LaserJet P1102 installation over a network of Corp.

Similar Questions

• HP laserjet P1102: hp laserjet P1102 Installation

  Hello, I bought a new printer, the hp P1102 laserjet printer. I tried to install with the USB cable but I couldn't, so I tried with the CD. With the CD it takes a long time, as more than 3 hours. He goes on to say "the new device is connected now.  The printer is connected to it via cable. What should I do? It takes a lot of time?

  Hello Sarmad123,

  I believe that you are not able to install the newly purchased HP printer, you used the cd that was provided which takes a lot of time, ok so let try by downloading the printer from the HP portal software and install it.

  Please use this link to download the printer software/driver: hp_LJP1100_P1560_P1600_Full_Solution-v20120831 - 50157036_SMO.exe

  Some videos for you help with the installation: http://support.hp.com/us-en/product/HP-LaserJet-P1100-Printer-series/4110394/model/4110303/videos

  Some guides/manuals for your reference: http://support.hp.com/us-en/product/HP-LaserJet-P1100-Printer-series/4110394/model/4110303/manuals

  Concerning
  SATISHP4

  Click on icon "thumbs up" If the question is answered and resolved.

• LaserJet P2055DN - do not print over the network

  Configure the printer last night as a network printer (which replaces a former 2300dn LJ). It would not print a test page. To verify that the printer was good, I have loaded the drivers on my laptop and connected via usb.  Was able to print a page of test via USB.  Disconnected usb and reconnected power cable. Released and reset the ip address.  Verified the ip address in scathing of the host.   When I ping the printer I usually lose half of the packages.  There are two other HP printers on the network, a P2015dn and a color 2605dn LJ. Ping their IP back to 100% with a ttl = 255. Ping the p2055 produced 4 packets sent, 2 packets received, 2 lost packets, ttl = 64 2 returns.  I changed the printer cables and exchanged the network switch ports (verified the network switch ports by printing to the LJ 2605) with the same result. I can't get the internal web server to mount, or it partially displays or combinations of these.  If this was the old style removable print server as in my lj2300, I could swap out, but it's not like I can do with this model.  When I send a test page to the printer, it displays "printing", the green light on top flashes, the activity on the network card light flashes, but nothing happens. Finally, I get a «this document failed to print "notification on the host, but the printer still says 'printing' and the lights are still flashing.»  Anyone have any ideas?  I think I'm looking at a bad network/print the server maps in the P2055.

  I also had problems printing over the network to the hp p2055dn. There was no problem via USB printing. All the network settings were ok. Can ping, etc...

  Number of days of bickering, finally found that the Config.Security Network should be reset on the physical control of the printer Panel.

  Press Ok on the Control Panel printer--> press down arrow, you get to Setup Menu Network Config--> press Ok--> a number of arrows down you get to Config network. Security--> press Ok--> you have two options - keep or reset--> choose Reset... Network printing should work fine.

• Cannot get LaserJet M175nw print in a network

  I just installed a new 100 Pro M175nw LaserJet printer on my network. However, I am unable to print over the network.

  • The printer is connected to an ethernet cable and configured with a static IP address on the network
  • I use a Windows 7 computer for printing
  • All of the internal functions of the printer work properly for example copy, reports
  • Printers when connected via USB to a computer

  When you use the printer over the network:

  • Digitization of works correctly
  • The integrated mangement of the printer web page works correctly
  • HP Print & Scan Doctor diagnostic tests give the configuration all green ticks
  • Print jobs stay in the queue until they change to an error state.
  • The printer does not recognize the print job at all - no progress message indicating the print on the console document
  • If the printer is in mode 'sleep' it doesn't wake up
  • Print test pages from the installer of HP, the Windows printer properties dialog box, Acrobat Reader and MS Word all fail.
  • All the symptoms remain the same when I turn off the Windows Firewall
  • An another HP LaserJet 2605dn printer on the network will print correctly on a different IP address, but also using the raw format on port 9100.
  • I removed all the drivers for other HP printers in case there was a conflict - no change after you have reinstalled the software.

  Can anyone suggest what I might have forgotten?  Thanks for your help.

  Problem solved.

  Critical steps seem to be:

  • I used the printer management web page (Networking / advanced) to "restore all network settings to their factory default values.
  • I then used the printer console to set the desired TCP/IP configuration - static IP, subnet mask, default gateway. No other changes.
  • The printer then worked correctly.
  • Later, I put the hostname and disabled all network services that I did not - like IPv6, Hello - and the printer continued to work properly.

  The configuration of end result is identical to what I had until I can see - but it works now.

  Thanks for your suggestions along the way.

• HP LaserJet P1102 cannot print both sides of the paper

  I updated my Windows 8 Windows 8.1 and now I can't print both sides of the paper.

  In my old Windows 8 my printer HP LaserJet P1102 printed the odd sides of the document, then a pop-up window appears and when I click on the 'next' botton and submit the documents to the printer printed the sides of the document. After that the Windows update in the context menu does not appear, so the printer simply prints the odd sides and then nothing happens (just the red flashing on the printer).

  I tried to update the driver (downloaded from your site), but nothing has changed.

  I hope that you can add some useful tips and I can solve this huge problem.

  Thank you!

  Hello

  I understand that you can print is more on both sides.

  When the light flashes try and open and close the lid to see if continues to print.

  (there is no button for the printer but which will resume print jobs)

  I would do a complete uninstall and reinstall the printer software to see if that makes a difference.
  You can download the drivers from this url.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110396&

  Win8 and Win8.1 drivers are the same Version9.0.

  If you need more simply make assistance let me know.

  Please let me know if the printer is connected by usb or the installer on a wireless network.

• win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102

  win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102
  I have the printer installed that tried to install edimax ps-1216u and when it tries to install the printer, the computer restarts

  Problem solved! I have disabled smart installation with SIUttility for this computer. I have manually installed the printer by adding the port tcp/ip standard and all is ok now.

• HP Laserjet P1102 by USB "the disk you inserted is not readable by this computer.

  My HP Laserjet P1102 used to work properly with OS X10.10. Then he started to say (now I'm on osx 10.11.4) "the disk you inserted is not readable by this computer" whenever I have the lit, but the printer still work. What should I do?

  I tried with this solution HP Laserjet P1102w by USB "the disk you inserted is not readable by this computer ' Ec Capitan osx's option"repair disk permissions ".

  I can't say if it will work, and it may even be harmful, possibly to the point of making your mac unbootable, so be careful - all the least have a clone of your system disk. If you start using the internet (Command-Option-R) recovery mode, and if your mac is a model that existed prior to El Capitan, it could be that the disk utility you get in this collection is the old version, including the order of repair permissions.

• LaserJet P1102: Stuck on new device is now connected

  Thank you for takeing your time to read this.  I have a problem installing my new LaserJet P1102, the instalation of driver's stuck to new device is connected now... As far as I can see it is a known problem, but cannot find a way to fix it.

  The printer is detected:
  
  

  

  What should I do?

  I have solved the problem, deleted the drivers in the Device Manager and reinstalled windows drivers.

• HP ENVY 4520: HP Envy 4520 - refusing to Scan over the network

  Hello

  We currently have a HP Envy 4520, which print, however don't scan or copy over the network.

  I have downloaded and run the HP doctor tool, but it crashes to Windows Image Acquisition (WIA). This article has been read a few topics here, I restarted the following three services:

  1. Remote procedure call (RPC)
  2. Shell Hardwarew
  3. Windows Image Acquisition (WIA)

  Once I finished at the outset what precedes, the scanner worked as expected. However after a reboot - the problem is more severe. The doctor program crashes at the same section and restart services fail to achieve something.

  All software and drivers are up-to-date by using what has been provided on the HP website.

  The error messages vary as well, for example Adobe, I see "fatal error. Commissioning stopped. "

  Hi @DocCottle

  Thanks for your response!

  I managed to solve the problem. After you reset the windows service, you must then make sure that the printer restarts too! I didn't do that. Once done all is well!

• P1102: HP LaserJet P1102 windows 8.1 and USB3

  Hello

  I recently bought a HP LaserJet P1102 printer and I can not install it correctly in point 8.1 of Windows.

  I have two laptops. Again there is not all USB 2.0 ports and they are all USB3.0. In this new laptop, when I connect the USB cable, Windows says that it can not recognize USB device. I installed the driver many times but I don't know how to solve this problem. I think that this printer has a few problems with USB3.0.

  In my old laptop, I have Linux and Windows 8.1. Under linux, the printer is working correctly, but in Windows, I can't does'nt. Whent I installed the printer for the first time in this window that I could print but after reboot, Windows does not recognize the installed printer and try to detect it as a new. I have so few "LaserJet P1102 (COPY)" in the printer and devices in Control Panel. It seems that whenever I want to print, I have to install the driver.

  Help, please.

  Thank you.

  Well, the next thing to do would be to get a USB 3.0 for printers and see if you have the same problem when using this cable.

• Why convert? What is the advantage? Why convert it before you send the data over the network?

  Hello everyone.

  I have a question quite simple and intuitive. Yet Google does not seam to get the answer.

  Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?

  Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?

  I've been curious about this for a while and have yet to find an answer. Any help is appreciated.

  Thank you
  Taylor S. Amarel

  tsa256 wrote:

  Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?

  It really depends on the specific situations.

  For example, some functions explicitly require certain types of data as inputs if they are not polymorphic.

  This means that if you do not convert the data yourself and you will see a red dot forced LabVIEW will do it for you.

  As to why the data was not the correct data type in the first place, it is sometimes inevitable.

  A few examples

  -What happens if you just read a text file as a long string.

  If there is digital data in this file, you need to analyze, and then convert it to a usable type (int, sgl, dbl, etc.)

  -you are given a 3rd part VI, dll, etc. that returns a numeric value as a double, but you need the value to I8.

  You cannot change the output of the function given to you, so what you can do to remedy this situation is cataloged data.

  tsa256 wrote:

  Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?

  Somehow, this is my first response, but in a more general sense.

  Many functions down to the level of the OS run in binary.

  If your data are not already in binary, the sending computer must convert it to binary, and then send it, have the receiving computer convert in return.

  Two conversions on each side of the transmission add unnecessary delays.

• LaserJet p1102

  I'm considering the purchase of the Laserjet P1102.  It will print from Internet Explorer 9 and Windows 7 Professional?

  Thank you

  Petewill salvation,

  Based on driver search, it looks like a driver is available for Windows 7 and P1102.

  Here is a link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4110304&LC=en&cc=us&DLC=en&lang=en&cc=us

  Just select your operating system Windows 7 32-bit or 64-bit Windows 7.

  Once the driver is installed, you should be able to print with your installed applications, including IE9.

  The following link contains a list of LaserJet not supported for Win7:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c02535920

• I can restore the backup made by WHS v1. PP3 the WHS 2011? Or do I need to copy the files over the network of old serevr again?

  WHS backup

  You just bought a new WHS 2011. Question, can I restore the backup made by WHS v1. PP3 the WHS 2011?  Or do I need to copy the files over the network of old serevr again?

  Hello

  Because the problem is with Windows Home Server, I recommend you post this question in the Forums Windows Home Server.

• Mistake professional scanner of LaserJet P1102 52.0

  The attention of my printer light is all the time and when I want to print it says Scanner Error 52.0. It is a HP Laserjet P1102 Professional

  Hi flexman77,

  Sorry to hear that you click here and check if that helps
  1. ensure that the printer is connected directly to the wall jack and not even though spike protector /protection buster.
  2. update the firmware from the support page of the product, you can click here and select your operating system and then download and install.
  3. once the firmware upgrade is complete, turn off and turn on the printer

  I hope this helps you!

  Make it easier for others to find solutions, if my post has solved your problem, please mark as "accepted solution".

  +++ Say thank you by clicking on the star of congratulations in the post.

  Although I am an employee of HP, I speak for myself and not for HP.

• HP 2520HC: install the software of the printer over the network

  Hello

  I use the HP 2520HC series at the office. I use a network connection.

  Printing works fine, however I want to be able to scan as well. I downloaded the printing software, but the only option I choose, connect via USB? The printer is connected to another PC, so this isn't an option.

  Please help me.

  Hello

  such a USB printer allow only all features on a directly connected USB computer.

  Sharing a printer over the network allows sharing of a printer, Windows don't offer any scanner, the sharing feature.

  You can print from another PC to a shared printer, you will not be able to analyze such, to analyze the use of the computer connected directly to your printer via a USB port.

  Kind regards

  Shlomi