Layer of BB cards custom Raster?

Similar Questions

• How to create a layer above a slider custom? [CS5 Pro]

  .. then the custom cursor would disappear behind the layer when moved through it.

  Currently, if the layer is simply put at the top of the list of layers [above the layer of mouse cursor] which published the mouse it replaces and appears especially layers... not behind a

  Thank you very much for your help ahead oh Holy Whizzkids

  First of all, try to remove the first line and see if it helps.

  Secondly, if this does not help, after this line do the same for any object that you have in the layer you want to sit on it the cursor... it must be items that you can target with the code.

  What addChild() does is it takes the target object and the square at the top of the display list.  For the first line is essentially uprooting whytehand of the timeline and placing it before any other content planted in the timeline.  So either you do not, or you also use it to place the other content above the slider.

• How do you incorporate a layer of framework of customer Xcode with InDesign?

  I am currently working on an iPad app for a client who requires that I include/embed Xcode libraries that have been specifically developed for their infrastructure and the AppStore internal.  Framework includes classes developed in-house and libraries that contain analytical usage, logging userid and password, authentication server, etc.

  Has anyone meet this situation during their development of application for a customer?  If so, how it incorporates the Xcode framework in InDesign if the compiler is located on the Adobe server?

  Thank you.

  You may not incorporate any Xcode in a DPS project.

  Only HTML working basis I fear

  Alistair

• Apex 4.0.1 Flash cards custom colors

  I'm in APEX 4.0.1 on 11g. I have a chart where I need to go back to different colors according to the different requirements.
  
  I have a calculation on an item page called P2_CUSTOMCOLORS, which creates a list of colors based on values and that returns the colors in the right order in custom colors.
  
  I put & P2_CUSTOMCOLORS. in the field of color personalized for the chart.
  
  I have pdebugged the value of the element and the colors returned are correct and in the correct order:
  
  #009900, #009900, #990000, #CCCCCC
  
  But when I run the table, all THE columns are the first color (GREEN). If I manually put the colors in custom colors, they all return the color of the first value of the color in the list.
  
  Anyone else seen this?

  Hi Walter,

  Sorry for the delay in answering your last question. I have set up an example of how you can apply thresholds to a graph, here: http://apex.oracle.com/pls/apex/f?p=36648:35. As you've already identified, thresholds with data association must be done within the tag < data >. By default, no threshold is associated with tables, so you would need to customize the tags < data > your horoscope in order to apply them. You can generate a process of PL/SQL page, to display the XML data in the required format, save this output to a page hidden item and then make reference to the page element in your custom XML (by replacing the string #DATA # with a reference to your hidden item). I described the steps that I followed, under the graph of the sample. This is just an example, so you can choose to generate your data in different ways. I hope this will help.

  Kind regards
  Hilary

• When I try printing to a custom size greeting card, it will not fill the page

  When I try to print a greeting card custom size, I can't print to fill the page, e.g. a 5 "x 5" card is put in place as 5 "x 10" but when it prints it is an important border, have tried up to this adjustment to the page, the best fit etc but not joy.

  Thank you very much for your help, I was ready to stop trying. I used already without borders for standard maps, but was having the problem with custom sizes, but by increasing the size slightly by setting without borders in custom settings, I have now managed to print a 5 x 5 "card.

• UCS-FI-DL2 - what is the function of this card?

  Hello experts,

  The customer wants to know what is the function of the map have DL2-FI-UCS (UCS 6248 layer 2 daughter card). Can someone tell me?

  It's like a simple layer 2 switching function? Thank you very much!

  Hello Pei Meng,

  Model UCS FI 6248, repalceable UG with cluster, console, and management ports.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/HW/6200-install-guide/6200_HIG_chapter_01.html#ID51

  HTH

  Padma

• Can I print my own business cards using HP phtosmart?

  I have a HPC4500. Y at - it software to print business cards customized with a picture on them?

  Jugo,

  What I would recommend you do is to download the Avery Label Pro add-in for Word and use it. What we must remember what using it however, is change print you 8.5 x 11 borderless settings when printing. Otherwise, your business cards print about 1/4 inch, especially towards the bottom of the page.

  You can print on cardstock and cut out them yourself or use business cards Avery.

• Can I upgrade the graphics card for my HP Pavilion g6-1301tx Notebook PC?

  Hi people,

  I want to know if I can upgrade the graphics card to my laptop. (like AMD to nvidia graphics card).

  Now, a day most of the high-end gaming is not

  work in my laptop and I'm very disappointed.

  Please let me know if I can do it. My laptop model is HP Pavilion g6-1301tx Notebook PC

   

  Product name g6-1301tx

  Product number A3V67PA

  Microprocessor 2.3 GHz Intel Core i3 - 2350 M

  Microprocessor Cache 3 MB L3 cache

  Memory DDR3 2 GB 1333 MHz

  Memory Max Supports up to 8 GB memory DDR3

  Video Graphics AMD Radeon HD 7450 M (1 GB DDR3 dedicated memory)

  Display 15.6 "HD BrightView LED backlit (1366 x 768)

  HDD 500 GB SATA (5400 RPM)

  Multimedia player SuperMulti DVD±R/RW with Support Double layer

  Network card Integrated 10/100 BASE-T Ethernet LAN

  Wireless connectivity Bluetooth 802.11 b/g/n

  Sound Altec Lansing speakers, SRS Premium Sound

  Keyboard Keyboard laptop with touches of home bread

  Pointing device Touch pad with on / off button and support for multitouch gestures

  PC card slot Media card reader digital multi-format for cards Secure Digital & Multimedia Card

  External ports

  • 1 VGA PORT
  • 1 headphone (stereo)
  • 1 microphone input
  • 3 USB 2.0
  • 1 RJ45

  Size: 37.4 x 24.5 x 3.63 cm

  Weight Starting at 2.3 lbs

  Power 90W AC Power adapter 6 cells Lithium-ion (Li-ion)

  What's in the box of HP webcam with integrated digital Microphone (VGA)

  Hello:

  Graphics cards cannot be updated simply.

  You will need to replace the motherboard with another which would have better graphics (if available for your model).

  This would cost as much buying a new laptop, so it is probably not a good idea to undertake such a venture.

• Can I change my graphics card?

  Hello

  My laptop is a HP Pavilion notebook pc g6-1200tx

  Product name g6-1200tx

  Product number QG468PA

  Microprocessor 2.3 GHz Intel Core i3 - 2330 M

  Microprocessor Cache 3 MB L3 cache

  Memory 4 GB 1333 MHz DDR3

  Memory Max Expandable to 8 GB memory DDR3 (8 GB mine)

  Video Graphics AMD Radeon HD 6470 M (2 GB dedicated DDR3 memory)

  Screen LED 15.6 "HD HP Brightview display (1366 x 768)

  HDD 500 GB SATA (5400 RPM)

  Multimedia player SuperMulti DVD±R/RW with Support Double layer

  Network card Integrated 10/100 BASE-T Ethernet LAN

  Wireless connectivity Bluetooth

  802.11 b/g/n

  Sound Altec Lansing speakers, SRS Premium Sound

  Keyboard Laptop with row keys keyboard

  Pointing device TouchPad supporting multi-touch gestures with on/off button

  PC card slot Card reader multimedia digital multi-format card Secure Digital, Multimedia Card

  External ports

  • 1 VGA PORT
  • 1 headphone
  • 1 microphone input
  • 3 USB 2.0
  • 1 RJ45

  Size: 37.4 x 24.5 x 3.63 cm

  Weight Starting at 2.3 lbs power 90W AC adapter

  6-cell Lithium-ion (Li-ion)

  What's in the box of Webcam with integrated digital Microphone (VGA)

  Thank you

  Hello

  Unfortunately no, your AMD chip is integrated with the system board and is not an evolutionary element.

  Kind regards

  DP - K

• FDMEE 11.1.2.4 - how to load the same record source of 2 different custom in HFM members

  Hi Experts,

  We have the following situation:

  We need download a source document unique member 2 custom end balance as well as two rollforward Member custom movement 2 (additions, for example), the SAME account.

  In our GL, we have separate accounts for the additions, disposals, depreciation, etc.   In HFM, we use custom for these last members.

  I tried the multi-dimensions mappoing member card custom 2 individual based on the story.   It works fine, but when I add another condition by using the same account of source and card balance end Member, he only ended up filling a 2 custom members (according to what has been covered last importing).

  What would be the best way to load a single 2 custom members (same account) source document?

  I wanted to use the accounts of logic since I know that would work, but our financial team do not accept this approach.

  It is even possible to load the same record of 2 different HFM Member?  Even if we loaded the file even a second time in another place, I think that it still would replace what took the first time, instead of loading again to another custom on the same member account.  Even if we loaded to HFM on 'merge '?

  Any ideas at all would be appreciated.

  Thank you
  Mark Smith

  Why your financial team will not accept the approach of the accounts of the logic? He is the obvious solution to your problem. FDM or FDMEE, you can only load on the data at the intersection of a target element. If you want to load the same piece of data at several intersections in the target, then you need to have this piece of data repeated in data sources n then you will need something in the source that could identify how unique each copy so you can map correctly. As noted it is one of the main functions of the accounts of the logic, other approaches are likely to be messy, more prone to error and much harder to verify.

• Can I move all the objects again selected layer without clicking hundreds of layer bars?

  I'm working on a complex illustrator file generated by GIS software. He gave me all kinds of groups of clip & road clip - what I really need, it's just to put all the same coloured polygons on the layer of a high level (unfortunately I can't draw all of my polygons in a group because illustrator doesn't pull these objects out of their existing clipping groups, and the card gets screwed completely upward if I release the clipping masks. With simple cards I have no problem Direct by selecting all of the polygons, I want, selecting their layers in the layers panel, then moving them to a new layer. This card is too complex, because there are hundreds of objects and hundreds of corresponding layers (they are not contiguous, or else I could simply click can be done with it).

  
  

  I used select > same > fill type to select all the polygons, I want that on a single layer, but I really hope that I don't have to select all the layers for each item one by one before I can move them to a new higher level layer. Does anyone know if there is a way to moving all the objects in a new layer selected without having to actually click all the layers in the Panel? Completely open to the alternative routes to my desired result!

  
  

  Thank you very much.
  
  

  Of course, after making the selection drag selection (to the right of the layer) icon on the desired layer. This will move any selected layer to the new layer.

  

• How to make a vector shape / layer in a mask without pixelation it?

  Watching Nigel French on Lynda.com transform a form (using the custom shape tool) in a mask, but following the same exact procedure he does not work for me:

  Select a new layer, press U, select Custom Shapes, has chosen to target record, size and release.

  Voila! In the video, he gets a layer mask on this new layer. I just get a new layer - and it's driving me crazy. He goes on to pen the layer to soften the edges, which, if it is possible, can be useful.

  I tried half a dozen variations such as drag and drop, creating a new layer from a solid fill color and me cannot work out how to make the shape in a mask. Can someone tell me what I am doing wrong? I'm guessing that there is a setting I'm missing somewhere, maybe?

  just to be clear, I know that I can put a mask on my vector form by clicking on the icon of the mask or of the layer > vector mask > current path, but this is not what I'm asking. I want to know how to make the shape I paint in a mask on a layer, we layer (as in the right of it).

  If you can see, the video is here at the minute mark 7: create a logo with some shape layers in the Photoshop course for designers: shape layers

  The transcript over this article reads

  I want to fill the shape with white. So I'll do my foreground color white and press the Option or Alt + Delete as follows, and I also want to then adjust the opacity. I'll take the opacity down and here's something I want to do. I would like to pen, so that make us it sweet. Now, you may be thinking, wait a minute, all these layers of shape are vectors, how can they be feathered? Surely, they cannot be softened. Well, actually, they can.

  If we go to the masks Panel, I can simply increase the amount of feathering and you can see as I do he soft all edges in this path. Now another problem I have is that the inside of this shape of the target is displayed in the center of the bagel and we do not want that to happen. So I could spend time trying to position it just so, so that we don't see. But easier than that I'll just double-click my masks to make it smaller.

  Without having read what you have written here, I just Ctrl + click on the content icon in the palette shape layer layers to select the transparency of the layer.  This selection allows you to hide a layer in the layer to hide targetint then click on the Add layer mask in the layers palette.  The current selection will be used to create the layer mask.

• Photoshop CS5 color and gradients cards selector

  I painted a picture in black and white and put a layer of setting summary card on top to test some colors for the final image.

  I put the color for "active layer" selector to keep paint on black and white background layer to achieve the levels of law without actually using color.

  But as soon as I open again the summary card, the colorpicker selects ONLY the colors of the layer of setting card summary.

  Even if I disable or REMOVE the map summary, the color guard selector choose the colors of the gradient map, i.e. without ANY color in the whole of the document.

  This seems to be a bug. Can someone confirm this behavior?

  

  Don't get that...

  If I have the current layer to sample, I have not yet turn off the visibility of my gradient map to get black and white tones out of my background.  I would try to reset my eyedropper tool. If this does not work, try resetting your Photoshop preference files as sometimes simply reset tool is not the case.

• could not draw a custom in PF_Window_LAYER user interface

  Now I'm developing a custom user interface plugin.

  I draw a red circle or a green rectangle in a layer window as a custom for my objects handling control.

  There is no problem to draw a custom in a composition window user interface (w_type == PF_Window_COMP)

  But I failed to draw a custom in a layer window user interface (w_type == PF_Window_LAYER).

  To ParamsSetup(), I put PF_CustomEFlag_LAYER to ci.events.

  Transformations of coordinates works well (I think).

  It just seems to not catch a PF_Event_DRAW.

  Why?

  I tried the simple example of custom user interface, "CCU" plugin which is included in an AESDK (CS3).

  Also, CCU plugin seems do not draw a custom in a layer window user interface.

  AE CS3 and AE CS3 of SDK.

  Visual Studio 2005 Pro

  Win XP SP3 32-bit

  Hi dfurusaka.

  as far as I know, it's a bug in cs3 and cs4, which has been fixed in cs5.

  order some other plug-ins that have an interface user custom, like 'meshwarp' or 'vector paint. they don't too draw in the window of layer on cs3 and cs4.

  If I remember correctly (it was a long time ago), I looked inside and saw that the plug-ins receive a call for display, but the return buffer is simply ignored by AE.

  I have never tried to solve this problem, so I can't tell you if there is a solution, or it's just something you have to accept.

  Well, at least you know that it works in cs5...

• PDF from Illustrator has not been replaced in layer in ID...

  Hello

  I want to put PDF in new layers in an InDesign document. All the layers are the same data (card), but they are not reduced. As when you press command-D to put something in InDesign, you'll need to resize it yourself...

  The document that I work with already has the updated object to scale, but when I place the new layers (of the same card) I have to manually set each box and scale...

  
  I have about 8 layers which correspond to the other that will take a long time (as the map is large)

  The solution I found that worked (for 1 layer) was to simply duplicate the original layer eight times (which already has balance, etc), import different pages of the PDF, but replacing the selected item that retains the attributes of the scaling and rotation. It worked great for a single layer, which is a layer of the card that had already been made by a professional. I just added several layers to the same sheet, which is where I have problems when you place inside the code. The layers just not dimensionnera, even if they are the same file format etc that layer that has worked.

  
  I used the size and X / Y coordinates, but who did not work for some reason any...

  Thank you

  You place the map file must have the layers, so you can show/hide the. Your ID file will end up with several layers, but can start with a, which you will duplicate for each layer in the map that you want to display a separate item, or if you print this on acetate, instead of duplicating the layer, duplicate the page and display a different layer on each page.

  I sent you a link to a demo file with a simple card with about 20 layers. I did three layers in the ID file and show the mass of the Earth on a single layer, the limits of the city and the names on one another and main roads on a third. There are other layers hidden with secondary roads that you can enable if you wish (this card is used to obtain a brochure for a local cooperative and secondary roads are there to locate members who do not live on a main road). I normally add location pointers and references ID numbers to use in conjunction with the list of members, but under normal circumstances, I would have only one instance of the card with all the layers I need display.

  Let me know if you still have questions after that you played with the sample.