LaserJet P1006: Our LaserJet P1006 returns to 'paused' immediately when you try to print.

Similar Questions

• color laserjet MFP M177: error message when you try to print

  Hello

  I have a HP Color laserjet MFP M177.  I can't print I get an error message on my computer screen. No messeage shows up on the printer.  I have recently upgraded to windows 10 (I do not know what version) If this could have something to do with it?

  Help, please

  Thank you

  Hi @Daisy001,

  Welcome to the Forums of HP Support! I see by your post that you can't print, since the upgrade to Windows 10. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  If you have not completely uninstall and reinstall the driver, I would say to start it there first. Here is the link to the latest drivers: Color_LJPro_MFP_M177_full - solution_15188.exe

  If the problem persists, you can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  Please let me know the results and if there is anything else I can help you. Thank you.

• When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

  Original title: HP Laserjet 1300 Windows XP, SP3 error installation

  When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

  CANNOT INSTALL THIS HARDWARE

  There was a problem installing this hardware

  HP Laserjet 1300 PCL 6

  An error occurred during the installation of the device.

  The specified Module could not be found.

  I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

  Hello

  You are able to install other programs?

   

  Method 1: See the following article:

   

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

   

  Method 2: view the following steps and see if that helps.

  (a) disconnect the printer

  (b) uninstall the software and drivers on the computer

  (c) plug the printer back

  (d) allow the Hardware Wizard search for drivers

  e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

• How to fix "Printer error state" when I try to print to the HP Laserjet 3030?

  Have not been able to find information on why my HP LaserJet 3030 printer cannot be used with the new computer from Samsung in Windows 8.  I chose driver for printer, but receive error messages - "Printer error state" or "Cannot find the output device" - when I try to print.  What can I do to fix this?

  Unplug the printer for PC > uninstall all printer drivers > restart PC > down load & install the correct driver from the HP Web site > reconnect and turn on printer:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=378058&TaskID=135&cc=us&lang=en&prodSeriesId=378056&prodTypeId=18972

• I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

  I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

  This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

  I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

  Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

• Why my IPAD shows printer is paused when I try to print via AirPrint?

  IPAD Air running 9.3.1 reports that my Air Print printer is paused when I try to print to it.  I am able to print to the printer from my PC very well

  .

  Try the simple fix first. Turn the printer off, reset your iPad and restart the printer. To reset the iPad press and hold the Home button and the sleep/wake button permanently until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

• LaserJet P2035n goes into infinite loop when you print from Windows 7 64 bit

  I installed the latest drivers from this site for Win7 64 bt and whenever I try to print on my laserJet P2035n on the network, it goes into a loop and sends the same print job again and again until I cacel work on my PC.

  Anyone know why this is happening and how reolve it?

  TIA,

  Joe

  According to HP tech who helped shed some light on this for me

  for Windows 7 32 bit

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1845552&prodTypeId=18972&prodSeriesId=1845551&swLang=8&TaskID=135&swEnvOID=228

  for Windows 7 64-bit

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1845552&prodTypeId=18972&prodSeriesId=1845551&swLang=8&TaskID=135&swEnvOID=2100

  Right-click on the file, choose Properties, and select the appropriate compatibility mode that corresponds to that specific folder that you downloaded.

  HP technology has solved as fast it takes to install a printer successfully. I went and done it for the rest of the printer to the breast of our society and all the world works perfectly.

• SQL (body of function from PL/SQL returning the SQL) query when you use to_char

  We are trying to build a page of Type SQL Query report (body of function from PL/SQL returning SQL query).
  our request is simple, to extract the month of the column recording_date.
  
  declare
  l_query varchar2 (1000);
  Start
  l_query: = 'select to_char (recording_date, 'MM') of re_productive;
  Return l_query;
  end;
  
  but we would like the following for this query problem
  
  Function returning SQL query: query cannot be parsed in the generator. If you believe that your query is syntactically correct, check the box of generic columns below the source of the region without analysis.
  (ORA-06550: line 4, column 42: PLS-00103: encountered the symbol "MY" what awaits one of the following values:.) (* @ % & = - +; <>/ at is mod remains not rem <>or! = or ~ = > = < = <>and or as between | multiset Member SUBMULTISET_ the symbol ".") was inserted before 'MY' to continue.)
  
  Notes:
  1 - the request is correct and it has been tested under sqlplus and toad.
  2. we tried option use generic name (analysis of query runtime only) column, but we get the same problem.
  
  
  any quick help please.

  Hello

  You have not escaped your quote in the string. Try this...

  DECLARE
  l_query VARCHAR2(32767);
  
  BEGIN
  
  l_query:= 'select to_char(recording_date,''MM'') from re_productive';
  
  RETURN l_query;
  
  END;
  

  See you soon

  Ben

• iPad 2 returns to the home screen when you try to type in the search bar

  Hello

  My iPad 2 is a return to the home page when I try and type in the search bar of safari.

  Have released the story, the iPad, but it made no difference and ideas how to fix?

  Obviously a problem on the end of Apple but try settings > Safari > Safari Suggestions > offshore, for now.

• When I try to play a song on mediaplayer it pause and when you press play there is no sound

  original title: when I try to play a song mediaplayer it go to pause, but it works but no soundit didn't tell paused when I press play?

  I want to play music, but when I press on play stopand breaks but the cursor for the song Carry on, but he didn't have his establishment?
  It's on media player

  Hi Barney,

  1. who is the operating system installed on the computer?

  2. what version of Windows Media Player?

  3 is the issue limited to any specific track/song?

  4 did you do any change in software on the computer before this problem?

  Try running the troubleshooting Windows Media Player tool and check if the problem persists.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

• Download Manager "Server returned an Error" when you try to reinstall SQL Server 2008 R2 180-day free trial

  I'm trying to install the trial version of SQL Server 2008 R2 on my computer for the second time within the period of 180 days, because last time it has installed without Analysis Services, I needed. The first time it installed fine.

  I do not get a specific error message - once the Download Manager comes to extract the SQLFULL_x86_ENU.exe file, a box opens and says "the server returned an error. Would you like to try again? "and continues to appear if I try again and block the Download Manager.

  I have Windows 7 and a 32-bit computer. Is the question the fact that it is the second time that I install, or something else? I would have thought that the error would have been more accurate, if that were the case. If so, what can I do to get the software installed on my machine for the rest of the trial period?

  Thanks please help!

  Hello RobPeterscheck,

  If this is your 2nd time to install, did you uninstall the original SQL version until you tried to reinstall?

  You can temporarily disable the download manager in Internet Explorer and then activate once you have installed the download you want. This will help to highlight if Download Manager is the problem.
  Log on with an account that has privileges Administrativer.
  Open Internet Explorer.

  Click on 'Tools' on 'Internet Options'.
  Go to the Security tab.
  Go to custom level.
  Go to the downloads Section.
  Find the file downloads tab and disable the option button.
  Click OK.

  Restart to save the changes.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn

• Audio jack play and pause/stop when you press the various buttons

  Hi all

  I do a simple radio interface and I have 6 buttons which I want to have that specific preset song playing of the button located in the library screening and stop/pause the current song when you press any preset button.

  I tried to use the attachSound, with associated identifiers but don't know if it's the right way to go. He plays songs, but does not stop their...

  {mc_FM1preset1.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset1
  FM1value = 1
  
  PlayFM1_1 = new Sound (this);
  PlayFM1_1.attachSound (FM1preset1_song);
  PlayFM1_1.start (0, 1);
  
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_2.pause;
  
  }
  }

  
  }
  {mc_FM1preset2.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset2
  FM1value = 2
  
  PlayFM1_2 = new Sound (this);
  PlayFM1_2.attachSound (FM1preset2_song);
  PlayFM1_2.start (0, 1);
  
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_1.unload;
  
  }
  }

  then I tried just to put each piece in its own clip and using this code, but it still doesn't stop/pause the song.

  Stop();

  {mc_preset1.onRelease = Function ()}
  mc_song1. Play();
  mc_song2. Stop();
  }

  
  {mc_preset2.onRelease = Function ()}
  mc_song2. Play();
  mc_song1. Stop (1);
  }

  Does anyone have any suggestions? Any help would be great! Thank you!!!

  Basically, I just need to know how to do the supported mc or button to STOP / to PAUSE the song that plays

  Thank you!!!

  -PAt

  the sound class has no property of break.  It has a stop() method, you must use:

  {mc_FM1preset1.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset1
  FM1value = 1
         
  PlayFM1_1 = new Sound (this);

  
  PlayFM1_1.attachSound (FM1preset1_song);
  PlayFM1_1.start (0, 1);
         
  PlayFM1_6.stop ();
  PlayFM1_5.stop ();  etc.
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_2.pause;
         
  }
  }

  }
  {mc_FM1preset2.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset2
  FM1value = 2
         
  PlayFM1_2 = new Sound (this);
  PlayFM1_2.attachSound (FM1preset2_song);
  PlayFM1_2.start (0, 1);
         
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_1.unload;
         
  }
  }

• Pause video when you click it?

  Hi, I have a flash video which is set to auto play when page loads. We have just implemented system thickbox/lightbox on it now so when you click on the video she is growing in this new framework. Problem, when it made the video/audio is still playing while the video in the thickbox plays too. This listening ineffective attack. Does anyone know a code that would trigger the video to pause when you click anywhere on the video screen?

  Now the videos tested at this link- http://edlevinjewelry.com/indexTEST.html

  I don't currently have the video related to lightbox, just a link above the video to expand.

  With FLVPlayback, this is my current code (he currently coded and implemented for the automatic video game starts at 52 seconds)...

  Import fl.video.MetadataEvent;
  Import fl.video.VideoProgressEvent;

  Fl.video import. *;

  my_FLVPlybk.addEventListener (VideoEvent.COMPLETE, rewind);
  function rewind(eventObject:VideoEvent):void {}
  my_FLVPlybk.seek (52);
  my_FLVPlybk.play ();

  }

  var fp:FLVPlayback = my_FLVPlybk;
  fp.addEventListener (VideoProgressEvent.PROGRESS, videoProgressHandler, false, 0, true);
  fp.addEventListener (MetadataEvent.METADATA_RECEIVED, metaDataHandler, false, 0, true);
  fp.autoPlay = false;

  var startSeekTime:Number = 52;
  var videoDuration:Number;
  var videoSeeked:Boolean = false;

  function metaDataHandler(event:MetadataEvent):void {}
  If (event.info.duration! = null) {}
  videoDuration = event.info.duration;
  }
  }

  function videoProgressHandler(event:VideoProgressEvent):void {}
  var fp:FLVPlayback = event.currentTarget as FLVPlayback;
  var bytesLoaded:Number = event.bytesLoaded;
  var bytesTotal:Number = event.bytesTotal;
  If (! isNaN (videoDuration)) {}

  If ((bytesLoaded/bytesTotal) > = ((startSeekTime + 4) / videoDuration) & &! videoSeeked) {}

  videoSeeked = true;
  FP. Seek (startSeekTime);

  FP. Play();
  }
  }
  }

  Sorry, I thought that the flvplayback component extended the class movieclip.

  use:

  var toggle: Boolean = false;

  stage.addEventListener (MouseEvent.CLICK, videoF);

  function videoF(e:MouseEvent) {}

  {if (!) Toggle)}

  my_FLVPlybk.pause ();

  } else {}

  my_FLVPlybk.play ();

  }

  Toggle =! switch;

  }

• I get "PAGE not FOUND" when you try to download the drivers for my Laserjet 1320N

  I am trying to download a driver for the HP Laserjet 1320N printer

  The link to my driver download page is here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 18...

  But when I go here and click DOWNLOAD all I get the following error

  > > > > > > > > > > > > >

  This web page is not found.

  No web page was found for the web address:ftp://ftp.hp.com/pub/softlib/software10/COL9747/lj-27308-6/lj1320pcl6win2kxp2003vista.exe

  < < < < < < < < < < < <

  I tried it throughout the day. My internet connection is fine.

  Any help greatly appreciate

  Thank you

  esuerpgood

  SPOT ON!

  

• How to return to normal mode when you use vim shortcuts in the code/style editor?

  I try to use vim shortcuts keyboard for code/style editor in Firefox Developer Edition. I can type 'i' to switch to insert mode, but how do I return to the normal mode? ESC activates / deactivates the pane of the console, but don't come back to me in normal mode.

  Sorry, I misunderstood. I'm not familiar with the way VIM works. CTRL + C doesn't do what you want?