Launch and manage processes demons/background on PlayBook

Similar Questions

• When you install windows 95, which is the executable that launches the installation process, and where it is located?

  When you install windows 95, which is the executable that launches the installation process, and where it is located?

  The file is setup.exe.  Depending on your version of Windows 95 CD, it could be in the WIN95 folder or in a subfolder of WIN95.

  If you have more Windows 95 questions, great places to get responses are microsoft.public.win95.setup and microsoft.public.win95.general.discussion newsgroups.  It is a Windows XP forum.

• What is w8edc4.exe and winyxci.exe in the Task Manager processes

  I see these two exe files in my XP Task Manager process, but Google and Bing cannot find any info on them. I guess they are some kind of virus, but am not sure.

  Sometimes, when a malware gets on your system, it will take on a name composed of a few letters and random numbers.

  If you can't find them in a search on the Internet and the suspicious look (like those that do) file names, your system probably now has or has had a malware infection.

  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Unknown device named "PCI data acquisition" and signal processing controller in Device Manager

  Greetings,

  Yesterday, my brother, who was running Windows 8.1 Overview on his Asus S400CA Ultrabook fell on a big problem of the NTFS partition corruption that made it impossible to recover through the Refresh Utility Windows 8.1. Given the situation, my brother decided it was better to go back to Windows 8, I had to install Windows 8 on their PCs by using an external DVD drive with a Windows 8 x 64 installer I already buy plenty of detail. The computer never asked me for a product key that I have read is normal in Windows 8 PC now having these embedded in the motherboard. So far an installation smoothly, but he's going to be delicate in the part of pilot facilities. Before you remove the computer I went to the Asus website and did my best to find the specific drivers for my brother's computer and downloaded the key drivers, chipset, audio, intel graphics card, bluetooth, trackpad Wireless LAN, LAN and Asus and installed. I used Device Manager to check that the drivers have been installed and which did not exist. I was able to get most of the drivers installed properly, however, said the Device Manager miss me the pilot of "Data Acquisition and Signal Processing controller PCI. Unfortunately I go to Asus website to see that if I can find the driver however, I can't do this right now.
  Check the attached screenshots for visibility...
  
  
  I also tried to use Windows Update to see if he could find the correct driver and unfortunately it's a dead-end. Because of that I write in this forum to see if someone can point me in the right direction when it comes to this missing driver (and others) indicated in the Device Manager.
  One last thing that I would ask is if I can use a utility like DriverMax to find missing drivers or should I go and install it manually?
  Thank you very much in advance for any help on this matter.
   
  Original title: cannot find drivers for Asus S400CA Ultrabook PCI

  Hi Mike,.

  Please keep us updated on the status of the issue. Please do not hesitate to answer, in case you need help with Windows in the future.

  Good,

  ASUS technical support according to my brother was a bit of a dead end, so I went to another Google search and found the culprit. I was missing the following drivers of ASUS:
  • Intel® dynamic and thermal platform frame driver
  • ASUS Wireless remote control (a driver for you to enjoy the airplane mode (Wireless) On / Off)
  The first pilot took care of the Acquisition of ICP data and Signal Processing controller and all but one of the unknown devices. Finally, the other took care of the last unknown device in Device Manager.
  I never thought that ASUS would use this a strange name for their driver because these names are extremely misleading.
  Other than that, I can finally say with certainty that the computer of my brother is back in business, and I can call this comprehensive process of restoration of Windows 8.
  Thanks for any assistance to Zaki J, I appreciate much all advice through this process!

• Creative issues cloud Installer and Manager of applications, more troubleshooting ideas?

  More troubleshooting ideas?

  Questions cloud Installer and Manager of creative applications

  
  

  CONTEXT:

  • I have a creative cloud membership.* Update

  • I need to update 2014 CC Photoshop and Adobe Photoshop CC (also for Illustrator)

  • I don't have a Manager of Application CC any longer.  My application files show the former CC app and the uninstall application alias only.   Their removal has not helped

  PROBLEM:
  What is going on?  Using a new Installer of creative cloud to get a new Application CC Manager the blue download bar starts, but breaks away. I got the download from 51 percent bar once, but now it breaks to the top immediately.

  Photo below shows the top bar of the screen of the computer with a menu drop-down empty where the creative cloud should display a list of Adobe applications.

  

  What's not?

  The talk page has suggested something that still works.

  All I can call at Adobe?  Frustrating!

  * August 2015, renewed.

  Hello

  Please, try these steps and see if it helps:

  1 force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)

  3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager )

  4 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  5. browse to the Application Support > Adobe > trash folder OOBE and AAM Updater folder so

  6. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  7. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD

  8 - go to the Apple icon > System Preferences > privacy and security > firewall > OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  9 - go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be put on ANYWHERE

  10 - Make sure of course there is no other program security Internet enabled - if it is then go ahead and launch CC app and login and check (check your extensions as well id browser it disable any toolbar security or advertising, blocking of extensions you installed them)

  Adobe 11 - run cleanup tool. > If so, select "Adobe Application Manager for Mac OS X 10.6 ' and then click on"Clean up selected. "

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  12 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

  Let us know if that helps.

  Kind regards

  BANI

• Missing PCI Data Acquisition and Signal Processing controller drivers

  Hello!

  I have a problem with my Inspiron 11 3148
  Service etiquette: CSFND32

  A few weeks ago, I did a clean reinstall of windows 8.1 using a .iso downloaded from microsoft technical support and put in level to windows 10 in a short time after.

  I don't have my thumb drive installation, where the microsoft .iso image file.

  Since then do a clean install, I had a few questions I'm going to break my best.

  1. lack of drivers for unknown devices & a PCI data acquisition and signal processing controller.

  I had some problems with wifi, so I looked in the Device Manager to check if my card needed a driver update and discovered several other device driver errors, which cannot be resolved by using windows update. The card wifi itself says it is updated.

  

  I tried to use the dell service detect downloaded applet on the page of the Dell driver IE, but it does not seem to function.

  If someone can identify what (s) I might need for these unknowns that would be fantastic.

  2. Wifi issues, perhaps in connection with the missing drivers above.

  -Sometimes does not detect networks.

  -Sometimes cannot connect to the internet when it is on my home network.

  -Is not able to connect to weak points where before he could.

  * Reset the network adapter in the network settings fixes detection and connectivity issues, but does not improve the detection of signals in weak points *.

  3. high (100-96%) HARD drive load for a few minutes after start high and very occasional errors "in areas not paginated page failure."

  -J' lived load disc high enough the last time I got the upgrade of 10 windows the first time, requiring often 5-10 minutes to settle at startup

  -Second time around, I always get high disk load, but it is not too long. The upgrade fee is very 'light', I have very few programs installed and even less to launch at startup.

  -Defects of Page seemed generally coincide with me shortly after you start using Google Chrome. I now use firefox instead and have known only one mistake so far since the permutation

  * I used the windows disk check and ran chkdsk /r for longer check disk to reboot, but both are no problem with the drive *.

  Ok... So usually after I finished writing this post, I came across a solution for the number one problem while browsing the microsoft answers forums.

  I downloaded and installed a driver for the Intel platform dynamic and thermal framework.
  -This solved my problems of missing driver.
  -J' rebooted several times and I am not also problems of wifi the day other than the problem of low task, but what I'll take it!

• Firefox won't launch and causes computer freeze.

  Last week, Firefox has refused to run and, when such an attempt is made, my computer crashes.

  More specifically, when I click on the icon to launch the program, my mouse pointer turns into a small blue circle, indicating that the program is loading, and my drive indicator light turns on. After a few seconds, my mouse pointer returns to normal, the hard drive light darkens, and I can't access all the programs, launch new Manager access to tasks or access the Start button. My only alternative is to turn the power off, and then restart the computer.

  This happens if I use the shortcut in the taskbar or navigate to the exe file and try to run from there.

  This occurs when you try to start Firefox in Mode without failure.

  This happens when loading Vista regularly and when it starts in Mode safe mode with networking.

  A scan of Malware Antibytes comes back clean, as an analysis online of TrendMicro and one from OfficeDepot (I think to pay $149 to have this problem).

  Can anyone help? I much prefer FF to IE, which I'm usin now, but I may have to switch to Chrome.

  Try to create a new profile and seeing if Firefox starts with it. Use the Profile Manager to create and delete profiles Firefox

• Laptop 15-AD129DS: installed Win7 on 15-AD129DS-lack of Driver: Acquisition of PC data and Signal Processing controller

  I recently installed Windows 7 on my laptop HP 15-AD129DS.  In the Device Manager miss me the driver for PC Data Acquisition and Signal Processing controller.   There is also an unknown device without driver right below in the section "other devices."

  I understand that this ususaly installed with drivers from the chipset.  But it didi not install in two different tests when installing Win7.  The Intel site seems to be of no assistance, or their driver utility.

  Can you lead me to the correct drivers?

  Thank you in advance,

  Mark

  Hello:

  Have you tried this driver?

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75506.exe

• HP laptop - 15-ac022ne: pci of data acquisition and signal processing controller

  I have this laptop HP - 15-ac022ne and I got windows 8, evrything has not been totally perfect until I upgraded to windows 10, wireless function no longer works, tried to install the driver and update, it was succsessfully installed in the machine to say, but still not working and PCI data acquisition and signal processing controller driver is missing tried to download the chip set on the driver support page, does not, tried to update the driver through the Device Manager and the message can not find a driver for the device of said...

  Please I need help...

  Hello:

  You need this driver for pci data acquisition and signal processing controller.

  FTP://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72069.exe

• HP laptop - 15-r247tu: need driver for PCI and Signal Processing controller HP 15 Data Acquisition - r247tu

  Can't get the driver for the Acquisition of ICP data and Signal Processing controller in my r247tu 15 HP notebook. I am using Windows 10 computer. Please help me.

  Hello:

  Try the chipset directly from Intel driver... the second file is the auto install file.

  https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-

  If this driver does not install the Acquisition of ICP data and Signal Processing controller, must install the chipset driver, download the first file listed above (zip file).

  Unzip and extract the contents in his file.

  Go to Device Manager and click on the above device needing driver.  Click the driver tab.

  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the unzipped driver folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

• HP 15-r212nv (Energy Star): acquisition of ICP data and Signal Processing controller

  There is a device in the device manager that recognizes my phone and I can't find drivers! Acquisition of ICP data and Signal Processing controller.  I searched the web, but nothing.  My laptop is HP 15-r212nv model and I'm under 64-bit Windows 10.

  Thanks in advance

  Hello:

  See if this driver works...

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71262.exe

• Laptop HP 15-ac118tu: pilot unavilable for PCI Data Acquisition and Signal Processing controller

  Hello

  I use Windows 7 Ultimate Hp Notebook model ac118tu. In Device Manager, it shows the yellow mark to the Acquisition of ICP data and Signal Processing controller (the name that appears twice).  What is the use of this controller?

  Yellow mark means that I need to install the driver for this. Please share the link to the installation of this driver.

  Secondly, I want the drivers for the webcam as well. Please share.

  Hello:

  You need the driver for this device...

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the heat of the system
  protection to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71638.exe

  For the webcam you just install this software.

  This package contains the CyberLink YouCam software for laptops models and operating systems. CyberLink YouCam is an application webcam that allows users to capture images and video from a web camera and apply visual effects for video and captured images.

  File name: sp71830.exe

• How to do task list manager process in alphabetical order

  I don't know what the * I did but I was cleaning my keyboard that gave rise to many keys in presses and when I opened the Task Manager processes were no longer in alphabetical order, they appear from Z to A. How can I fix it? I searched on the net for a solution, but came away empty-handed. Something I've done done go haywire.

  [Moved from comments]

  Click on where it says Image name.

  In most of the lists like that in Windows, clicking on a column header will sort the list in this column. Clicking again will reverse the sort order.

• .bar and signature process file

  Hello world

  I recently started to develop for the BB playbook. I have already created my app on flash builder 4.5 and it works perfectly on the playbook Simulator. Now my question is how can I get the .bar file that I need to submit to the supplier portal?

  Also I really don't understand how this process of signature works. What I mean is that I don't know what to do after I get the LSB file?

  I apologize if my questions seem stupid, but I would appreciate an answer, because I'm really excited about the development for the playbook.

  Thank you.

  Greetings:

  Question is not stupid, but they have been asked before.  As recent as a few minutes ago.  See this thread to go.

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-AIR/app-is-ready-now-what/TD-p/825289

  It is best to search the forum before posting a question.  9 times out of 10 the answer to your question already exists.

• Adding and managing printing in ePrint Center applications

  Here is a video on add and manage applications print using ePrint Center (EPC).   He lead one through the process of access to the EPC, adding apps and how to remove an unwanted application. It will also show a way to learn more about an app before you add the application to the printer. The video will also show you how to rearrange the order of the applications on the screen of the printer.

  I hope that the community find this video useful.