NEED HELP ON NETWORK!

Similar Questions

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• BlackBerry, need help Urgent network connection problem

  Hi all

  I put an application Blackberry OS 6 and 7 of the OS, this application uses the salesforce connection and its other api calls.

  My application works well here in India, but when I deliver it to the customer I had connection timeout error (in the United States). I tried all the string connection possible but still unable to solve the problem at my end.

  Can someone help me with this problem?

  Its very urgent. I need to connect via WAP2 and the code for my connection parameter string is:

  "

  Dim connectionString As String ="";

  String carrierUid = getCarrierBIBSUid();
  String wap2 = getWAP2ServiceRecord();
  If (carrierUid! = null) {}
  Otherwise, use the Uid to build a valid transport BIBS
  request
  Logger.logEventInfo ("uid is:" + carrierUid);
  connectionString = '; deviceside = false; connectionUID ="
  + carrierUid + ";". " » ;
  } ElseIf (wap2! = null) {}
  connectionString = '; deviceside = true; connectionUID =' + wap2;
  } else {}
  A carrier coverage, but not the BIBS. So use TCP of the carrier
  network
  Logger.logEventInfo ("no Uid");
  connectionString = '; deviceside = true;
  }

  return connectionString;

  "

  the definations of function are:

  "

  private static String getCarrierBIBSUid() {}
  Reviews [ServiceRecord] is ServiceBook.getSB () .getRecords ();.

  for (int i = 0; i)< records.length;="" i++)="">
  If (records [i] .getCid () .toLowerCase () .equals ("ippp")) {}
  If (records [i] .getName () .toLowerCase () .indexOf ("bibs") > = 0) {}
  Records return [i] .getUid ();
  }
  }
  }

  Returns a null value.
  }

  private static String getWAP2ServiceRecord() {}
  Full book sb = ServiceBook.getSB ();
  Reviews [] ServiceRecord = sb.findRecordsByCid ("WPTCP");
  String uid = null;
  for (int i = 0; i)< records.length;="" i++)="">
  Search through all records of service to find the
  valid non-Wi-Fi and non - MMS
  Booklet of WAP 2.0 Gateway Service.
  If (records [i] .isValid () &! records [i] .isDisabled ()) {}
  If (records [i] .getUid ()! = null)
  & records [i] .getUid () .length ()! = 0) {}
  If ((records [i] .getCid () .toLowerCase () .indexOf ("wptcp")! = - 1))
  & (records [i] .getUid () .toLowerCase)
  .indexOf("wifi") is - 1).
  & (records [i] .getUid () .toLowerCase)
  .indexOf ("mms") ==-1)) {}
  UID = records [i] .getUid ();
  break;
  }
  }
  }
  }
  If (uid! = null) {}
  Open a connection WAP 2
  Returns the uid;
  } else {}
  Consider another action transport or alternative.
  Returns a null value.
  }

  }

  "

  I get "unable to select the descriptor of adequate transport for the url:

  "https://login.salesforce.com/services/oauth2/token ...". "

  any help is appreciated

  Thank you

  Manish Kumar

  Hi all

  I solved the problem.

  My connection setting requires '; EndToEndDesired' for HTTPS request (although it works for me without this parameter). I tested the app using deviceanywhere and after the addition of this application of the setting run perfectly.

  connectionString = '; deviceside = true; connectionUID =' + wap2
  + "; EndToEndDesired ';

  Thank you for your comment stone

  I was actually using reproductive WAP2.

  Version of the client OS is BB OS 7 (on the Torch 2 9810)

  Concerning

  Manish Kumar

• Need help with network controller update

  It seems that my controller network and PCI simple Communications controller are not installed. Can someone give me a link to install it please?
  My material, I would
  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C & REV_10
  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C
  PCI\VEN_10EC & DEV_8171 & CC_028000
  PCI\VEN_10EC & DEV_8171 & CC_0280

  Hello:

  You need this driver for your laptop wireless card.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.tpst=swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_102577_1%257CswEnvOID%253D%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  See if this driver works for the PCI Simple:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=4095873 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118167_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• Need help identifying network map

  I can't find the name of this network adapter:

  DP/N: 0003710 T-12463-043-05:08

  on the front a sticker with:

  15013 A08922-001 00D0B77E6E3B

  I would appreciate the help.

  Hi BaasjeBaas,

  If you talk about the card as shown in the image below:

  

  It's a DELL 10/100Mbit network PCI adapter

  If you have any other questions answer the same thread.

• Need help with network adapter WLAN which disappears

  802.11n WLAN driver adapt
  Lenovo IdeaCentre q150 10053
  Win 7 Home premium

  Some how I screwed up my computer.  Long story short, wireless network adapter disappeared as an option, so I downloaded the drivers for a USB key.  Run the wizard, but I always get an error saying that the adapter is missing the drivers.

  Any suggestions to fix this?

  Thank you
  Van

  Hello

  Have you made changes before the start of this issue?
  See the link below to troubleshoot the network adapter.
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  For reference:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   
  I hope this helps.

• Need help with network Test lab configuration

  I have the Setup VLANS on Cisco switch (4506) and I put aside in ESX (3.5) in its own switch port, but I'm not able to get the systems on this switch to connect.  They seem not to see each other even if they are on the same subnet and the same vlan.  Ideas?

  Looks like it's maybe a configuration problem of VLAN.  On the Cisco switch is the port connected to the network test card NETWORK set up as a trunk port?  If you want to make sure it has 400 VLAN assigned to the trunk.  If it is not defined as a trunk port, you must remove the tag VLAN from your virtual switch.  If the port of Cisco is not defined as a trunk, then the Cisco switch sends tags VLAN to the vSwitch and the vSwitch is looking for packets marked as 400 and not something else by the way to the virtual machine.  Either the trunk or the vSwitch VLAN parameter will be changed to solve the communication.

  If the end goal is to have several VIRTUAL networks appear on network vSwitch test then I'd go the route set port of Cisco to the trunk.  If you just want a VLAN to appear on the vSwitch test then I would keep the port Cisco defined how it is assigned to 400 VLANS and delete reference VLAN of the vSwitch.

  Hope this helps, please give points if it was useful.

• 4540 proBook s product ID C9K7O: I need help with network controller driver installation.

  I had to install Windows 7 Premium 64-bit operating system and the network controller was not recognized and therefore, the drivers were not installed. That's what I see in Device Manager:

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
  
  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
  
  PCI\VEN_168C & DEV_0032 & CC_028000
  
  PCI\VEN_168C & DEV_0032 & CC_0280

  I got a driver to download from technical support, but that it does not recognize the controller either. Reference case # (deleted content)

  Dad.

  Have you tried this one?

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229456 & swItemId = ob_128686_1 & swEnvOid = 4059

  REO

• Need help with network drivers

  OK, so I was on win 7 trying to dual boot with Ubuntu when my os disappeared, so I installed Linux Mint and downloaded win 7 on that I then did a boot able USB and installed it via that he started toward the top and then I got an error saying no connection and no connection available even when I plugged it in via a cable Ethernet and it still does not work I tried to install some drivers intell another question, but it did not work I am running a NE56R of the entrance door if it help thank you!

  Install the drivers for your product from the link below.

  NE56R

  http://us.gateway.com/GW/en/us/content/drivers-downloads

• Need help with network inside and outside Transmittion script

  Hi, I have a problem in my script. I would get Vm net.received.average and net.transmitted.average. Somewhere, it displays the empty output for me, can I have a sample of script on obtaining transmittion of network for 7 days

  My script:

  $report = @ (get - Vm = $vms). where {$_.} PowerState - eq "Receptor"} $lastWeek = (get-date). AddDays(-7) foreach ($vm in $vms) {$vmNet = "" |} Select VmName, NetworkReceive, NetworkTransmit $statReceive is Get-Stat-entity ($vm) - start $lastWeek - finishing (Get-Date) - MaxSamples 1 - net.received.average stat. Group-object - property Instance $statTrans = Get-Stat-entity ($vm) - start $lastWeek - finishing (Get-Date) - MaxSamples 1 - net.transmitted.average stat. {Group-object - property Forum $vmNet.VmName = $vm.name $vmNet.NetworkReceive = "{0: F2}" f $statReceive.value $vmNet.NetworkTransmit = "{0: F2}" f $statTrans.value $report += $vmNet} $report | Select VmName, NetworkReceive, NetworkTransmit | Export-csv "c:\q33.csv".
  Thank you

  Both are related to the use of aggregation running on your vCenter

  Historical data interval 4 are grouped once a day, and on your vCenter this SQL task seems to be planned at 08:00.

  That is why the time stamp.

  Statistical data are aggregated to one historical interval to another.

  Since ask us the historical interval 4 (with the IntervalMins parameter), the aggregagtion to this historical interval is not yet made.

  This is why the last day 2 are not present in the report.

  You can play with the - Start and - finishing settings to have a period of 7 days which is at least two days yet at the time.

  $report = @()
  $metrics = "net.received.average","net.transmitted.average"
  $vms = Get-Vm | where {$_.PowerState -eq "PoweredOn"}
  $start = (get-date).AddDays(-7)
  $finish = $start.AddDays(7)
  
  Get-Stat -IntervalMins 1440 -Entity ($vms) -start $start -finish $finish -stat $metrics -Instance "" | `  Group-Object -Property Timestamp,EntityId | %{
      $vmNet = ""| Select VmName, Timestamp, NetworkReceive, NetworkTransmit
      $vmNet.VmName = $_.Group[0].Entity.Name
      $vmNet.Timestamp = $_.Group[0].Timestamp
      $vmNet.NetworkReceive = "{0:f2}" -f (($_.Group | where {$_.MetricId -eq "net.received.average"} | Measure-Object -Property Value -Sum).Sum)
      $vmNet.NetworkTransmit = "{0:f2}" -f (($_.Group | where {$_.MetricId -eq "net.transmitted.average"} | Measure-Object -Property Value -Sum).Sum)
      $report += $vmNet}
  $report | Export-csv "c:\q33.csv" -NoTypeInformation -UseCulture
  

• Need help with settings - wifi extension

  So I need help from networking. I have xfinity for my internet with a router/modem from arris tg1682g. However, it is located in a horrible place. So I run Ethernet to a central point and connected to an AirPort Extreme (latest version). Extreme, I ran Ethernet in the basement and connected a first gen express. I also have a second express gen located in the rooms upstairs.

  the extreme and express it is defined to extend the network, however the signal keeps a fall or be slowed down significantly even when you are inches apart. When I got the arris in bridge mode and the extreme to create the network and expresses it to extend everything worked fine. However, we have the security to the House installed xfinity, and they took the arris off mode bridge because they do not allow me to use the extreme for the security system. Since then, I got nothing else problems with my internet connection. It is either significantly reduced performance (up to 18mbps 150mbps).

  I also get error messages that the network is not found on the airport connected Ethernet devices.

  It has been very frustrating because the people Comcast it is horrible. So, any help would be greatly appreciated. Thanks in advance.

  https://discussions.Apple.com/message/29878786#29878786

  https://discussions.apple.com/thread/7195783 - is it possible to use the apple Time Capsule as a range extender?

• Windows 7 - need help to install Microsoft Network Version 2.0 Framework 64-bit

  I need help, I had someone install Windows 7 Ultimate on my laptop.  I have the 64 bit version, I read some of the other forums and I Framework 3.5.1 installed, and I get a message each time I log on that says "Microsoft Network Version 2.0 Framework" is needed to continue. I tried to get it in the downloads of Microsoft, but I get SO many results that I don't know which one I need. I could not use my wireless, wireless printer, I have Windows 7.

  You may wish to review the previous discussions on this topic: Http://www.google.com/search?hl=en&safe=off&rls=com.microsoft: en - US & q = + site: social.answers.microsoft.com and .net framework 2.0 + required + continues & his = X & ei = qNouTI2hDsH_lgfV8cWSCg & ved = 0CBkQrQIwAA ~ Robear Dyer (PA Bear) ~ MS MVP(c'estàdire,messagerie, sécurité,Windows&UpdateServices) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• Need help Kodak 5500 AiO printer over the network.

  I have a kodak 5500 AiO printer. I have vista on all my computers (1 bureau and 3 laptops). I downloaded the sp2 for vista on all computers, after I downloaded sp2 desktop mouse and keyboard froze, I had to uninstall sp2 to make it work. Now the printer on my home network to print or not be discovered by my laptop. I can see the printer on the network to my laptop but I can't connect to it. The printer is on the desktop via a usb cable. I deleted the printer drivers and reinstalled and downloaded the software and drivers for the latest printer.  I need help.

  Thank you

  Phil

  original title: using network printer

  Everyone,

  That's what I had to do to get my printer working once Vista it has messed up. You do the first two steps on the computer to which the printer is connected. The last step that you do for your laptop or you want to connect the printer to the main computer. I hope this helps.

  Hey all,.

  We had this same problem...

  We had to follow the procedure proposed by Drompa...

  > 1) share permissions
  >> 1. In explorer, select C:\windows\system32\spool\PRINTERS
  >> 2. Make a right click, properties
  >> 3. Tab sharing
  >> 4. Advanced sharing
  >> 5. Check "share this folder".
  >> 6. Permissions
  >> 7. Grant everyone full control
  >>
  (> NTFS permissions 2)
  >> 1. In explorer, select C:\windows\system32\spool\printers
  >> 2. Make a right click, properties
  >> 3. Security tab
  >> 4. Edit
  >> 5. Add
  >> 6. Advanced
  >> 7. Find now
  >> 8. Select 'NETWORK '.
  >> 9. Ok
  > 10. Total control of the NETWORK grant

  AND THEN we had to install local printers, using the port trick...

  1. go to 'printers '.
  2. click on "add a printer".
  3 Add a local printer.
  4. "create a new Port.
  5. use the "Local Port" option
  6. on "Enter a Port name" enter: "\\Computername\Printername".

  And if all goes well should do!

  Good luck!

  Credit to Drompa and otherdreams to help out me.

  Phil

• I need help setting up my home network - windows vista.

  I need help to configure my network, I ave a laptop & hubby the computer w / dsl wireless rouuter. If I can get trhis to work, maybe we can work on the printer.

  Original title: help w / home network

  Hi Luvy,

  Thanks for posting your query in the Microsoft Community Forums!

  Looks like you need information to set up home networking on the windows vista computer.

  We're here to help and guide you in the right direction.

  -What is the number of brand and model of the computer?

  I suggest you to return the items online help and check if it helps.

  Setting up a network home

  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-home-network

  Setting up a wireless network

  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  To install the printer on the network see Help below articles.

  Install a printer on a home network

  http://Windows.Microsoft.com/en-in/Windows-Vista/install-a-printer-on-a-home-network

   

  Share a printer

  http://Windows.Microsoft.com/en-in/Windows-Vista/share-a-printer

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.