Last call for PM 7600: flat screen?

Similar Questions

• Need for a method to be called when the pop-up screen

  Hello

  I have a requirement in my application. I have a screen from which I'm moving to screen B. When I Pop the screen B, I need a method that must be called in the screen has. Looks same as onActivityResult() in Android.

  I am currently using onExpose(). But this method is called for all in the screen has. In the menu click or button also. Is there another way to do this?

  Help, please...

  You have two options I can think immediately, which do not have to change anything in screen B.

  (1) use pushModal when you call B screen.  The statement immediately after the pushModal will be executed as soon as B screen is popped.  In general, I try to avoid the modal screens, but in this case, it's probably what I would do.

  (2) set an indicator immediately before you tap screen B.  Test the flag in onExposed().  If the flag is not set, then the onExposed was called for another reason and you can ignore it.  If the flag is set, then turn him off and process you want, knowing that the screen that has been exposed as screen B jumped.

  Either should work for you.

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Impossible to get any color hang a flat screen for laptop with vga cable

  When I hang up my flat screen tv to my laptop using a vga cable, colors are disabled

  Hello raijalother,

  Do we not have the latest driver installed for the video card?

  My recommendation would be to download and install the latest version of your driver from the manufacturer of your computer video card.

  Best regards

  Matthew_Ha

• j5create usb dvi for monitor flat screen display adapter

  I received a box that popped up when I was installing a usb to dvi display adapter model jua230 on my windows xp pc. He said I need to check compatibility and check to see if it passed the windows logo test. Is it okay to install on my computer? I'm trying to fix a flat screen to a processor that does not have a dvi port. The warning said that it could possibly cause problems for the computer in the future.

  Thank you for your help.

  Hello

  The message seems to be due to the fact that manufacturing had not their WHQL certified driver. The device driver can still install and the device might work. The message is a warning that the driver has not been tested.

• Resolution for screen wide flat screen is too small (already tried native resolution and dpi)

  Short version of my problem is the following. I have a Dell Inspiron 530 w/Vista. I recently had to reinstall Vista to a deformation of the BONE. Now that everything is reinstalled and updated, everything is too small. Text is about a size 4, web pages appear with all focus on areas on each side w/empty space.

  I already tried to change the resolution but other dimensions make the screen either too wide or too high, I tried to change the dpi to 120, which still has not resolved the smallness. I'm at my wits end, trying to figure out what the issue could be and would love other suggestions to try.

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you shoulddo at least for video cards and monitors and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  In Internet Explorer, click Page in the toolbar of the order (if it is not there, do a right-click on the toolbar with the tabs, and then check the toolbar command to add) and access the Zoom and text size and see if the setting solves those problems with this program (I often accidentally hit the shortcut key causing that to happen and it always fixes it).

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  I hope this helps.

  Good luck!

  If none of this works, try to uninstall the flat screen widescreen (everything including configuration in display properties, pilots in devices, connections and any other partner Manager and reboot and see if your screen returns to normal.)  If so, something on the flat screen is the origin of the problem and you may need to consult the manual, installation instructions or whether, you can find about it (you already have the most recent files in the first paragraph above) and try to install again to see if the problem comes back.   If all goes well, the same resetting will solve the problem unless there is a problem of basic compatibilility.  What is the manufacturer, brand and model of the flat screen and how exactly is it connected (the precise connection device and methodology)? Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I bought the Creative Suite 5 cloud in June 2010 (Ser # DELETED) if I recall with two licenses, one for my laptop iMac book Prod and one for my iMac 27 "flat screen.  My Mac Book Pro needs to be replaced by a newer Mac Book Pro wi

  I bought Cloud Creative Suite 5 in June 2010, if I recall with two licenses, one for my laptop iMac book Prod and for my iMac 27 "flat screen.  My Mac Book Pro should be replaced with a new Mac Book Pro with recent operating system software upgraded OS.  What can you do for allowing me to transfer my course in Creative Suite 5 for my new Mac Book Pro?

  [NEVER SEND A SERIAL NUMBER IN AN OPEN FORUM.]

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Improved image for GeForce 7600 on Qosmio G30-188?

  In my "new" G30-188 manual, there is a picture with a menu called Toshiba improved image for Geforce 7300 on page 8-31. It is described that you can change the settings for the video and the TV picture. But on my G30-188, which has the GeForce 7600 I Don t find any menu picture Toshiba development.

  Can anyone?

  The 7300 in some machines and this section applies to this. There is no tool for improving basic windows for the 7600 (I have one in my Qosmio) but you can change the settings in the Qosmioplayer by going in the configuration screens (F1 or F2 I think.

  Hope this helps

• I know where the last call from my iphone stolen?

  I know where the last call from my iphone stolen?

  Not anyone here, not Apple. You can check with your operator if they used your SIM card, and you may have to get the police involved for the information about the location. If it was not your SIM card, you would not be able to.

• Windows recognized my flat screen digital and stuck in 1024 x 768 monitor

  Recently, my laptop suddenly narrowed the screen down to 1024 x 768, even in the BIOS and when starting. In Windows, the screen is recognized as "digital flat screen, 1024 x 768, 60 Hz. Here is a photo I took with my cell phone:

  

  Can someone please help me identify the problem and bring me a solution to this problem? Thank you in advance.

  HP Pavilion DV4T-1400, with Intel GM450 graphics card.

  This isn't a problem-solving. This is the case when Windows does not recognize the monitor he used the default settings for the device not recognized. After I have run a sfc command and run the automatic update of Windows, the problem has been resolved.

• I have a View Sonic LCD 24 inch flat screen and it has a blue tint, how can I solve this problem?

  I have a View Sonic LCD 24 inch flat screen and it has a blue tint, how can I solve this problem?

  Hello

  He got this 1 day, or has it just begun?

  If it was always this way, it could be a manufacturing defect or your advanced display settings may be incorrect. The latter can be determined according to the settings/Advanced/display/personalization in the control panel settings. See Customization here, it varies depending on the manufacturer, but you focus on controls that adjust color output.

  If it has started, then it is possible the monitor had a malfunction. I put another monitor (if available) on the system. If the problem persists, then the fault is in the video card or display drivers. If it disappears, then the monitor can go wrong (you can try to adjust the settings on the screen itself to see if it has no effect). If it turns out to be the graphics card, I would like to firstly download and install a new set of drivers for the graphics card or the manufacturer of the system (the best for download, then uninstall the current set restart and install the new download).

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• PROBLEM WITH CONNECTION FLAT SCREEN

  WHEN I PUT COMPUTER ON SAFEMODE FLAT SCREEN WORKS BUT ON THE NORMAL WORK WHICH IT SAYS OUT OF RANGE BUT IVE PUT THE RESOLUTIONS SETTING THE LOWEST AND HIGHEST AND STILL NOTHING WHAT CAN DO TO MAKE IT WORK FOR MY DEST TOP

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• Laptop crashes lately and almost everyday for error on blue screen now 4 days

  Laptop will be just crashed. It either just shuts off and restarts itself with an error message. I managed to copy the details of the error box:

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode:                                               c2

  BCP1:                                                    00000007

  BCP2:                                                    0000110B

  BCP3:                                                    00000000

  BCP4:                                                    0020006C

  OS version: 6_0_6002

  Service Pack: 2_0

  Product:                                               768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini031810-01.dmp

  C:\Users\Dri\AppData\Local\Temp\WER-81463-0.SysData.XML

  C:\Users\Dri\AppData\Local\Temp\WER3B7.tmp.version.txt

  Read our privacy statement:

   http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode:                                               c2

  BCP1:                                                    00000099

  BCP2:                                                    00200032

  BCP3:                                                    00000000

  BCP4:                                                    00000000

  OS version: 6_0_6002

  Service Pack: 2_0

  Product:                                               768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini031810-02.dmp

  C:\Users\Dri\AppData\Local\Temp\WER-189354-0.SysData.XML

  C:\Users\Dri\AppData\Local\Temp\WER4864.tmp.version.txt

  Read our privacy statement:

   http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode:                                               c2

  BCP1:                                                    00000007

  BCP2:                                                    0000110B

  BCP3:                                                    43398771

  BCP4:                                                    00610065

  OS version: 6_0_6002

  Service Pack: 2_0

  Product:                                               768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini032010-01.dmp

  C:\Users\Dri\AppData\Local\Temp\WER-68000-0.SysData.XML

  C:\Users\Dri\AppData\Local\Temp\WERD1CF.tmp.version.txt

  Read our privacy statement:

   http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  What should I do? Help, please

  Hello

  It is more often than drivers of other possibilities in memory, antivirus/antispyware/security
  programs. BlueScreenView utility will allow you to read and post in post here without
  downloading the minidumps and it will list the most likely (s) 1. Discover also
  MyEventViewer in case there is something (for example, the driver who is more suspicious).

  Check the pilot controls and memory in the next message when you get to those of the
  convenience store and then return to the if necessary troubleshooting tool.

  BCCode: c2 0x000000c2
  
  The BAD_POOL_CALLER bug control has a value of 0x000000C2. This indicates that the current thread is doing a bad pool request.

  BCCode: c2 0x000000c2<-- read="">
  http://www.faultwire.com/solutions-fatal_error/bad-pool-caller-0x000000C2-* 1195.html

  ==========================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Dell flat screen monitor appears to be generic monitor

  I've seen several posts with no solutions.  I just Touchsmart 15 t with a 3.0 Targus docking station.  Monitor flat screen Dell as second screen quality is very bad.  Device Manager shows that the monitor has a generic driver.  I downloaded the driver on the Dell website, but Device Manager will not be updated with the new driver.  There are generic.  Is it possible to have my second screen (Dell) properly with the correct driver?  Thanks for your help!

  Hello

  You have 3 providers for a single connection here. I still believe that the man in the middle is the problem. Please install driver Firmware and video for it on your computer and try again:

  http://www.Targus.com/us/download.aspx?region=7&SKU=ACP70USZ

  Kind regards.

• How to make a box for error off my screen. Wrong e-mail address does not pass & I always get error days later

  How to make a box for error off my screen.  Wrong e-mail address does not pass & I always get error days later

  Hello

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would be grateful if you could help me with more information.

  • You use the Windows 8 Mail or any other email client?
  • When was the last time it was working fine?

  If you encounter problems with Windows Mail app, try the following steps.

  Step 1:

  Please go to the link below, download the file and run it.

  Run applications troubleshooting

  Download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Step 2:

  I suggest to go through the link and follow the given procedure. Here is the link for your reference.
  Solving problems with a soft

  Hope this information was useful.