Similar Questions

• How to deploy the web service PAPI

  I am new to OBPM.
  I use BPM studio 10.3 to create processes.
  I set the preferences of the engine "from PAPI web services." This works.
  But I do not know how to deploy them to web services PAPI since the BPM web service console shows that no service is deployed.
  
  Please tell me how to deploy BPM processes.
  
  Thank you very much
  
  Published by: YE on March 27, 2009 09:58

  To expose processes that Webservice, please follow the steps below.
  Just click on process--> select process Webservice then it will open a new window, and then specify the name of the corresponding input parameter Web service method.

  Then build the application and test the service by clicking on the icon LaunchDeployedWebServiceswebapp in Eclipse, it will open the new window, it contains information about Web service, URL endpoint to access the WSDL Style HTTP WS, WS-Security authentication basic authentication.

  Thank you best regards &,.
  M.Kumaraswamy.

• Error ODI (10.1.3.6) launches the Web Service of HPL

  I do turn a question with ODI version 10.1.3.6 when we pull data from BSE and then try to push planning. Everything works fine until it will launch the HPL webservice, ODI throws an error:

  "Error in the launch HPL Web Service

  "com.sunopsis.wsinvocation.SnpsWSInvocationException: java.lang.NullPointerException.

  The null pointer would seem to indicate that a value is missing, but I don't know where to look. Anyone have any ideas on how to increase the logging level or where I could find an answer?

  Thank you!

  Thank you, we are in fact on 11.1.2.1.0 so that doesn't apply to my version, but we found the problem. After you run the epmsys_registry.sh tool, we found that the jdbc url for ERPi had changed to /SID from: SID meaning that he was looking for a service, not a SID. Don't know how it happened elsewhere, but after re - run the configtool.sh was all indented properly.

  Thank you very much, if. I appreciate the comments.

• How to call the web service?

  Hello

  I want to know how to call the web service from my application HTML5 & javascript.

  Please help me find this detail as what I can access easily. and I want to access web services online (a method of it) I'm not concered with how background Web service takes place.

  I just want that when you call a web service method, I will return the result.

  Please try this out for a WebService call

  var xmlhttp;
  xmlhttp = new XMLHttpRequest();
  xmlhttp.open("get","your url",true);
  xmlhttp.setRequestHeader("Accept","application/json");
  xmlhttp.setRequestHeader("Content-type", "application/json");
  xmlhttp.onreadystatechange=function() {
   if (xmlhttp.readyState==4) {
    if (xmlhttp.status == 200) {
      console.log(xmlhttp.responseText);
    }
   }
  }
  xmlhttp.send();
  

  This will display the result of the invocation of webservice. The url is the application that you deploy and the type can be get/post. If xmlhttp.send (post) takes argument for the display of the data. You can call it by clicking a button in HTML.

• By using the web service ActionsService to load the account data

  Hello

  We are looking to automate the loading data of an EPM - HFM Application accounts.

  We wre able to charge through the front-end server. About Automation, we were able to configure GOSA strategies for the web service, create the native user in console weblogic and import and use the public key of client web service proxy.

  The URL of the wsdl file that we ask is http://192.168.50.21:7363 / oracle-EMP-fm-Web services/ActionsService? wsdl

  The method we are trying to call is iActionsService.loadData ("clustername", "name the Application", "E:\\testpad\\Hyperion\\data\\DATA.txt", null, ",", DataLoadMode.MERGE, false, false);

  The errors below are found in the file log immediately after the race. Please help us find what needs to be done in the setting of these errors. Are we sending the right params to the web service?

  Do we still need to make other changes to weblogic/em to make this work? Please suggest.

  Oracle EPM-edition of Fusion

  version - 11.1.2.4.0.79

  Thank you and best regards,

  Guna

  Newspapers, we find that

  We might be able to connect to the application - Session is created with the Session id: 5e95de6f-e828-4121-8765-36c186e72355

  An unexpected error has occurred-

  oracle.epm.fm.common.exception.HFMException: EPMHFM-65536: an unexpected error has occurred.

  at oracle.epm.fm.common.exception.ExceptionHelper.handleException(ExceptionHelper.java:45)

  at oracle.epm.fm.domainobject.loadextract.LoadExtractOM.loadData(LoadExtractOM.java:281)

  Error EPMHFM-65925

  java.lang.NullPointerException

  at org.apache.thrift.protocol.TCompactProtocol.writeString(TCompactProtocol.java:325)

  at oracle.epm.fm.thrift.protocol.TMultiplexedProtocol.writeString(TMultiplexedProtocol.java:112)

  to oracle.epm.fm.common.service.loadextract.LoadExtractHandlerService$ loadData_args$ loadData_argsStandardScheme.write(LoadExtractHandlerService.java:10236)

  to oracle.epm.fm.common.service.loadextract.LoadExtractHandlerService$ loadData_args$ loadData_argsStandardScheme.write(LoadExtractHandlerService.java:10152)

  to oracle.epm.fm.common.service.loadextract.LoadExtractHandlerService$ loadData_args.write(LoadExtractHandlerService.java:10087)

  at org.apache.thrift.TServiceClient.sendBase(TServiceClient.java:63)

  to oracle.epm.fm.common.service.loadextract.LoadExtractHandlerService$ Client.send_loadData (LoadExtractHandlerService.java:639)

  to oracle.epm.fm.common.service.loadextract.LoadExtractHandlerService$ Client.loadData (LoadExtractHandlerService.java:629)

  at oracle.epm.fm.domainobject.loadextract.LoadExtractOM.loadData(LoadExtractOM.java:269)

  at oracle.epm.fm.actions.LoadDataAction.execute(LoadDataAction.java:100)

  at oracle.epm.webservices.fm.ActionsService.LoadData(ActionsService.java:315)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  Post edited by: 2837182

  Got it working now.

  Case of a brain freeze. The data file must be located on the server.

• Matter of business for OSB 10.3.1 when to call the web service from SAP ECC 710

  Hello
  
  1. I was a unit test for a business service that calls a web service from SAP ECC 710 (this service is published directly to a RFC function via SOA Manager module);
  
  2. the problem is when I use the OSB test console, which generates the request below message:
  
  < soapenv:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv >
  * < soap: Header xmlns:soap = 'http://schemas.xmlsoap.org/soap/envelope/' > *.
  * < / soap: Header > *.
  < soapenv:Body >
  < xmlns:urn urn: Zmmjf503 = "urn: sap - com:document:sap:soap:functions:mc - style" >
  string of < ContractInfo > < / ContractInfo >
  < / urn: Zmmjf503 >
  < / soapenv:Body >
  < / soapenv:Envelope >
  
  the response message is:
  < SOAP - env:Envelope xmlns:soap - env = "http://schemas.xmlsoap.org/soap/envelope/" >
  < SOAP - env:Header >
  < n0:MessageID = "http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:n0 >
  UUID:4cbe5b84 - 474 c-9abe-e100-00000ad00164
  < / n0:MessageID >
  < n1:Action SOAP - env:mustUnderstand = "1" xmlns:n1 = "http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:soap - env = "http://schemas.xmlsoap.org/soap/envelope" / >
  < / soap - env:Header >
  < SOAP - env:Body / >
  < / soap - env:Envelope >
  
  
  Above the response indicates that the BS called SAP Web server successfully, but seems that the service did not get the request message.
  
  3. the Web service can be called successfully through SoapUI. and I checked the soapUI request message; and it can work if I just change the request:
  
  < soapenv:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv >
  * < soap: Header = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:soap > < / soap: Header > *.
  < soapenv:Body >
  < xmlns:urn urn: Zmmjf503 = "urn: sap - com:document:sap:soap:functions:mc - style" >
  string of < ContractInfo > < / ContractInfo >
  < / urn: Zmmjf503 >
  < / soapenv:Body >
  < / soapenv:Envelope >
  
  and I got the right answer:
  < SOAP - env:Envelope xmlns:soap - env = "http://schemas.xmlsoap.org/soap/envelope/" >
  < SOAP - env:Header / >
  < SOAP - env:Body >
  < n0:Zmmjf503Response xmlns:n0 = "urn: sap - com:document:sap:soap:functions:mc - style" >
  < Recmsg > <! [CDATA [<? xml version = "1.0" encoding = "utf-8"? > < DocumentResponse > < CONDITION > 0 < / STATE > < HTBH > < / HTBH > < MESSAGE > < / MESSAGE > < / DocumentResponse >]] > < / Recmsg >
  < / n0:Zmmjf503Response >
  < / soap - env:Body >
  < / soap - env:Envelope >
  
  4 it bother me, because the only difference between the above two request messages is the header (one contains a "newline"):
  ------------------------------------------------------------------------------------------------------------------------------
  * < soap: Header xmlns:soap = 'http://schemas.xmlsoap.org/soap/envelope/' > *.
  * < / soap: Header > *.
  -------------------------------------------------------------------------------------------------------------------------------
  VS
  --------------------------------------------------------------------------------------------------------------------------------------
  * < soap: Header = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:soap > < / soap: Header > *.
  ----------------------------------------------------------------------------------------------------------------------------------------
  
  5 I thought that the SOAP engine should ignore "carriage returns", seems this is a problem of SAP ECC710.
  
  Do you have someone having this problem? Thank you
  
  
  Concerning
  Wen

  Hello Wen,

  I tried to use exactly the same request (carriage return) to call the service through soapUI, and it does not work... just like BS OSB
  should I assume that it is a matter of SAP ECC?

  That same demand also doesn't SOAPUI so certainly it's an issue with SAP ECC. I doubt that SAP ECC is the treatment the carriage return as an end of file marker. Check with support.

  Kind regards
  Anuj

• How can I fnd my claim code and the reprint of the web services information sheet

  Hi, I have a HP Deskjet 3520 and try to put in place the eprint.  I read the suggestions on the forum and the FAQ but I can't locate the web services information sheet I need to reprint for claim code.

  Could not find anything under Printer Control Panel either. Please advise!

  Thank you!!

  Hi Chris88,

  Welcome to the HP Support forums.  I appreciate that you try to configure the ePrint on your Deskjet 3520 printer feature.

  If you have the inkjet printer Deskjet 3520 with a C8994 product number this printer does not have the ePrint service.  The Deskjet 3520 printer only has USB connection and ePrint to function the printer must have an independent internet connection through a wireless or a wired ethernet network.  I've included the specifications of the printer for your reference.

  If you have the e-all-in-one printer Deskjet 3520 then we obtain the claim code.  You can request the information sheet of web services from the front panel of the printer, and there the claim code printed in blue. Instructions on how to get it can be found in the section titled "to print a document using ePrint' in your on page 15 user's guide.  Please follow the instructions in step 1.

  HP Deskjet 3520 inkjet printer specifications

  User's Guide e-All-in-One Series HP Deskjet 3520

• Impossible to activate the web services photosmart7515

  On the web services on my printer I get

  e-mail connection error

  ePrint connection error

  Web services connection error

  What can I do?

  Hi Catjoy36,

  Thanks for the reply.  It seems that we have to take steps more.  Follow the steps below, and once you complete the steps, then you can follow the steps above.

  1. go in the front panel of your printer.

  2. Select the icon wireless on your printer.

  3. Select settings.

  4. highlight and select restore default network settings.

  5. click OK to restore default values.

  6. now, select Wireless and go through the wireless configuration wizard.

  Let me know how it goes.

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!

• Unable to connect to the Web Services Proxy/unused (a HP 7500 JO)

  Hello

  Here's the situation:

  Previous installer:

  .  I have connected my 7500 for the corporate network (IP = 172... series)

  .  registered the product with ePrintCenter

  .  used a PC under Windows to print (and scan) with the printer

  .  web proxy entry "webproxy.phila.gov".

  .  However, because homeland security rules, I could never work, so I just let it go

  Current situation

  .  has taken the home printer and set up on my home network, i.e.,.

  -using the 192.168.xx.xx series

  -Router broadband Netgear ' G' (1 years) set up at the 192.168.xx.254

  -SSID & encryption assigned

  -printer, the value 192.168.xx.155 (static IP address, the subnet and the gateway assigned as well)

  -My DNS is identical to the bridge and it works fine for all the internet access to this day

  -with the help of a PC and a Macbook Air to print and scan and everything works fine

  .  HOWEVER,.

  -Initially, 'web services' were active (carried over from when I was on the company neetwork?)

  ..  Are looking for, found and downloaded updates

  -When I went to hp.com ePrintCenter he showed the product as 'registered '.

  ..  He would'nt I would like to connect (with a name and a password I had used previously), or create a new account

  ..  I never remember getting an email address of the printer

  ..  and I had never been able to send anything to the printer to print because of my problem of network security

  -Yes, after trying all sorts of things, I:

  ..  I tried to get another email without success

  ..  tried to re - enable web services, but he said I need to 'proxy', and I discovered that he had always "webproxy.phila.gov."

  ..  I have reset the values by default web services and network values

  ..  I put the static IP address return address in (i.e., printer, subnet and gateway (it has nowhere to put in a DNS one))

  ..  printing and scanning to 192.168.xx.155 works fine

  ..  From my iPad AirPrint works very well

  .  BUT, I still can not online and therefore web server, web services are not enabled, therefore not ePrint

  -everytime I try, it says it needs a proxy

  - but I don't have a proxy installed on my internal home network bit

  -Comcast/Xfinity, my ISP, do not use a proxy

  So, I'm dead in the water.  I can't figure out how to get the web services enabled; I do not use a proxy, so I don't know how to go beyond this issue. How to regenerate address of the printer; and so, how do I connect an account on the ePrintCenter (or get them to send me my old account information).  I'm dead in the water and cannot use a feature most of my printer that I desperately want to be put in place and functional.

  Any help would be greatly appreciated!

  Tommy

  Problem solved, but I don't know exactly how I did it. However, I went back in and let the printer assign the IP address. Then I turned the printer off and on again. Last I kept pressing the button "Printer e-mail address", who has repeatedly failed, but then finally went through and print the 'printer' page, I quickly used to connect to the ePrintCenter and put everything in place.
  
  Now it's working.

• VIX file in the user interface designer receives the data from the Web service application that communicates with the SQL server database

  I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.

  This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.

  Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?

  There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")

  Please help me ASAP!

  Thank you

  Ivan

  I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.

  It's important to create the system DSN if you want your VI of web service to communicate with the database.

  PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.

• The Web Service of LabVIEW error on restores model ESP

  Hello

  I was hoping that people would be able to help with the following problem:

  I'm currently on the Page Embedded Server (ESP), functionality of the LabVIEW webservices script and keep receiveing an error when you try to view a page.

  I think I put in place the Manager HTTP queries properly - buffered stream with headers

  The correct model is located and used as the page reaches the insertion point variable esp.

  I find that the AddressBook example works fine, unless I try and add an additional variable to the model, then the same error occurs.

  I have attached a sample project which shows the same behavior, and the error is less.

  Tested on LabVIEW 2014 (14.0.1 SP1) 32-bit on 64-bit Windows 7.

  See you soon

  John

  *****************************************************************************************************

  Error-67035 occurred at .vi NI_WebServices.lvlib:Error Converter (ErrCode or status)

  Possible reasons:

  LabVIEW: The Services Web of LabVIEW (Hex 0xFFFEFA25): error in the ESP.

  «"" "String of full appeal:»»"»
  NI_WebServices.lvlib:Error Converter (ErrCode or status) .vi
  NI_WebServices.lvlib:Web Request.lvclass:Render ESP Template.vi
  Test.VI
  Test.vi.ProxyCaller

  *****************************************************************************************************

  Hi John_Neutron,

  I worked on your code today and we managed to reproduce and to fix the error you saw.

  The Web service name ESP file and rendering the page, but it throws the error because the variable you are trying to set was not properly declared. We managed to make the error go away by changing the file text with Notepad like this ESP.

  --------------------------
  <%
  //This is a server side comment
  // Variables:
  var myvariable;
  //
  %>

  
  

  This is the test pattern

  
  
  It's the body:

  Here's the varaiable

  
  

  Variable: @@myvariable

  
  ---------------------------

  Before, you had / / in front of the variable (making a comment) and you don't have "var" to tell him you have said anything (it's all in the 4th line). Without the appropriate statement, the code generates an error when it is called.

  Vsenior

• URL of the Web Service, LV2013 vs LV2012 length limits

  (* CROSS POST: http://lavag.org/topic/18435-web-service-url-length-limits-lv2013-vs-lv2012/ *)

  (* Please answer in this forum.  I scored the other thread for responses here. *)

  A that someone noticed a reduction in the limit on the length of the URL for the Web Services between the versions of LV 2012 and 2013?

  Under LV2012, a RESTful web service seems to accept URLS with lengths at least as long as 4096 characters.  With LV2013, the maximum length of URL seems to be 511 characters for RESTful web services as the project item. Unfortunately for me the project, I have converted just travel on this issue. My goal with posting this request here is my understanding of this limitation before deciding the best way to modify my code.  Certainly using POST instead of GET with a long URL is an option, but again, I am looking to understand the change in limitation before choosing a solution.

  To illustrate, I enclose three projects for the most part identical, demonstrating the issue.  In each case, the project contains a webservice consisting of a single VI, 'ComputeLength', which takes a string as an input parameter and that returns the length of the string.  The three projects are the following.

  1 LV2012 RESTful WebService.

  2 LV2013 RESTful WebService.

  3 LV2013 article project web service.

  The web service contains a single VI.  For the relaxing examples, the web service is started by selecting deploy menu of right-click Build specification.  For the example of project item, the web service is started by selecting start in right click menu position of work/WebService. The use of this example is shown with the following URL:

  (Note that the port is 8080 for both relaxing examples and 8001 for the project web service point if used in debug mode, which is the default value for the statement above.)

  http://localhost: 8080/webservice/computelength? string = 1234567890

  And the output looks like this.

  Workaround.  Apparently from 2013 of LV, there is a default limit of 512 to the length of the URL.  The default limit can be overridden as described below.

  Martin

  He is Brian in the technique of applications for National Instruments. I am following up about the 511 character limit in your Web Service HTTP request after the port number. After some research, I realized that the problem is related to a web site by default, the setting of the server called "LimitUri", which limits the maximum length of a URL. The default is 512 characters long that's why we are seeing this problem.

  There are several ways to modify the URL length limit depending on how you use your web service. If you publish the web service using the Application Web Server can change "C:\Program Files (x 86) \National WebServer\NIWebAppServer.conf" and add "LimitUri 4096" at the end of the file without the quotes.

  If you run the Debug Web server simply by clicking start on the web service, and then change "C:\Program Files (x 86) \National 2013\resource\webserver\niwsdebugserver.conf" and add "LimitUri 4096" at the end of the file without the quotes.

• deploy the web service to xp embedded

  Hi all

  I struggle to run a web service on an xp embedded system. The web service works very well in my LV 2011 development environment and I have created an installer for my main application it is the lvws file is included as described in web services FAQ:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7747#toc12

  After the installation on the target computer, I can't access the web service. Also if you call localhost:3580, then I get an access error.

  But in the System Control Panel administrative tools, I can see that the server system OR like many Web server OR Web applications are started.

  For further investigation, I added the 'Distributed System Manager' to my Installer. With this tool, I see that all my web services deployed on my development system, but on the XP embedded system with TEN target is listed.

  I installed my application for a professional reference XP system to exclude that the problem is caused by embedded XP. But the behavior is exactly the same. So far, I tested only local so that settings security like firewalls and ports system should pose no problems. But to be sure I have disabled the firewall without success... I can't access the Web service. I have often found the suggestions in the forum to check if the web service is enabled. But I am not already and then access to http://localhost:3580.

  Any ideas?

  Thank you!

  This help document is somewhat outdated.

  You see 2 different problems: 1) you can not display the Configuration utility and do not install Web using localhost:3580 2) your web service monitoring.

  For the first number-->

  You probably did not understand the "Interface Web NI 2011 infrastructure" in your Setup program.  The doc to help you mentioned does not tell you to do, because it is not necessary for your web service works. However, if you want to change one of the settings of your web server after the installation, you will need this extra setup program.

  For the second question-->

  You probably didn't get your Spec to build Web services as a source file in your Setup program.  The help doc says to put your LVWS file as your installation source, but this is not correct. You must include the technical article to build real web service as a source file (not the web service create out of spec files, like LVWS).

  Let me know if any of these will help you.

  -Jared

• change the frequency for the web service

  I'm under LabVIEW Web Service with an application following the method shown in the example of weather monitor. But my problem here is that I have to keep clicking the Refresh button, then the Web Service can only update the latest data for me. Can someone help me to set an example on how to let the page Web of the Web Service automatically update the value without pressing the Refresh button. Thank you

  First of all your customer needs to support it. If you use the HTTP Client in LabVIEW (GET.vi and so on) you cannot use this method. A normal browser should.

  Take a look at the address book example FindContacts.vi.

  The help topic linked in the previous post, you should get on the way as well. The news are scattered throughout the help file, but it should be possible to understand.

  Basically, there are two output options for a web service VI: Terminal mode as used in the example weather and fashion such Stream used in the example address book VI.

  Use stream mode and build the HTML page yourself, then sends it to the browser with Response.vi write. Somewhere in the top of the HTML page, you need to insert

  If you need to return a string like

  
  
  
  
  
  If your browser supports Refresh,
  this page refreshes in 5 seconds.
  
  And add some real contents here
  

  See also W3C .

  Good luck