last paintings when try to use app

Similar Questions

• Get the error code 0 x 80070002 when try to install apps from the app store for Windows 8

  When I try to install apps from the app store for windows 8, I get an error code 0 x 80070002. I have a Lenovo laptop.

  I had this problem and I have searched and searched for a solution. Finally, what worked for me was creating a new account, don't use do not account the store put in place.

  1. make a new account with a different email address and

  2. move all the information that you have your first account to the new account.

  3. delete the first account and create a new account with the first e-mail.

  4. once do you move all the programs and files back into this account and delete the account with the different email address.

  This is what worked for me. He was very involved, but doing it this way is not reset your desktop settings and others. You can search the exact solution I described above, because I did it in February and I don't know that I've linked all the steps correctly.

• Do a Windows Update 80070490 error when try to use windows update

  I get an error 80070490 when I try to install the following updates

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  Update for Windows Vista (KB979306)

  They are listed as important updates.  I installed the other updates for Windows Defender, but these do not seem to settle.  My history of update, it seems that the problem began around 12/03/2010.  Is when updates tried to install, but they have not and they tried to settle down since then.  I have to do a system restore.  What do you guys recommend.  I did a Norton Scan, scanned with malware, CC Cleaner Registry tool and run all that much good.  Nothing found.  Fixed all errors registry with CC Cleaner and they still do not work.  Even scanned with windows defender.  Doesn't seem to be a virus, would not exclude it.  Everything seems fine.  Help, please.  Thank you.

  As you say, that you have a "Dell" can also be interested in this:
  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&docid=347576&l=en&s=Gen

  ----------

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair installation (AKA In - Place Upgrade) will not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista updatehttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1/SP2 has been installed.

  Uninstalling SP1 or SP2

  The reason being that the original installation has been updated with SP1/SP2 and so the possibility of upgrade is not available because you have is newer that what you started with so Service Packs must go.

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Problem when try to use the connection to the server with Viewplanner view

  Hello

  When I try to use a profile of the workload with the view connection server, I have the following on the viewplanner device error message.

  Exception in thread thread 2:

  Traceback (most recent call modified)

  File 'usr/lib/phyton2.6/threading.py' line 532, in __bootstrap_innerself.run)

  File "/ tmp/ViewPlanner/web_interface.py", line166, run

  File "/ tmp/ViewPlanner/view_interface.py", line 308, addGroupEntitlement

  AttributeError: 'NoneType' object has no attribute 'callRemote '.

  On the view connection server, I see the following error message repeated every minute

  Starting the Agent of ViewPlanner service DEBUGGING

  INFORMATION of starting the server twisted on the machine to harness send commands...

  Any ideas?

  Kind regards

  Christian

  Have you applied the patch? You may have replaced the __init__.py file in the directory c:\view-python-apis\mfw instead of c:\view-python-apis\mfw\channel directory? You can take the original packaging of the instillation file and replace that?

• Error when try to use the rowid with the table alias

  I tried using a table alias to test the functions of Manager of rules and met the following problems.
  
  1. I have clone from a schema HR employees and departments tables.
  
  2. create data as follows:
  
  BEGIN
  dbms_rlmgr.create_event_struct (data = > 't_a');
  dbms_rlmgr.add_elementary_attribute (data = > 't_a',)
  attr_name = > "a_employees"
  tab_alias = > exf$ table_alias ('employees'));
  dbms_rlmgr.add_elementary_attribute (data = > 't_a',)
  attr_name = > "a_departments"
  tab_alias = > exf$ table_alias ('departments'));
  END;
  
  3. create the class rule as follows:
  
  BEGIN
  dbms_rlmgr.create_rule_class (rule_class = > 't_as',)
  Event_Struct = > 't_a. "
  action_cbk = > 't_acb ',.
  rslt_viewnm = > 't_arv');
  END;
  
  4. After adding a rule to the rule class, I try to test as follows
  
  DECLARE
  r_emp ROWID.
  r_dept ROWID.
  CURSOR a_cur IS
  SELECT emp. ROWID, Dept. ROWID
  Employees OF ministries dept (IEM),
  WHERE emp.department_id = dept.department_id;
  I have NUMBER: = 1;
  BEGIN
  OPEN a_cur;
  LOOP
  EXTRACTION a_cur
  IN r_emp, r_dept;
  EXIT WHEN a_cur % NOTFOUND;
  dbms_output.put_line (i);
  i: = i + 1;
  dbms_output.put_line (r_emp);
  dbms_rlmgr.add_event (rule_class = > 't_alia',)
  event_inst = > r_emp,
  event_type = > 'employees');
  dbms_rlmgr.add_event (rule_class = > 't_alia',)
  event_inst = > r_dept,
  event_type = > "departments");
  END LOOP;
  END;
  
  But I got the following error
  
  SQL > DECLARE
  2 r_emp ROWID.
  3 r_dept ROWID.
  4 a_cur CURSOR IS
  5. SELECT emp. ROWID, Dept. ROWID
  6 employees OF ministries dept (IEM),
  7 WHERE emp.department_id = dept.department_id;
  8 I COMP: = 1;
  BEGIN 9
  10 a_cur OPEN;
  11 LOOP
  12 FETCH a_cur
  13. IN r_emp, r_dept;
  EXIT 14 WHEN a_cur % NOTFOUND;
  15 dbms_output.put_line (i);
  16 I: = i + 1;
  17 dbms_output.put_line (r_emp);
  18 dbms_rlmgr.add_event (rule_class = > 't_alia',)
  19 event_inst = > r_emp,
  20 event_type = > 'employees');
  21 dbms_rlmgr.add_event (rule_class = > 't_alia',)
  22 event_inst = > r_dept,
  23 event_type = > "departments");
  24 END LOOP;
  25 END;
  26.
  DECLARE
  *
  ERROR on line 1:
  ORA-06550: line 1, column 36:
  PLS-00201: identifier 'AAAVN9AAEAAAQH8AAA' must be declared.
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  ORA-06512: at "EXFSYS. DBMS_RLMGR', line 974
  ORA-06512: at line 18 level

  Hello

  ROWID for individual tables can be added as events only if the rule class is set up as a Composite. For all other cases, ROWID is treated as data and they need to be formatted as a string of instances of AnyData or name-value pairs. Your script is to think that you intend to create a composite rule class while you might add ROWID individually. If please, recreate the rule as a composite class and try again. The error message you received is incorrect and has been corrected to indicate that the error is with the format data point past.

  Hope this helps,
  -Aravind.

• Everyone try to use app VLC with Airport Extreme by car?

  I have the new VLC app installed on my Apple TV4. I also have a USB drive connected to my current gen Airport Extreme. I have a video file (Video_TS) residing on the drive from the airport. When I run VLC on the ATV4, under the "local network" menu, I regard the airport as an SMB share. When I connect to the share, I get a message of "empty folder" app VLC.

  If I run the VLC app on my iMac I can select content from the airport drive and play it wihtout back issue.

  I learn about the network that I proceed. Any help as to how I would get VLC to see the files on my Airport Extreme?

  I'm having this same problem. I even tried MrMc with no luck.

• Error - cannot locate the DNS server of comments when try to use the Windows XP Edition computer remotely family assistance.

  Original title: cannot locate the comments of my windows xp home dns server.

  We have all two windows xp home, only difference, I can say is in the exception of firewall computers comments tab, there is no box remote assistance to check or uncheck.
  whenever we try I get it's message. Could not locate dns comments.
  something terribly simple became simply terrible.
  Thank you

  THANKS A LOT FOR YOUR CONTINUOUS SUPPORT. USING WINDOWS MESSENGER AND ACTIVATE THE REMOTE ASSISTANCE, AFTER FLUSHING DNS CACHE, WE HAD NO CONNECTION PROBLEM. ALTHOUGH STAY CONNECTED WAS A PROBLEM. NOW IDENTIFIED AS THE NETWORK ADAPTER ITSELF IS DEFECTIVE. I WAS ABLE TO SOLVE MOST OF THE QUESTIONS ON MY FATHER'S COMPUTER, IMPOSSIBLE WITHOUT YOUR TUTALIDGE. SO I HUMBLY GIVE THANKS TO PEOPLE LIKE YOU WHO UNSELFISSLY GIVE THEIR TIME. I AM OF COURSE SPENT ON CREDIT TO MY FATHER AND OTHERS SO THAT THEY TOO WILL SHARE THIS EXPERIENCE WITH OTHERS. AT THE PRESENT TIME, HE HAPPILY TALKS TO FRIENDS IN THE OLD COUNTRY IN THIS ONE. HIS 'SOCIAL' NETWORK ONCE MORE ALIVE WITH OLD FRIENDS. Thank you very much.
  RON

• Orb iTunes turns when you try to sort Apps on Iphone s 6 using Mac or PC. How can I solve this problem?

  Orb iTunes turns when you try to sort Apps on Iphone s 6 using Mac and PC at different times. Applications do not appear to the right of the applications that are registered in the ITunes applications library. How can I solve this problem?

  Hi leon4444,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are having these problems with your iPhone. I'm kinda not clear on the exact nature and scope of the issue you describe, but if you are having problems sorting or organize your apps using iTunes, you can verify that you follow the procedure described in the following article:

  12 iTunes for Windows: Sync and organize iOS apps

  Concerning

• DEP DEP is triggered when I try to use MSWorks. When I try to disable it for this app it says that it cannot be disabled

  DEP

  DEP is triggered when I try to use MSWorks.  This has just begun.  When I try to disable it for this app it says that it cannot be disabled.  What is going on?

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  Above is a tutorial on how to turn off DEP for a particular program.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Officejet 6600: Connection error when you try to use the Apps?

  I am trying to use the applications so that I can scan to e-mail.  When I try to open apps, I have a connection error.  I have run the wireless network test and all pass and the signal is excellent.  The eprint works very well.  I can't understand why I get a connection error when the wireless is configured and passes all the tests.  I tried scanning HP doctor thing and could not help solve it.  I'd appreciate any help.

  Thank you!!

  I had to delete web services and then add it again. Seems to work fine now. Thank you!

• always says service unavailable when you try to use the apps

  Hello

  I have a HP Photosmart 5510 and whenever I try to use the said apps try not available service later. I can't connect at all more to him.

  Alright. Press the wireless button and press 'Print report' or 'Print Info', it should print a network configuration for you page.

  After that you have, we will need to access the built-in Web server (EWS) printers. You can do this by entering the IP address of printers (from the Network Setup page) browser press and the address bar type.

  Once there, press the 'Network' tab at the top of the page. From there, you'll want to click on the button "IPv4", on the f-side of the page. It will be there for wireless and wired, so make sure you click the one for you, but you are connected. If you do not see "IPv4", you should see 'Networking', press and press "Network Address (IP).

  Then, you click the small round button next to "Manual"IP address", and then fill in the IP address, subnet mask and default gateway using the information available on the network configuration page.

  For the primary or the preferred DNS server, you will want to enter 8.8.8.8.

  For secondary school or another DNS server, you will want to write 8.8.4.4.

  Click on apply and when the message appears saying that the changes have been applied, press 'OK '.

  Press the power button on your printer, wait that it completely power off and press it again to power it on.

  Let me know if that solves your problem.

• I recently used Migration assistant to transfer to a new macbook pro and when I try to use Photoshop I get an error message telling me to download and install App Office creative cloud so I didn't and it launches the application craps out and gives the sa

  I recently used Migration assistant to transfer to a new macbook pro and when I try to use Photoshop, I get an error message telling me to download and install App Office creative cloud so I do and it begins to it out craps and gives the same message over and over.

  Hi Paul,.

  Migration wizard does not work in the case of Adobe applications.

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• I lost my iphone, but when I use app 'find my iphone', it only shows my ipad.

  When I connect to itune (apple ID), it shows 2 devices; iPad and iphone. However, when I try to use the "Find my iphone" app, it shows only my ipad ;-(

  I think that I lost on the bus, when I called customer service to inform them and told them that my phone has been turn off--I can't call. They said when the driver to perceive, it will turn off. Then, because the phone is in offline mode, that is why it does not?

  You have another way to find it, please give me some advice.

  Thank you for your help.

  < re-titled by host >

  If it is not online, it will be not traceable. If you think that it was found by the driver of the bus, go anywhere where they have their 'objects' and see if it is there.

• WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  Try to do these steps, it should help:

  1 check WhatsApp update: Open App Store from your iPhone, click on updates, check if the application needs to update.

  2. restart your iPhone: hold down the sleep/wake button to it turn off and then turn it on again.

  3. close the app: multitasking opened by double pressing the Home button, slide the nonresponse apps up to close.

  4. go in the settings, press Whatsapp, touch turn off everything except mobile and notofications data.

  5. return to the home screen and open whatsapp.

  6. go in the settings, press Whatsapp and turn back.

  7. open whatsapp again. It should work now.

• Error code: 80070424 when you try to use Microsoft Update

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  If you believe that you have done this with the same applications or applications, follow the instructions in the order, exactly...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Cleaning the components of update on your Windows XP computer

  It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you'll use the aggressive version - if requested):
  How to reset the Windows Update components?

  Reset.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.