Launch Global event listener when auto start MyApp
What I was trying to do:
MyApp has an alternative entry point and the graphical user interface.
access to choice, I wanto save a folderlistener that triggers a global event to trigger an email sending process.
so far, I've only had the entire process running only if I join the global event listener in the GUI part, it means when myapp GUI stood then go global Stanley knitted.
but I want Global event listener remains all the time, how can I do this?
I did some research in this Ant but just couldn't understand it
any responses appreciated.
my code:
============================================
SerializableAttribute public class MyApp extends UiApplication implements FieldChangeListener, GlobalEventListener
{
Public Shared Sub main (String [] args) throws AddressException, ClassNotFoundException
{
MyApp PAP;
If (args! = null & args.length > 0) {}
{If (args.length > 0 & {args [0].equals("Auto-MyApp")})}
Entered another application by the entry point.
Turn on folderlistener at startup.
FolderListenerApp.waitForSingleton ();
}
else {}
PAP = new MyApp();
theApp.enterEventDispatcher ();
}
}
private void AddGlobalEvent() {}
addGlobalEventListener ((GlobalEventListener) this);
}
Public MyApp() throws AddressException, ClassNotFoundException
{
........
AddGlobalEvent();
........
}
' Public Sub eventOccurred (guid long data0 int, int data1, the object object0,)
Object1 object) {}
Logger.logEventError ("in eventOccurred...");
Is it the GlobalEvent we expect?
If (guid is 0xa4c7e78a6c3fe109L)
{
Yes.
FolderListenerAction f = new FolderListenerAction();
New Thread (fa) m:System.NET.HttpListener.start ();
}
}
}
==================================
Check out this tutorial that I posted earlier, it shows an application that is divided into a background process (extends the Application and begins when the operating system starts) and a process of foregroud/AC (extends UiApplication).
Both are implementing GlobalEventListener and use it to talk with them
Scroll down to the post on that date "2010-06-19 23:22"to the GET, the corrected version of the code.
Tags: BlackBerry Developers
Similar Questions
-
How to remove the event listener when all the MoviClip are out of the scene
I am newbie to as3,
I created the animation using as3 in which duplicate the circle ten times, then push in a table and giving random motion. When the double object goes outside of the scene so I should remove the event listener. But now when a duplicate object is going off the stage the event listener is removed. Thanks in advance
use:
-code to create the bubble random movement.
var bubbleNo:Number = 10;
var vx:Number is. 3;
var vy:Number is. 5;
bubbles var: Array = new Array();
var bubbleRadius:Number = 9;
var myColor:ColorTransform = this.transform.colorTransform;
init();
function init (): void {}
for (var i: Number = 0; i
bubble of var = new newBall();
Bubble.x = Math.Random () * stage.stageWidth;
Bubble.y = Math.Random () * stage.stageHeight;
Bubbles.push (Bubble);
myColor.color = Math.Random () * 0xFFFFFF
bubble.transform.colorTransform = myColor;
addChild (bubble);
}
addEventListener (Event.ENTER_FRAME, createBubble);
}
function createBubble(event:Event):void {}
//
for (var k: Number = bubbles.length - 1; k > 0; k-) {}
var bubble = bubble [k];
Bubble.x += vx;
Bubble.y += vy;
If (bubble.x - 18 > stage.stageWidth | bubble.x + 18 < 0 ="" ||="" bubble.y="" -="" 18=""> stage.stageHeight | bubble.y + 18)<>
removeChild (bubble);
Bubbles.splice (k, 1);
}
}
if(Bubbles.Length == 0) {}
removeBubble();
}
}
function removeBubble (): void {}
removeEventListener (Event.ENTER_FRAME, createBubble);
}
-
Hi all
I have a question about the GlobalEventListener that may seem a little silly. First of all let me enumerate what I have:
JDE 4.7.0.41
BlackBerry Storm.
The event capture works perfectly fine in my code. So my question is how the content of "obj0 & obj1" in the eventOccurred method?
The eventOccurred seems to fire multiple times for the same event ID, so I wanted to check the content of the obj0 & obj1 for more details.
Thank you much in advance.
Here's the complete code. Please note that the GUID_TIMEZONE_CHANGEDis used as an example.
' public void eventOccurred (long guid, int, int data1, Object obj0, Object obj1 data0)
{
String gid = Long.toString (guid) .trim ();
If (gid is net .rim .device .api .util .DateTimeUtilities .GUID_TIMEZONE_CHANGED)
{
Dialog.Alert ("GUID =" + gid + "-Object0 =" + obj0.toString () + "-Object1 ="+ obj1.toString () ');}
}Sean.
for events that you do not send yourself, you can determine the class of the argument by calling getClass(). If it is an accessible class you can cast the object itself and use it as it seems appropriate. Some events will probably use internal classes, you cannot access those.
-
Toshiba 32L 4363: missing DLNA + video auto-start
Hello
I have some problems with my new Toshiba 32L 4363.
As I have read on the homepage L 32, 4363 should support DLNA, but I can't find the function.
Where can I find it?There are a few pages where I see a lot of applications to play videos, pages like YouTube.
The problem is that some of these apps are starting to play even if I hadn't started the app apps start automatically. How can I disable this?Videos from a USB USB also begins to play when I chose the videos in a small windows on the right side, but did not press on enter on the remote control.
I don't like this feature. How can I disable it?In the manual (also the web - the toshiba manual - om .net) I couldn't find anything about it.
mellimelli
According to the specifications of the TV, the device is DLNA certified.
This means that you can share movies, videos, music and photos on your TV Toshiba or with DLNA using a DLNA certified media server on your network home.I recommend checking the manual start of the user to page 45
The TV can be configured as a digital media renderer (DMR).
When using as a media converter, the TV displays content provided by a multimedia server.
The media selection is made by the media controller.
The TV can play photo, movie, or audio files when using as a Media Converter.
In the network menu, select Network Device Setup and press OK.
Select Media Renderer and press b to select on.
If demand media controller, prompt and the function of Media Converter will start.According to the USB Autostart support: what is mentioned on page 61
When Auto-start is enabled, you will be asked if you want to start the media player each time that a
Peripheral USB is inserted. If autostart is disabled (or if you want to connect to a media server on the network), you must manually start the Media Player menu.To change the auto-start setting: highlight the Options icon and then select Configuration of Media Player
and press OK. Select USB Auto Start, and then press OK. You can then select enabled or disabled.Start_ sent
Insert a USB device into the USB port on the left side of the TV. A prompt is displayed. Select Yes, then press OK. Videos, music or Photos and click OK. Then select devices and press OK.* NOTE: * If autostart is set to Off, you can manually start the media player.
-
Need help to configure Auto-start for the database
Hello
DB version: 11.2
OS: RHEL 5
Please help me
I want to configure the database and listener in auto-start during the startup process of the operating system.
ConcerningStep 1 of the oracle user
CD $ORACLE_HOME/bin
VI dbstart
VI dbshutchanged the
LISTENER_ORACLE_HOME = $1
TO
LISTENER_ORACLE_HOME = $ORACLE_HOME
Step-2 of the root user
VI /etc/init.d/dbora
#! / bin/sh
Oracle # these scripts runs the listner and Oracle database server.
#
# chkconfig: 345 81 81
Description #: this is the Oracle
## Define ORA_HOME as equivalent to the ORACLE_HOME
# from which you want to run dbstart and
# dbshut
# the value ORA_OWNER to the userid of the owner of the
# Oracle in ORA_HOME ServerORACLE_HOME=/U01/app/Oracle/product/10.2.0/Db_1
ORA_OWNER = oracleIf [! f $ORACLE_HOME/bin/dbstart]
then
echo "Oracle startup: cannot start.
Output 1
FIcase '$1' in
'Start')# Run Oracle databases:
# The following command assumes that the oracle connection will encourage not the
user # all valuesknown - $ORA_OWNER - c "start ORACLE_HOME/bin/lsnrctl $".
Su - $ORA_OWNER-c "$ORACLE_HOME/bin/dbstart.
;;
'stop')# Stop the Oracle databases:
# The following command assumes that the oracle connection will encourage not the
user # all valuesknown - $ORA_OWNER - c "judgment of $ORACLE_HOME/bin/lsnrctl.
Su - $ORA_OWNER-c "$ORACLE_HOME/bin/dbshut.
;;
ESACExit 0
Note: Please check your ORACLE_HOME
Step-3 of the root user
chmod 755 released
chkconfig released onVI/etc/oratab
ORCL:/U01/app/Oracle/product/10.2.0/Db_1:YStep 4 Test the automatic start of the root user
stop /etc/init.d/Dbora
stop /etc/init.d/DboraOr
Restart the server
You can also view
http://www.Oracle-base.com/articles/Linux/automating-database-startup-and-shutdown-on-Linux.php
http://docs.Oracle.com/CD/E11882_01/server.112/e10839/strt_stp.htm#BABGDGHF -
Global keyboard event listener?
Is it possible to create a global keyboard event listener that is unrelated to a window, button, or other user interface element? The best I could get to add the event to the window listener. This only works if the window is active. If the user clicks outside the window and then the receiver for the keyboard does not work. In addition, when the dialog box appears first of all, it won't work until after the user has made some type of interaction with the window. I want is to have keyboard shortcuts for users that work regardless of the place where they clicked on the screen, even if the dialogue window is not 'active'. Is this possible?
Here is the code I use to the receiver of keyboard for the window.
mywindow.addEventListener ("keydown", function (k) {keyListen(k)}); function keyListen(k){if(k.keyName=="Z"){alert("Do stuff here");}}
I don't think that you can create listeners of world events, as for the first appearance of the dialog box, I solved this problem in my script: scripts buliarca BCM_ExtendShortcuts UI by a button activates the event listener to this button. A problem with attach listeners to window, it's in CC2015 events can only be attached to controls and not windows. Setting for windows works in CS6...
-
All,
I'm pragmatic disabling most of the façade with a particular event. This freeze happened when I launched this event and then stopped the program in the middle of the event. While the program has been frozen at all times no matter how many times I turned on my computer and turned off and restarted labview. I tried with pragmatism, allowing some of these objects on the front façade of the loop of events without result. What else could it be? When I select the program stops at the structure of the event and is waiting for him. When I have a finite number of thread for the time terminal timeout the timeout event runs and then waits for the structure of the event and I'm still not allowed to do anything.
Aaron
Yenkip,
OK, the moral of the story when programmatically disabling an object to front panel make sure you have the code that allows very early in the program, changing constantly in the middle of the program changes its active status. I tried enabling some of these objects, but not all. When I tried allowing each of them, I realized that everything in the deactivation of the tab control tab control disables not only the ability to change the tab control. IT WASN'T THE STRUCTURE OF THE EVENT. The guys help OR on the phone told me that the structure of the event was obviously the question. I'm fine now.
Thank you
Aaron
-
are there ways to make winXP auto detect and pair up headset/bluetooth headset when you start?
Hi tang kok Wee,
· What is the service pack installed on the computer?
You can see the below mentioned Microsoft Knowledge Base artcle and follow the steps. The next time you connect the device to bluetooth headset, it will be found automaticlly.
How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2
http://support.Microsoft.com/kb/883258
Let us know if that helps.
-
When I start XP, Windows Installer wants to launch Sonic Module of Activation
When I start it up, Windows Installer wants to launch Sonic Module of Activation... it stalls when it tells me to install the CD (which I did not)... Then I must cancel at least six times before I can use my computer... what gives? How can I get rid of this?
* original title - how can I get rid of the sound Activation Module at startup? *
Download Autoruns from Microsoft:
Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902 >
Run the program. It will give you a list of everything that is running when you upgrade Windows. Start with the 'Connection' tab and see if you can find any startup item that corresponds to your Sonic Activation error. Then simply uncheck the box in front of him and put an end to the program.
HTH,
JW -
I am under Windows Vista Home and when I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work. I'm afraid that something is not correct, what do you recommend? The two available Service Packs have been installed.
Discussions were merged.
Deleted duplicate.
Original title: failure of the Dll
The error seems to be a common problem with Dell laptops:
It seems that apoint.exe gives the error that indicates that the problem is with the Alps touchpad driver.
Try to uninstall the Alps touchpad driver and then install the latest version available from Dell for your laptop:
http://www.Dell.com/support/home/ca/en/cabsdt1/product-support/product/Inspiron-1545/drivers
-
event listener for when the Panel is open?
is there an event listener for when a CEP Panel is open.
I have a persistent Panel the onload works only when the Panel is opened for the first time. I want to keep persistent, but I want to know when the Panel is open again
Maybe I've misunderstood something, because my English is bad. Unfortunately the listener for events at the opening of the Panel, I also have not found, I had to go through the back door.
-
When I start the listener, I get the following "status UNKNOWN"...
Oracle 11g R1 on Oracle Enterprise Linux
Here is the configuration of my listner
**********************************************************************
[oracle@oracle-test admin] $ cat listener.ora
listener.ora # Network Configuration file: /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME=/u01/app/oracle/product/11.1.0/db_1)
(= Extproc PROGRAM)
)
(SID_DESC =
(GLOBAL_DBNAME = orcl.o - test.mydomain.name)
(ORACLE_HOME = u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = orcl)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xx.xx.xx) (PORT = 1521))
)
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
)
)
*************************************************************************
When I start the listener, I get the following messages of "Status UNKNOWN".
Why?
[oracle@oracle-test bin] $. / lsnrctl start
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on February 19, 2010 11:22:04
Copyright (c) 1991, 2007, Oracle. All rights reserved.
From /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: Please wait...
TNSLSNR for Linux: Version 11.1.0.6.0 - Production
System settings file is /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/11.1.0/db_1/log/diag/tnslsnr/oracle-test/listener/alert/log.xml
Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=xxx.xx.xx.xx) (PORT = 1521)))
Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=xxx.xx.xx.xx) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start date February 19, 2010 11:22:04
Uptime 0 days 0 h 0 min 0 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/product/11.1.0/Db_1/log/diag/tnslsnr/Oracle-test/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=xxx.xx.xx.xx) (PORT = 1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
Summary of services...
Service 'PLSExtProc' has 1 instance (s).
Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
Service "orcl.o - test.mydomain.name" has 1 match (s).
Instance "orcl", status UNKNOWN, has 1 operation for this service...
The command completed successfullyThere is nothing to worry about it. UNKNOWN means, the listener knows the orcl SID because of the list of SIDS. This is called static record. If your instance orcl's up, PMON dynamically registers the listener (if you are using port 1521 without additional configuration), which leads to a READY State.
Kind regards
Uwehttp://uhesse.WordPress.com
-
There must be a file somewhere in Thunderbird for all of your communications by e-mail that stores the e-mail addresses of everyone. When you start typing an address you will display a list of people with whom you communicated with in the past. Many of these people are not in your contact/address file. I want to somehow extract this file to Thunderbird.
You have two default address books. The personal book where you add contacts and the collected book which keeps information for messages that you send.
So you're looking for the collected address book.
When you open the address book window, you should have your books listed as folders on the left margin in the directory pane. If the pane is not displayed, select View-Layout and click on. -
Want 700-270-d: hp envy 700-270d auto start when receipt main decision-making power
What power on the main power of the auto-start System. Suspected of failure of the power supply.
try to connect try UPS, even once that the power received ups automatic system power on. Try Apr always the same question. If the direct plug to the ankle once the switch from the wall on it also turns auto-start without pressing the power on button on the desktop.
Hello
If I understand the BIOS setting to 'RESUME on AC Pwr' or similar expressions is selected.
There are BIOS Wake on Lan, USB etc keyboard options and with Dells to happen on every day at the same time.
It is a BIOS setting that you need to change.
If in doubt please ask.
-
Error: When you start the listener
HIII..,.
I can't start my interlocutor, to try to stat the following error which is,
*[Oracle@msftrac2 ABC_msftrac2] $ lsnrctl start ABC *.
LSNRCTL for Linux: release 10.2.0.3.0 - Production on October 17, 2011 11:35:16
Copyright (c) 1991, 2006, Oracle. All rights reserved.
From /u02/oracle/ABC/db/tech_st/10.2.0/bin/tnslsnr: Please wait...
TNSLSNR for Linux: release 10.2.0.3.0 - Production
System settings file is /u02/oracle/ABC/db/tech_st/10.2.0/network/admin/ABC_msftrac2/listener.ora
Log messages written to /u02/oracle/ABC/db/tech_st/10.2.0/network/admin/abc.log
Error listening on: (ADDRESS = (PROTOCOL = ipc)(PARTIAL=yes) (QUEUESIZE = 1))
Is no longer listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=msftrac2.msftpnq.com) (PORT = 1521)))
TNS-12546: TNS:permission refused
AMT-12560: TNS:protocol adapter error
AMT-00516: permission denied
Linux error: 13: permission denied
Listening port could start. See the above error messages...
Can someone help me on this problem to solve...
Thanks in advance...Hello
What is the result of$ls - he's $ORACLE_HOME/bin/oracle
$ls - he's $ORACLE_HOME/bin/tnslsnrAlso, please make sure that you run the command
# chmod 01777 /var/tmp/.oracle
Thank you
Maybe you are looking for
-
Remove the admin account el capitan
I want to delete a temporary admin account I created to solve a security issue on my main admin account. In short, I want to delete one of the two accounts of user admin my operating system is the latest version of El Capitan.
-
Windows Update does not end: "check updates".
Today & yesterday I tried to run Windows Update on my 2 computers Win7 (64 bit), a desktop computer (as a HTPC) one and the other a laptop ASUS. Other software (Adobe, Skype, etc.) on these 2 p. Update OK. These 2 PC updated successfully at the begin
-
BlackBerry Smartphones unable to download Blackberry Protect
I have a Curve 8900 running 5.00.900. When I try to download BB Protect, I get "please wait" and that's all. This application cannot be downloaded to a computer for the transfer. Any ideas? Thanks for your help. Mark
-
After doing a system restore, I'm now get "NTLDR IS COMPRESSED" press Ctrl-alt-delete... and same error comes back. How can I delete?
-
fast media player before failure
For some reason any my fast forward and rewind my Windows Media Player has ceased to be available to use. Why can be? What has changed? No other programs have been installed. The fast forward/backward has simply ceased to be available. Appreciate any