LaserJet p1102

Similar Questions

• HP Laserjet P1102 by USB "the disk you inserted is not readable by this computer.

  My HP Laserjet P1102 used to work properly with OS X10.10. Then he started to say (now I'm on osx 10.11.4) "the disk you inserted is not readable by this computer" whenever I have the lit, but the printer still work. What should I do?

  I tried with this solution HP Laserjet P1102w by USB "the disk you inserted is not readable by this computer ' Ec Capitan osx's option"repair disk permissions ".

  I can't say if it will work, and it may even be harmful, possibly to the point of making your mac unbootable, so be careful - all the least have a clone of your system disk. If you start using the internet (Command-Option-R) recovery mode, and if your mac is a model that existed prior to El Capitan, it could be that the disk utility you get in this collection is the old version, including the order of repair permissions.

• LaserJet P1102: Stuck on new device is now connected

  Thank you for takeing your time to read this.  I have a problem installing my new LaserJet P1102, the instalation of driver's stuck to new device is connected now... As far as I can see it is a known problem, but cannot find a way to fix it.

  The printer is detected:
  
  

  

  What should I do?

  I have solved the problem, deleted the drivers in the Device Manager and reinstalled windows drivers.

• P1102: HP LaserJet P1102 windows 8.1 and USB3

  Hello

  I recently bought a HP LaserJet P1102 printer and I can not install it correctly in point 8.1 of Windows.

  I have two laptops. Again there is not all USB 2.0 ports and they are all USB3.0. In this new laptop, when I connect the USB cable, Windows says that it can not recognize USB device. I installed the driver many times but I don't know how to solve this problem. I think that this printer has a few problems with USB3.0.

  In my old laptop, I have Linux and Windows 8.1. Under linux, the printer is working correctly, but in Windows, I can't does'nt. Whent I installed the printer for the first time in this window that I could print but after reboot, Windows does not recognize the installed printer and try to detect it as a new. I have so few "LaserJet P1102 (COPY)" in the printer and devices in Control Panel. It seems that whenever I want to print, I have to install the driver.

  Help, please.

  Thank you.

  Well, the next thing to do would be to get a USB 3.0 for printers and see if you have the same problem when using this cable.

• win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102

  win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102
  I have the printer installed that tried to install edimax ps-1216u and when it tries to install the printer, the computer restarts

  Problem solved! I have disabled smart installation with SIUttility for this computer. I have manually installed the printer by adding the port tcp/ip standard and all is ok now.

• Mistake professional scanner of LaserJet P1102 52.0

  The attention of my printer light is all the time and when I want to print it says Scanner Error 52.0. It is a HP Laserjet P1102 Professional

  Hi flexman77,

  Sorry to hear that you click here and check if that helps
  1. ensure that the printer is connected directly to the wall jack and not even though spike protector /protection buster.
  2. update the firmware from the support page of the product, you can click here and select your operating system and then download and install.
  3. once the firmware upgrade is complete, turn off and turn on the printer

  I hope this helps you!

  Make it easier for others to find solutions, if my post has solved your problem, please mark as "accepted solution".

  +++ Say thank you by clicking on the star of congratulations in the post.

  Although I am an employee of HP, I speak for myself and not for HP.

• LaserJet P1102: do not print landscape

  It is surely not normal... I just said my new P1102 cannot print landscape.

  I have not heard this kind of thing being said since about 1987 Symphony finally worked out how to print spreadsheets in format landscape.

  Surely this is not right?

  Can peope really even printers that can't print landscape?

  My problem is this, my old HP printer died recently, so I bought this new, the P1102. Worked great until I tried to print the Excel calendar in the landscape. Just wouldn't do, just do print portrait regardless of what I tried to change the settings.

  Try printing landscape in other software too, but only ever printed portrait.

  Can someone either help me solve this oooooor (gulp...) confirm that this new printer can not print landscape.

  I am astounded that there are always done printers that can't print landscape... say it isn't so... Please...

  Incredible... I answer to my own problem of forum here as Support HP were unable to help me.

  My original problem was that I couldn't print any form on my new Laserjet P1102 landscape software.

  I called and they told me that P1102 'n' print landscape.

  I was stunned.

  Then the guy said that he was jumping on my computer to see if there was anything he could do, he did, and then confirmed my printer CANNOT print landscape.

  Confused I checked then a colleague who also has a P1102 (where my purchase) who say that he has no problem printing landscape at all.

  What the...

  I then noticed something... in my list of printers and devices, the new P1102 was referenced as follows:-

  XPS HP Professional Laserjet P1102...

  What is XPS......? ! My colleagues didn't say that.

  So I uninstalled the printer and re-installed. Now works fine and prints landscape most certainly!

  No idea what is XPS or why he was there, I do not, my printer now works fine, but HOW ON EARTH, a HP technical support guys can say this printer does not print landscape is beyond me. Easy to miss the XPS thing perhaps, but I can't imagine there was a printer cannot print landscape for 30 years so why he said that I have no idea.

  Thus, no faith in the team of support here, I'm afraid. Google has more help.

  E - less for HP, see the teacher!

• LaserJet P1102: HP Laserjet P1102 on Windows 10

  Just got a new system of Windows 10 and it won't recognize my priter Laserjet P1102.

  May I ask if the Laserjet P1102 will work with Windows 10?

  Hey @BarryH2000,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with printing from your PC to 10 Windows for the Laserjet p1102w printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, download and install the latest drivers by clicking on this link.

  Please let me know the results after installing the drivers. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• LaserJet P1102 installation over a network of Corp.

  Hello

  I'm to deploy several Laserjet P1102 on our network Corp. on Windows 7 32-bit.

  I have deployed the P1102 driver to all our Windows 7 PC, but the problem arises when branch P1102 printer via the USB port where the printer shows up as a CD-Rom drive (containing the driver) and not as a printer USB device!

  It is an excellent solution for the consumer that is marked, but on our network, our users are not local administrators and are not allowed to install software / drivers (where the driver via our deploymentsystem preinstallation). I found the SIUtillity.exe, where I can change the mode USB from PC to the printer, the printer / USB port, but I need a solution from the administrator, where I can do it in silence and even better before the printer is delivered to the end user.

  Any solution for this?

  Best regards, Palle Johansen, IT-admin, Ringsted Kommune, Denmark.

  Thanks, but as stated, I know the SIUtility.exe and now I finally found a solution to run the SIUtility in a script.

  You can run the SIUtility.exe with the switch "/ disable" to disable the chip-Install of HP. (And "/ activate" to reverse). Found after a long search of Google:

  FTP://91.220.169.161/pub/drivers/printer/HP_P1102/util/Readme.txt

  SE Option 2!

• HP LaserJet P1102 CE651A does not recognize the new toner cartridge

  I installed a new hp for my Laserjet P1102 toner cartridge, but still get the message "install the black print cartridge"and the orange light blinks.  It worked fine until the toner ran out.  Have tried to reinstall the cartridge and you are using a compatible cartridge, without success.  Can I do, or do I have to repair the printer that appears to be a case to send far from a reconditioned unit?  I am disappointed that he didn't after intermittent use of less than 18 months. It was purchased as the reviews said it would be great for printing of volume, but I have not at this stage yet.

  Any ideas?

  I had the same problem. Remove all paper from the tray. Make sure that no paper is started in the printer. I then replaced the toner cartridge and it was recognized. It seems that if the paper is launched to feed into the printer, then the new toner is not recognized.

• HP LaserJet P1102 cannot print both sides of the paper

  I updated my Windows 8 Windows 8.1 and now I can't print both sides of the paper.

  In my old Windows 8 my printer HP LaserJet P1102 printed the odd sides of the document, then a pop-up window appears and when I click on the 'next' botton and submit the documents to the printer printed the sides of the document. After that the Windows update in the context menu does not appear, so the printer simply prints the odd sides and then nothing happens (just the red flashing on the printer).

  I tried to update the driver (downloaded from your site), but nothing has changed.

  I hope that you can add some useful tips and I can solve this huge problem.

  Thank you!

  Hello

  I understand that you can print is more on both sides.

  When the light flashes try and open and close the lid to see if continues to print.

  (there is no button for the printer but which will resume print jobs)

  I would do a complete uninstall and reinstall the printer software to see if that makes a difference.
  You can download the drivers from this url.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110396&

  Win8 and Win8.1 drivers are the same Version9.0.

  If you need more simply make assistance let me know.

  Please let me know if the printer is connected by usb or the installer on a wireless network.

• HP laserjet P1102: hp laserjet P1102 Installation

  Hello, I bought a new printer, the hp P1102 laserjet printer. I tried to install with the USB cable but I couldn't, so I tried with the CD. With the CD it takes a long time, as more than 3 hours. He goes on to say "the new device is connected now.  The printer is connected to it via cable. What should I do? It takes a lot of time?

  Hello Sarmad123,

  I believe that you are not able to install the newly purchased HP printer, you used the cd that was provided which takes a lot of time, ok so let try by downloading the printer from the HP portal software and install it.

  Please use this link to download the printer software/driver: hp_LJP1100_P1560_P1600_Full_Solution-v20120831 - 50157036_SMO.exe

  Some videos for you help with the installation: http://support.hp.com/us-en/product/HP-LaserJet-P1100-Printer-series/4110394/model/4110303/videos

  Some guides/manuals for your reference: http://support.hp.com/us-en/product/HP-LaserJet-P1100-Printer-series/4110394/model/4110303/manuals

  Concerning
  SATISHP4

  Click on icon "thumbs up" If the question is answered and resolved.

• LaserJet P1102: Driver for LaserJet P1102w

  Need help for my LaserJet P1102w operate with Windows 10.

  Best regards / Tomas

  Hello

  Kindly click on the following link to install the printer driver for the printer.

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-Pro-P1102-Printer-series/4110394/model/4110306#Z7_3054ICK0KGTE30AQO5O3KA30R1

  I work for HP.

  Say 'Thank you' by clicking on the star of congratulations in the post helped you.

  Please indicate the position that solved your problem as "acceptable Solution".

• LaserJet P1102: printer connected to the macbook pro does not let me print double-sided

  I have a macbook pro and an hp laser jet p1102 printer. I checked the duplex printing option, and then the printer printed the first parts of the document, I wanted to print. Then a message appears - "manual Duplex: without changing the orientation, remove the paper from the output of the battery tray and insert into Tray 1 print side down. Do not discard the blank sheets. Then, press the button to go. " I re-inserted paper, but then what I do next as I don't know where this button is Go! Help, please

  Hi @insy,

  I have read your message and see that you are trying to print manual duplex and you get the message to press the Go button. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please, try the following steps to see if it will help solve the problem. Do not take into account the operating system in the title. A solution for this problem is developing. Check the HP website for updates of software and firmware.

  HP LaserJet Pro P1102w printer - Macintosh: only manual duplex printing prints on one side in OS X Version 10.6 when it is connected to a wireless network.

  Good day! Thank you.

• LaserJet P1102: Installed drivers, showing that this page is printing but the printer usually take measures

  Hello

  my printer of seams run very well on old runing computer dell laptop win 7. Now I switched to OSX Yosemite, MacBook Air and I have problems with printing. I have instaled nessesery pilots, even been updated for them, but I can't find a way to print something.

  When I turn on my printer, conect to the laptop via the usb port, press to print the page, I can see that the document is on the queue and also the State of ptinting. Driver is actually showing me the wrong results, as printer prints pages and how much left, but the printer will take no action.

  I don't know what can be the problem, because my printer works. It may be a driver, but I think it's an official for this printer so I'm stuck.

  Best regards

  Milan Radojevic

  Hey @iznogud92,

  Welcome to the Forum from HP Support.

  I see that you are unable to print from the Mac using your HP LaserJet Pro P1102 printer.  I want to help you with this.  I have some suggestions that might help.

  Try the following steps:

  1. Uninstall the printer - click here for instructions.
  2. Fix permissions of the disc on your Mac - click here for instructions.
  3. Once you have finished running the utility above, restart your computer.
  4. Finally, click here to reinstall your printer.

  You are able to print from Mac now?  If not,

  You can add the printer manually and use a generic driver built-in.  Here's how:

  • Click on the black Apple
  • Click on System Preferences
  • Click Print & Fax, print & Scan or Printers & Scanners

  

  • Click the Plus (+)
  • If the Mac detects the connection of your printer (either via usb or wireless) click on 'Use' as shown below
  • Select the generic driver printer PCL

  

  Note that this installation method is not guaranteed, but it could serve as a basic solution.  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!