launch of photoshop cc has module loading errors
I get the same or similar problem like this post (
and the answer provided is not correct because I have not installed the plug-ins old it has been published since I installed the last CC updated 2 days ago. Can someone do the light on this issue and how it can be fixed?The messages are:
"Could not load the module FastCore Routines because it does not work with this version of Photoshop."
"Could not load the module MMXCore Routines because it does not work with this version of Photoshop."
"Cannot load the multiprocessor support plug-in because it does not work with this version of Photoshop."
Thank you.
Glad it worked Samuel!
The logs indicate a prior update failure. Reinstall the question resolved user.
Concerning
Nathalie
Tags: Photoshop
Similar Questions
-
What should I do now that Photoshop CC has encountered an error trying to upgrade. Suggesting to try again does nothing. (49) numbers, but I don't know what that indicates. Help?
It is recommended that I ask for help, who put me here. What I really need, is a customer - not a chat room service!
Thanks for your time. Finally, I just uninstalled Photoshop CC and then re-installed. But, once again, thank you!
-
Adobe Photoshop Lightroom has stopped working error
Updated to the latest version of CC - everything worked as expected for a couple of days - earlier this afternoon LR began (and continues) to plant. "Adobe Photoshop Lightroom has stopped working" error - I followed different bits of support instructions - uninstall - reinstall - signature and return - downloaded and committed "Adobe Creative Suite Cleaner Tool" - now, a few hours later, the problem has not been resolved - I need to go back to my project. Unfortunately, I even followed the thread that requested to uninstall the previous 5.7.1 version.
Please help asap - Kassa cordially
You don't did us not all the details to help you.
Just out of curiosity, what happens if you disable GPU usage in the 'performance' of the Preferences dialog box tab?
-
I try to use the software provided with an external hard drive and cannot launch the it, I get an error launch. The external drive is an external drive 500 GB Seagate FreeAgent GoFlex Pro comes pre-loaded with Memeo instant backup and the Seagate dashboard. I could connect the HDD and install programs, but when I try to open them I get «dashboard of Memeo Launcher has stopped working...» Windows is checking for a solution to the problem... "and then nothing. I contacted Toshiba (the laptop manufacturer), Seagate and now I want to know if anyone here can help you. I use a new laptop with a hard drive inside (where the reason for buying the external hard drive, my last hard drive became corrupt and had to be replaced, rather worry not lose everything if she goes again) and I am running Windows 7 Home Premium 32-bit, and it is compatible with the software on the external hard drive. When I tried to fix the problem with the Seagate tech support, I encountered the error "MMC has detected an error in a snap and it will unload" and I can report the problem/close MMC or "unload the snap and keep it running". When I select this option (which it is by default), I get the following:
Unhandled exception in Managed Code snapFX: {c7b8fb07-bfe1-4c2e-9217-7a69a95bbac4}An exception was thrown by the target of a call.Exception type:System.Reflection.TargetInvocationExceptionException stack trace:at System.RuntimeTypeHandle.CreateInstance (RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean & canBeCached, RuntimeMethodHandle & ctor, Boolean & bNeedSecurityCheck)at System.RuntimeType.CreateInstanceSlow (Boolean publicOnly, Boolean fillCache)at System.RuntimeType.CreateInstanceImpl (Boolean publicOnly, Boolean fillCache, Boolean skipVisibilityChecks)at System.Activator.CreateInstance (Type type, nonPublic Boolean)at System.RuntimeType.CreateInstanceImpl (BindingFlags bindingAttr, Binder binder, Object [] args, CultureInfo culture, Object [] activationAttributes)at System.Activator.CreateInstance (Type type, BindingFlags bindingAttr, Binder binder, Object [] args, CultureInfo culture, Object [] activationAttributes)at System.Activator.CreateInstance (String assemblyName, String typeName, Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object [] args, CultureInfo culture, object [] activationAttributes, evidence securityInfo, StackCrawlMark & stackMark)at System.Activator.CreateInstance (String assemblyName, String typeName)at System.AppDomain.CreateInstance (String assemblyName, String typeName)at System.AppDomain.CreateInstanceAndUnwrap (String assemblyName, String typeName)at Microsoft.ManagementConsole.Internal.SnapInClient.CreateSnapIn (String assemblyName, String typeName)at Microsoft.ManagementConsole.Internal.ClassLibraryServices.Microsoft.ManagementConsole.Internal.IClassLibraryServices.CreateSnapIn (String assemblyName, String typeName)at Microsoft.ManagementConsole.Executive.SnapInInitializationOperation.OnStart)at Microsoft.ManagementConsole.Executive.Operation.Start)to Microsoft.ManagementConsole.Executive.RunningOperationsTable.EnqueueOperation (operation)to Microsoft.ManagementConsole.Executive.NamespaceExtensionComponentData.GetScopeNodeForExpand (IDataObject dataObject, IntPtr hScopeItem)to Microsoft.ManagementConsole.Executive.ComponentData.OnExpandSync (IDataObject dataObject, IntPtr hScopeItem)at Microsoft.ManagementConsole.Executive.ExpandSyncMmcNotification.OnNotify (IntPtr dataObject, arg, IntPtr, IntPtr param)at Microsoft.ManagementConsole.Executive.MmcNotifyTarget.Notify (IntPtr dataObject, eventType NotificationType, arg, IntPtr, IntPtr param)at Microsoft.ManagementConsole.Executive.ComponentData.Notify (IntPtr dataObject, eventType NotificationType, arg, IntPtr, IntPtr param)I tried to find a solution online, but the Microsoft Fix - it tool does not work on my operating system. I also tried that fix environmental variable of all WAY and also has not worked. I can't believe that there is no solution to this problem available and I can't imagine why Microsoft made a patch available for only PART of its operating system.Can anyone help? I can probably use the external drive without the software, but for those who want to manually move the files to back up, and on the other hand, it beats paying more money for a better player with preloaded software, if you do not use the software. And because it came with the software loaded on it, going back to the retail store is not an option.Someone at - it some light on this would be really appreciated. I won't have one problem throwing another thing - just the software for the external drive. I already have the uninstall/reinstall the software thing fact, several times, and she even got to have to perform a system restore and uninstall it again. Also reformatted the external hard drive & reinstalled. No luck.Hello
· How is Windows reinstalled on the new hard drive internal?
· You are able to install other software?
I suggest that you create the new user account and check if the current profile is corrupted and try to install the software and check if the problem persists, proceed in the link below:
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
-
my photoshop won't load, error message 148.3
my photoshop does not load, error message is 148.3
It is a license error. The usual solution is to reinstall the program after running the Creative Suite cleanup tool. Read also:
Error "Licensing has stopped working". Windows
Error "Licensing has stopped working". Mac OS
If you can't fix it, you will need to provide more information such as the specifications of the system and what version of PS you actually use...
Mylenium
-
Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »
Perhaps the reason for the problem of synchronization is the problem with the loading of google map?
Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »
Apple has not renewed the contract with Google to access Google servers.
If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging. Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.
There is more support for iPhoto from Apple. You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.
Perhaps the reason for the problem of synchronization is the problem with the loading of google map?
It is very likely. If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.
-
Windows XP Service Pack 3 error "Windows has no load installer for hdc.
service pack 3 Windows could not load the installer for hdc
having problems installing SP3, error message "windows has no load installer for hdc.
Hi Doug,.
See the following article to find out how to install Windows XP Service Pack 3.
Steps to take before you install Windows XP Service Pack 3
See also:
How to troubleshoot an installation fails on Windows XP Service Pack 3
-
Original title:
ReplSync.dll - error loading DLL cannot load resource dll: REPLRES. RLL the specified module could not be found
I get this error message whenever I start my computer: replsync.dll - DLL Load error can not load the resource dll: REPLRES. RLL specified module is not found Help please? Thank you!
HelloYou did changes to the computer before the show?Method 1:Step 1:
You can try to start in safe mode and check if the problem persists.The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.
Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.
Advanced startup options
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Step 2:If the problem does not occur in safe mode, and then try to perform the clean boot and see if the problem still occurs. Clean boot helps eliminate software conflicts. For more information, see the following link:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the article mentioned above.
Method 2:
You can run Windows Defender Offline tool.See the following link for more information about the same:
What is Windows Defender in offline mode?
Windows Defender Offline: Frequently asked questions
Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.Method 3:
Try the SFC (System File Checker) scan on the computer.SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.
Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.
Reference:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833Let us know if it helps!
-
I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?
Hello
Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.
Hope that helps!
Kind regards
Sheena
-
Whenever I try to launch my 6 Lightroom, it says there "has encountered an error in its cache of the preview reading and needs to stop smoking". How can I fix?
Hi aubreyfrances,
Seems that your preview cache has become corrupted.
You must go to the same place where your catalog is stored and get rid of Previews.lrdata (not .lrcat) file
Then, launch Lightroom and check.
-
I just went to run photoshop and I got an error message that my license has expired. I bought this program (although there is a long time), but is supposed to expire?
Hi sharonp3923897,
The license does not expire. You may be able to correct the problem by following the troubleshooting steps in the following document: error "licensing for this product has expired". CS4, CS5.
If you continue to receive an error message, please post a response to this discussion. Let us know your operating system and the version of Photoshop you use so that we can better help you.
Best,
Del
-
Error d host. Megaraid_sas module loading.
Hello to all,
Ho da poco spento e gradually a cluster vsphere essential kit more e ora mi ritrovo con uno dei 2 nodi in error.
Nel dettaglio ho No. noticed che sul vcenter he nodo 2 risultava disconnesso, quindi mi sono is con monitor al nodo Alto schermata una of ed actually was proposed (hoist screenshot).
Ho quindi tried a riavviare he e nodo come risultato ho schermata di d fissa knew "loading module megaraid_sas '.
Internet con Aiutandomi ho visto che he problema "Megaraid_sas module loading" Può essere solved abilitando the UEFI (font https://www.youtube.com/watch?v=e6Kkr-Ba3rU ) terms.
2 Ho che mi fermano doubt e che I would share con voi
nodi da 2 of cluster 1 - it e composto. The terms going to both the macchine su attivata?
2 - fino ad oggi (1 anno di attività e 3 spengimenti e riaccensioni) it not so e presented e UEFI era problema no attivata. Altre soluzioni conoscete?
Grazie in pre-empted by it vostro aiuto,.
Saluti
In theory the information di configurazione del tuo raid Google risiedere sui brain substitutes, forward-looking dal Comptroller che use Server he tuo.
The sostituzione dovresti reimportare the dai brain configurazione dopo (not e q automático)
Killed her licenza non offers the Host ti quindi profile devi riconfigurare the host a mano in caso di reinstallazione da zero.
UN trucco Può essere quello di seeing the su licenza assessment (in questo modo abiliti all di vsphere features), host of ti crei UN profile partendo dall'host adapter ancora e lo applichi al nuovo host later.
The operation riattivi licenza corretta completata.
Saluti
-
Anybody out there can help get LR works again.
Open LR 5 I see message "Lightroom has encountered an error in its cache of the preview reading and needs to stop smoking". I deleted the folder Preview Cache completely (saved). This does not solve the problem. What can I do next to load Lightroom?
If you remove the preview cache folder and the problem persists, then most likely you have found the wrong preview cache (it's for a different catalog previews) and you must find the right cache overview. You should use the search function of your operating system to find all files whose name ends with Previews.LRDATA and remove each of them until you can open your Lightroom Catalog.
-
Have a problem... not loaded project. work on it for 8 months. has never been anything like this with him or other projects. When you load a project first generates an error. {The first pro has encountered an error [f:\ppro603_Win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe/k]} Create the project for automatic registration of Eve also unloaded. When I sav the project for the last time on the pro first warned me about all the problems and save projects without any problems. It's one thing was unusual in the program - the timeline when switching between sikventsy constantly dropped as parameters to the user. And as usual. I tried to load the project from another computer. Import the project in after Effects. import the project into a new project on pro first. But it does not solve the problem. the error all the time. Please help, a lot of work in this project. This is a great betrayal of the premier pro...
Hi Pochtawood,
Yes, uninstall iCloud will allow you to create new projects.
For existing projects, you can repair them with a patch created by a user.
Details and links to the patch are here: Re: Debug f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe event
Thank you
Kevin
-
PSE - 11 on computer given to nine (w-7) Impossible to load her get message "the installation process has encountered an error so that during the installation of the shared technologies. Please restart your system and try again". Done it several times and still the same message. How to install correctly?
Thanks in advance.
Maybe you are looking for
-
Could not open the spare have compact &; rebuilt all the .msf SOLVED caused by Zindus
TB 25.5 on Windows 7 the profile is 12.5 G dates back to 2002. Return often, but... When I click on any accessory a small widow appears to maybe 1 tenth of a second or less and disappears. Cannot read anything on this subject. Compacted, saved, delet
-
Hi all I wish I had the Virus to access as a synth plug-in, like Alchemy, Sculpture etc. I tried to get him, but find only interfaces with the AccessT1 hardware synths, snow and so on. Is this even exist? VST plug-ins, to THE? Someone knows where to
-
Satellite Pro A10 - upgrade RAM
Hello I have an A10 with 512 MB DDR PC2100 CL2.5 Satellite Pro (266) and want to upgrade to 1024Mo with two sticks of 512 MB. The scanner memory Crucial sites says I can do it and PC2700 (333) too. I bought the package and install, it worked for a da
-
HP ENVY 5644: How to find the password to be able to print from the iPad or a laptop?
I configured the printer some time ago, but now my husband wants to print from his Mac laptop and requires the password that I do not have. How can I find out what the password please?
-
Only able to hear the sound with headphones
I am only able to hear the audio with headphones. Hello for some reason, I am only able to hear the sound of my laptop through my headphones. When I take the headphones on the speakers does not work! Help, please. This sux