Laserjet pro m477fnw color: Color laserjet pro m477fnw is possible to add a duplex?

Similar Questions

• Is it possible to add the MiniPCI WLAN Module for Satellite Pro 4300?

  Hello

  I got a 4300 Satellite Pro and I want to add a WLAN MiniPCI Module. Is this possible and is someone able to provide details where to add this module for example some technical documentation in images.

  Greetings
  Florian

  Robin is right about the upgrade. It is not possible. in my opinion the best solution for you is to use a PCMCIA WLAN card.

• HP Laserjet M4345 MFP: Can I add a Duplexer for my M4345 MFP printer?

  I have the HP Laserjet M4345 MFP base model and I was wondering if I can add the duplexer, so I can automatically print on both sides.

  Thank you

  If she is not a duplex unit, it is easy to add it simply slips in the lower part to the fuser unit.

  Then you just power cycle the machine and it is detected and begins to work.

  You don't have to change a configuration so that he knows that the duplexer is installed the driver.

• Can I connect my new MacBook Pro on my iMac to add contacts, calendar, etc. on my new camera?

  My new MacBook Pro is must happen Wednesday.  Can I plug it into my iMac for contacts, the calendar, the etc added to the device again?

  Follow the instructions here > move your content to a new Mac - Apple Support

• Is it possible to add a HIGHLIGHT / COLOR for a browser window open on the taskbar?

  Hello. We use Outlook Web APP.
  At the same time, we have several windows open on the taskbar.
  Is it possible to be able to highlight or maybe 'color' expressly only this browser window is no longer visible among all the other open windows?

  Thank you.

  I don't think that it is possible to set a background color the buttons of the label on the Windows taskbar-specific because this bar is under the control of the Windows operating system.
  
  What is displayed above is to set a specific color to tabs in a Firefox window.

• Satellite Pro A300 1NT - Possible to upgrade to Windows 7?

  Hello.

  I intend to buy the Satellite Pro A300 1NT, but want to make sure that I can not upgrade to Windows 7 and more specifically the characteristics of touch screen.

  Thank you for taking the time to consider my question.

  Hello!

  I think that no one can say whether the Satellite A300 compatible with Windows 7.
  Windows 7 is not on the market yet, and I think it will take a few times to release.

  And Satellite A300 doesn't have a touch screen, so I think that you cannot use these features on this laptop.

  Good bye

• Satellite Pro U400-11V: possible to increase the 60 Hz screen refresh rate

  I have a laptop Toshiba Satellite Pro U400-11v.
  I just realized that my screen refresh rate is 60 Hz (resolution 1280 x 800).
  Even I decrease the resolution. It won t be another option 60 Hertz.
  Is it possible to increase it?
  My monitor is indicated under the generic name of the PnP in the system.

  You cannot increase the internal laptop display refresh rate and it of not necessary to go higher, because all the internal laptop screens are running at 60 Hz.
  If you would like to connect an external monitor, you will probably see higher available for the external monitor refresh rates.

• Satellite Pro A300D - How can I add a second HDD?

  Hi there guys and girls,

  I noticed that my Satellite Pro A300D has a slot for additional HARD drive on the right side, but no hard drive case and not screw and the cover has sharp things on this

  How can I keep these so I can add an additional HARD drive.

  Thank you very much.

  All laptops are pieces can be purchased from the local ASP.
  Contact the ASP in your country and ask the compatible laptop parts...

  See you soon

• 8 GB + 2 GB Macbook Pro late 2011 - Possible?

  Hey,.

  I bought a bar of 8 GB 1333 Mhz of Crucial to add to my Macbook Pro 13 ", end 2011, which currently has 4 GB. Only after I ordered it, I realized that the 4 GB came in 2 + 2GB sticks. A rookie mistake, I know.

  My question is this: is it possible to get the 8 GB in a RAM slot and keep the 2 GB in the other, for a total of 10 GB? Or is it better to let the one with 8 GB?

  I know that Apple in its recommendations stipulates that the maximum is 4 + 4GB, but Crucial and many other users have used up to 16 GB in such a MBP without problems and optimize performance. Can someone provide feedback on which would be the best option?

  Thank you
  Vasco

  MacBook Pro (13 inch, late 2011)

  2.4 GHz Intel Core i5

  Intel HD Graphics 3000 384

  4 GB 1333 MHz DDR3

  Install it.  It will work and be beneficial.  That said, it is not as effective as a set of RAM of capacity equal.  Yield loss will be 10%-15%.

  When the bank account permits, order another 8 GB module and then install it for a pair of 16 GB.  That's what I have in my 2011 Mbps.

  Ciao.

  Addendum: I should make it obvious that you should also keep a module of 2 GB for a total of 10 GB of RAM.

• LaserJet 5 M and Windows 7 64 bit - duplex problem

  I have a Laserjet 5 M Postscript with a duplex printing unit in my home network.

  Windows 7 64-bit, the duplex printing option is not displayed.

  1. I reinstalled the driver - cool from MS
  2. I manually changed the ' properties/device settings' to indicate the duplex unit is "installed".   I have administrator privileges.
  3. I rebooted the machine.

  However, under preferences - or for actual printing, under available - possibility of double-sided printing is not displayed.

  Any help will be appreciated.

  My two machines from Vista (32 & 64 bit), with no problems, print double-sided on it.

  Alright George. I have discussed this with my colleuges and we agree that this thread would be better suited in the business forum. Since it is a printer and we focus only on consumption patterns. We would do a disgrace to not send you over there.

  Here is a link to Board commercial laserjet.

  Business - LaserJet HP Support Forum

  Im going to have a moderator hover over this thread to the business section for the best chance to get a solution.

  Take care!
  Sean

• HP Officejet Pro 8600 no possibility to configure the Port

  My OS is Win 8.1 (last version), latest version of the printer driver, last wizard to install printers used.

  My first printer "HP Officejet Pro 8600" folling down on the issue of the screen. I'm doing a swap with the same model, I have to uninstall and reinstall the full with Wizard, now I have some difficulties to recognize the printer.

  -Shortly, no communication!

  -A few times, printing find after printer communication error.

  If I go to "Properties/Port/port" I got "Error Message.

  > An error occurred during port configuration.

  > The file name, directory name or volume label syntax is incorrect.

  Could be a former key stay in the registry (with the old link to the printer)

  I have to uninstall and reinstall the wizard fuul without success.

  Now the analysis feature does not run and printing run with delay.

  Major Remarq:

  I have no problem with MAC OS 9.x to 10.10.1

  Thank you very much in advance for your support

  Hello

  The port must not be changed that way but through the HP software, it is managed by the software and such a mistake is planned during the attempt to change the port...

  Try opening the HP Officejet Pro 8600 software, and then click the Utilities.

  Click Update IP address and type the IP address of the printer, which can be found by clicking on the icon wireless/network at the top of the Panel before you the printer.

  Click on save and confirm, then close and reropen the HP software,.

  What happens when you try to scan now?

  It'll work, or is there a specific error or behavior?

  As well try now the doctor of printing & scanning HP, it is listed under the Utilties batn so, follow the steps on the screen by selecting the difficulty of analysis and let me know the results if you are still having problems.

  Shlomi

• OfficeJet pro 8600: not possible to change the scanning of the Panel of the printer resolution settings

  With my Officejet pro 8600, there is no possibility to change the scanning resolution settings when you are working in the control panel of the printer (not present button to touch) when I want to scan to the computer, while in the manual it is mentioned that, after pressing the Document Type, it should be possible to reach the resolution to change the resolution of the scan setting. On the other hand, when the scan to a memory card the button change the resolution settings is present.

  Sometimes for the scanning of all computers to select (winXP SP3 installed on it). The HP printing software is installed on all computers and manage digitization to the computer is turned on. It is possible to change the resolution settings when using my computer with the HP printing software, but as I said not in the use of the printer.

  Thank you to help you solve the problem!

  Hey mk75053,

  Scanning to memory card has the parameters of resolution through the front because that is the only way for the device perform this type of analysis.  However, to change the resolution settings for the Scan of the computer, one will have to perform scans through the software installed on the PC.

  I have all three types of 8600 models where I am located (base, more high quality) and of all printers simply ask to start the analysis after selecting the scan type.

  I hope this helps.

• HP Laserjet P2035n is set up to print in duplex, but I can't change it in preferences

  Last week, I download and print a PDF file. Since then, my HP Laserjet 2035n is configured to print in duplex. Here are the details.

  • I use a laptop HP Pavilion with Windows 7 Home.
  • The printer is configured as a network printer.
  • When I try to print something, it stops after a page waiting for me to re - feed paper manually to print on the other side.
  • It is only this laptop that has messed up. My other computer prints well

  When I go to the printers, right-click on the 2035n and select "Printer properties" and look at the bottom of the general tab, it reads in the appearance tab "Double-sided: Yes.

  If I then click on "Preferences... "and go to the finishing tab, under Document Options, the box"print on both sides (manually)"is unchecked.

  Here is what I tried:

  • I uninstalled and reinstalled the printer
  • I reinstalled printer drivers
  • I tried to reinstall with a different name

  Any suggestions? Can someone tell me where the printer preferences file is so I can manually remove and then reinstall the printer drivers? Is there a tool for the P2035N to uninstall everything related to it?

  Thank you.

  Hello

  Please try the following settings:

  Right-click on the printer icon, then click on printer properties.

  Click the device settings tab.

  All the way down, uncheck the option enable manual duplex printing .

  Now try printing and search of any change.

  Please let me know of any changes,

  Shlomi

• OfficeJet Pro x476dw: How can I add fonts to OfficeJet x476dw printer?

  I just installed a new Officejet Pro x476dw all-in-one.  It's a great printer.  The question I have is we use fonts Oswald as the standard of our company and when I try to print this it does not display properly.  I ran reports and as you can see that Oswald is not on the lists of fonts so I think that we must add to the printer.

  My goal is to get fonts Oswald print correctly.  Please let me know what I have to do to get there.

  Robert

  The printer driver may include an Advanced Preferences option to "Send TrueType as Bitmap".

  If selected, this will cause several (rather than one or two scalable) bitmap soft fonts to download, one for each size of font required.

  If there is a firmware issue interpreting fonts downloads soft, maybe it's that this only affects the scalable fonts, not only bitmap fonts, so it is perhaps interesting to try?

• Is it possible to add additional color labels?

  Currently in Lightroom it seems only 5 color choices for the tagging of photos. I have group photos using color labels, but I often have more than 5 groups (eg. panoramas), and I find the star systems not suitable for this purpose. Is there a way to add additional color labels to the existing group?

  Not really.

  There are essentially five colors. BUT you can add different names for examples, see metadata > color label set > Edit... You might have a set for use with panoramas, one for the HDR, etc.. But a picture can have that ONE label at a time.

  A MUCH more flexible and scalable system is to use keywords for the same info, like Photo > Panorama and Photo > HDR and Photo > support, etc. You will not see a color in the grid, but the list of keywords makes it easy to do what you want. Photos may contain a number of keywords, so you can have the two 'To Do' as a keyword and "print" or something else.