win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102

Similar Questions

• Tecra S11 BSOD after trying to install BIOS v3.1

  Tecra S11 BSOD after trying to install BIOS v3.1

  I have reinstalled all utility fingerprint successfully. After that I tried to install the new BIOS v3.1, but I got the BSOD
  Win 7 pro
  Where can I find the minidump to see what file that are the problem?

  C/windows/minidump folder is empty.

  Hello

  Do you get the BSOD during the BIOS update procedure?
  Are you using the Windows operating system preinstalled Toshiba? or did you install your own system?

  If you have installed your system, then you should check that the VAP is installed as well.

  Also, I found this info about the update to the BIOS:

  + Attention! +

  + Please close all applications before running the update. +

  + At the end of this process, the computer will be restarted in order to update the EC. +
  + While updating the CE, the screen will not appear and the power LED etc can blink. +
  + The computer may restart several times. There is no abnormal behavior. +
  + Please wait until the computer is restarted fully. +

• After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.

  Visa update problem

  After trying to install the updates.  my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.  I tried to follow the instructions provided here because it seemed to be the same problem.  But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode.  Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '.  I can't get out of this cycle.  I installed the update because it said I needed to install it.

  *************************************************************************************************************************************************

  Turn off your computer by holding the power button for about 20 seconds.
   
  Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears
   
  Disable the automatic restart in the event of system failure:
   
  • Click Start
  • Click on Control Panel
  • Click on system and Maintenance link.
  • Click on the system link
  • In the left pane, click Advanced system settings
  • Locate the startup and recovery area, click the settings button.
  • In the startup and recovery window, uncheck the box next to automatically restart.
  • Click OK in the startup and recovery window
  • Click OK in the System Properties window
  • Close the system window
   
  After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.
   
  For the sake of space I refer you to the article about how to proceed.
   
  System restore
  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx
   
  Windows updates: http://windowshelp.microsoft.com/Windows/en-US/Help/8f259118-0d61-4c7a-8c56-24987e87a8171033.mspx
   
  Please let us know if this solution works for you

  Theresa
  Microsoft Answers Support Engineer

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

  Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

  STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

  Hello

  See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

• After trying to install updates error 80070643 # appears

  Continue to receive the error code 80070643 # after attempting to install updates. Update for microsoft Net Framework 4. Have tried several times to update with

  without success.

  Windows Update error 80070643 http://windowshelp.microsoft.com/Windows/en-US/Help/e5304fc1-9264-4d97-9c35-3c3ad167e1701033.mspx>

  UTC/GMT is 16:48 Thursday, September 1, 2011

• After trying to install a specific program, I get this appcrash, check the event log,

  * Original title: app Crash

  In general, I store my programs on a USB key. I've never had a problem installing or running

  install them on my computuer using windows 7 home edition 64-bit.

  Lately after trying to install a specific program, I get this appcrash, check the event log.

  It seems to say that the file for this installation is damaged, but how can this be since the installation has worked before?

  Get corrupted - it happens.  Jump drives die all the time.  You might be able to reformat (erase) and get more life out of it, or you can get a new USB, install again and use it until it is damaged again.

  Average life of a disk is 5.2 years, but just like people, many drive die younger and many die older. You never know what will be yours.

• After trying to install word printer epsom has not stopped workung - uninstalled but stll not working not

  After trying to install a printer, Epsom SX130, on Windows 7, WORD has stopped working - have tried uninstall & restore but still cannot use WORD. After paying only £ 65.00 to restore the office, I'm very unhappy. It is the only document that we need to print, others may be sent by e-mail, but now I can't even open Word documents to use as attachments to an email. I'm totally desperate, do we buy a 'small' I wonder. More than 60 years, when I started it, maybe I was just too old or it's Windows 7 just make my / our life uncomfortable for us to update: Please keep in mind, I'm very, very, ridiculous with computers. We have done with a drive by the way if that makes a difference & downloaded an update. If the answer is "not compatible" that's fine, I can make documents on the old computer, BUT need words for emails: i.e. repeat orders etc. which are vital to our system of new physicians.

  Am totally fed up now...

  Hello

  1. what version of Microsoft Office are you using?

  2. you receive an error message when you start Microsoft Office Word?

  You can perform the system restore the computer to the date when the changes were made not (before the date where Microsoft Office was working fine).

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  For further assistance on the question, you can post your query in Microsoft Office community:

  Microsoft Office community

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I tried to install windows 7 themes for xp and when I restarted my computer it keeps on opening of session and disconnects me immediately.

  I can't log on because of windows I tried to install windows 7 themes for xp

  Hello

  Step 1:

  Check if you are able to boot to the desktop in safe mode. To start in safe mode follow the link given below.

  http://support.Microsoft.com/kb/315222

   

  Step 2:

  If the problem does not occur in safe mode then boot to the desktop in normal mode and check that the third-party program is causing the problem. To configure your computer to clean boot follow the link below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Step 3:

  If this does not help you try to perform a system restore and see if that helps.

  http://support.Microsoft.com/kb/306084

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm trying to install Adobe Creative Suite for the first time since I replaced my hard drive on my computer. It's saying that the product may be false and it will not be installed. Any suggestions?

  I'm trying to install Adobe Creative Suite for the first time since I replaced my hard drive on my computer. That is to say that this product can be wrong and it won't download. I downloaded before and didn't have any problems. Any Suggestions?

  Use one of the links below

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Is there a real person to talk to?  I tried to install/upgrade Flash level for two weeks!

  Is there a real person to talk to?  I tried to install/upgrade Flash level for two weeks!  It goes to 100% initialization, then the box is empty, and then a Safari window automatically opens on the site Adobe saying install failed.  Tried over and over, completely uninstall and restarting my computer, etc. No. AVAIL.  Have never had any problems before Flash upgrade or one of my CS software and now I find myself with the VERSION number and can not see even my own flash website.  Help, please.  Is there a phone number that I can call?  Thank you!!

  lana241224 wrote:

  I need to talk to a live person.

  You communicate with people living here.  If you really want to talk to someone, call customer service, but they will charge you.

  Back to your problem: try running this installer http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg

• Error code: 0x800F0826 - trying to install service pack 1 for vista

  Error code: 0x800F0826 - trying to install service pack 1 for vista

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error unknown 80070005 error message when tried to install service Pack 2 for vista that someone know what it is

  I tried to install service Pack 2 for vista on toshiba laptop each attempt I get error message80070005 (unknown error) is not on the list of errors does anyone know what this message, or how to correct the problem.

  Hi Cassandra,

  Check if the following might help.

  Updated Windows error 0x80070005 - need a fix? Click here

  See also:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

• I'm trying to install Adobe PS CS3 for my boss on another computer. I put the program on a hard disk and copied to the other computer now, it does not open and said he needs the license. What can I do to make it work on this computer?

  I'm trying to install Adobe PS CS3 for my boss on another computer. I put the program on a hard disk and copied to the other computer now, it does not open and said he needs the license. What can I do to make it work on this computer?

  Copy the program through a new machine will not work.   Install it using installation files and activate using the serial number assigned to the license.

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

• Problem with starting after trying to install XP.

  I have a Samsung NF110 netbook with an external cd drive. The hard drive has two partitions - c: and d:. C: installed Windows 7 and d: was empty. I wanted a machine to dual-boot with Windows 7 and XP in different partitions. I tried to install XP on the d: partition but during installation only choice was installed on the c: partition (replace Windows 7). I decided to do it and then I hope to install Windows 7 on the d: partition later. The installation process copied all files XP from the CD, but when it came to restart it has always tried to boot from the cd and start the implementation process. I tried to remove the cd drive, and then it came with NT invalid Boot.ini detect failed. I tried various suggestions found on forums to fix this. The most popular seems to be to get to the Recovery Console, and then type bootcfg/list and bootcfg /rebuild. When I do bootcfg/list it shows a Microsoft Windows XP Home Edition installed. However after the rest of the instructions for example enter the loading and do/fastdetect identifier does not solve the problem. Someone at - it any other suggestions to correct what I guess is an MBR corrupted. Wouldn't be better to just format the entire hard drive and start from scratch?

  Thanks in advance for any help offered.

  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  You must install the oldest OS first, so XP first then win 7. XP doesn't know how to run win 7, so if you install after win 7, you will lose the ability to boot under win 7. A repair of Windows 7 installation can fix.

  install xp and when you do, be sure to create 2 partitions, one for xp and one for win 7

  http://apcmag.com/how_to_dual_boot_windows_xp_and_windows_7_xp_installed_first.htm

• After trying to install Windows updates, my computer turns off.

  I tried to load 2012 ARO.   In the end there was a request to restart my computer, so I left closed... it has been slain on the third phase of the judgment since then.  Support ARO said that it's a microsoft issue, not a question ARO.  I tried to restart in SafeMode known last... but who doesn't have a wok.  At out the battery, disconnected it, everything that I could think of and nothing works.  Help, please.

  original title: don't stop after update

  (1) never install two security systems on the same computer because of the possibility of conflicts like this.  Norton may have similar tools to what you were trying to install.

  During the validation of the subjects as that one, don't forget to post your operating system of Windows and the computer make and model.

  Recovery discs are here with your system?  Alternatively, did you create recovery discs?  Have you created a boot disk?

  (2) by changing the boot order, you can force your computer to boot from a CD/DVD drive, a floppy, or even out of the network drive.  Use the startup disk or recovery disk if you have one.

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If the answer to the above is failed.

  (3) reboot and start typing the F11 key

  Y at - it a recovery screen?

  Follow the prompts

  Select fix my PC

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

  If the answer is still no, you need to get the site of the manufacturer of the computer recovery discs. I think that you will be able to order Windows Vista or Windows 7 but Windows XP is rained on many sites and an internet search may be more useful in this case.

  How to get the installation discs for Windows XP for installation of boot floppies

  http://support.Microsoft.com/kb/310994

  Bing search engine

  http://www.bing.com/shopping/Microsoft-Windows-XP-Professional-with-Service-Pack-3-32-bit/p/7EC2D538C44375E9D976?q=sale%3A++Windows+XP+&lpq=sale%3A%20%20Windows%20XP%20&form=hure

  Recover Windows Vistsa operating system using HP Recovery - (relates as well to Windows XP)

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00809678&product=18703