Launch Windows Desktop as a separate browser process. Why?
We are therefore implementing a pilot project VDI. We streamline our process of creating image and I leaned upward performance settings and the guidelines for additional ideas on several different guides, I saw that it is recommended to configure the virtual machine to start the office as a separate process Explorer. The implementation is not a problem, the question I have is why? Is there something VDI where this would be a particular value? This is for performance or just isolation\stability? I just want to understand the why, before, I implemented the how.
Thank you!
Is there something about VDI that this would make more valuable?
Probably not. One thing that I've learned about people, once they find something that works, they are not interested in change, even if it means it's extra work. It was probably necessary when VDI is out, or maybe it was on a version of Windows that is has not been fully supported. So they have found a work-around, never really tried with a newer version of Windows and guess that this is still a requirement.
I looked at these docs, I see no evidence, there must be a separate process to explore. I think they do it because that's how they did it, and I think this rather lazy. Things change, why not process?
Tags: VMware
Similar Questions
-
"! "Error launching browser window: No XBL binding for browser".
Windows Vista: When I try to start Firefox I get! "Error launching browser window: No XBL binding for browser". I get this msg of error only with launch ff. Chrome 9 and IE 8 without problem. What should do?
@Syed: though even this link is very old-info, I took the advice of completely uninstall FF and then redownload and reinstall. That solved the problem. So thank you!
-
Using the Properties window for the Table of contents, the general tab Page, I can specify a web address for the link to the field. If I click on this page table of contents after the project is compiled, the URL is displayed in the topic of the current pane. Is there a way to open the URL in a separate browser window or tab instead of in the topic of the project pane? Thank you!
I think the answer is to revisit properties!
See you soon... Rick
-
Can Muse links open in a separate browser window?
Is there a way to make hypertext links within the Muse open in a separate browser window?
Yes there is, with the selected hyperlink click the aat blue 'links' above and select 'Open link in a new window or tab.
-
Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.
Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet. I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.
I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.
I have xp of the process and have nothing wrong.
Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.
Any suggestions would be greatly appreciated.
Thank you! :>)
Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet. I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.
I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.
I have xp of the process and have nothing wrong.
Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.
Any suggestions would be greatly appreciated.
Thank you! :>)
The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything. Install any plugins that you NEED to do all that you see here that the bat hurt. If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.
To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion? Not that I'm defending something - I was wondering what you did to decide who is not your registry database? (Side: I agree with you.)
That's what * I * would call cleaning and optimization of a Windows XP machine:
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
The less you have to run all the time, most things you want to run will perform:
Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.
You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.
Do a house cleaning and the dust of this hard drive:
You can free up disk space (will also help get rid of the things that you do not use) through the following steps:
Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.
If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
http://www3.TELUS.NET/dandemar/spack.htm
(Especially of interest here - #4)
(Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning
How to use disk cleanup
http://support.Microsoft.com/kb/310312You can disable hibernation if it is enabled and you do not...
When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:
-Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
-Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
-Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.You can control the amount of space your system restore can use...
1. Click Start, right click my computer and then click Properties.
2. click on the System Restore tab.
3. highlight one of your readers (or C: If you only) and click on the button "settings".
4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
5. click on OK. Then click OK again.You can control the amount of space used may or may not temporary Internet files...
Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
-Open a copy of Microsoft Internet Explorer.
-Select TOOLS - Internet Options.
-On the general tab in the section 'Temporary Internet files', follow these steps:
-Click on 'Delete the Cookies' (click OK)
-Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
-Click OK.
-Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
-Once it's done, click OK, close Internet Explorer, open Internet Explorer.You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:
CCleaner (free!)
http://www.CCleaner.com/
(just disk cleanup - do not play with the part of the registry for the moment)Other ways to free up space...
SequoiaView
http://www.win.Tue.nl/SequoiaView/JDiskReport
http://www.jgoodies.com/freeware/JDiskReport/index.htmlThose who can help you discover visually where all space is used. Then, you can determine what to do.
After that - you want to check any physical errors and fix everything for efficient access"
CHKDSK
How to scan your disks for errors* will take time and a reboot.Defragment
How to defragment your hard drives* will take timeCleaning the components of update on your Windows XP computer
While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.
Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)Reset.
Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)Reset.
and...
Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:Close all Internet Explorer Windows and other applications.
AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...
Reset.
Now reset your Windows with this FixIt components update:
How to reset the Windows Update components?Reset.
Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:
Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.
If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.
-
Original title: widows installation problem
I have Windows XP Professional running on a desktop older. I cleaned the disk and I would use it only as a 'internet '. It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»
The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product. Windows Installer cannot continue. »
This will take place two or three times at the beginning upward. How can I prevent Windows Setup tries to install something that I do not use or do not seem to have? I deleted any fax program, that I could find on the computer, and nothing seems to work.
Hello
1. have you done any change in software on the computer lately?
2. are you able to install other applications and programs successfully?Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
a. refer to the article below for the procedure safe mode in Windows XP
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222b. you need to perform a clean boot to find the program that is causing and then disable or remove.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Problem installing KB980408 - set up the parameters for custom: Windows Desktop Update
After installing KB980408, the computer restarts, goes through the normal boot process, displays the Windows logo, and then goes to a black screen with a window:
Custom settings
Implementation of the custom settings for:
The Windows Desktop Update
and stay on it indefinitely (4 + hours so far). Moving the mouse on the screen shows the circular cursor "wait", and I am able to move the window around; I am also able to start the Task Manager and restart, but that's all.
So I thought another reboot may solve the problem, but it doesn't... it keeps just hung to this window.
No matter who else affected by it, or have solutions to try?
I had this same problem on both machines. During his connection, this behavior began immediately after the KB980408 update has been installed. The solution I found is to ctrl + alt + delete, start taskmgr and kill the task of custom settings. Then you have to manually run explorer.exe (file--> Run--> Explorer.exe) and windows should load as usual. The next time that I rebooted and logged in Windows loaded as usual. I'm guessing that this problem is a "run once" task. However, updates are not supposed to make your computer more stable?
-
I have a lenovo computer. I began as routine but unfortunately it says error:-what is media test failed error PXE - 61 and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop computer? How do I prevent this.
Kala
Hello Mohan,
· You did changes to the computer before the show?
These errors often occur if there are incorrect BIOS (Basic Input\Output System) settings.
Method 1: Check if the computer startup options are changed in the BIOS. You can set the hard drive as the first boot device. In addition, make sure that this option "Wake on LAN" or one similar to it is off.
Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer.
Important : Change/update BIOS can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.
-
In the Windows Task Manager, I have 76 processes running. What are they all? Can I reduce/close them?
I am only a very lightweight browser and the user of the social network. I do not use my PC for something else.
It is average for a system Windows does not.
Windows is broken down into different components so they can be executed in parallel to improve performance.
Their closure will cause your computer to malfunction and eventually fails.
Run process Explorer to give you a description of each process and information on the services that are running in each svchost process.
-
Windows 10 has failed 75% error oxc 1900-ox 400 d has failed in the second phase of startup with the error during the operation of the Migrate_data on my windows desktop 7 using media creation tool. Help please.
Turn off the computer.
Wait 10 minutes.
Start the computer.
The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows.
Launch the prompt with administrator privileges.
Press the Windows key + X
Click prompt (Admin)
Type the following command:
Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN
Press enter on your keyboard
Exit command prompt
Restart
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times and try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Do a clean boot, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
- If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
Will be able to choose only the last the last row in a window/desktop icon in Windows 7
I use my laptop with Windows. Recently I could not open the icons/files you want in the Office of a window.
I may be able to choose only the last the last row in a window/desktop icon in Windows 7.Although double-clicking on an icon only the last icon in the window opens. Pls help me...Hi Peter,.
1 when was the last time that the desktop icons worked?
2. you have any security program installed on the computer?
3. don't you face any performance issues on the computer?
4 did you a recent software or changes to the material on the computer?
Method 1:
I would say allowing you to run the FIXIT from the link provided and check.
Difficulty of broken desktop shortcuts and common system maintenance tasks
http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
Method 2:
If the problem persists, you can also run the Scanner security Microsoft and check all infections.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.
Method 3:
I also suggest to try to run the System File Checker scan on the computer. The scan will replace all the Windows files corrupted with new ones.
Click on the link mentioned below for further guidance on the scanning of the file system Checker
http://support.Microsoft.com/kb/929833
Hope this helps and let us know if you need more assistance. We will be happy to help you.
-
It seems that Windows media Encoder and photo IE10 Viewer are the root of the problem, and it is about the whole MS Platform in desktop for what anyone associated media. As easy as it is to use another browser or image viewer I find I like the windows photo viewer ability to preview multiple images and IE10 and 11 are more now then fix everything that exists.
The issue is having to restart or log out and back in just pass leak VRAM that can go up to 1400 MB and count. What said GPU - Z and ESTR. The memory of the system seems to be in check most of the time. Get off my GPU memory Windows.
I mean leak even with the left running only windows desktop and essential tasks to keep it that way. I have games that will never saturate 1.5 GB of video memory on my setup. Darn Far Cry 3 does not work. I'm ranting, namely. At the same time being a little in-depth play play of this recurring problem.
In case the VP and general manager or anyone else to Microsoft is approaching through it all here is the short version:
Video memory leak in Windows 8. How can I fix this in the Windows desktop. Is there a way to erase the GPU cache and reduce the use VRAM 160MO? is there a fix? is there a value from regedit?
Hey Marv,
Thanks for posting your query in Microsoft Community Forum.
According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.
TechNet Forum
http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=W8
Hope this information is useful.
-
Launch Windows Fax & Scan more...
I feel so stupid! I can not even find the "launch Windows Fax and Scan." and where is the 'Start' button that shows the software loaded? The top-right corner start button does squat!
So frustrated with this new computer, I'm going back to my xp and all risk security issues!
Hello
That's what you try to do?
You use Windows 8 and Internet Explorer?
Right click on the Start button (see the arrow to the left Fig. 1 below)
Click on Control Panel (right arrow below)
Select to display the devices & Printers (see Fig. 2 below)
Search within printers Fax, printer & Microsoft XPS Document Writer
If you use Windows 8, just start typing Windows Fax and Scan on Metro desktop
Search opens and you will see it appear. See figure 3 below
-
Help - installed VMware and Windows 7 and I can not see my Windows desktop
Hello
This could be really basic, but I can't seem to get by:
I just installed VMware 8 on a new Macbook Pro (OS El Capitan).
I then installed Windows 7, apparently successfully, all the way up to Windows installation was finished and I went to open the virtual machine for the first time. The office opened very well, but when I went to maximize this mode full-screen, I essentially disappeared. She is obviously still ongoing, as he urged on antivirus McFee, that I installed it successfully.
In the library, the virtual machine appears grey, with a basket and McFee icon.
I tried to uninstall the machine and install again, but the same thing happened...
Any ideas?
In fact, here is a better description of what's going on...
You are in mode of "unity".
It is a "cache" mode the windows desktop and allows access to applications as they were Mac apps.
In your menu bar, there is an icon for the merge, and you can launch Windows apps from there.
Alternatively, you can simply use "Single window" or mode "full screen" for the traditional windows back office.
The button to switch is in the "View" menu
Hope that helps!
-
The content of my site is misplaced and shrunken Apple desktop devices. The browser provides information on devices, but the content do not place nor scale properly. The reason for this problem would be failure to adjust the size of the browser in Muse? I conceive on a 23 inches HD Windows desktop base. My site is displayed as it should, except on Apple desktop devices.
This may depend on several things as if contents are pinned, scrolling is applied etc.
Try to resize the browser preview in the Muse for verification, site url will help you to study.
Thank you
Sanjit
Maybe you are looking for
-
MacKeeper is not installed? Is my computer safe?
I have an iMac (first generation, I think) I don't know much on the computer... I know I downloaded the Mackeeper... but I do not think that I installed it... And I just want to know if my computer is SECURE? I think I have and iOS 9.1 but, I don't k
-
Error of initialization of Simulation 54 to SIT
Hi all I have been involved in the examples to SIT and have opened the example "lot simulation.vi. Then, I changed it to make it work the sinewave.mdl from the example of the sine wave. This was all good and well. Then, I decided that I wanted to run
-
Get all Tables in a MS Access database
Hello world I would like to know how to get all the table names in a database (MS Access) using commands to query... If anyone has the solution, well want to share with me! Thanks in advance.
-
Update failed for Windows Vista failed KB975517
I get the same message update failed
-
I have a second video clip 90 I want to reduce to 50 seconds by removing 10 seconds at the beginning, 5 seconds to end & 25 seconds on average. This means that I use two non-contiguous segments in the middle. The use of 'The Start Trim Point value' a