keep your computer protected.

  For more information, see the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  Please answer if the steps not help, so that we can better help you.

• MFP HP LaserJet Pro 400 M425dn will not print the text to format 72 points or more

  My workplace has recently bought a M425dn of MFP HP LaserJet Pro 400 all-in-one printer. It works perfectly except for the fact that it will not print text that is 72 points or larger in size. I tried many fonts that are installed with Windows, and all them print correctly to the point size 71.5 or smaller; Another thing simply does not appear in prints. Content which is of size to 72 points or more * fact * affect the flow of the content printed on the page, however. It's like the 72 points or larger text takes up space, but it is completely invisible on the printed page.

  I tested using Microsoft Word 2002 on three separate computers, of which two have installed Windows 7 and Windows Vista installed. The problem is the same on all three computers. The printer is connected via an ethernet cable to our wired network. I have installed the printer software included, and I don't think that there are updates for it that have not been installed up to this point.

  Any thoughts on how to solve this problem?

  Hello, I just made an account to solve this problem for you guys because it has been a puzzle to me also...

  I apologize before the huge hand for the terrible grammar and punctuation that I'm in a hurry

  Now it does not work for everyone but I fixed it on my machine with the following

  now before you print it... .use (ctrl + p) in your text editor to open the print window, click (properties), and then navigate to the tab (Advanced) now, I have a section called the characteristics of the printer in this category there is an option to 'send truetype as bitmap' activate this and see if it can help someone of you, for me, with this PERMIT I can print any font size my processor will allow me to type

  in my machine's plug

  Reference Dell d6420

  Win7

  Msoft word 2007

  printer itself is

  HP laserjet 200 color m276

  printer driver is

  HP LaserJet 200 color MFP M276 PCL 6

  I understand that this printer and driver is not identical to yours in itself, but the nature of these drivers makes it highly likely that this solution works for most of you

  If this can help, someone else did post more because I'll probly do not sign in to this site I created this account just for this post and I hope to solve this annoying problem issue for many of you... .no necessary congratulations

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• My HP Officejet 4300 Series printer is not printing-"printer error says"no connection to the computer.

  Original title: My HP Officejet 4300 Series printer not print

  The mistake of the printer says "no connection to the computer. The computer error says: "the printer is offline. All necessary cables are connected. What should I do?

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try this method and check the status of the issue.

  Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also refer to:

  Resources for the resolution of the printer in Windows XP problems.

  http://support.Microsoft.com/kb/308028